summaryrefslogtreecommitdiffstats
path: root/sound/firewire/digi00x
Commit message (Collapse)AuthorAgeFilesLines
* vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds2018-02-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* sound: annotate ->poll() instancesAl Viro2017-11-271-2/+2
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland2017-10-251-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
* ALSA: firewire: arrange common PCM info/constraints for AMDTP engine ↵Takashi Sakamoto2017-06-081-22/+11
| | | | | | | | | | | | applications In ALSA firewire stack, 8 drivers uses IEC 61883-1/6 engine for data transmission. They have common PCM info/constraints and duplicated codes. This commit unifies the codes into fireiwre-lib. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire: process packets in 'struct snd_pcm_ops.ack' callbackTakashi Sakamoto2017-06-071-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In recent commit for ALSA PCM core, some arrangement is done for 'struct snd_pcm_ops.ack' callback. This is called when appl_ptr is explicitly moved in intermediate buffer for PCM frames, except for some cases described later. For drivers in ALSA firewire stack, usage of this callback has a merit to reduce latency between time of PCM frame queueing and handling actual packets in recent isochronous cycle, because no need to wait for software IRQ context from isochronous context of OHCI 1394. If this works well in a case that mapped page frame is used for the intermediate buffer, user process should execute some commands for ioctl(2) to tell the number of handled PCM frames in the intermediate buffer just after handling them. Therefore, at present, with a combination of below conditions, this doesn't work as expected and user process should wait for the software IRQ context as usual: - when ALSA PCM core judges page frame mapping is available for status data (struct snd_pcm_mmap_status) and control data (struct snd_pcm_mmap_control). - user process handles PCM frames by loop just with 'snd_pcm_mmap_begin()' and 'snd_pcm_mmap_commit()'. - user process uses PCM hw plugin in alsa-lib to operate I/O without 'sync_ptr_ioctl' option. Unfortunately, major use case include these three conditions. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire: remove support for 16 bit PCM samples in playback substreamTakashi Sakamoto2017-05-223-68/+3
| | | | | | | | | | | | | | | | | | | | | | | | | In IEC 61883-6, AM824 is described as format of data block. In this format, one data block consists of several data channels, which is aligned to 32 bit. One data channel has 8 bit label field and 24 bit data field. PCM frames are transferred in Multi Bit Linear Audio (MBLA) data channel. This channel can include 16/20/24 bit PCM sample. As long as I know, models which support IEC 61883-1/6 doesn't allow to switch bit length of PCM sample in MBLA data channel. They always transmit/receive PCM frames of 24 bit length. This can be seen for the other models which support protocols similar to IEC 61883-1/6. On the other hand, current drivers for these protocols supports 16 bit length PCM sample in playback substream. In this case, PCM sample is put into the MBLA data channel with 8 bit padding in LSB side. Although 16 bit PCM sample is major because it's in CD format, this doesn't represent device capability as is. This commit removes support for 16 bit PCM samples in playback substream. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x: remove transaction handler for unknown purposeTakashi Sakamoto2017-04-052-77/+17
| | | | | | | | | | | | | For digi00x series, asynchronous transaction is not used to transfer MIDI messages to/from control surface. One of transction handlers in my previous work loses its practical meaning. This commit removes the handler. I note that unit of console type transfers 0x00001000 to registered address of host space when switching to 'standalone' mode. Then the unit generates bus reset. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x: allow user space applications to read/write MIDI ↵Takashi Sakamoto2017-04-051-129/+79
| | | | | | | | | | | | | | | | messages for all ports At a commit c5fcee0373b3 ("ALSA: firewire-digi00x: add MIDI operations for MIDI control port"), I described that MIDI messages for control surface is transferred by a different way from the messages for physical ports. However, this is wrong. MIDI messages to/from all of MIDI ports are transferred by isochronous packets. This commit removes codes to transfer MIDI messages via asynchronous transaction, from MIDI handling layer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x: handle all MIDI messages on streaming packetsTakashi Sakamoto2017-04-051-18/+37
| | | | | | | | | | | | | | | | | | | | | | | | At a commit 9dc5d31cdceb ("ALSA: firewire-digi00x: handle MIDI messages in isochronous packets"), a functionality to handle MIDI messages on isochronous packet was supported. But this includes some of my misunderstanding. This commit is to fix them. For digi00x series, first data channel of data blocks in rx/tx packet includes MIDI messages. The data channel has 0x80 in 8 bit of its MSB, however it's against IEC 61883-6. Unique data format is applied: - Upper 4 bits of LSB represent port number. - 0x0: port 1. - 0x2: port 2. - 0xe: console port. - Lower 4 bits of LSB represent the number of included MIDI message bytes; 0x0/0x1/0x2. - Two bytes of middle of this data channel have MIDI bytes. Especially, MIDI messages from/to console surface are also transferred by isochronous packets, as well as physical MIDI ports. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x: add support for console models of Digi00x seriesTakashi Sakamoto2017-04-052-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Digi00x series includes two types of unit; rack and console. As long as reading information on config rom of Digi 002 console, 'MODEL_ID' field has a different value from the one on Digi 002 rack. We've already got a test report from users with Digi 003 rack. We can assume that console type and rack type has different value in the field. This commit adds a device entry for console type. For following commits, this commit also adds a member to 'struct snd_digi00x' to identify console type. $ cd linux-firewire-utils/src $ python2 ./crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 0404f9d0 bus_info_length 4, crc_length 4, crc 63952 404 31333934 bus_name "1394" 408 60647002 irmc 0, cmc 1, isc 1, bmc 0, cyc_clk_acc 100, max_rec 7 (256) 40c 00a07e00 company_id 00a07e | 410 00a30000 device_id 0000a30000 | EUI-64 00a07e0000a30000 root directory ----------------------------------------------------------------- 414 00058a39 directory_length 5, crc 35385 418 0c0043a0 node capabilities 41c 04000001 hardware version 420 0300a07e vendor 424 81000007 --> descriptor leaf at 440 428 d1000001 --> unit directory at 42c unit directory at 42c ----------------------------------------------------------------- 42c 00046674 directory_length 4, crc 26228 430 120000a3 specifier id 434 13000001 version 438 17000001 model 43c 81000007 --> descriptor leaf at 458 descriptor leaf at 440 ----------------------------------------------------------------- 440 00055913 leaf_length 5, crc 22803 444 000050f2 descriptor_type 00, specifier_ID 50f2 448 80000000 44c 44696769 450 64657369 454 676e0000 descriptor leaf at 458 ----------------------------------------------------------------- 458 0004a6fd leaf_length 4, crc 42749 45c 00000000 textual descriptor 460 00000000 minimal ASCII 464 44696769 "Digi" 468 20303032 " 002" Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar2017-03-021-0/+1
| | | | | | | | | | | | | <linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* ALSA: firewire: Constify snd_rawmidi_opsTakashi Iwai2017-01-121-4/+4
| | | | | | | | Now snd_rawmidi_ops is maintained as a const pointer in snd_rawmidi, we can constify the definitions. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x: enclose identifiers referred by single functionTakashi Sakamoto2017-01-053-64/+57
| | | | | | | | | | | | Some identifiers are referred just by one functions. In this case, they can be put into the function definition. This brings two merits; readers can easily follow codes related to the identifiers, developers are free from name conflict. This commit moves such identifiers to each function definition. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire: constify snd_pcm_ops structuresJulia Lawall2016-09-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check for snd_pcm_ops structures that are only stored in the ops field of a snd_soc_platform_driver structure or passed as the third argument to snd_pcm_set_ops. The corresponding field or parameter is declared const, so snd_pcm_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct snd_pcm_ops i@p = { ... }; @ok1@ identifier r.i; struct snd_soc_platform_driver e; position p; @@ e.ops = &i@p; @ok2@ identifier r.i; expression e1, e2; position p; @@ snd_pcm_set_ops(e1, e2, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; struct snd_pcm_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct snd_pcm_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-lib: enable the same feature as CIP_SKIP_INIT_DBC_CHECK flagTakashi Sakamoto2016-05-101-1/+1
| | | | | | | | | | | | | | In former commit, drivers in ALSA firewire stack always starts IT context before IR context. If IR context starts after packets are transmitted by peer unit, packet discontinuity may be detected because the context starts in the middle of packet streaming. This situation is rare because IT context usually starts immediately. However, it's better to solve this issue. This is suppressed with CIP_SKIP_INIT_DBC_CHECK flag. This commit enables the same feature as CIP_SKIP_INIT_DBC_CHECK. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x: delayed registration of sound cardTakashi Sakamoto2016-03-313-32/+85
| | | | | | | | | | | | When some digi00x units are connected sequentially, userspace applications are involved at bus-reset state on IEEE 1394 bus. In the state, any communications can be canceled. Therefore, sound card registration should be delayed till the bus gets calm. This commit achieves it. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x: Drop bogus const type qualifier on dot_scrt()Geert Uytterhoeven2016-02-091-1/+1
| | | | | | | | | | | sound/firewire/digi00x/amdtp-dot.c:67: warning: type qualifiers ignored on function return type Drop the bogus "const" type qualifier on the return type of dot_scrt() to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x: add another rawmidi character device for MIDI ↵Takashi Sakamoto2015-10-301-54/+50
| | | | | | | | | | | | | | | | control ports Digi 002/003 family uses two ways to transfer MIDI messages. They're different mechanisms, while it's better to handle the ways in different ALSA rawmidi character devices because one character device has just a set of operations. This commit adds another rawmidi character device for control MIDI port. As a result, first rawmidi character device is just for MIDI messages transferred by isochronous packets. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x: add MIDI operations for MIDI control portTakashi Sakamoto2015-10-301-0/+63
| | | | | | | | | | | | | | | | Digi 002/003 family has two types of MIDI port; one is for physical MIDI port and another is for MIDI control message. The former is transferred in isochronous packet, and the latter is transferred by asynchronous transaction. These transmission mechanisms are completely different, while current ALSA digi00x driver defines a set of operations for them with several condition statements. As a result, codes for the operation are messy. This commit adds a set of MIDI operation for control MIDI ports. In later commit, it's applied as an operation for ALSA rawmidi character device. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x: rename identifiers of MIDI operation for physical portsTakashi Sakamoto2015-10-301-24/+28
| | | | | | | | | | | In following commit, new functions and variables are added for operations of MIDI control port. This commit is a preparation. Current identifiers are renamed so that they mean physical MIDI ports. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x/firewire-tascam: remove wrong conversion for Config ROMTakashi Sakamoto2015-10-191-2/+1
| | | | | | | | | | | | | The contents of Config ROM in firewire device structure are already aligned to CPU-endianness. Thus, no need to convert it again. This commit removes needless conversions Fixes: 9edf723fd858('ALSA: firewire-digi00x: add skeleton for Digi 002/003 family') Fixes: c0949b278515('ALSA: firewire-tascam: add skeleton for TASCAM FireWire series') Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x: add support for MIDI ports for physical controlsTakashi Sakamoto2015-10-111-16/+45
| | | | | | | | | | | | | | In former commits, asynchronous transactions are supported for physical controls. This commit adds a pair of MIDI ports for them. This driver already adds diferrent number of ALSA MIDI ports for physical MIDI ports, and the number of in/out ports are different. As seeing as 'amidi' program in alsa-utils package, a pair of in/out MIDI ports is expected with the same name. Therefore, this commit adds a pair of new ports to the first. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x: add support of asynchronous transaction for outgoing ↵Takashi Sakamoto2015-10-112-4/+26
| | | | | | | | | | | | | MIDI messages to physical controls In previous commit, asynchronous transaction for incoming MIDI messages from physical controls is supported. The physical controls may be controlled by receiving MIDI messages at a certain address. This commit supports asynchronous transaction for this purpose. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x: add support of asynchronous transaction for incoming ↵Takashi Sakamoto2015-10-112-3/+41
| | | | | | | | | | | | | | MIDI messages from physical controls Digi 00x series has two types of model; rack and console. The console models have physical controls. The model can transmit control messages. These control messages are transferred by asynchronous transactions to registered address. This commit supports the asynchronous transaction. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x: add support for MIDI ports corresponding to ↵Takashi Sakamoto2015-10-115-1/+140
| | | | | | | | | | | | | | | | | | | | | isochronous packet streaming This commit adds MIDI functionality to capture/playback MIDI messages from/to physical MIDI ports. These messages are transferred in isochronous packets. When no substreams request AMDTP streams to run, this driver starts the streams at current sampling rate. When other substreams start at different sampling rate, the streams are stopped temporarily, then start again at requested sampling rate. This operation can generate missing MIDI bytes, thus it's preferable to start PCM substreams at favorite sampling rate in advance. Digi 002/003 console also has a set of MIDI port for physical controls. These ports are added in later commits. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x: handle MIDI messages in isochronous packetsTakashi Sakamoto2015-10-113-8/+125
| | | | | | | | | | | | | | | | | | | | | | | | In Digi 002/003 protocol, MIDI messages are transferred in the last data channel of data blocks. Although this data channel has a label of 0x80, it's not fully MIDI conformant data channel especially because the Counter field always zero independently of included MIDI bytes. The 4th byte of the data channel in LSB tells the number of included MIDI bytes. This byte also includes the number of MIDI port. Therefore, the data format in this data channel is: * 1st: 0x80 as label * 2nd: MIDI bytes * 3rd: 0 or MIDI bytes * 4th: the number of MIDI byte and the number of MIDI port This commit adds support of MIDI messages in data block processing layer. Like AM824 data format, this data channel has a capability to transfer more MIDI messages than the capability of phisical MIDI bus. Therefore, a throttle for data rate is required to prevent devices' internal buffer to overflow. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x: use in-kernel representation for the type of 8 bitsTakashi Sakamoto2015-10-111-15/+15
| | | | | | | | | | Original code for 'DoubleOhThree' encoding was written with '__u8' type, while the type is usually used to export something to userspace. This commit replaces the type with 'u8'. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x: add support for asynchronous messagingTakashi Sakamoto2015-09-305-3/+107
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Digi 002/003 family uses asynchronous transaction for messaging. The address to transmit this message is stored on a certain register. This commit allocates a range of address on OHCI 1394 host controller to handle the messaging. As long as I know, the purpose of this message seems to notify lost of synchronization. While, the meaning of content of the message is not clear. Actual examples of this messaging: * When clock source is set as internal: - 0x00007051 - 0x00007052 - 0x00007054 - 0x00007057 - 0x00007058 * When clock source is set as somewhat external: - 0x00009000 - 0x00009010 - 0x00009020 - 0x00009021 - 0x00009022 The lost often occurs when using internal clock source. In this case, users hear sounds with quite short gap every several minutes. In fact, the lost is recovered temporarily. When using with external clock source, the lost seems not to occur. The mechanism is not clear yet. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x: add hwdep interfaceTakashi Sakamoto2015-09-306-7/+269
| | | | | | | | | | | | | This commit adds hwdep interface so as the other sound drivers for units on IEEE 1394 bus have. This interface is designed for mixer/control applications. By using this interface, an application can get information about firewire node, can lock/unlock kernel streaming and can get notification at starting/stopping kernel streaming. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x: add PCM functionalityTakashi Sakamoto2015-09-304-1/+370
| | | | | | | | | | | | This commit adds PCM functionality to transmit/receive PCM samples. Any PCM substreams are jointed because incoming/outgoing AMDTP streams are bound. When one of PCM substream is running or external clock source is selected, current sampling rate is used. Else, the sampling rate is changed as an userspace application requests. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x: add proc node to show clock statusTakashi Sakamoto2015-09-304-1/+111
| | | | | | | | | | | | | | | | | | This commit adds proc node to show current clock status for debugging. As long as testing Digi 002 rack, registers can show local clock rate, local clock source. When external clock input such as S/PDIF is connected, the registers show the detection and external clock rate. Additionally, the registers show the mode of optical digital input interface. Although, a tester with Digi 003 rack reports this makes no sense. Further investigation is required for Digi 003 series. Besides, in Digi 002 rack, the S/PDIF format must be IEC 60958-4, so-called professional. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x: add stream functionalityTakashi Sakamoto2015-09-304-2/+461
| | | | | | | | | | | | | | | | | This commit adds a functionality to manage streaming. The streaming is not controlled by CMP in IEC 61883-6. It's controlled by IEEE 1394 write transaction to certain addresses. Several clock sources are available, while there're no differences about packet transmission. The value of SYT field in transmitted packets is always zero. Thus, streams in both direction don't build synchronization. And the device always requires received packets to transmit packets. This driver keeps to transfer outgoing stream even if they're not required. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x: add data block processing layerTakashi Sakamoto2015-09-303-1/+345
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Digi 002/003 family uses its own format for data blocks. The format is quite similar to AM824 in IEC 61883-6, while there're some differences: * The Valid Bit Length (VBL) code is always 0x40 in Multi-bit Linear Audio (MBLA) data channel. * The first data channel includes MIDI messages, against IEC 61883-6 recommendation. * The Counter field is always zero in MIDI conformant data channel. * Sequence multiplexing in IEC 61883-6 is not applied to the MIDI conformant data channel. * PCM samples are scrambled in received AMDTP packets. We call the way as Double-Oh-Three (DOT). The algorithm was discovered by Robin Gareus and Damien Zammit in 2012. This commit adds data processing layer to satisfy these differences. There's a quirk about transmission mode for received packets. When this driver applies non-blocking mode to outgoing packets with isochronous channel 2 or more, after 15 to 20 seconds since playbacking, any PCM samples causes noisy sound on the device. With isochronous channel 0 or 1, this doesn't occur. As long as I investigated, this quirk is not observed when applying blocking mode to the received packets. This driver applies blocking mode to outgoing packets, while non-blocking mode to incoming packgets. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: firewire-digi00x: add skeleton for Digi 002/003 familyTakashi Sakamoto2015-09-303-0/+172
This commit adds a new driver for Digidesign 002/003 family. This commit just creates/removes card instance according to bus event. More functions will be added in following commits. Digidesign 002/003 family consists of: * Agere FW802B for IEEE 1394 PHY layer * PDI 1394L40 for IEEE 1394 LINK layer and IEC 61883 interface * ALTERA ACEX EP1K50 for IEC 61883 layer and DSP controller * ADSP-21065L for signal processing [minor cleanup using skip_spaces() by tiwai] Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
OpenPOWER on IntegriCloud