summaryrefslogtreecommitdiffstats
path: root/sound/soc
Commit message (Collapse)AuthorAgeFilesLines
...
* | | ASoC: Fabric bindings for STAC9766 on the EfikaJon Smirl2009-05-263-0/+99
| | | | | | | | | | | | | | | Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Support for AC97 on Phytec pmc030 base board.Jon Smirl2009-05-263-0/+100
| | | | | | | | | | | | | | | | | | | | | A wm9712 AC97 codec is used. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: AC97 driver for mpc5200Jon Smirl2009-05-264-0/+358
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I've implemented retries for when the AC97 hardware doesn't reset on first try. About 10% of the time both the Efika and pcm030 AC97 codecs don't reset on first try and need to be poked multiple times. Failure is indicated by not having the link clock start ticking. Every once in a while even five pokes won't get the link started and I have to power cycle. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Main rewite of the mpc5200 audio DMA codeJon Smirl2009-05-265-391/+344
| | | | | | | | | | | | | | | | | | | | | | | | Rewrite the mpc5200 audio DMA code to support both I2S and AC97. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: TWL4030: HandsfreeL/R mute DAPM switchPeter Ujfalusi2009-05-251-2/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add DAPM switch for HeadsetL/R mute. Since all bits are are needed for the HFL/R pop removal to work the switch is using the SW_SHADOW no HW register for the HandsfreeL/R mute. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: TWL4030: Add shadow registerPeter Ujfalusi2009-05-252-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | Shadow, non HW register for dealing with the HandsfreeL/R muting. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: TWL4030: Handsfree pop removal redesignPeter Ujfalusi2009-05-251-19/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the HandsfreeL/R (IHFL/R) pop removal code from the DAPM_MUX_E to a more appropriate DAPM_PGA_E widget. Also fix the power-up sequence to match with the TRM. The power-down sequence is not described in the TRM, so do it in a way, which seams like the correct sequence. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Rename the PSC functions to DMAJon Smirl2009-05-243-190/+190
| | | | | | | | | | | | | | | | | | | | | | | | | | | Rename the functions in the mpc5200 DMA file from i2s based names to dma ones to reflect the file they are in. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Basic split of mpc5200 DMA code out of mpc5200_psc_i2sJon Smirl2009-05-245-483/+547
| | | | | | | | | | | | | | | | | | | | | | | | Basic split of mpc5200 DMA code out from i2s into a standalone file. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Fix minor issues in STAC9766 driverMark Brown2009-05-241-36/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fairly minor issues: - Don't register the DAIs, it's not required for AC97 devices. - Make unexported functions static. - Wrap some excessively long lines. - Undo tab/space breakage. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Codec for STAC9766 used on the EfikaJon Smirl2009-05-244-0/+497
| | | | | | | | | | | | | | | | | | | | | Datasheet: http://www.idt.com/products/getDoc.cfm?docID=13134007 Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Fix WM9081 PowerPC compiler issuesMark Brown2009-05-231-2/+4
| | | | | | | | | | | | | | | | | | | | | Ensure that we always set a new sysclk when using the FLL in master mode and pick out the correct value for the sample rate in hw_params(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: WM9081 mono DAC with integrated 2.6W class AB/D amplifier driverMark Brown2009-05-224-0/+2325
| | | | | | | | | | | | | | | | | | | | | The WM9081 is designed to provide high power output at low distortion levels in space-constrained portable applications. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: TWL4030: Differentiate the playback streamsPeter Ujfalusi2009-05-221-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | Give unique stream names for the two playback streams so DAPM can figure out which codec_dai is in use. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: SDP4030: Use the twl4030_setup_data for headset pop-removalPeter Ujfalusi2009-05-221-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | With this patch the initial headset pop-removal related values are configured for the twl4030 codec (ramp delay and sysclk). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: TWL4030: Add support for platform dependent configurationPeter Ujfalusi2009-05-222-3/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | twl4030_setup_data structure can be passed from platform drivers to the codec via the snd_soc_device->codec_data pointer. Currently the setup data has support for the Headset pop-removal related configuration, which differs from board to board. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: TWL4030: Move the Headset pop-attenuation code to PGA eventPeter Ujfalusi2009-05-201-25/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds SND_SOC_DAPM_PGA_E to the headset path, which handles the headset ramp up and down sequences needed for the pop noise removal. With this patch the order of the internal components in the twl4030 codec is turned on and off in a correct order. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Tested-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Tested-by: Jarkko Nikula <jhnikula@gmail.com> Tested-by: Misael Lopez Cruz <x0052729@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: TWL4030: Change DAPM routings and controls for DACs and PGAsPeter Ujfalusi2009-05-201-70/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Restructuring the twl4030 codec's DAPM routing to be able to handle the power sequences correctly. The twl4030 codec internal implementation have this order: DAC -> Analog PGA -> Mixer/Mux While the ASoC framework expects the following order: DAC -> Mixer -> Analog PGA This patch moves the Analog PGA handling from SND_SOC_DAPM_PGA to _MIXER and adds two levels of mixer to handle the digital and analog loopback functionality. Now the analog loopback does not powers on any of the DACs. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Tested-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Tested-by: Jarkko Nikula <jhnikula@gmail.com> Tested-by: Misael Lopez Cruz <x0052729@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Add TXx9 AC link controller driver (v3)Atsushi Nemoto2009-05-198-0/+908
| | | | | | | | | | | | | | | | | | | | | This patch adds support for the integrated ACLC of the TXx9 family. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: SDP3430: Connect twl4030 voice DAI to McBSP3Lopez Cruz, Misael2009-05-191-10/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Connect twl4030 voice DAI to McBSP3 in sdp3430 machine driver. Voice DAI init function enables corresponding interface by writting directly to VOICE_IF codec register. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Acked-by: Peter Ujflausi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: TWL4030: Add control for selecting codec operation modeLopez Cruz, Misael2009-05-191-0/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a control for selecting the codec operation mode. TWL4030 codec has two modes: - Option 1. Audio only (4 audio DACs) - Option 2. Voice/Audio (2 audio DACs and voice ADC/DAC) Control is restricted when a stream is ongoing, since codec's operation mode cannot be changed on-the-fly. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Acked-by: Peter Ujflausi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: TWL4030: Fix Analog capture path for AUXRPeter Ujfalusi2009-05-191-1/+1
| | | | | | | | | | | | | | | | | | | | | AUXR is selected by bit 2 and not by bit 1 in the ANAMICR register. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Add debug trace for bias level transitionsMark Brown2009-05-181-0/+18
| | | | | | | | | | | | | | | | | | A standard way of making sure we know when the bias level changes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Integrate bias management with DAPM power managementMark Brown2009-05-182-75/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than managing the bias level of the system based on if there is an active audio stream manage it based on there being an active DAPM widget. This simplifies the code a little, moving the power handling into one place, and improves audio performance for bypass paths when no playbacks or captures are active. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Make DAPM sysfs entries non-optionalMark Brown2009-05-181-9/+1
| | | | | | | | | | | | | | | | | | sysfs is so standard these days there's no point. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Split DAPM power checks from sequencing of power changesMark Brown2009-05-181-25/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DAPM has always applied any changes to the power state of widgets as soon as it has determined that they are required. Instead of doing this store all the changes that are required on lists of widgets to power up and down, then iterate over those lists and apply the changes. This changes the sequence in which changes are implemented, doing all power downs before power ups and always using the up/down sequences (previously they were only used when changes were due to DAC/ADC power events). The error handling is also changed so that we continue attempting to power widgets if some changes fail. The main benefit of this is to allow future changes to do optimisations over the whole power sequence and to reduce the number of walks of the widget graph required to check the power status of widgets. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: TWL4030: Enable/disable voice digital filtersMisael Lopez Cruz2009-05-182-1/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable TWL4030 VTXL/VTXR and VRX digital filters for uplink and downlink paths, respectively. This patch also corrects voice 8/16kHz mode selection bit (SEL_16K) of CODEC_MODE register. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | sound: use dev_set_drvdataJulia Lawall2009-05-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Eliminate direct accesses to the driver_data field. cf 82ab13b26f15f49be45f15ccc96bfa0b81dfd015 The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct device *dev; expression E; type T; @@ - dev->driver_data = (T)E + dev_set_drvdata(dev, E) @@ struct device *dev; type T; @@ - (T)dev->driver_data + dev_get_drvdata(dev) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ASoC: Optimize switch/case in magician.cTakashi Iwai2009-05-151-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use default to optimize the switch/case in magicial_playback_hw_params(), which also fixes the compile warnings below: sound/soc/pxa/magician.c:89: warning: 'acds' may be used uninitialized in this function sound/soc/pxa/magician.c:89: warning: 'acps' may be used uninitialized in this function Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | ASoC: Add missing __devexit in wm8940.cTakashi Iwai2009-05-151-1/+1
| | | | | | | | | | | | Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | Merge branch 'for-2.6.30' into for-2.6.31Mark Brown2009-05-154-46/+121
|\ \ \ | |/ /
| * | ASoC: DaVinci EVM board support buildfixesDavid Brownell2009-05-152-14/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a build fix, resyncing the DaVinci EVM ASoC board code with the version in the DaVinci tree. That resync includes support for the DM355 EVM, although that board isn't yet in mainline. (NOTE: also includes a bugfix to the platform_add_resources call, recently sent by Chaithrika U S <chaithrika@ti.com> but not yet merged into the DaVinci tree.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * | ASoC: DaVinci I2S updatesDavid Brownell2009-05-151-3/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This resyncs the DaVinci I2S code with the version in the DaVinci tree. The behavioral change uses updated clock interfaces which recently merged to mainline. Two other changes include adding a comment on the ASP/McBSP/McASP confusion, and dropping pdev->id in order to support more boards than just the DM644x EVM. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * | ASoC: davinci-pcm buildfixesDavid Brownell2009-05-151-29/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a buildfix for the DaVinci PCM code, resyncing it with the version in the DaVinci tree. The notable change is using current EDMA interfaces, which recently merged to mainline. (The older interfaces never made it into mainline.) NOTE: open issue, the DMA should be to/from SRAM; see chip errata for more info. The artifacts are extremely easy to hear on DM355 hardware (not yet supported in mainline), but don't seem as audible on DM6446 hardwaare (which does have mainline support). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Support AC97 link off by default on WM9712Marek Vasut2009-05-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The WM9712 can be configured by resistor strapping GPIO4 to behave like the WM9713 and default to leaving the AC97 link disabled after cold reset until a warm reset occurs. In this configuration we need to issue a warm reset after cold to bring the link up so do so. The warm reset will be harmless on systems that don't need it. [Changelog rewritten to document the reasoning. -- broonie] Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | Merge branch 'pxa2xx-i2s' into for-2.6.31Mark Brown2009-05-141-16/+9
|\ \ \
| * | | ASoC: pxa2xx-i2s: Fix suspend/resumeKarl Beldan2009-05-141-8/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pxa2xx_i2s_resume is : - unconditionnaly setting SACR0_ENB - unsetting SACR0_ENB in saved SACR0 pxa_i2s.sacr0 fix these. In pxa2xx_i2s_{resume,suspend}, save/restore registers even when !dai->active. Signed-off-by: Karl Beldan <karl.beldan@mobile-devices.fr> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * | | ASoC: pxa2xx-i2s: Fix inappropriate release of i2s clockKarl Beldan2009-05-141-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2s_clk is 'put' for no reason in pxa2xx_i2s_shutdown. Now we 'get' i2s_clk at probe and 'put' it at driver removal or when probe fails. Signed-off-by: Karl Beldan <karl.beldan@mobile-devices.fr> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * | | ASoC: pxa2xx-i2s: Handle SACR1_DRPL and SACR1_DREC separatelyKarl Beldan2009-05-141-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - hw_params enables both RPL and REC functions each time : Enable the appropriate function in pxa2xx_i2s_trigger. - pxa2xx_i2s_shutdown disables i2s anytime one of RPL or REC function is off : Turn it off only when both functions are off. Signed-off-by: Karl Beldan <karl.beldan@mobile-devices.fr> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * | | ASoC: pxa2xx-i2s: Proper hw initializationKarl Beldan2009-05-141-3/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure we are in a know good state at end of probe : Reset FIFO logic and registers, and make sure REC and RPL functions along with FIFO service are disabled (SACR0_RST enables REC and RPL). Resetting loses current settings so remove reset from stream startup. Now reset occurs only at probe. Signed-off-by: Karl Beldan <karl.beldan@mobile-devices.fr> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | | ASoC: Added OMAP3 EVM support in ASoC.Anuj Aggarwal2009-05-143-0/+157
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Resending the patch after fixing the minor issues. Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | | ASoC: pxa2xx-i2s: Proper initializationKarl Beldan2009-05-131-0/+13
|/ / / | | | | | | | | | | | | | | | | | | | | | Reset FIFO logic and registers, and make sure REC and RPL functions along with FIFO service are disabled at probe. Signed-off-by: Karl Beldan <karl.beldan@mobile-devices.fr> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | Merge branch 'for-2.6.30' into for-2.6.31Mark Brown2009-05-121-0/+3
|\ \ \ | |/ /
| * | ASoC: soc-core: fix crash when removing not instantiated cardMike Rapoport2009-05-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the card was not instantiated in snd_soc_instantiate_card, calling soc-remove will crash because some of codec, cpu_dai and card .remove methods are called twice. Fix this by returning from soc_remove immediately. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: TWL4030: change DAPM for analog microphone selectionJoonyoung Shim2009-05-121-33/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The inputs of the twl4030 codec can be mixed, so we will use the mixer DAPM for the analog microphone registers(0x05, 0x06), but if we enable more than one input at the same time, the input impedance of the input amplifier will be reduced. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Enforce symmetric rates for PXA2xx I2SMark Brown2009-05-121-0/+1
| | | | | | | | | | | | | | | | | | There is a single I2S_SYNC pin on the chip. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: em-x270: make the driver support also eXeda and CM-X300 machinesMike Rapoport2009-05-122-6/+7
| | | | | | | | | | | | | | | Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: remove driver_data direct access of struct deviceRoel Kluin2009-05-113-6/+6
| | | | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Fix up CODEC DAI formats for big endian CPUsMark Brown2009-05-091-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ASoC uses the standard ALSA data format definitions to specify the wire format used between the CPU and CODEC. Since the ALSA data formats all include the endianess of the data but this information is not relevant by the time the data has been encoded onto the serial link to the CODEC this means that either all the CODEC drivers need to declare both big and little endian variants or the core needs to fix up the format constraints specified by CODEC drivers. For now take the latter approach - this will need to be revisited if any CODECs are endianness dependant. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: AFEB9260 driverSergey Lapin2009-05-083-0/+212
| | | | | | | | | | | | | | | | | | | | | ASoC driver for AT91SAM9260-based AFEB9260 board Signed-off-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
OpenPOWER on IntegriCloud