summaryrefslogtreecommitdiffstats
path: root/net/mac80211/sta_info.c
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: use unaligned safe memcmp() in-place of compare_ether_addr()Shaddy Baddah2008-12-051-1/+1
| | | | | | | | | | | | | | | | | | | | | After fixing zd1211rw: use unaligned safe memcmp() in-place of compare_ether_addr(), I started to see kernel log messages detailing unaligned access: Kernel unaligned access at TPC[100f7f44] sta_info_get+0x24/0x68 [mac80211] As with the aforementioned patch, the unaligned access was eminating from a compare_ether_addr() call. Concerned that whilst it was safe to assume that unalignment was the norm for the zd1211rw, and take preventative measures, it may not be the case or acceptable to use the easy fix of changing the call to memcmp(). My research however indicated that it was OK to do this, as there are a few instances where memcmp() is the preferred mechanism for doing mac address comparisons throughout the module. Signed-off-by: Shaddy Baddah <shaddy_baddah@hotmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix debugfs lockupJohannes Berg2008-10-141-1/+6
| | | | | | | | | | | | | When debugfs_create_dir fails, sta_info_debugfs_add_work will not terminate because it will find the same station again and again. This is possible whenever debugfs fails for whatever reason; one reason is a race condition in mac80211, unfortunately we cannot do much about it, so just document it, it just means some station may be missing from debugfs. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Robin Holt <holt@sgi.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: clean up rate control APIJohannes Berg2008-09-241-12/+5
| | | | | | | | | | | | | | | | | | Long awaited, hard work. This patch totally cleans up the rate control API to remove the requirement to include internal headers outside of net/mac80211/. There's one internal use in the PID algorithm left for mesh networking, we'll have to figure out a way to clean that one up and decide how to do the peer link evaluation, possibly independent of the rate control algorithm or via new API. Additionally, ath9k is left using the cross-inclusion hack for now, we will add new API where necessary to make this work properly, but right now I'm not expert enough to do it. It's still off better than before. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: share STA information with driverJohannes Berg2008-09-151-23/+36
| | | | | | | | | | | This patch changes mac80211 to share some more data about stations with drivers. Should help iwlwifi and ath9k when they get around to updating, and might also help with implementing rate control algorithms without internals. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: use nl80211 interface typesJohannes Berg2008-09-151-2/+2
| | | | | | | | | | There's really no reason for mac80211 to be using its own interface type defines. Use the nl80211 types and simplify the configuration code a bit: there's no need to translate them any more now. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: move ieee80211_sta_expireJohannes Berg2008-09-151-1/+27
| | | | | | | | | ieee80211_sta_expire uses the internal __sta_info_unlink function which can become static if this function is moved to sta_info.c. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: make master netdev handling saneJohannes Berg2008-07-141-8/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, almost every interface type has a 'bss' pointer pointing to BSS information. This BSS information, however, is for a _local_ BSS, not for the BSS we joined, so having it on a STA mode interface makes little sense, but now they have it pointing to the master device, which is an AP mode virtual interface. However, except for some bitrate control data, this pointer is only used in AP/VLAN modes (for power saving stations.) Overall, it is not necessary to even have the master netdev be a valid virtual interface, and it doesn't have to be on the list of interfaces either. This patch changes the master netdev to be special, it now - no longer is on the list of virtual interfaces, which lets me remove a lot of tests for that - no longer has sub_if_data attached, since that isn't used Additionally, this patch changes some vlan/ap mode handling that is related to these 'bss' pointers described above (but in the VLAN case they actually make sense because there they point to the AP they belong to); it also adds some debugging code to IEEE80211_DEV_TO_SUB_IF to validate it is not called on the master netdev any more. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix lots of kernel-docRandy Dunlap2008-07-081-0/+1
| | | | | | | | | | | Fix more than 50 kernel-doc warnings in ieee80211/mac80211 kernel-doc notation. Fix a few typos also. Note: Some fields are marked as TBD and need to have their description corrected. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: rework debug settings and make debugging saferJohannes Berg2008-07-021-0/+2
| | | | | | | | | | | | | This patch reworks the mac80211 debug settings making them more focused and adding help text for those that didn't have one. It also removes a number of printks that can be triggered remotely and add no value, e.g. "too short deauthentication frame received - ignoring". If somebody really needs to debug that they should just add a monitor interface and look at the frames in wireshark. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: use separate spinlock for sta flagsJohannes Berg2008-06-261-0/+1
| | | | | | | | | | | | David Ellingsworth posted a bug that was only noticable on UP/NO-PREEMPT and Michael correctly analysed it to be a spin_lock_bh() section within a spin_lock_irqsave() section. This adds a separate spinlock for the sta_info flags to fix that issue and avoid having to take much care about where the sta flag manipulation functions are called. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reported-By: David Ellingsworth <david@identd.dyndns.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: use multi-queue master netdeviceJohannes Berg2008-05-211-1/+1
| | | | | | | | | | This patch updates mac80211 and drivers to be multi-queue aware and use that instead of the internal queue mapping. Also does a number of cleanups in various pieces of the code that fall out and reduces internal mac80211 state size. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: move TX info into skb->cbJohannes Berg2008-05-211-3/+3
| | | | | | | | | | | | | | | | This patch converts mac80211 and all drivers to have transmit information and status in skb->cb rather than allocating extra memory for it and copying all the data around. To make it fit, a union is used where only data that is necessary for all steps is kept outside of the union. A number of fixes were done by Ivo, as well as the rt2x00 part of this patch. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: proper STA info lockingJohannes Berg2008-05-141-9/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As discussed earlier, we can unify locking in struct sta_info and use just a single spinlock protecting all members of the structure that need protection. Many don't, but one of the especially bad ones is the 'flags' member that can currently be clobbered when RX and TX is being processed on different CPUs at the same time. Because having four spinlocks for different, mostly exclusive parts of a single structure is overkill, this patch also kills the ampdu and mesh plink spinlocks and uses just a single one for everything. Because none of the spinlocks are nested, this is safe. It remains to be seen whether or not we should make the sta flags use atomic bit operations instead, for now though this is a safe thing and using atomic operations instead will be very simple using the new static inline functions this patch introduces for accessing sta->flags. Since spin_lock_bh() is used with this lock, there shouldn't be any contention even if aggregation is enabled at around the same time as both requires frame transmission/reception which is in a bh context. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Tomas Winkler <tomasw@gmail.com> Cc: Ron Rindjunsky <ron.rindjunsky@intel.com> Cc: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: QoS related cleanupsJohannes Berg2008-05-071-1/+1
| | | | | | | | | | | | | | | | | | This * makes the queue number passed to drivers a u16 (as it will be with skb_get_queue_mapping) * removes the useless queue number defines * splits hw->queues into hw->queues/ampdu_queues * removes the debugfs files for per-queue counters * removes some dead QoS code * removes the beacon queue configuration for IBSS so that the drivers now never get a queue number bigger than (hw->queues + hw->ampdu_queues - 1) for tx and only in the range 0..hw->queues-1 for conf_tx. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: rename filesJohannes Berg2008-04-081-1/+1
| | | | | | | | This patch renames all mac80211 files (except ieee80211_i.h) to get rid of the useless ieee80211_ prefix. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix key vs. sta locking problemsJohannes Berg2008-04-081-26/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Up to now, key manipulation is supposed to run under RTNL to avoid concurrent manipulations and also allow the set_key() hardware callback to sleep. This is not feasible because STA structs are rcu-protected and thus a lot of operations there cannot take the RTNL. Also, key references are rcu-protected so we cannot do things atomically. This patch changes key locking completely: * key operations are now atomic * hardware crypto offload is enabled and disabled from a workqueue, due to that key freeing is also delayed * debugfs code is also run from a workqueue * keys reference STAs (and vice versa!) so during STA unlink the STAs key reference is removed but not the keys STA reference, to avoid races key todo work is run before STA destruction. * fewer STA operations now need the RTNL which was required due to key operations This fixes the locking problems lockdep pointed out and also makes things more light-weight because the rtnl isn't required as much. Note that the key todo lock/key mutex are global locks, this is not required, of course, they could be per-hardware instead. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix sta-info pinningJohannes Berg2008-04-081-32/+32
| | | | | | | | | | When a STA is supposed to be unlinked but is pinned, it still needs to be unlinked from all structures. Only at the end of the unlink process should we check for pin status and invalidate the callers reference if it is pinned. Move the pin status check down. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix defined but not usedJiri Slaby2008-04-081-30/+30
| | | | | | | | | | | | | These two symbols are used only in ifdeffed function. Move them to that section too. net/mac80211/sta_info.c:387: warning: `__sta_info_pin' defined but not used net/mac80211/sta_info.c:397: warning: `__sta_info_unpin' defined but not used Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Michael Wu <flamingice@sourmilk.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jiri Benc <jbenc@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix possible sta-debugfs work lockupJohannes Berg2008-04-081-6/+23
| | | | | | | | | | | | | | | | | | | | Because we queue the sta-debugfs-adding work on our mac80211 workqueue (which needs to be flushed under RTNL) and that work needs the RTNL, it can currently deadlock, thanks to Reinette Chatre for pointing out the lockdep warning about this. This patch fixes it by moving this work to the common kernel workqueue (using schedule_work) and canceling it as appropriate. It also fixes a related problem: When a STA is pinned by the debugfs adding work and sta_info_flush() runs concurrently it is not guaranteed that all STAs are removed from the driver before the corresponding interface is removed which may lead to bugs. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix spinlock recursion on sta expirationLuis Carlos Cobo2008-04-011-1/+1
| | | | | | Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: sta_info_flush() fixesJohannes Berg2008-04-011-0/+70
| | | | | | | | | When the IBSS code tries to flush the STA list, it does so in an atomic context. Flushing isn't safe there, however, and requires the RTNL, so we need to defer it to a workqueue. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: clean up sta_info_destroy() users wrt. RCU/lockingJohannes Berg2008-04-011-14/+19
| | | | | | | | | | | | Calling sta_info_destroy() doesn't require RCU-synchronisation before-hand because it does that internally. However, it does require rtnl-locking so insert that where necessary. Also clean up the code doing it internally to be a bit clearer and not synchronize twice if keys are configured. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: automatically free sta struct when insertion failsJohannes Berg2008-04-011-23/+57
| | | | | | | | | | | When STA structure insertion fails, it has been allocated but isn't really alive yet, it isn't reachable by any other code and also can't yet have much configured. This patch changes the code so that when the insertion fails, the resulting STA pointer is no longer valid because it is freed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix sta_info_destroy(NULL)Johannes Berg2008-04-011-3/+5
| | | | | | | | | | sta_info_destroy(NULL) should be valid, but currently isn't because the argument is dereferenced before the NULL check. There are no users that currently pass in NULL, i.e. all check before calling the function, but I want to change that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: A-MPDU MLME use dynamic allocationRon Rindjunsky2008-03-271-14/+16
| | | | | | | | | | | This patch alters the A-MPDU MLME in sta_info to use dynamic allocation, thus drastically improving memory usage - from a constant ~2 Kbyte in the previous (static) allocation to a lower limit of ~200 Byte and an upper limit of ~2 Kbyte. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix mesh_path and sta_info get_by_idx functionsLuis Carlos Cobo2008-03-061-2/+3
| | | | | | | | Skip properly entries whose dev does not match. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: add PLINK_ prefix and kernel doc to enum plink_stateLuis Carlos Cobo2008-03-061-1/+1
| | | | | | Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix sta_info mesh timer bugJohannes Berg2008-03-061-8/+25
| | | | | | | | | | | | | | I noticed a bug I introduced when mesh is enabled: sta_info_destroy() will end up calling cancel_timer() on a timer that has never been initialized because the timer is only initialized in mesh_plink_alloc(), not in sta_info_alloc(). This patch moves the initialization of all mesh related fields into sta_info_alloc(), adds a bit of sanity checking to the cfg80211 handlers and sta_info_insert() and makes mesh_plink_alloc() a static helper function that is only used from the mesh plink code. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: add documentation bookJohannes Berg2008-03-061-8/+8
| | | | | | | | | | | | | | Quite a while ago I started this book. The required kernel-doc patches have since gone into the tree so it is now possible to build the book in mainline. The actual documentation is still rather incomplete and not all things are linked into the book, but this enables us to edit the documentation collaboratively, hopefully driver authors can add documentation based on their experience with mac80211. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: remove STA entries when taking down interfaceJohannes Berg2008-03-061-2/+12
| | | | | | | | | | | | | | | | | | | | | When we take down an interface, we need to remove the STA info items that belong to it because otherwise we might invoke a sta_notify() callback in the driver when we later delete the STA entries, but in that case the driver will already have removed its knowledge of the interface they belonged to leading to confusion. Also, we could invoke the set_tim() callback after the driver removed its knowledge of the interface, which can lead to a crash if it requests a beacon with a then-invalid vif pointer! A side effect of this patch is that, because it was easier, it disallows changing the WDS peer while an interface is up. Should that actually be necessary, it can be added back, but the WDS peer STA entry may not be added while the interface is UP so for now I've simplified the WDS peer's STA entry lifetime management. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: split sta_info_addJohannes Berg2008-03-061-22/+50
| | | | | | | | | | | | | | | | | | sta_info_add() has two functions: allocating a station info structure and inserting it into the hash table/list. Splitting these two functions allows allocating with GFP_KERNEL in many places instead of GFP_ATOMIC which is now required by the RCU protection. Additionally, in many places RCU protection is now no longer needed at all because between sta_info_alloc() and sta_info_insert() the caller owns the structure. This fixes a few race conditions with setting initial flags and similar, but not all (see comments in ieee80211_sta.c and cfg.c). More documentation on the existing races will be in a follow-up patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: RCU-ify STA info structure accessJohannes Berg2008-03-061-147/+240
| | | | | | | | | | | | | | | This makes access to the STA hash table/list use RCU to protect against freeing of items. However, it's not a true RCU, the copy step is missing: whenever somebody changes a STA item it is simply updated. This is an existing race condition that is now somewhat understandable. This patch also fixes the race key freeing vs. STA destruction by making sure that sta_info_destroy() is always called under RTNL and frees the key. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: clean up mesh codeJohannes Berg2008-03-061-11/+2
| | | | | | | Various cleanups, reducing the #ifdef mess and other things. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: mesh data structures and first mesh changesLuis Carlos Cobo2008-03-061-3/+39
| | | | | | | | | Includes integration in struct sta_info of mesh peer link elements, previously on their own mesh peer link table. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: split ieee80211_key_alloc/freeJohannes Berg2008-02-291-1/+1
| | | | | | | | | | | | | | | | | | | | In order to RCU-ify sta_info, we need to be able to allocate a key without linking it to an sdata/sta structure (because allocation cannot be done in an rcu critical section). This patch splits up ieee80211_key_alloc() and updates all users appropriately. While at it, this patch fixes a number of race conditions such as finally making key replacement atomic, unfortunately at the expense of more complex code. Note that this patch documents /existing/ bugs with sta info and key interaction, there is currently a race condition when a sta info is freed without holding the RTNL. This will finally be fixed by a followup patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: atomically check whether STA exists alreadyJohannes Berg2008-02-291-11/+27
| | | | | | | | | | | | | | When a STA structure is added, it is often checked whether it already exists before adding it. This, however, isn't done atomically so there is a race condition that could lead to two STA structures being added with the same MAC address. This patch changes sta_info_add() to return an ERR_PTR in case of failure and adds the failure mode -EEXIST when the STA already exists. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: consolidate TIM handling codeJohannes Berg2008-02-291-26/+61
| | | | | | | | | | This consolidates all TIM handling code to avoid re-introducing errors with the bitmap/set_tim order and to reduce code. While reading the code I noticed a possible problem so I also added a comment about that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: remove sta TIM flag, fix expiry TIM handlingJohannes Berg2008-02-291-10/+18
| | | | | | | | | | | The TIM flag that is kept in each station's info is completely useless, there's no code (aside from the debugfs display code) checking it, hence it can be removed. While doing that, I noticed that the TIM handling is broken when buffered frames expire, so fix that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: invoke set_tim() callback after setting own TIM infoJohannes Berg2008-02-291-2/+2
| | | | | | | | | | | Drivers should be allowed to simply get a complete new beacon when set_tim() is invoked (and set_tim() is required for drivers that just want a beacon template!), so we need to update our own TIM bitmap before calling set_tim() so that getting the beacon will now get an already updated beacon. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211 API for channels/bitrates, mac80211 and driver conversionJohannes Berg2008-02-291-24/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: A-MPDU Tx MLME data initializationRon Rindjunsky2008-02-291-1/+12
| | | | | | | This patch initialize A-MPDU MLME data for Tx sessions. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: move interface type to vif structureJohannes Berg2008-01-281-2/+2
| | | | | | | | | | Drivers that support mixed AP/STA operation may well need to know the type of a virtual interface when iterating over them. The easiest way to support that is to move the interface type variable into the vif structure. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: dont use interface indices in driversJohannes Berg2008-01-281-6/+21
| | | | | | | | | | | | | | | | This patch gets rid of the if_id stuff where possible in favour of a new per-virtual-interface structure "struct ieee80211_vif". This structure is located at the end of the per-interface structure and contains a variable length driver-use data area. This has two advantages: * removes the need to look up interfaces by if_id, this is better for working with network namespaces and performance * allows drivers to store and retrieve per-interface data without having to allocate own lists/hash tables Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: A-MPDU Rx MLME data initializationRon Rindjunsky2008-01-281-0/+14
| | | | | | | | This patch initialize A-MPDU MLME data for Rx sessions. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mac80211: A-MPDU Rx adding basic functionalityRon Rindjunsky2008-01-281-0/+3
| | | | | | | | | | | | | | | | This patch adds the basic needed abilities and functions for A-MPDU Rx session changed functions: - ieee80211_sta_process_addba_request - Rx A-MPDU initialization enabled - ieee80211_stop - stops all A-MPDU Rx in case interface goes down added functions: - ieee80211_send_delba - used for sending out Del BA in A-MPDU sessions - ieee80211_sta_stop_rx_BA_session - stopping Rx A-MPDU session - sta_rx_agg_session_timer_expired - stops A-MPDU Rx use if load is too low Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Convert init_timer into setup_timerPavel Emelyanov2008-01-281-3/+2
| | | | | | | | | | | | | Many-many code in the kernel initialized the timer->function and timer->data together with calling init_timer(timer). There is already a helper for this. Use it for networking code. The patch is HUGE, but makes the code 130 lines shorter (98 insertions(+), 228 deletions(-)). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mac80211: round station cleanup timerJohannes Berg2007-12-261-2/+5
| | | | | | | | | The station cleanup timer runs every ten seconds, the exact timing is not relevant at all so it can well run together with other things to save power. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [MAC80211]: add sta_notify callbackTomas Winkler2007-10-101-6/+7
| | | | | | | | | | | | | | | | This patch adds sta_notify callback and removes sta_table_notification which was not used by any driver. sta_notify() is essential for drivers that keeps notion of station internally and need to be notified about removal or addition of a station to the (I)BSS or assocation to an AP. This version adds interface id to the parameter list as suggested by Johannes Berg Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [MAC80211]: print out wiphy name instead of master deviceJohannes Berg2007-10-101-2/+2
| | | | | | | | | | This makes mac80211 print out the wiphy name instead of the master device name where appropriate. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches2007-10-101-5/+8
| | | | | | | This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud