summaryrefslogtreecommitdiffstats
path: root/net
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: use RCU for TX aggregationJohannes Berg2010-06-148-177/+206
| | | | | | | | | | | | | Currently we allocate some memory for each TX aggregation session and additionally keep a state bitmap indicating the state it is in. By using RCU to protect the pointer, moving the state into the structure and some locking trickery we can avoid locking when the TX agg session is fully operational. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: use RCU for RX aggregationJohannes Berg2010-06-144-63/+61
| | | | | | | | | | | | | | | | | | | | | | | Currently we allocate some memory for each RX aggregation session and additionally keep a flag indicating whether or not it is valid. By using RCU to protect the pointer and making sure that the memory is fully set up before it becomes visible to the RX path, we can remove the need for the bool that indicates validity, as well as for locking on the RX path since it is always synchronised against itself, and we can guarantee that all other modifications are done when the structure is not visible to the RX path. The net result is that since we remove locking requirements from the RX path, we can in the future use any kind of lock for the setup and teardown code paths. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: move aggregation callback processingJohannes Berg2010-06-145-28/+30
| | | | | | | | | | | | | | | | | This moves the aggregation callback processing to the per-sdata skb queue and a work function rather than the tasklet. Unfortunately, this means that it extends the pkt_type hack to that skb queue. However, it will enable making ampdu_action API changes gradually, my current plan is to get rid of this again by forcing drivers to only return from ampdu_action() when everything is done, thus removing the callbacks completely. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: move blockack stop due to fragmentationJohannes Berg2010-06-142-4/+33
| | | | | | | | | | | | | | | | | There's a corner case where we receive a fragmented frame during a blockack session, in which case we will terminate that session. To simplify future work in this area that will culminate in allowing the driver callbacks for aggregation to sleep, move the processing of this case out of the RX path into the interface work. This will simplify future work because the new place for this code doesn't require that the function will always be atomic, which the RX path needs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: always process blockack action from workqueueJohannes Berg2010-06-143-55/+43
| | | | | | | | | | | To prepare for making the ampdu_action callback sleep, make mac80211 always process blockack action frames from the skb queue. This gets rid of the current special case for managed mode interfaces as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: pull mgmt frame rx into rx handlerJohannes Berg2010-06-146-97/+48
| | | | | | | | | | | | Some code is duplicated between ibss, mesh and managed mode regarding the queueing of management frames. Since all modes now use a common skb queue and a common work function, we can pull the queueing code into the rx handler directly and remove the duplicated length checks etc. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: common work skb freeingJohannes Berg2010-06-144-9/+3
| | | | | | | | | All the management processing functions free the skb after they are done, so this can be done in the new common code instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: use common work functionJohannes Berg2010-06-145-73/+84
| | | | | | | | | | | | | Even with the previous patch, IBSS, managed and mesh modes all attach their own work function to the shared work struct, which means some duplicated code. Change that to only have a frame processing function and a further work function for each of them and share some common code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: use common work structJohannes Berg2010-06-148-38/+29
| | | | | | | | | | | | | IBSS, managed and mesh modes all have their own work struct, and in the future we want to also use it in other modes to process frames from the now common skb queue. This also makes the skb queue and work safe to use from other interface types. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: use common skb queueJohannes Berg2010-06-145-34/+20
| | | | | | | | | | IBSS, managed and mesh modes all have an skb queue, and in the future we want to also use it in other modes, so make them all use a common skb queue already. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: simplify station/aggregation codeJohannes Berg2010-06-146-56/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A number of places use RCU locking for accessing the station list, even though they do not need to. Use mutex locking instead to prepare for the locking changes I want to make. The mlme code is also using a WLAN_STA_DISASSOC flag that has the same meaning as WLAN_STA_BLOCK_BA, so use that. While doing so, combine places where we loop over stations twice, and optimise away some of the loops by checking if the hardware supports aggregation at all first. Also fix a more theoretical race condition: right now we could resume, set up an aggregation session, and right after tear it down again due to the code that is needed for hardware reconfiguration here. Also mark add a comment to that code marking it as a workaround. Finally, remove a pointless aggregation disabling loop when an interface is stopped, directly after that we remove all stations from it which will also disable all aggregation sessions that may still be active, and does so in a race-free way unlike the current loop that doesn't block new sessions. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211/mac80211: allow action frame TX/RX in IBSSJohannes Berg2010-06-146-52/+57
| | | | | | | | | | | When in IBSS mode, currently action frame TX and RX cannot be used. Allow using it to talk to any peer, or for public action frames. Also, while at it, restructure the code in mac80211 to make it easier to add this for other interface types in the future. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Add netif state checking to ieee80211_ifa_changedJuuso Oikarinen2010-06-081-0/+3
| | | | | | | | | | | | | | | | | | There's a window for ieee80211_ifa_changed() to get called whilst the managed mode mutex has not been initialized when opening and stopping the interface. Currently this causes a kernel BUG like the following: [ 132.460013] kernel BUG at /home/wifi/iwlwifi-2.6/net/mac80211/main.c:380! [ 132.460013] invalid opcode: 0000 [#1] SMP The mutex is initialized during open(), hence once netif_running() is true, the mutex should be valid. Fix by adding a netif_running() check to the function. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Tested-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵John W. Linville2010-06-074-12/+64
|\ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-core.h
| * mac80211: fix function pointer checkHolger Schurig2010-06-071-1/+1
| | | | | | | | | | | | | | | | This makes "iw wlan0 dump survey" work again with mac80211-based drivers that support it, e.g. ath5k. Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: process station blockack action frames from workJohannes Berg2010-06-042-7/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Processing an association response could take a bit of time while we set up the hardware etc. During that time, the AP might already send a blockack request. If this happens very quickly on a fairly slow machine, we can end up processing the blockack request before the association processing has finished. Since the blockack processing cannot sleep right now, we also cannot make it wait in the driver. As a result, sometimes on slow machines the iwlagn driver gets totally confused, and no traffic can pass when the aggregation setup was done before the assoc setup completed. I'm working on a proper fix for this, which involves queuing all blockack category action frames from a work struct, and also allowing the ampdu_action driver callback to sleep, which will generally clean up the code and make things easier. However, this is a very involved and complex change. To fix the problem at hand in a way that can also be backported to stable, I've come up with this patch. Here, I simply process all aggregation action frames from the managed interface skb queue, which means their processing will be serialized with processing the association response, thereby fixing the problem. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: fix dialog token allocatorJohannes Berg2010-06-011-2/+4
| | | | | | | | | | | | | | | | | | The dialog token allocator has apparently been broken since b83f4e15 ("mac80211: fix deadlock in sta->lock") because it got moved out under the spinlock. Fix it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: fix blockack-req processingJohannes Berg2010-06-011-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Daniel reported that the paged RX changes had broken blockack request frame processing due to using data that wasn't really part of the skb data. Fix this using skb_copy_bits() for the needed data. As a side effect, this adds a check on processing too short frames, which previously this code could do. Reported-by: Daniel Halperin <dhalperi@cs.washington.edu> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Daniel Halperin <dhalperi@cs.washington.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: fix lock leak w/ ARP filtering and w/o CONFIG_INETJohn W. Linville2010-06-071-2/+1
| | | | | | | | | | | | | | | | "mac80211: make ARP filtering depend on CONFIG_INET" introduced this potential locking leak. Reported-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: Remove deprecated sta_notify commandsSujith2010-06-041-6/+0
| | | | | | | | | | | | | | | | | | | | STA_NOTIFY_ADD and STA_NOTIFY_REMOVE have no users anymore, and station addition/removal are indicated to drivers using sta_add() and sta_remove(), which can sleep. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: make ARP filtering depend on CONFIG_INETJohn W. Linville2010-06-042-0/+8
| | | | | | | | Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: reduce debugfs code sizeFelix Fietkau2010-06-032-122/+77
| | | | | | | | | | | | | | | | This patch reduces the binary size by around 25k (measured on MIPS, with CONFIG_MAC80211_DEBUG_COUNTERS enabled). Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: simplify key lockingJohannes Berg2010-06-037-267/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | Since I recently made station management able to sleep, I can now rework key management as well; since it will no longer need a spinlock and can also use a mutex instead, a bunch of code to allow drivers' set_key to sleep while key management is protected by a spinlock can now be removed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: move plink stateJohannes Berg2010-06-031-22/+22
| | | | | | | | | | | | | | | | | | | | For some odd reason, the plink_state enum is declared in the middle between aggregation related structures. Move it down to make the file easier to read. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: drop control frames after processingJohannes Berg2010-06-031-1/+6
| | | | | | | | | | | | | | | | | | | | After ieee80211_rx_h_ctrl() processing we only want to process management (including action) frames, so there's no point in letting control frames continue. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: remove useless work startingJohannes Berg2010-06-031-9/+0
| | | | | | | | | | | | | | | | | | | | Ever since we use only cfg80211 for configuration, there is no configuration that could be pending at this point, cfg80211 will have the configuration that is pending and apply it afterwards. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: move WEP weak IV checkJohannes Berg2010-06-031-15/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | I suspect the compiler will do this optimisation anyway, but it seems cleaner to move this into the WEP switch case. Also make rx_h_decrypt use a local variable for the frame_control so that we don't need to reload the hdr variable for this after linearizing. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: clean up ieee80211_stop_tx_ba_sessionJohannes Berg2010-06-033-12/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There's no sense in letting anything but internal mac80211 functions set the initiator to anything but WLAN_BACK_INITIATOR, since WLAN_BACK_RECIPIENT is only valid when we have received a frame from the peer, which we react to directly in mac80211. The debugfs code I recently added got this wrong as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: Add support for hardware ARP query filteringJuuso Oikarinen2010-06-035-2/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some hardware allow extended filtering of ARP frames not intended for the host. To perform such filtering, the hardware needs to know the current IP address(es) of the host, bound to its interface. Add support for ARP filtering to mac80211 by adding a new op to the driver interface, allowing to configure the current IP addresses. This op is called upon association with the currently configured address(es), and when associated whenever the IP address(es) change. This patch adds configuration of IPv4 addresses only, as IPv6 addresses don't need ARP filtering. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: remove bogus mod_timer() callJohannes Berg2010-06-031-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The IBSS code has a bogus mod_timer(..., 0) call, we shouldn't ever pass a constant value to the function since any constant value could be in the future or the past. However, invoking the timer here is not necessary at all, since we just finished scanning and just need to have the IBSS code run again from the workqueue later, so factor out the work starting and use that instead. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | cfg80211: make action channel type optionalJohannes Berg2010-06-026-5/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When sending action frames, we want to verify that we do that on the correct channel. However, checking the channel type in addition can get in the way, since the channel type could change on the fly during an association, and it's not useful to have the channel type anyway since it has no effect on the transmission. Therefore, make it optional to specify so that if wanted, it can still be checked, but is not required. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | wireless: fix several minor description typosWalter Goldens2010-06-023-3/+3
| | | | | | | | | | Signed-off-by: Walter Goldens <goldenstranger@yahoo.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | cfg80211: don't refuse HT20 channels on devices that don't support HT40Helmut Schaa2010-06-021-2/+3
| | | | | | | | | | | | | | Don't refuse HT20 channels on devices that don't support HT40. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: add the minstrel_ht rate control algorithmFelix Fietkau2010-06-027-0/+1103
|/ | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: make a function staticJohannes Berg2010-05-281-1/+1
| | | | | | | | sparse correctly complains that __ieee80211_get_channel_mode is not static. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wireless: fix sta_info.h kernel-doc warningsRandy Dunlap2010-05-241-1/+1
| | | | | | | | | | | Fix sta_info.h kernel-doc warnings: Warning(net/mac80211/sta_info.h:164): No description found for parameter 'tid_active_rx[STA_TID_NUM]' Warning(net/mac80211/sta_info.h:164): Excess struct/union/enum/typedef member 'tid_state_rx' description in 'sta_ampdu_mlme' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Revert "ath9k: Group Key fix for VAPs"John W. Linville2010-05-241-1/+0
| | | | | | | | | This reverts commit 03ceedea972a82d343fa5c2528b3952fa9e615d5. This patch was reported to cause a regression in which connectivity is lost and cannot be reestablished after a suspend/resume cycle. Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: add missing bracesJohannes Berg2010-05-211-2/+4
| | | | | | | | | | Specifying a valid channel type will get goto out rather than continuing, due to missing braces. This affects both remain on channel and action frame TX commands. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: fix crash in cfg80211_set_freq()Felix Fietkau2010-05-211-1/+1
| | | | | | | Since wdev can be NULL, check it before dereferencing it Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: Fix signal_type comparisonSujith2010-05-211-2/+2
| | | | | | | | | | | | | | signal_type is enum cfg80211_signal_type. This fixes the gcc warning: scan.c: In function `cfg80211_inform_bss': scan.c:518:6: warning: comparison between `enum cfg80211_signal_type' and `enum nl80211_bss' scan.c: In function `cfg80211_inform_bss_frame': scan.c:574:6: warning: comparison between `enum cfg80211_signal_type' and `enum nl80211_bss' Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* net: fix problem in dequeuing from input_pkt_queueTom Herbert2010-05-211-13/+15
| | | | | | | | | | | | | | | | | | | | Fix some issues introduced in batch skb dequeuing for input_pkt_queue. The primary issue it that the queue head must be incremented only after a packet has been processed, that is only after __netif_receive_skb has been called. This is needed for the mechanism to prevent OOO packet in RFS. Also when flushing the input_pkt_queue and process_queue, the process queue should be done first to prevent OOO packets. Because the input_pkt_queue has been effectively split into two queues, the calculation of the tail ptr is no longer correct. The correct value would be head+input_pkt_queue->len+process_queue->len. To avoid this calculation we added an explict input_queue_tail in softnet_data. The tail value is simply incremented when queuing to input_pkt_queue. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2010-05-202-8/+14
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6
| * netfilter: nf_conntrack: fix a race in __nf_conntrack_confirm against ↵Joerg Marx2010-05-201-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | nf_ct_get_next_corpse() This race was triggered by a 'conntrack -F' command running in parallel to the insertion of a hash for a new connection. Losing this race led to a dead conntrack entry effectively blocking traffic for a particular connection until timeout or flushing the conntrack hashes again. Now the check for an already dying connection is done inside the lock. Signed-off-by: Joerg Marx <joerg.marx@secunet.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
| * netfilter: nf_ct_sip: handle non-linear skbsPatrick McHardy2010-05-141-8/+4
| | | | | | | | | | | | | | | | | | Handle non-linear skbs by linearizing them instead of silently failing. Long term the helper should be fixed to either work with non-linear skbs directly by using the string search API or work on a copy of the data. Based on patch by Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
* | gro: Fix bogus gso_size on the first fraglist entryHerbert Xu2010-05-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When GRO produces fraglist entries, and the resulting skb hits an interface that is incapable of TSO but capable of FRAGLIST, we end up producing a bogus packet with gso_size non-zero. This was reported in the field with older versions of KVM that did not set the TSO bits on tuntap. This patch fixes that. Reported-by: Igor Zhang <yugzhang@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds2010-05-20479-8140/+24624
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits) qlcnic: adding co maintainer ixgbe: add support for active DA cables ixgbe: dcb, do not tag tc_prio_control frames ixgbe: fix ixgbe_tx_is_paused logic ixgbe: always enable vlan strip/insert when DCB is enabled ixgbe: remove some redundant code in setting FCoE FIP filter ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp ixgbe: fix header len when unsplit packet overflows to data buffer ipv6: Never schedule DAD timer on dead address ipv6: Use POSTDAD state ipv6: Use state_lock to protect ifa state ipv6: Replace inet6_ifaddr->dead with state cxgb4: notify upper drivers if the device is already up when they load cxgb4: keep interrupts available when the ports are brought down cxgb4: fix initial addition of MAC address cnic: Return SPQ credit to bnx2x after ring setup and shutdown. cnic: Convert cnic_local_flags to atomic ops. can: Fix SJA1000 command register writes on SMP systems bridge: fix build for CONFIG_SYSFS disabled ARCNET: Limit com20020 PCI ID matches for SOHARD cards ... Fix up various conflicts with pcmcia tree drivers/net/ {pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and wireless/orinoco/spectrum_cs.c} and feature removal (Documentation/feature-removal-schedule.txt). Also fix a non-content conflict due to pm_qos_requirement getting renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
| * | ipv6: Never schedule DAD timer on dead addressHerbert Xu2010-05-181-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch ensures that all places that schedule the DAD timer look at the address state in a safe manner before scheduling the timer. This ensures that we don't end up with pending timers after deleting an address. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ipv6: Use POSTDAD stateHerbert Xu2010-05-181-5/+24
| | | | | | | | | | | | | | | | | | | | | | | | This patch makes use of the new POSTDAD state. This prevents a race between DAD completion and failure. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ipv6: Use state_lock to protect ifa stateHerbert Xu2010-05-181-4/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes use of the new state_lock to synchronise between updates to the ifa state. This fixes the issue where a remotely triggered address deletion (through DAD failure) coincides with a local administrative address deletion, causing certain actions to be performed twice incorrectly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ipv6: Replace inet6_ifaddr->dead with stateHerbert Xu2010-05-181-7/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch replaces the boolean dead flag on inet6_ifaddr with a state enum. This allows us to roll back changes when deleting an address according to whether DAD has completed or not. This patch only adds the state field and does not change the logic. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud