summaryrefslogtreecommitdiffstats
path: root/net/sctp/associola.c
Commit message (Collapse)AuthorAgeFilesLines
* sctp: prevent too-fast association id reuseVlad Yasevich2009-11-231-1/+12
| | | | | | | | | | | | We use the idr subsystem and always ask for an id at or above 1. This results in a id reuse when one association is terminated while another is created. To prevent re-use, we keep track of the last id returned and ask for that id + 1 as a base for each query. We let the idr spin lock protect this base id as well. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: fix integer overflow when setting the autoclose timerAndrei Pelinescu-Onciul2009-11-231-1/+1
| | | | | | | | | | | When setting the autoclose timeout in jiffies there is a possible integer overflow if the value in seconds is very large (e.g. for 2^22 s with HZ=1024). The problem appears even on 64-bit due to the integer promotion rules. The fix is just a cast to unsigned long. Signed-off-by: Andrei Pelinescu-Onciul <andrei@iptel.org> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: Update max.burst implementationVlad Yasevich2009-11-231-0/+1
| | | | | | | | | | | | | Current implementation of max.burst ends up limiting new data during cwnd decay period. The decay is happening becuase the connection is idle and we are allowed to fill the congestion window. The point of max.burst is to limit micro-bursts in response to large acks. This still happens, as max.burst is still applied to each transmit opportunity. It will also apply if a very large send is made (greater then allowed by burst). Tested-by: Florian Niederbacher <florian.niederbacher@student.uibk.ac.at> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: Update SWS avaoidance receiver side algorithmVlad Yasevich2009-11-231-2/+3
| | | | | | | | | | We currently send window update SACKs every time we free up 1 PMTU worth of data. That a lot more SACKs then necessary. Instead, we'll now send back the actuall window every time we send a sack, and do window-update SACKs when a fraction of the receive buffer has been opened. The fraction is controlled with a sysctl. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: Select a working primary during sctp_connectx()Vlad Yasevich2009-11-231-0/+6
| | | | | | | | | | When sctp_connectx() is used, we pick the first address as primary, even though it may not have worked. This results in excessive retransmits and poor performance. We should select the address that the association was established with. Reported-by: Thomas Dreibholz <dreibh@iem.uni-due.de> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: Set source addresses on the association before adding transportsVlad Yasevich2009-11-131-3/+1
| | | | | | | | | | | | | | | | | | | Recent commit 8da645e101a8c20c6073efda3c7cc74eec01b87f sctp: Get rid of an extra routing lookup when adding a transport introduced a regression in the connection setup. The behavior was different between IPv4 and IPv6. IPv4 case ended up working because the route lookup routing returned a NULL route, which triggered another route lookup later in the output patch that succeeded. In the IPv6 case, a valid route was returned for first call, but we could not find a valid source address at the time since the source addresses were not set on the association yet. Thus resulted in a hung connection. The solution is to set the source addresses on the association prior to adding peers. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Get rid of an extra routing lookup when adding a transport.Vlad Yasevich2009-09-041-6/+8
| | | | | | | | | | | | | | We used to perform 2 routing lookups for a new transport: one just for path mtu detection, and one to actually route to destination and path mtu update when sending a packet. There is no point in doing both of them, especially since the first one just for path mtu doesn't take into account source address and sometimes gives the wrong route, causing path mtu updates anyway. We now do just the one call to do both route to destination and get path mtu updates. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: Failover transmitted list on transport deleteVlad Yasevich2009-09-041-0/+27
| | | | | | | | | Add-IP feature allows users to delete an active transport. If that transport has chunks in flight, those chunks need to be moved to another transport or association may get into unrecoverable state. Reported-by: Rafael Laufer <rlaufer@cisco.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: Fix SCTP_MAXSEG socket option to comply to spec.Vlad Yasevich2009-09-041-3/+3
| | | | | | | | | | | | | | | | We had a bug that we never stored the user-defined value for MAXSEG when setting the value on an association. Thus future PMTU events ended up re-writing the frag point and increasing it past user limit. Additionally, when setting the option on the socket/endpoint, we effect all current associations, which is against spec. Now, we store the user 'maxseg' value along with the computed 'frag_point'. We inherit 'maxseg' from the socket at association creation and use it as an upper limit for 'frag_point' when its set. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: drop a_rwnd to 0 when receive buffer overflows.Vlad Yasevich2009-09-041-2/+35
| | | | | | | | | | | | | | SCTP has a problem that when small chunks are used, it is possible to exhaust the receiver buffer without fully closing receive window. This happens due to all overhead that we have account for with small messages. To fix this, when receive buffer is exceeded, we'll drop the window to 0 and save the 'drop' portion. When application starts reading data and freeing up recevie buffer space, we'll wait until we've reached the 'drop' window and then add back this 'drop' one mtu at a time. This worked well in testing and under stress produced rather even recovery. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: release cached route when the transport goes down.Vlad Yasevich2009-09-041-2/+7
| | | | | | | | | When the sctp transport is marked down, we can release the cached route and force a new lookup when attempting to use this transport for anything. This way, if a better route or source address is available, we'll try to use it. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: support non-blocking version of the new sctp_connectx() APIVlad Yasevich2009-06-031-0/+4
| | | | | | | | | | | | Prior implementation of the new sctp_connectx() call that returns an association ID did not work correctly on non-blocking socket. This is because we could not return both a EINPROGRESS error and an association id. This is a new implementation that supports this. Originally from Ivan Skytte Jørgensen <isj-sctp@i1.dk Signed-off-by: Ivan Skytte Jørgensen <isj-sctp@i1.dk Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: fix to choose alternate destination when retransmit ASCONF chunkWei Yongjun2009-06-031-35/+7
| | | | | | | | | | | | | | | | | | RFC 5061 Section 5.1 ASCONF Chunk Procedures said: B4) Re-transmit the ASCONF Chunk last sent and if possible choose an alternate destination address (please refer to [RFC4960], Section 6.4.1). An endpoint MUST NOT add new parameters to this chunk; it MUST be the same (including its Sequence Number) as the last ASCONF sent. An endpoint MAY, however, bundle an additional ASCONF with new ASCONF parameters with the next Sequence Number. For details, see Section 5.5. This patch fix to choose an alternate destination address when re-transmit the ASCONF chunk, with some dup codes cleanup. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: fix panic when T4-rto timer expire on removed transportWei Yongjun2009-06-031-0/+7
| | | | | | | | | | | | | | | | | | | | | | | If T4-rto timer is expired on a removed transport, kernel panic will occur when we do failure management on that transport. You can reproduce this use the following sequence: Endpoint A Endpoint B (ESTABLISHED) (ESTABLISHED) <----------------- ASCONF (SRC=X) ASCONF -----------------> (Delete IP Address = X) <----------------- ASCONF-ACK (Success Indication) <----------------- ASCONF (T4-rto timer expire) This patch fixed the problem. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: fix panic when T2-shutdown timer expire on removed transportWei Yongjun2009-06-031-0/+8
| | | | | | | | | | | | | | | | | | | | | | If T2-shutdown timer is expired on a removed transport, kernel panic will occur when we do failure management on that transport. You can reproduce this use the following sequence: Endpoint A Endpoint B (ESTABLISHED) (ESTABLISHED) <----------------- SHUTDOWN (SRC=X) ASCONF -----------------> (Delete IP Address = X) <----------------- ASCONF-ACK (Success Indication) <----------------- SHUTDOWN (T2-shutdown timer expire) This patch fixed the problem. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: fix to only enable IPv6 address support on PF_INET6 socketWei Yongjun2009-06-031-1/+2
| | | | | | | | | If socket is create by PF_INET type, it can not used IPv6 address to send/recv DATA. So only enable IPv6 address support on PF_INET6 socket. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: Rework the tsn map to use generic bitmap.Vlad Yasevich2008-10-081-4/+5
| | | | | | | | | | | | | | | | | | | The tsn map currently use is 4K large and is stuck inside the sctp_association structure making memory references REALLY expensive. What we really need is at most 4K worth of bits so the biggest map we would have is 512 bytes. Also, the map is only really usefull when we have gaps to store and report. As such, starting with minimal map of say 32 TSNs (bits) should be enough for normal low-loss operations. We can grow the map by some multiple of 32 along with some extra room any time we receive the TSN which would put us outside of the map boundry. As we close gaps, we can shift the map to rebase it on the latest TSN we've seen. This saves 4088 bytes per association just in the map alone along savings from the now unnecessary structure members. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Fix oops when INIT-ACK indicates that peer doesn't support AUTHVlad Yasevich2008-09-181-4/+5
| | | | | | | | | | | | | | | | | | | | If INIT-ACK is received with SupportedExtensions parameter which indicates that the peer does not support AUTH, the packet will be silently ignore, and sctp_process_init() do cleanup all of the transports in the association. When T1-Init timer is expires, OOPS happen while we try to choose a different init transport. The solution is to only clean up the non-active transports, i.e the ones that the peer added. However, that introduces a problem with sctp_connectx(), because we don't mark the proper state for the transports provided by the user. So, we'll simply mark user-provided transports as ACTIVE. That will allow INIT retransmissions to work properly in the sctp_connectx() context and prevent the crash. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: convert BUG_TRAP to generic WARN_ONIlpo Järvinen2008-07-251-1/+1
| | | | | | | | | | | | | | Removes legacy reinvent-the-wheel type thing. The generic machinery integrates much better to automated debugging aids such as kerneloops.org (and others), and is unambiguous due to better naming. Non-intuively BUG_TRAP() is actually equal to WARN_ON() rather than BUG_ON() though some might actually be promoted to BUG_ON() but I left that to future. I could make at least one BUILD_BUG_ON conversion. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Prevent uninitialized memory accessFlorian Westphal2008-07-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | valgrind reports uninizialized memory accesses when running sctp inside the network simulation cradle simulator: Conditional jump or move depends on uninitialised value(s) at 0x570E34A: sctp_assoc_sync_pmtu (associola.c:1324) by 0x57427DA: sctp_packet_transmit (output.c:403) by 0x5710EFF: sctp_outq_flush (outqueue.c:824) by 0x5710B88: sctp_outq_uncork (outqueue.c:701) by 0x5745262: sctp_cmd_interpreter (sm_sideeffect.c:1548) by 0x57444B7: sctp_side_effects (sm_sideeffect.c:976) by 0x5744460: sctp_do_sm (sm_sideeffect.c:945) by 0x572157D: sctp_primitive_ASSOCIATE (primitive.c:94) by 0x5725C04: __sctp_connect (socket.c:1094) by 0x57297DC: sctp_connect (socket.c:3297) Conditional jump or move depends on uninitialised value(s) at 0x575D3A5: mod_timer (timer.c:630) by 0x5752B78: sctp_cmd_hb_timers_start (sm_sideeffect.c:555) by 0x5754133: sctp_cmd_interpreter (sm_sideeffect.c:1448) by 0x5753607: sctp_side_effects (sm_sideeffect.c:976) by 0x57535B0: sctp_do_sm (sm_sideeffect.c:945) by 0x571E9AE: sctp_endpoint_bh_rcv (endpointola.c:474) by 0x573347F: sctp_inq_push (inqueue.c:104) by 0x572EF93: sctp_rcv (input.c:256) by 0x5689623: ip_local_deliver_finish (ip_input.c:230) by 0x5689759: ip_local_deliver (ip_input.c:268) by 0x5689CAC: ip_rcv_finish (dst.h:246) #1 is due to "if (t->pmtu_pending)". 8a4794914f9cf2681235ec2311e189fe307c28c7 "[SCTP] Flag a pmtu change request" suggests it should be initialized to 0. #2 is the heartbeat timer 'expires' value, which is uninizialised, but test by mod_timer(). T3_rtx_timer seems to be affected by the same problem, so initialize it, too. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Kill unused variable in sctp_assoc_bh_rcv()Vlad Yasevich2008-06-201-1/+0
| | | | | Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Follow security requirement of responding with 1 packetVlad Yasevich2008-06-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | RFC 4960, Section 11.4. Protection of Non-SCTP-Capable Hosts When an SCTP stack receives a packet containing multiple control or DATA chunks and the processing of the packet requires the sending of multiple chunks in response, the sender of the response chunk(s) MUST NOT send more than one packet. If bundling is supported, multiple response chunks that fit into a single packet MAY be bundled together into one single response packet. If bundling is not supported, then the sender MUST NOT send more than one response chunk and MUST discard all other responses. Note that this rule does NOT apply to a SACK chunk, since a SACK chunk is, in itself, a response to DATA and a SACK does not require a response of more DATA. We implement this by not servicing our outqueue until we reach the end of the packet. This enables maximum bundling. We also identify 'response' chunks and make sure that we only send 1 packet when sending such chunks. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2008-06-161-2/+11
|\ | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/rt2x00/Kconfig drivers/net/wireless/rt2x00/rt2x00usb.c net/sctp/protocol.c
| * sctp: Correclty set changeover_active for SFR-CACCVlad Yasevich2008-06-161-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | Right now, any time we set a primary transport we set the changeover_active flag. As a result, we invoke SFR-CACC even when there has been no changeover events. Only set changeover_active, when there is a true changeover event, i.e. we had a primary path and we are changing to another transport. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of ↵David S. Miller2008-06-101-9/+12
|\ \ | |/ | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/tg3.c drivers/net/wireless/rt2x00/rt2x00dev.c net/mac80211/ieee80211_i.h
| * sctp: retran_path update bug fixGui Jianfeng2008-06-041-9/+12
| | | | | | | | | | | | | | | | | | If the current retran_path is the only active one, it should update it to the the next inactive one. Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sctp: Bring SCTP_DELAYED_ACK socket option into API complianceWei Yongjun2008-05-091-0/+3
|/ | | | | | | | | Brings delayed_ack socket option set/get into line with the latest ietf socket extensions API draft, while maintaining backwards compatibility. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: "list_for_each()" -> "list_for_each_entry()" where appropriate.Robert P. J. Day2008-04-121-20/+14
| | | | | | | | | | Replacing (almost) all invocations of list_for_each() with list_for_each_entry() tightens up the code and allows for the deletion of numerous list iterator variables that are no longer necessary. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: replace remaining __FUNCTION__ occurrencesHarvey Harrison2008-03-051-4/+4
| | | | | | | __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Fix kernel panic while received ASCONF chunk with bad serial numberWei Yongjun2008-02-061-3/+3
| | | | | | | | | | | | | | | | While recevied ASCONF chunk with serial number less then needed, kernel will treat this chunk as a retransmitted ASCONF chunk and find cached ASCONF-ACK chunk used sctp_assoc_lookup_asconf_ack(). But this function will always return NO-NULL. So response with cached ASCONF-ACKs chunk will cause kernel panic. In function sctp_assoc_lookup_asconf_ack(), if the cached ASCONF-ACKs list asconf_ack_list is empty, or if the serial being requested does not exists, the function as it currectly stands returns the actuall list_head asoc->asconf_ack_list, this is not a cache ASCONF-ACK chunk but a bogus pointer. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* [SCTP]: Stop claiming that this is a "reference implementation"Vlad Yasevich2008-02-051-4/+4
| | | | | | | | | | | I was notified by Randy Stewart that lksctp claims to be "the reference implementation". First of all, "the refrence implementation" was the original implementation of SCTP in usersapce written ty Randy and a few others. Second, after looking at the definiton of 'reference implementation', we don't really meet the requirements. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* [SCTP]: Update ASCONF processing to conform to spec.Vlad Yasevich2008-01-281-2/+56
| | | | | | | | | | | The processing of the ASCONF chunks has changed a lot in the spec. New items are: 1. A list of ASCONF-ACK chunks is now cached 2. The source of the packet is used in response. 3. New handling for unexpect ASCONF chunks. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Handle the wildcard ADD-IP Address parameterVlad Yasevich2008-01-281-0/+17
| | | | | | | | | | | | The Address Parameter in the parameter list of the ASCONF chunk may be a wildcard address. In this case special processing is required. For the 'add' case, the source IP of the packet is added. In the 'del' case, all addresses except the source IP of packet are removed. In the "mark primary" case, the source address is marked as primary. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Convert init_timer into setup_timerPavel Emelyanov2008-01-281-5/+3
| | | | | | | | | | | | | Many-many code in the kernel initialized the timer->function and timer->data together with calling init_timer(timer). There is already a helper for this. Use it for networking code. The patch is HUGE, but makes the code 130 lines shorter (98 insertions(+), 228 deletions(-)). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* SCTP: Allow ADD_IP to work with AUTH for backward compatibility.Vlad Yasevich2007-11-071-2/+6
| | | | | | | | | | This patch adds a tunable that will allow ADD_IP to work without AUTH for backward compatibility. The default value is off since the default value for ADD_IP is off as well. People who need to use ADD-IP with older implementations take risks of connection hijacking and should consider upgrading or turning this tunable on. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* SCTP: Correctly disable ADD-IP when AUTH is not supported.Vlad Yasevich2007-11-071-1/+1
| | | | Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* [SCTP]: Implement the receive and verification of AUTH chunkVlad Yasevich2007-10-101-0/+10
| | | | | | | | | This patch implements the receive path needed to process authenticated chunks. Add ability to process the AUTH chunk and handle edge cases for authenticated COOKIE-ECHO as well. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Implete SCTP-AUTH parameter processingVlad Yasevich2007-10-101-1/+20
| | | | | | | | | | | | Implement processing for the CHUNKS, RANDOM, and HMAC parameters and deal with how this parameters are effected by association restarts. In particular, during unexpeted INIT processing, we need to reply with parameters from the original INIT chunk. Also, after restart, we need to update the old association with new peer parameters and change the association shared keys. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Implement SCTP-AUTH initializations.Vlad Yasevich2007-10-101-0/+34
| | | | | | | | The patch initializes AUTH related members of the generic SCTP structures and provides a way to enable/disable auth extension. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Convert bind_addr_list locking to RCUVlad Yasevich2007-09-161-12/+2
| | | | | | | | | | | | | | | | | | | | | Since the sctp_sockaddr_entry is now RCU enabled as part of the patch to synchronize sctp_localaddr_list, it makes sense to change all handling of these entries to RCU. This includes the sctp_bind_addrs structure and it's list of bound addresses. This list is currently protected by an external rw_lock and that looks like an overkill. There are only 2 writers to the list: bind()/bindx() calls, and BH processing of ASCONF-ACK chunks. These are already seriealized via the socket lock, so they will not step on each other. These are also relatively rare, so we should be good with RCU. The readers are varied and they are easily converted to RCU. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Sridhar Samdurala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* SCTP: Uncomfirmed transports can't become InactiveVlad Yasevich2007-08-301-1/+6
| | | | | | | | | Do not set Unconfirmed transports to Inactive state. This may result in an inactive association being destroyed since we start counting errors on "inactive" transports against the association. This was found at the SCTP interop event. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* [SCTP] Flag a pmtu change requestVlad Yasevich2007-06-131-0/+4
| | | | | | | | | | | | Currently, if the socket is owned by the user, we drop the ICMP message. As a result SCTP forgets that path MTU changed and never adjusting it's estimate. This causes all subsequent packets to be fragmented. With this patch, we'll flag the association that it needs to udpate it's estimate based on the already updated routing information. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Acked-by: Sridhar Samudrala <sri@us.ibm.com>
* [SCTP]: Set assoc_id correctly during INIT collision.Vlad Yasevich2007-05-041-0/+29
| | | | | | | | | | | | | | | | | | | | | | | During the INIT/COOKIE-ACK collision cases, it's possible to get into a situation where the association id is not yet set at the time of the user event generation. As a result, user events have an association id set to 0 which will confuse applications. This happens if we hit case B of duplicate cookie processing. In the particular example found and provided by Oscar Isaula <Oscar.Isaula@motorola.com>, flow looks like this: A B ---- INIT-------> (lost) <---------INIT------ ---- INIT-ACK---> <------ Cookie ECHO When the Cookie Echo is received, we end up trying to update the association that was created on A as a result of the (lost) INIT, but that association doesn't have the ID set yet. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: cleanup extra semicolonsStephen Hemminger2007-04-251-1/+1
| | | | | | | | | | | Spring cleaning time... There seems to be a lot of places in the network code that have extra bogus semicolons after conditionals. Most commonly is a bogus semicolon after: switch() { } Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Implement SCTP_MAX_BURST socket option.Vlad Yasevich2007-04-251-1/+1
| | | | | Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Implement SCTP_ADDR_CONFIRMED state for ADDR_CHNAGE eventVlad Yasevich2007-04-251-1/+9
| | | | | Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Reset some transport and association variables on restartVlad Yasevich2007-03-201-0/+9
| | | | | | | | | | | | | | | | | | If the association has been restarted, we need to reset the transport congestion variables as well as accumulated error counts and CACC variables. If we do not, the association will use the wrong values and may terminate prematurely. This was found with a scenario where the peer restarted the association when lksctp was in the last HB timeout for its association. The restart happened, but the error counts have not been reset and when the timeout occurred, a newly restarted association was terminated due to excessive retransmits. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Clean up stale data during association restartVlad Yasevich2007-03-201-0/+6
| | | | | | | | | | | | | During association restart we may have stale data sitting on the ULP queue waiting for ordering or reassembly. This data may cause severe problems if not cleaned up. In particular stale data pending ordering may cause problems with receive window exhaustion if our peer has decided to restart the association. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PATCH] remove many unneeded #includes of sched.hTim Schmielau2007-02-141-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [NET] SCTP: Fix whitespace errors.YOSHIFUJI Hideaki2007-02-101-5/+5
| | | | | Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud