summaryrefslogtreecommitdiffstats
path: root/net/mac80211
Commit message (Collapse)AuthorAgeFilesLines
* net/mac80211/rx.c: fix build errorIngo Molnar2008-10-121-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | older versions of gcc do not recognize that ieee80211_rx_h_mesh_fwding() is unused when CONFIG_MAC80211_MESH is disabled: net/built-in.o: In function `ieee80211_rx_h_mesh_fwding': rx.c:(.text+0xd89af): undefined reference to `mpp_path_lookup' rx.c:(.text+0xd89c6): undefined reference to `mpp_path_add' as this code construct: if (ieee80211_vif_is_mesh(&sdata->vif)) CALL_RXH(ieee80211_rx_h_mesh_fwding); still causes ieee80211_rx_h_mesh_fwding() to be linked in. Protect these places with an #ifdef. commit b0dee578 ("Fix modpost failure when rx handlers are not inlined.") solved part of this problem - this patch is still needed. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
* mac80211: avoid "Wireless Event too big" message for assoc responseJohn W. Linville2008-10-061-3/+5
| | | | | | | | | | | | | | | | | | | The association response IEs are sent to userland with an IWEVCUSTOM event, which unfortunately is limited to a little more than 100 bytes of IE information with the encoding used. Many APs send so much IE information that this message overflows. When the IWEVCUSTOM event is too large, the kernel doesn't send it to userland anyway -- better just not to send it. An attempt was made by Jouni Malinen to correct this issue by converting to use IWEVASSOCREQIE and IWEVASSOCRESPIE messages instead ("mac80211: Use IWEVASSOCREQIE instead of IWEVCUSTOM"). Unfortunately, that caused a problem due to 32-/64-bit interactions on some systems and was reverted after the 'userland ABI' rule was invoked. That leaves us with this option instead of a proper fix, at least until we move to a cfg80211-based solution. Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: add the 'minstrel' rate control algorithmFelix Fietkau2008-10-067-0/+868
| | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: add multi-rate retry supportFelix Fietkau2008-10-061-6/+7
| | | | | | | | | This patch adjusts the rate control API to allow multi-rate retry if supported by the driver. The ieee80211_hw struct specifies how many alternate rate selections the driver supports. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: free up 2 bytes in skb->cbFelix Fietkau2008-10-063-9/+14
| | | | | | | | Free up 2 bytes in skb->cb to be used for multi-rate retry later. Move iv_len and icv_len initialization into key alloc. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: remove redundant check in ieee80211_master_start_xmit ↵Rami Rosen2008-10-061-10/+8
| | | | | | | | | | | | | | | | | | (net/mac80211/tx.c) - This patch (against the linux-wireless-next git tree) removes a redundant check in ieee80211_master_start_xmit (net/mac80211/tx.c) and adjust indentation in this method accordingly. In this method, there is no need to call again the ieee80211_is_data() method; this is checked immediately before, in the "if" command (we will not enter this block unless ieee80211_is_data() is true, so that the "and" (&&) condition in that "if" command will be fullfilled ). Signed-off-by: Rami Rosen <ramirose@gmail.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: remove shadowed variables in ieee80211_master_start_xmitTomas Winkler2008-10-061-4/+1
| | | | | | | This patch removes doubly defined variables in ieee80211_master_start_xmit Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wireless: restore revert lost to merge damageLinus Torvalds2008-10-061-8/+39
| | | | | | | Restore revert "mac80211: Use IWEVASSOCREQIE instead of IWEVCUSTOM", originally reverted in commit bf7394ccc13fe291d9258f01113b4c61214ddeae. Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Fix modpost failure when rx handlers are not inlined.Davide Pesavento2008-09-301-1/+1
| | | | | | | | | | | | | | | | When CONFIG_MAC80211_MESH=n and CONFIG_MAC80211_NOINLINE=y, gcc doesn't optimize out a call to ieee80211_rx_h_mesh_fwding, even if the previous comparison is always false in this case. This leads to the following errors during modpost: ERROR: "mpp_path_lookup" [net/mac80211/mac80211.ko] undefined! ERROR: "mpp_path_add" [net/mac80211/mac80211.ko] undefined! Fix by removing the possibility of uninlining ieee80211_rx_h_mesh_fwding rx handler. Signed-off-by: Davide Pesavento <davidepesa@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: remove wme_tx_queue and wme_rx_queue from net/mac80211/sta_info.hRami Rosen2008-09-301-12/+0
| | | | | | | | | This patch removes wme_tx_queue and wme_rx_queue from struct sta_info and from the debugfs sub-structure of struct sta_info in net/mac80211/sta_info.h, as they are useless and not used. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fixups for "make master iface not wireless"Johannes Berg2008-09-302-9/+8
| | | | | | | | | In "mac80211: make master iface not wireless" I accidentally forgot to include these changes ... leading to the expected BUG_ON errors. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix led behavior in IBSSEmmanuel Grumbach2008-09-241-0/+2
| | | | | | | | | | | | This patch fixes the led behavior in IBSS. After we joined an IBSS cell we need to inform the led that we got associated. Although there is no 802.11 association in IBSS mode, the semantic of "There is a link" is relevant. This allows the led to blink in IBSS mode (at least this solves a bug for iwlwifi). Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: probe with correct SSIDJohannes Berg2008-09-241-2/+2
| | | | | | | | | While associated, we should probe with the SSID we're associated to, not the scan SSID. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: clean up rate control APIJohannes Berg2008-09-2411-210/+159
| | | | | | | | | | | | | | | | | | Long awaited, hard work. This patch totally cleans up the rate control API to remove the requirement to include internal headers outside of net/mac80211/. There's one internal use in the PID algorithm left for mesh networking, we'll have to figure out a way to clean that one up and decide how to do the peer link evaluation, possibly independent of the rate control algorithm or via new API. Additionally, ath9k is left using the cross-inclusion hack for now, we will add new API where necessary to make this work properly, but right now I'm not expert enough to do it. It's still off better than before. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix mesh action frame handlingJohannes Berg2008-09-241-1/+1
| | | | | | | | | | | | | When I split off the action frame handling I made the code drop all action frames we don't want to handle. This is wrong since some action frames are actually handled via rx_h_mgmt through being queued to the sta/mesh implementations. Thanks to Li YanBo for noticing the problem. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Li YanBo <dreamfly281@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: mesh portal functionality supportYanBo2008-09-244-11/+196
| | | | | | | | | | | Currently the mesh code doesn't support bridging mesh point interfaces with wired ethernet or AP to construct an MPP or MAP. This patch adds code to support the "6 address frame format packet" functionality to mesh point interfaces. Now the mesh network can be used as backhaul for end to end communication. Signed-off-by: Li YanBo <dreamfly281@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: allow interface settings changes only when downJohannes Berg2008-09-241-0/+3
| | | | | | | | | We currently allow monitor flags changes and mesh ID changes when the interface is up, which can lead to trouble. Change it to only allow when down. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: show interface typeJohannes Berg2008-09-241-0/+1
| | | | | | | | | | This patch makes cfg80211 show the interface in the nl80211 information about a specific interface. API users are required to keep the type updated (everything else is fairly complicated) but you will get a warning if you fail to keep it updated. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: make master iface not wirelessJohannes Berg2008-09-247-99/+39
| | | | | | | | | | | | | | | | There's no need to register the master netdev with cfg80211, in fact, this is quite dangerous and lead to having to add checks for the master interface all over the config handlers. This patch removes the "ieee80211_ptr" from the master iface in favour of having a small netdev_priv() associated with the master interface that stores the ieee80211_local pointer. Because of this, a lot of code in the configuration handlers can go away. To make this patch easier to verify I have also removed a number of wiphy_priv() calls in favour of getting the sdata first and then the local pointer from that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* net: Use hton[sl]() instead of __constant_hton[sl]() where applicableArnaldo Carvalho de Melo2008-09-201-1/+1
| | | | | Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mac80211 : Fix mode change hard_start_xmit functionAbhijeet Kolekar2008-09-151-0/+1
| | | | | | | | | | | | When monitor mode is changed to BSS or IBSS, data trasnfer can not happen because proper transmit function is not assigend for BSS ,IBSS mode. This patch fixes this problem by assigning the ieee80211_subif_start_xmit to device's hard_start_xmit function. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: remove debug frame dumpingJohannes Berg2008-09-152-55/+0
| | | | | | | | | | | You can just pull up a monitor interface to get much more detailed information, or, when debugging a driver, insert dump code into the driver (which usually you will have to do anyway to dump the driver-specific information). Hence this option is useless. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: remove beacon countersJohannes Berg2008-09-153-20/+0
| | | | | | | | | | | | The beacon counters mac80211 keeps are only used for debugfs, unfortunately, they are incorrect for many hardware designs, namely any design that has a beacon template. Hence, remove the counters so we don't create the impression they are usable. This also allows removing the beacon MESH #ifdef again. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix sta_info kernel-doc warningJohannes Berg2008-09-151-1/+1
| | | | | | | | | Sorry, forgot to run kernel-doc and just got the output from the nightly run by email, this fixes a warning which I introduced when doing the first RC API cleanups. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix virtual interfaces vs. injectionJohannes Berg2008-09-152-16/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, virtual interface pointers passed to drivers might be from monitor interfaces and as such completely uninitialised because we do not tell the driver about monitor interfaces when those are created. Instead of passing them, we should therefore indicate to the driver that there is no information; do that by passing a NULL value and adjust drivers to cope with it. As a result, some mac80211 API functions also need to cope with a NULL vif pointer so drivers can still call them unconditionally. Also, when injecting frames we really don't want to pass NULL all the time, if we know we are the source address of a frame and have a local interface for that address, we can to use that interface. This also helps with processing the frame correctly for that interface which will help the 802.11w implementation. It's not entirely correct for VLANs or WDS interfaces because there the MAC address isn't unique, but it's already a lot better than what we do now. Finally, when injecting without a matching local interface, don't assign sequence numbers at all. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: pass AP vif pointer for VLANsJohannes Berg2008-09-151-0/+4
| | | | | | | | We cannot pass a VLAN vif pointer to the driver since those are entirely virtual and we never tell the driver. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: share sta_info->ht_infoJohannes Berg2008-09-153-5/+3
| | | | | | | | | Rate control algorithms may need access to a station's HT capabilities, so share the ht_info struct in the public station API. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: move txrate_idx into RC algorithmsJohannes Berg2008-09-156-18/+27
| | | | | | | | | | The sta_info->txrate_idx member isn't used by all RC algorithms in the way it was intended to be used, move it into those that require it (only PID) and keep track in the core code of which rate was last used for reporting to userspace and the mesh MLME. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: share sta->supp_ratesJohannes Berg2008-09-155-12/+10
| | | | | | | | As more preparation for a saner rate control algorithm API, share the supported rates bitmap in the public API. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: move last_txrate_idx into RC algorithmsJohannes Berg2008-09-152-4/+0
| | | | | | | | This variable in sta_info is only used in a meaningful way by the Intel RC algorithms, so move it into those. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: small rate control changesJohannes Berg2008-09-153-43/+25
| | | | | | | | | | | | | | | | This patch fixes mac80211 to not rely on the rate control algorithm to update sta->tx_retry_failed and sta->tx_retry_count (even if we don't currently use them), removes a number of completely unused values we don't even show in debugfs and changes the code in ieee80211_tx_status() to not look up the sta_info repeatedly. The only behaviour change here would be not calling the rate control function rate_control_tx_status() when no sta_info is found, but all rate control algorithms ignore such calls anyway. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: share STA information with driverJohannes Berg2008-09-1516-90/+109
| | | | | | | | | | | This patch changes mac80211 to share some more data about stations with drivers. Should help iwlwifi and ath9k when they get around to updating, and might also help with implementing rate control algorithms without internals. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: warn on some invalid vlan operationsJohannes Berg2008-09-151-0/+6
| | | | | | | | | These should never happen, but better warn about them than crashing a driver, the fact that they never happen is rather subtle throughout mac80211. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: move regular interface handlingJohannes Berg2008-09-153-551/+550
| | | | | | | | Move the code to handle regular interfaces out of main.c and into iface.c, keep only the master interface stuff in main.c. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: use nl80211 interface typesJohannes Berg2008-09-1514-256/+249
| | | | | | | | | | There's really no reason for mac80211 to be using its own interface type defines. Use the nl80211 types and simplify the configuration code a bit: there's no need to translate them any more now. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: inform driver of basic ratesetJohannes Berg2008-09-155-39/+44
| | | | | | | | Drivers need to know the basic rateset to be able to configure the ACK/CTS programming in hardware correctly. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: clean up some commentsJohannes Berg2008-09-154-22/+5
| | | | | | | | | Some comments refer to 80211.o or similar; also remove a comment about implementing fragments better, we really have better things to do. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: clean up scan namespaceJohannes Berg2008-09-159-140/+145
| | | | | | | | | Most of the scan functions are called ieee80211_sta_scan_* or similar, make clean it up so they are all just called ieee80211_scan_*. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: make bridge_packets a virtual interface optionJohannes Berg2008-09-154-18/+22
| | | | | | | | | | | | The bridge_packets configuration really should be per virtual interface (theoretically per AP/VLAN, but this is much easier); there currently is no way to set it yet though. Also invert the option to "NO_BRIDGE_PACKETS" so the default is to bridge. While at it, also document the flags properly. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: move ieee80211_set_freq to utilsJohannes Berg2008-09-153-29/+29
| | | | | | | It really doesn't belong into the wireless extensions code. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: reorder MLME code moreJohannes Berg2008-09-153-334/+346
| | | | | | | | | | This way all the utility functions are at the top, then the state machine and externally callable functions are moved to the bottom. Also clean up ieee80211_i.h a bit and add a few comments about which functions are called from where. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix scan vs. interface removal raceJohannes Berg2008-09-153-20/+53
| | | | | | | | | | | | | | | | | | | | | | | | | When we remove an interface, we can currently end up having a pointer to it left in local->scan_sdata after it has been set down, and then with a hardware scan the scan completion can try to access it which is a bug. Alternatively, a scan that started as a hardware scan may terminate as though it was a software scan, if the timing is just right. On SMP systems, software scan also has a similar problem, just canceling the delayed work and setting a flag isn't enough since it may be running concurrently; in this case we would also never restore state of other interfaces. This patch hopefully fixes the problems by always invoking ieee80211_scan_completed or requiring it to be invoked by the driver, I suspect the drivers that have ->hw_scan() are buggy. The bug will not manifest itself unless you remove the interface while hw-scanning which will also turn off the hw, and then add a new interface which will be unusable until you scan once. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix work raceJohannes Berg2008-09-152-0/+17
| | | | | | | | | | | | | | When we stop an interface, the work on it may still be pending or running. We do cancel the timer, but we do not currently protect against the work struct. The race is very unlikely to hit -- it'll happen only when the driver is using mac80211's workqueue to run long-running tasks and the sta/mesh works are delayed for quite a bit. This patch fixes it by cancelling the work explicitly. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: split off mesh handling entirelyJohannes Berg2008-09-1515-295/+457
| | | | | | | | | | | | This patch splits off mesh handling from the STA/IBSS. Unfortunately it increases mesh code size a bit, but I think it makes things clearer. The patch also reduces per-interface run-time memory usage. Also clean up a few places where ifdef is not required. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: dont set REQ_RUN when scan finishesJohannes Berg2008-09-151-1/+2
| | | | | | | | | | | The timer restart is done wrongly, we shouldn't set the REQ_RUN bit when the scan has finished if it hadn't been set before the scan started. If the timer fires during the scan, it will set REQ_RUN and then we can run the work for it, if it didn't fire then we shouldn't run its work either. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: move STA timer restartJohannes Berg2008-09-152-14/+13
| | | | | | | | This I shouldn't have moved to the scan implementation, move it back to the MLME where it belongs, to the notification. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: move ieee80211_sta_expireJohannes Berg2008-09-153-28/+29
| | | | | | | | | ieee80211_sta_expire uses the internal __sta_info_unlink function which can become static if this function is moved to sta_info.c. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: Add new wireless regulatory infrastructureLuis R. Rodriguez2008-09-151-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Reorder debugfs calls during netdev deinitJouni Malinen2008-09-111-2/+2
| | | | | | | | | | | ieee80211_free_keys() must be called before ieee80211_debugfs_remove_netdev() in order to make sure that the possible default_key symlink is removed before attempting to remove the netdev debugfs directory. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: move frame TX functionJohannes Berg2008-09-118-30/+30
| | | | | | | | | The ieee80211_sta_tx function isn't MLME code any more, it's getting used by a lot of code. Move it to utils and rename it to ieee80211_tx_skb. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
OpenPOWER on IntegriCloud