summaryrefslogtreecommitdiffstats
path: root/net/ipv6/sit.c
Commit message (Collapse)AuthorAgeFilesLines
* ip6tnl/sit: drop packet if ECN present with not-ECTNicolas Dichtel2012-11-281-12/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reports the change made by Stephen Hemminger in ipip and gre[6] in commit eccc1bb8d4b4 (tunnel: drop packet if ECN present with not-ECT). Goal is to handle RFC6040, Section 4.2: Default Tunnel Egress Behaviour. o If the inner ECN field is Not-ECT, the decapsulator MUST NOT propagate any other ECN codepoint onwards. This is because the inner Not-ECT marking is set by transports that rely on dropped packets as an indication of congestion and would not understand or respond to any other ECN codepoint [RFC4774]. Specifically: * If the inner ECN field is Not-ECT and the outer ECN field is CE, the decapsulator MUST drop the packet. * If the inner ECN field is Not-ECT and the outer ECN field is Not-ECT, ECT(0), or ECT(1), the decapsulator MUST forward the outgoing packet with the ECN field cleared to Not-ECT. The patch takes benefits from common function added in net/inet_ecn.h. Like it was done for Xin4 tunnels, it adds logging to allow detecting broken systems that set ECN bits incorrectly when tunneling (or an intermediate router might be changing the header). Errors are also tracked via rx_frame_error. CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sit: allow to configure 6rd tunnels via netlinkNicolas Dichtel2012-11-201-25/+124
| | | | | | | | | | This patch add the support of 6RD tunnels management via netlink. Note that netdev_state_change() is now called when 6RD parameters are updated. 6RD parameters are updated only if there is at least one 6RD attribute. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Allow userns root to control ipv6Eric W. Biederman2012-11-181-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow an unpriviled user who has created a user namespace, and then created a network namespace to effectively use the new network namespace, by reducing capable(CAP_NET_ADMIN) and capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns, CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls. Settings that merely control a single network device are allowed. Either the network device is a logical network device where restrictions make no difference or the network device is hardware NIC that has been explicity moved from the initial network namespace. In general policy and network stack state changes are allowed while resource control is left unchanged. Allow the SIOCSIFADDR ioctl to add ipv6 addresses. Allow the SIOCDIFADDR ioctl to delete ipv6 addresses. Allow the SIOCADDRT ioctl to add ipv6 routes. Allow the SIOCDELRT ioctl to delete ipv6 routes. Allow creation of ipv6 raw sockets. Allow setting the IPV6_JOIN_ANYCAST socket option. Allow setting the IPV6_FL_A_RENEW parameter of the IPV6_FLOWLABEL_MGR socket option. Allow setting the IPV6_TRANSPARENT socket option. Allow setting the IPV6_HOPOPTS socket option. Allow setting the IPV6_RTHDRDSTOPTS socket option. Allow setting the IPV6_DSTOPTS socket option. Allow setting the IPV6_IPSEC_POLICY socket option. Allow setting the IPV6_XFRM_POLICY socket option. Allow sending packets with the IPV6_2292HOPOPTS control message. Allow sending packets with the IPV6_2292DSTOPTS control message. Allow sending packets with the IPV6_RTHDRDSTOPTS control message. Allow setting the multicast routing socket options on non multicast routing sockets. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL, and SIOCDELTUNNEL ioctls for setting up, changing and deleting tunnels over ipv6. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL, SIOCDELTUNNEL ioctls for setting up, changing and deleting ipv6 over ipv4 tunnels. Allow the SIOCADDPRL, SIOCDELPRL, SIOCCHGPRL ioctls for adding, deleting, and changing the potential router list for ISATAP tunnels. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sit: fix sparse warningsNicolas Dichtel2012-11-151-5/+5
| | | | | | | | | | | | | This change fixes several sparse warnings about endianness problem. The wrong nla_*() functions were used. It also fix a sparse warning about a flag test (field i_flags). This field is used in this file like a local flag only, so it is more an u16 (gre uses it as a be16). This sparse warning was already there before the patch that add netlink management, the code has just been moved. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sit: add support of link creation via rtnlNicolas Dichtel2012-11-141-28/+150
| | | | | | | This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sit: rename rtnl functions for consistencyNicolas Dichtel2012-11-141-4/+4
| | | | | | | Functions in this file start with ipip6_. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sit/rtnl: add missing parameters on dumpNicolas Dichtel2012-11-141-1/+8
| | | | | | | | IFLA_IPTUN_FLAGS and IFLA_IPTUN_PMTUDISC were missing. There is only one possible flag in i_flag: SIT_ISATAP. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sit: always notify change when params are updatedNicolas Dichtel2012-11-141-17/+15
| | | | | | | | | | | netdev_state_change() was called only when end points or link was updated. Now that all parameters are advertised via netlink, we must advertise any change. This patch also prepares the support of sit tunnels management via rtnl. The code which update tunnels will be put in a new function. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: unify for_each_ip_tunnel_rcu()Amerigo Wang2012-11-141-10/+3
| | | | | | | | | The defitions of for_each_ip_tunnel_rcu() are same, so unify it. Also, don't hide the parameter 't'. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: convert __IPTUNNEL_XMIT() to an inline functionAmerigo Wang2012-11-141-13/+1
| | | | | | | | | | | __IPTUNNEL_XMIT() is an ugly macro, convert it to a static inline function, so make it more readable. IPTUNNEL_XMIT() is unused, just remove it. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sit: advertise tunnel param via rtnlNicolas Dichtel2012-11-091-1/+56
| | | | | | | | | | | It is usefull for daemons that monitor link event to have the full parameters of these interfaces when a rtnl message is sent. It allows also to dump them via rtnetlink. It is based on what is done for GRE tunnels. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* xfrm: remove extranous rcu_read_lockstephen hemminger2012-09-271-6/+0
| | | | | | | | The handlers for xfrm_tunnel are always invoked with rcu read lock already. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Pass optional SKB and SK arguments to dst_ops->{update_pmtu,redirect}()David S. Miller2012-07-171-1/+1
| | | | | | | | | | | | | | | | This will be used so that we can compose a full flow key. Even though we have a route in this context, we need more. In the future the routes will be without destination address, source address, etc. keying. One ipv4 route will cover entire subnets, etc. In this environment we have to have a way to possess persistent storage for redirects and PMTU information. This persistent storage will exist in the FIB tables, and that's why we'll need to be able to rebuild a full lookup flow key here. Using that flow key will do a fib_lookup() and create/update the persistent entry. Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Add redirect support to all protocol icmp error handlers.David S. Miller2012-07-121-0/+8
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Handle PMTU in all ICMP error handlers.David S. Miller2012-06-141-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With ip_rt_frag_needed() removed, we have to explicitly update PMTU information in every ICMP error handler. Create two helper functions to facilitate this. 1) ipv4_sk_update_pmtu() This updates the PMTU when we have a socket context to work with. 2) ipv4_update_pmtu() Raw version, used when no socket context is available. For this interface, we essentially just pass in explicit arguments for the flow identity information we would have extracted from the socket. And you'll notice that ipv4_sk_update_pmtu() is simply implemented in terms of ipv4_update_pmtu() Note that __ip_route_output_key() is used, rather than something like ip_route_output_flow() or ip_route_output_key(). This is because we absolutely do not want to end up with a route that does IPSEC encapsulation and the like. Instead, we only want the route that would get us to the node described by the outermost IP header. Reported-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ipv6: Standardize prefixes for message loggingJoe Perches2012-05-161-2/+4
| | | | | | | | | | | | | | | | Add #define pr_fmt(fmt) as appropriate. Add "IPv6: " to appropriate files. Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG). Standardize on "%s: " not "%s(): " when emitting __func__. Use "%s: ", __func__ instead of embedding function name. Coalesce formats, align arguments. ADDRCONF output is now prefixed with "IPv6: " Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Convert net_ratelimit uses to net_<level>_ratelimitedJoe Perches2012-05-151-4/+2
| | | | | | | | | | Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tunnel: implement 64 bits statisticsstephen hemminger2012-04-141-18/+34
| | | | | | | | Convert the per-cpu statistics kept for GRE, IPIP, and SIT tunnels to use 64 bit statistics. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/ipv6/sit.c: Checkpatch cleanupEldad Zack2012-04-021-3/+3
| | | | | | | | | sit.c:118: ERROR: "foo * bar" should be "foo *bar" sit.c:694: ERROR: "(foo*)" should be "(foo *)" sit.c:724: ERROR: "(foo*)" should be "(foo *)" Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: sit: Convert to dst_neigh_lookup()David S. Miller2012-01-261-5/+15
| | | | | | | The only semantic difference is that we now hold a reference to the neighbour and thus have to release it. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: reintroduce missing rcu_assign_pointer() callsEric Dumazet2012-01-121-5/+5
| | | | | | | | | | | | | | commit a9b3cd7f32 (rcu: convert uses of rcu_assign_pointer(x, NULL) to RCU_INIT_POINTER) did a lot of incorrect changes, since it did a complete conversion of rcu_assign_pointer(x, y) to RCU_INIT_POINTER(x, y). We miss needed barriers, even on x86, when y is not NULL. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2011-12-161-1/+6
|\ | | | | | | | | | | | | Conflicts: drivers/net/ethernet/freescale/fsl_pq_mdio.c net/batman-adv/translation-table.c net/ipv6/route.c
| * ipip, sit: copy parms.name after register_netdeviceTed Feng2011-12-121-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Same fix as 731abb9cb2 for ipip and sit tunnel. Commit 1c5cae815d removed an explicit call to dev_alloc_name in ipip_tunnel_locate and ipip6_tunnel_locate, because register_netdevice will now create a valid name, however the tunnel keeps a copy of the name in the private parms structure. Fix this by copying the name back after register_netdevice has successfully returned. This shows up if you do a simple tunnel add, followed by a tunnel show: $ sudo ip tunnel add mode ipip remote 10.2.20.211 $ ip tunnel tunl0: ip/ip remote any local any ttl inherit nopmtudisc tunl%d: ip/ip remote 10.2.20.211 local any ttl inherit $ sudo ip tunnel add mode sit remote 10.2.20.212 $ ip tunnel sit0: ipv6/ip remote any local any ttl 64 nopmtudisc 6rd-prefix 2002::/16 sit%d: ioctl 89f8 failed: No such device sit%d: ipv6/ip remote 10.2.20.212 local any ttl inherit Cc: stable@vger.kernel.org Signed-off-by: Ted Feng <artisdom@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Rename dst_get_neighbour{, _raw} to dst_get_neighbour_noref{, _raw}.David Miller2011-12-051-2/+2
| | | | | | | | | | | | | | | | To reflect the fact that a refrence is not obtained to the resulting neighbour entry. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Roland Dreier <roland@purestorage.com>
* | net: remove ipv6_addr_copy()Alexey Dobriyan2011-11-221-2/+2
| | | | | | | | | | | | | | C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: better pcpu data alignmentEric Dumazet2011-11-081-1/+1
|/ | | | | | | | | | | Tunnels can force an alignment of their percpu data to reduce number of cache lines used in fast path, or read in .ndo_get_stats() percpu_alloc() is a very fine grained allocator, so any small hole will be used anyway. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller2011-08-201-0/+3
|\
| * sit tunnels: propagate IPv6 transport class to IPv4 Type of ServiceLionel Elie Mamane2011-08-161-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sit tunnels (IPv6 tunnel over IPv4) do not implement the "tos inherit" case to copy the IPv6 transport class byte from the inner packet to the IPv4 type of service byte in the outer packet. By contrast, ipip tunnels and GRE tunnels do. This patch, adapted from the similar code in net/ipv4/ipip.c and net/ipv4/ip_gre.c, implements that. This patch applies to 3.0.1, and has been tested on that version. Signed-off-by: Lionel Elie Mamane <lionel@mamane.lu> Signed-off-by: David S. Miller <davem@davemloft.net>
* | rcu: convert uses of rcu_assign_pointer(x, NULL) to RCU_INIT_POINTERStephen Hemminger2011-08-021-6/+6
|/ | | | | | | | | | | | | | | | | | | | When assigning a NULL value to an RCU protected pointer, no barrier is needed. The rcu_assign_pointer, used to handle that but will soon change to not handle the special case. Convert all rcu_assign_pointer of NULL value. //smpl @@ expression P; @@ - rcu_assign_pointer(P, NULL) + RCU_INIT_POINTER(P, NULL) // </smpl> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Abstract dst->neighbour accesses behind helpers.David S. Miller2011-07-171-2/+2
| | | | | | dst_{get,set}_neighbour() Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds2011-05-201-21/+19
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1446 commits) macvlan: fix panic if lowerdev in a bond tg3: Add braces around 5906 workaround. tg3: Fix NETIF_F_LOOPBACK error macvlan: remove one synchronize_rcu() call networking: NET_CLS_ROUTE4 depends on INET irda: Fix error propagation in ircomm_lmp_connect_response() irda: Kill set but unused variable 'bytes' in irlan_check_command_param() irda: Kill set but unused variable 'clen' in ircomm_connect_indication() rxrpc: Fix set but unused variable 'usage' in rxrpc_get_transport() be2net: Kill set but unused variable 'req' in lancer_fw_download() irda: Kill set but unused vars 'saddr' and 'daddr' in irlan_provider_connect_indication() atl1c: atl1c_resume() is only used when CONFIG_PM_SLEEP is defined. rxrpc: Fix set but unused variable 'usage' in rxrpc_get_peer(). rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler() rxrpc: Kill set but unused variable 'sp' in rxrpc_process_connection() rxrpc: Kill set but unused variable 'sp' in rxrpc_rotate_tx_window() pkt_sched: Kill set but unused variable 'protocol' in tc_classify() isdn: capi: Use pr_debug() instead of ifdefs. tg3: Update version to 3.119 tg3: Apply rx_discards fix to 5719/5720 ... Fix up trivial conflicts in arch/x86/Kconfig and net/mac80211/agg-tx.c as per Davem.
| * net: call dev_alloc_name from register_netdeviceJiri Pirko2011-05-051-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Force dev_alloc_name() to be called from register_netdevice() by dev_get_valid_name(). That allows to remove multiple explicit dev_alloc_name() calls. The possibility to call dev_alloc_name in advance remains. This also fixes veth creation regresion caused by 84c49d8c3e4abefb0a41a77b25aa37ebe8d6b743 Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv6: Use flowi4->{daddr,saddr} in ipip6_tunnel_xmit().David S. Miller2011-05-041-2/+2
| | | | | | | | | | | | Instead of rt->rt_{dst,src} Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv4: Make caller provide on-stack flow key to ip_route_output_ports().David S. Miller2011-05-031-2/+4
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * inet: constify ip headers and in6_addrEric Dumazet2011-04-221-12/+13
| | | | | | | | | | | | | | | | Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net,rcu: convert call_rcu(prl_entry_destroy_rcu) to kfreePaul E. McKenney2011-05-071-6/+1
|/ | | | | | | | | | | | | | The RCU callback prl_entry_destroy_rcu() just calls kfree(), so we can use kfree_rcu() instead of call_rcu(). Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: "Pekka Savola (ipv6)" <pekkas@netcore.fi> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Acked-by: David S. Miller <davem@davemloft.net> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
* ipv4: Create and use route lookup helpers.David S. Miller2011-03-121-17/+14
| | | | | | | The idea here is this minimizes the number of places one has to edit in order to make changes to how flows are defined and used. Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2011-03-101-1/+1
|\ | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x/bnx2x_cmn.c
| * net: don't allow CAP_NET_ADMIN to load non-netdev kernel modulesVasiliy Kulikov2011-03-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since a8f80e8ff94ecba629542d9b4b5f5a8ee3eb565c any process with CAP_NET_ADMIN may load any module from /lib/modules/. This doesn't mean that CAP_NET_ADMIN is a superset of CAP_SYS_MODULE as modules are limited to /lib/modules/**. However, CAP_NET_ADMIN capability shouldn't allow anybody load any module not related to networking. This patch restricts an ability of autoloading modules to netdev modules with explicit aliases. This fixes CVE-2011-1019. Arnd Bergmann suggested to leave untouched the old pre-v2.6.32 behavior of loading netdev modules by name (without any prefix) for processes with CAP_SYS_MODULE to maintain the compatibility with network scripts that use autoloading netdev modules by aliases like "eth0", "wlan0". Currently there are only three users of the feature in the upstream kernel: ipip, ip_gre and sit. root@albatros:~# capsh --drop=$(seq -s, 0 11),$(seq -s, 13 34) -- root@albatros:~# grep Cap /proc/$$/status CapInh: 0000000000000000 CapPrm: fffffff800001000 CapEff: fffffff800001000 CapBnd: fffffff800001000 root@albatros:~# modprobe xfs FATAL: Error inserting xfs (/lib/modules/2.6.38-rc6-00001-g2bf4ca3/kernel/fs/xfs/xfs.ko): Operation not permitted root@albatros:~# lsmod | grep xfs root@albatros:~# ifconfig xfs xfs: error fetching interface information: Device not found root@albatros:~# lsmod | grep xfs root@albatros:~# lsmod | grep sit root@albatros:~# ifconfig sit sit: error fetching interface information: Device not found root@albatros:~# lsmod | grep sit root@albatros:~# ifconfig sit0 sit0 Link encap:IPv6-in-IPv4 NOARP MTU:1480 Metric:1 root@albatros:~# lsmod | grep sit sit 10457 0 tunnel4 2957 1 sit For CAP_SYS_MODULE module loading is still relaxed: root@albatros:~# grep Cap /proc/$$/status CapInh: 0000000000000000 CapPrm: ffffffffffffffff CapEff: ffffffffffffffff CapBnd: ffffffffffffffff root@albatros:~# ifconfig xfs xfs: error fetching interface information: Device not found root@albatros:~# lsmod | grep xfs xfs 745319 0 Reference: https://lkml.org/lkml/2011/2/24/203 Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Kees Cook <kees.cook@canonical.com> Signed-off-by: James Morris <jmorris@namei.org>
* | ipv4: Make output route lookup return rtable directly.David S. Miller2011-03-021-3/+5
| | | | | | | | | | | | Instead of on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ipv6: sit: fix rcu annotationsEric Dumazet2011-01-201-10/+13
|/ | | | | | | Fix minor __rcu annotations and remove sparse warnings Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2010-12-081-1/+2
|\ | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/ath/ath9k/ar9003_eeprom.c net/llc/af_llc.c
| * net/ipv6/sit.c: return unhandled skb to tunnel4_rcvDavid McCullough2010-12-011-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | I found a problem using an IPv6 over IPv4 tunnel. When CONFIG_IPV6_SIT was enabled, the packets would be rejected as net/ipv6/sit.c was catching all IPPROTO_IPV6 packets and returning an ICMP port unreachable error. I think this patch fixes the problem cleanly. I believe the code in net/ipv4/tunnel4.c:tunnel4_rcv takes care of it properly if none of the handlers claim the skb. Signed-off-by: David McCullough <david_mccullough@mcafee.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: use the macros defined for the members of flowiChangli Gao2010-11-171-8/+6
|/ | | | | | | Use the macros defined for the members of flowi to clean the code up. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tunnels: Fix tunnels change rcu protectionPavel Emelyanov2010-10-271-0/+1
| | | | | | | | | | | | | | | | | | | | | After making rcu protection for tunnels (ipip, gre, sit and ip6) a bug was introduced into the SIOCCHGTUNNEL code. The tunnel is first unlinked, then addresses change, then it is linked back probably into another bucket. But while changing the parms, the hash table is unlocked to readers and they can lookup the improper tunnel. Respective commits are b7285b79 (ipip: get rid of ipip_lock), 1507850b (gre: get rid of ipgre_lock), 3a43be3c (sit: get rid of ipip6_lock) and 94767632 (ip6tnl: get rid of ip6_tnl_lock). The quick fix is to wait for quiescent state to pass after unlinking, but if it is inappropriate I can invent something better, just let me know. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: add a core netdev->rx_dropped counterEric Dumazet2010-10-051-2/+1
| | | | | | | | | | | | | | | | | | In various situations, a device provides a packet to our stack and we drop it before it enters protocol stack : - softnet backlog full (accounted in /proc/net/softnet_stat) - bad vlan tag (not accounted) - unknown/unregistered protocol (not accounted) We can handle a per-device counter of such dropped frames at core level, and automatically adds it to the device provided stats (rx_dropped), so that standard tools can be used (ifconfig, ip link, cat /proc/net/dev) This is a generalization of commit 8990f468a (net: rx_dropped accounting), thus reverting it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sit: enable lockless xmitsEric Dumazet2010-09-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SIT tunnels can benefit from lockless xmits, using NETIF_F_LLTX Bench on a 16 cpus machine (dual E5540 cpus), 16 threads sending 10000000 UDP frames via one sit tunnel (size:220 bytes per frame) Before patch : real 3m15.399s user 0m9.185s sys 51m55.403s 75029.00 87.5% _raw_spin_lock vmlinux 1090.00 1.3% dst_release vmlinux 902.00 1.1% dev_queue_xmit vmlinux 627.00 0.7% sock_wfree vmlinux 613.00 0.7% ip6_push_pending_frames ipv6.ko 505.00 0.6% __ip_route_output_key vmlinux After patch: real 1m1.387s user 0m12.489s sys 15m58.868s 28239.00 23.3% dst_release vmlinux 13570.00 11.2% ip6_push_pending_frames ipv6.ko 13118.00 10.8% ip6_append_data ipv6.ko 7995.00 6.6% __ip_route_output_key vmlinux 7924.00 6.5% sk_dst_check vmlinux 5015.00 4.1% udpv6_sendmsg ipv6.ko 3594.00 3.0% sock_alloc_send_pskb vmlinux 3135.00 2.6% sock_wfree vmlinux 3055.00 2.5% ip6_sk_dst_lookup ipv6.ko 2473.00 2.0% ip_finish_output vmlinux Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sit: fix percpu stats accountingEric Dumazet2010-09-291-3/+11
| | | | | | | | commit 15fc1f7056ebd (sit: percpu stats accounting) forgot the fallback tunnel case (sit0), and can crash pretty fast. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sit: percpu stats accountingEric Dumazet2010-09-271-18/+64
| | | | | | | | | | | | | Maintain per_cpu tx_bytes, tx_packets, rx_bytes, rx_packets. Other seldom used fields are kept in netdev->stats structure, possibly unsafe. This is a preliminary work to support lockless transmit path, and correct RX stats, that are already unsafe. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: rx_dropped accountingEric Dumazet2010-09-201-1/+4
| | | | | | | | | | | Under load, netif_rx() can drop incoming packets but administrators dont have a chance to spot which device needs some tuning (RPS activation for example) This patch adds rx_dropped accounting in vlans and tunnels. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud