summaryrefslogtreecommitdiffstats
path: root/sound/pci/ctxfi/ctatc.c
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: pci: Convert to snd_card_new() with a device pointerTakashi Iwai2014-02-121-2/+0
| | | | | | Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ctxfi - Work around emu20k1 glitch to prevent buffered sound data lossSarah Bessmer2014-01-101-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Occasionally, on playback stream ringbuffer wraparound, the EMU20K1 hardware will momentarily return 0 instead of the proper current(loop) address. This patch handles that case, fixing the problem of playback position corruption and subsequent loss of buffered sound data, that occurs with some common buffering layout patterns(e.g. multiple simultaneous output streams with differently-sized or non-power-of-2-sized buffers). An alternate means of fixing the problem would be to read the ca register continuously, until two sequential reads return the same value; however, that would be a more invasive change, has performance implications, and isn't necessary unless there are also issues with the value not being updated atomically in regards to individual bits or something similar(which I have not encountered through light testing). I have no EMU20K2 hardware to confirm if the issue is present there, but even if it's not, this change shouldn't break anything that's not already broken. Signed-off-by: Sarah Bessmer <aotos@fastmail.fm> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: pci: remove __dev* attributesBill Pemberton2012-12-071-10/+10
| | | | | | | | | | | CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'for-linus' into for-nextTakashi Iwai2012-08-201-1/+3
|\ | | | | | | | | | | | | Conflicts: sound/pci/hda/hda_codec.c Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * ALSA: sound/pci/ctxfi/ctatc.c: fix error return codeJulia Lawall2012-08-201-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initialize err before returning on failure, as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: PCI: Replace CONFIG_PM with CONFIG_PM_SLEEPTakashi Iwai2012-08-141-2/+2
|/ | | | | | Otherwise we may get compile warnings due to unused functions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: Convert to new pm_ops for PCI driversTakashi Iwai2012-07-031-2/+2
| | | | | | | | | | Straightforward conversion to the new pm_ops from the legacy suspend/resume ops. Since we change vx222, vx_core and vxpocket have to be converted, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ctxfi: Implement a combined capabilities query method to replace ↵Harry Butterworth2011-06-141-28/+3
| | | | | | | multiple have_x query methods. Signed-off-by: Harry Butterworth <heb1001@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ctxfi: Add support for Creative Titanium HDHarry Butterworth2011-06-141-32/+92
| | | | | | | | | | | | | | | | Initialise model-specific DAC and ADC parts. Add controls for output and mic source selection. Rename some mixer controls according to ControlNames.txt. Remove Playback switches for Line-in and IEC958-in - these were controlling the input mute/unmute which affected capture too. Use the capture switches to control the input mute/unmute instead - it's less confusing. Initialise the WM8775 to invert the left-right clock to swap the left and right channels of the mic and aux input. Signed-off-by: Harry Butterworth <heb1001@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Fix common misspellingsLucas De Marchi2011-03-311-1/+1
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* ALSA: ctxfi - Fix incorrect SPDIF status bit maskPrzemyslaw Bruski2011-03-141-1/+1
| | | | | | | | SPDIF status mask creation was incorrect. Signed-off-by: Przemyslaw Bruski <pbruskispam@op.pl> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* Merge branch 'topic/misc' of ↵Jaroslav Kysela2010-02-161-8/+15
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into devel
| * ALSA: ctxfi - Add subsystem optionTakashi Iwai2010-01-141-8/+15
| | | | | | | | | | | | | | Added a new option "subsystem" to override the PCI SSID for identifying the card type. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: ctxfi - fix PTP address initializationJaroslav Kysela2010-02-041-13/+2
|/ | | | | | | | | | | After hours of debugging, I finally found the reason why some source and runtime combination does not work. The PTP (page table pages) address must be aligned. I am not sure how much, but alignment to PAGE_SIZE is sufficient. Also, use ALSA's page allocation routines to ensure proper virtual -> physical address translation. Cc: <stable@kernel.org> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* Merge branch 'fix/misc' into topic/miscTakashi Iwai2009-11-011-2/+2
|\
| * ALSA: ctxfi: Swapped SURROUND-SIDE muteSven Eckelmann2009-10-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | On Soundblaster X-FI Titenium with emu20k2 the SIDE and SURROUND mute functions are swapped. It was checked with 'speaker-test -c 8 -s 3' and (un)mute surround or 'speaker-test -c 8 -s 7' and (un)mute side. The volume seems not to be affected and works as expected. Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: Cleanup redundant tests on unsignedRoel Kluin2009-10-301-1/+1
|/ | | | | | | | | | | | The variables are unsigned so the test `>= 0' is always true, the `< 0' test always fails. In these cases the other part of the test catches wrapped values. In dac_audio_write() there does not occur a test for wrapped values, but the test appears redundant. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ctxfi - Simple code clean upTakashi Iwai2009-07-221-39/+38
| | | | | | | | - replace NULL == xxx with !xxx - replace NULL != xxx with xxx - similar trivial cleanups Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ctxfi - Add PM supportWai Yew CHAY2009-06-221-48/+133
| | | | | | | | | | | | Added the suspend/resume support to ctxfi driver. The team tested on the following seems ok: AMD Athlon 64 3500+ / ASUS A8N-E / 512MB DDR ATI / Radeon X1300 20k1 & 20k2 cards Signed-off-by: Wai Yew CHAY <wychay@ctl.creative.com> Singed-off-by: Ryan RICHARDS <ryan_richards@creativelabs.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ctxfi - Allow unknown PCI SSIDsTakashi Iwai2009-06-221-6/+19
| | | | | | | | Allow unknown PCI SSIDs for emu20k1 and emu20k2 as "unknown" model. Also, add a black-list check in case any device has to be listed as "unsupported". It has a negative value in the pci quirk entry. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ctxfi - Replace atc lock to mutexTakashi Iwai2009-06-131-13/+9
| | | | | | | | | | | | | | | | | | | | | | | | The spinlock in atc can cause a sleep in lock: Kernel failure message 1: BUG: sleeping function called from invalid context at mm/slub.c:1599 in_atomic(): 0, irqs_disabled(): 1, pid: 2537, name: gstreamer-prope Pid: 2537, comm: gstreamer-prope Tainted: P 2.6.29.4-167.fc11.x86_64 #1 Call Trace: [<ffffffff8103ff0f>] __might_sleep+0x10b/0x110 [<ffffffff810cd734>] __kmalloc+0x73/0x130 [<ffffffffa0b4b142>] ? daio_rsc_init+0xaa/0x125 [snd_ctxfi] [<ffffffffa0b4b212>] dao_rsc_init+0x55/0x1c0 [snd_ctxfi] [<ffffffffa0b4b3d2>] dao_rsc_reinit+0x55/0x5d [snd_ctxfi] [<ffffffff813abd6c>] ? _spin_lock_irqsave+0x32/0x3b [<ffffffffa0b454fe>] atc_spdif_out_passthru+0x92/0x136 [snd_ctxfi] ... Since the lock path is no critical path, it can be gracefully replaced with a mutex. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ctxfi - Clear PCM resources at hw_params and hw_freeTakashi Iwai2009-06-091-2/+2
| | | | | | | | | | | | Currently the PCM resources are allocated only once and ever in prepare callback, assuming that the PCM parameters are never changed. But it's not true. This patch adds the call of atc->pcm_release_resources() at hw_params and hw_free callbacks to assure that the PCM setup is done correctly for each h/w parameter changes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ctxfi - Check the presence of SRC instance in PCM pointer callbacksTakashi Iwai2009-06-091-0/+4
| | | | | | | | The SRC instances may not exist when PCM pointer callback is called at the state before initialization is finished. Add the NULL check just to be sure. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ctxfi - Add missing start check in atc_pcm_playback_start()Takashi Iwai2009-06-091-0/+4
| | | | Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ctxfi - Fix wrong model id for UAATakashi Iwai2009-06-081-4/+5
| | | | | | | CTUAA should be checked instead of CTHENDRIX. The latter is for 20k2 chip. Also, fixed the detection of UAA/HENDRIX models by fixing the mask bits. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ctxfi - Clean up probe routinesTakashi Iwai2009-06-081-73/+59
| | | | | | | Clean up probe routines and model detection routines so that the driver won't call and check the PCI subsystem id at each time. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ctxfi - Remove useless initializations and castTakashi Iwai2009-06-081-80/+84
| | | | | | | Remove useless variable initializations and cast at the beginning of functions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ctxfi - Clean up / optimizeTakashi Iwai2009-06-051-43/+39
| | | | | | | | | | - Use static tables instead of assigining each funciton pointer - Add __devinit* to appropriate places; pcm, mixer and timer cannot be marked because they are kept in the function table that lives long - Move create_alsa_devs function out of struct ct_atc to mark it __devinit Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ctxfi - Use native timer interrupt on emu20k1Takashi Iwai2009-06-051-1/+20
| | | | | | | | | | | emu20k1 has a native timer interrupt based on the audio clock, which is more accurate than the system timer (from the synchronization POV). This patch adds the code to handle this with multiple streams. The system timer is still used on emu20k2, and can be used also for emu20k1 easily by changing USE_SYSTEM_TIMER to 1 in cttimer.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ctxfi - Support SG-buffersTakashi Iwai2009-06-021-1/+1
| | | | | | Use SG-buffers instead of contiguous pages. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ctxfi - Fix supported PCM formatsTakashi Iwai2009-06-021-3/+2
| | | | | | | | | | The device seems supporting only U8, S16, S24_3LE, S32. Other linear formats result in bad outputs. Also, added the support for 32bit float format, which wasn't listed in the original code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ctxfi - Fix PCM device namingTakashi Iwai2009-06-021-4/+4
| | | | | | | PCM names for surround streams should be also fixed as well as the mixer element names. Also, a bit clean up for PCM name setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ALSA: ctxfi - Release PCM resources at each prepare callTakashi Iwai2009-06-021-0/+9
| | | | | | | | | | | The prepare callback can be called multiple times, thus it needs to release and acquire the resource again by itself at the second or later call. Simply add pcm_release_resources() at the beginning of each prepare callback in ctatc.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ctxfi - Fix Oops at mmappingTakashi Iwai2009-06-021-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace a spinlock with a mutex protecting the vm block list at mmap / munmap calls, which caused Oops like below: BUG: sleeping function called from invalid context at mm/slub.c:1599 in_atomic(): 0, irqs_disabled(): 1, pid: 32065, name: xine Pid: 32065, comm: xine Tainted: P 2.6.29.4-75.fc10.x86_64 #1 Call Trace: [<ffffffff81040685>] __might_sleep+0x105/0x10a [<ffffffff810c9fae>] kmem_cache_alloc+0x32/0xe2 [<ffffffffa08e3110>] ct_vm_map+0xfa/0x19e [snd_ctxfi] [<ffffffffa08e1a07>] ct_map_audio_buffer+0x4c/0x76 [snd_ctxfi] [<ffffffffa08e2aa5>] atc_pcm_playback_prepare+0x1d7/0x2a8 [snd_ctxfi] [<ffffffff8105ef3f>] ? up_read+0x9/0xb [<ffffffff81186b61>] ? __up_read+0x7c/0x87 [<ffffffffa08e36a6>] ct_pcm_playback_prepare+0x39/0x60 [snd_ctxfi] [<ffffffffa0886bcb>] snd_pcm_do_prepare+0x16/0x28 [snd_pcm] [<ffffffffa08867c7>] snd_pcm_action_single+0x2d/0x5b [snd_pcm] [<ffffffffa08881f3>] snd_pcm_action_nonatomic+0x52/0x6a [snd_pcm] [<ffffffffa088a723>] snd_pcm_common_ioctl1+0x404/0xc79 [snd_pcm] [<ffffffff810c52c8>] ? alloc_pages_current+0xb9/0xc2 [<ffffffff810c9402>] ? new_slab+0x1a5/0x1cb [<ffffffff810ab9ea>] ? vma_prio_tree_insert+0x23/0xc1 [<ffffffffa088b411>] snd_pcm_playback_ioctl1+0x213/0x230 [snd_pcm] [<ffffffff810b6c20>] ? mmap_region+0x397/0x4c9 [<ffffffffa088bd9b>] snd_pcm_playback_ioctl+0x2e/0x36 [snd_pcm] [<ffffffff810ddc64>] vfs_ioctl+0x2a/0x78 [<ffffffff810de130>] do_vfs_ioctl+0x462/0x4a2 [<ffffffff81029cef>] ? default_spin_lock_flags+0x9/0xe [<ffffffff81374647>] ? trace_hardirqs_off_thunk+0x3a/0x6c [<ffffffff810de1c5>] sys_ioctl+0x55/0x77 [<ffffffff8101133a>] system_call_fastpath+0x16/0x1b Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ctxfi - Add prefix to debug printsTakashi Iwai2009-05-141-7/+9
| | | | | | Added ctxfi: prefix to each debug print. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ctxfi - Avoid unneeded pci_read_config_*() callsTakashi Iwai2009-05-141-6/+6
| | | | | | | Use struct pci subsystem_device and revision fields instead of unneeded calls of pci_read_config_*(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: ctxfi - Move PCI ID definitions to linux/pci_ids.hTakashi Iwai2009-05-141-8/+9
| | | | Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: SB X-Fi driver mergeWai Yew CHAY2009-05-141-0/+1605
The Sound Blaster X-Fi driver supports Creative solutions based on 20K1 and 20K2 chipsets. Supported hardware : Creative Sound Blaster X-Fi Titanium Fatal1ty® Champion Series Creative Sound Blaster X-Fi Titanium Fatal1ty Professional Series Creative Sound Blaster X-Fi Titanium Professional Audio Creative Sound Blaster X-Fi Titanium Creative Sound Blaster X-Fi Elite Pro Creative Sound Blaster X-Fi Platinum Creative Sound Blaster X-Fi Fatal1ty Creative Sound Blaster X-Fi XtremeGamer Creative Sound Blaster X-Fi XtremeMusic Current release features: * ALSA PCM Playback * ALSA Record * ALSA Mixer Note: * External I/O modules detection not included. Signed-off-by: Wai Yew CHAY <wychay@ctl.creative.com> Singed-off-by: Ryan RICHARDS <ryan_richards@creativelabs.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
OpenPOWER on IntegriCloud