summaryrefslogtreecommitdiffstats
path: root/net/ipv4/ip_vti.c
Commit message (Collapse)AuthorAgeFilesLines
* vti: get rid of nf mark rule in preroutingChristophe Gouault2013-10-111-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes and improves the use of vti interfaces (while lightly changing the way of configuring them). Currently: - it is necessary to identify and mark inbound IPsec packets destined to each vti interface, via netfilter rules in the mangle table at prerouting hook. - the vti module cannot retrieve the right tunnel in input since commit b9959fd3: vti tunnels all have an i_key, but the tunnel lookup is done with flag TUNNEL_NO_KEY, so there no chance to retrieve them. - the i_key is used by the outbound processing as a mark to lookup for the right SP and SA bundle. This patch uses the o_key to store the vti mark (instead of i_key) and enables: - to avoid the need for previously marking the inbound skbuffs via a netfilter rule. - to properly retrieve the right tunnel in input, only based on the IPsec packet outer addresses. - to properly perform an inbound policy check (using the tunnel o_key as a mark). - to properly perform an outbound SPD and SAD lookup (using the tunnel o_key as a mark). - to keep the current mark of the skbuff. The skbuff mark is neither used nor changed by the vti interface. Only the vti interface o_key is used. SAs have a wildcard mark. SPs have a mark equal to the vti interface o_key. The vti interface must be created as follows (i_key = 0, o_key = mark): ip link add vti1 mode vti local 1.1.1.1 remote 2.2.2.2 okey 1 The SPs attached to vti1 must be created as follows (mark = vti1 o_key): ip xfrm policy add dir out mark 1 tmpl src 1.1.1.1 dst 2.2.2.2 \ proto esp mode tunnel ip xfrm policy add dir in mark 1 tmpl src 2.2.2.2 dst 1.1.1.1 \ proto esp mode tunnel The SAs are created with the default wildcard mark. There is no distinction between global vs. vti SAs. Just their addresses will possibly link them to a vti interface: ip xfrm state add src 1.1.1.1 dst 2.2.2.2 proto esp spi 1000 mode tunnel \ enc "cbc(aes)" "azertyuiopqsdfgh" ip xfrm state add src 2.2.2.2 dst 1.1.1.1 proto esp spi 2000 mode tunnel \ enc "cbc(aes)" "sqbdhgqsdjqjsdfh" To avoid matching "global" (not vti) SPs in vti interfaces, global SPs should no use the default wildcard mark, but explicitly match mark 0. To avoid a double SPD lookup in input and output (in global and vti SPDs), the NOPOLICY and NOXFRM options should be set on the vti interfaces: echo 1 > /proc/sys/net/ipv4/conf/vti1/disable_policy echo 1 > /proc/sys/net/ipv4/conf/vti1/disable_xfrm The outgoing traffic is steered to vti1 by a route via the vti interface: ip route add 192.168.0.0/16 dev vti1 The incoming IPsec traffic is steered to vti1 because its outer addresses match the vti1 tunnel configuration. Signed-off-by: Christophe Gouault <christophe.gouault@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipip: add x-netns supportNicolas Dichtel2013-08-151-1/+1
| | | | | | | | | | | | | This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vti: switch to new ip tunnel codeAmerigo Wang2013-07-231-476/+52
| | | | | | | | | | | | GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vti: remove duplicated code to fix a memory leakCong Wang2013-07-011-7/+0
| | | | | | | | | | | | | | | | | vti module allocates dev->tstats twice: in vti_fb_tunnel_init() and in vti_tunnel_init(), this lead to a memory leak of dev->tstats. Just remove the duplicated operations in vti_fb_tunnel_init(). (candidate for -stable) Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/ipv4: ip_vti clear skb cb before tunneling.Saurabh Mohan2013-06-131-2/+1
| | | | | | | | | | If users apply shaper to vti tunnel then it will cause a kernel crash. The problem seems to be due to the vti_tunnel_xmit function not clearing skb->opt field before passing the packet to xfrm tunneling code. Signed-off-by: Saurabh Mohan <saurabh@vyatta.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Tunneling: use IP Tunnel stats APIs.Pravin B Shelar2013-03-261-39/+1
| | | | | | | Use common function get calculate rtnl_link_stats64 stats. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* GRE: Refactor GRE tunneling code.Pravin B Shelar2013-03-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Following patch refactors GRE code into ip tunneling code and GRE specific code. Common tunneling code is moved to ip_tunnel module. ip_tunnel module is written as generic library which can be used by different tunneling implementations. ip_tunnel module contains following components: - packet xmit and rcv generic code. xmit flow looks like (gre_xmit/ipip_xmit)->ip_tunnel_xmit->ip_local_out. - hash table of all devices. - lookup for tunnel devices. - control plane operations like device create, destroy, ioctl, netlink operations code. - registration for tunneling modules, like gre, ipip etc. - define single pcpu_tstats dev->tstats. - struct tnl_ptk_info added to pass parsed tunnel packet parameters. ipip.h header is renamed to ip_tunnel.h Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Allow userns root to control ipv4Eric W. Biederman2012-11-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow an unpriviled user who has created a user namespace, and then created a network namespace to effectively use the new network namespace, by reducing capable(CAP_NET_ADMIN) and capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns, CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls. Settings that merely control a single network device are allowed. Either the network device is a logical network device where restrictions make no difference or the network device is hardware NIC that has been explicity moved from the initial network namespace. In general policy and network stack state changes are allowed while resource control is left unchanged. Allow creating raw sockets. Allow the SIOCSARP ioctl to control the arp cache. Allow the SIOCSIFFLAG ioctl to allow setting network device flags. Allow the SIOCSIFADDR ioctl to allow setting a netdevice ipv4 address. Allow the SIOCSIFBRDADDR ioctl to allow setting a netdevice ipv4 broadcast address. Allow the SIOCSIFDSTADDR ioctl to allow setting a netdevice ipv4 destination address. Allow the SIOCSIFNETMASK ioctl to allow setting a netdevice ipv4 netmask. Allow the SIOCADDRT and SIOCDELRT ioctls to allow adding and deleting ipv4 routes. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls for adding, changing and deleting gre tunnels. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls for adding, changing and deleting ipip tunnels. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls for adding, changing and deleting ipsec virtual tunnel interfaces. Allow setting the MRT_INIT, MRT_DONE, MRT_ADD_VIF, MRT_DEL_VIF, MRT_ADD_MFC, MRT_DEL_MFC, MRT_ASSERT, MRT_PIM, MRT_TABLE socket options on multicast routing sockets. Allow setting and receiving IPOPT_CIPSO, IP_OPT_SEC, IP_OPT_SID and arbitrary ip options. Allow setting IP_SEC_POLICY/IP_XFRM_POLICY ipv4 socket option. Allow setting the IP_TRANSPARENT ipv4 socket option. Allow setting the TCP_REPAIR socket option. Allow setting the TCP_CONGESTION socket option. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2012-11-171-0/+5
|\ | | | | | | | | | | Minor line offset auto-merges. Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv4/ip_vti.c: VTI fix post-decryption forwardingSaurabh Mohan2012-11-141-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the latest kernel there are two things that must be done post decryption so that the packet are forwarded. 1. Remove the mark from the packet. This will cause the packet to not match the ipsec-policy again. However doing this causes the post-decryption check to fail also and the packet will get dropped. (cat /proc/net/xfrm_stat). 2. Remove the sp association in the skbuff so that no policy check is done on the packet for VTI tunnels. Due to #2 above we must now do a security-policy check in the vti rcv path prior to resetting the mark in the skbuff. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reported-by: Ruben Herold <ruben@puettmann.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: unify for_each_ip_tunnel_rcu()Amerigo Wang2012-11-141-9/+4
| | | | | | | | | | | | | | | | | | The defitions of for_each_ip_tunnel_rcu() are same, so unify it. Also, don't hide the parameter 't'. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: convert __IPTUNNEL_XMIT() to an inline functionAmerigo Wang2012-11-141-9/+0
|/ | | | | | | | | | | __IPTUNNEL_XMIT() is an ugly macro, convert it to a static inline function, so make it more readable. IPTUNNEL_XMIT() is unused, just remove it. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vti: fix sparse bit endian warningsstephen hemminger2012-10-121-2/+2
| | | | | | | Use be32_to_cpu instead of htonl to keep sparse happy. Signed-off-by: Stephen Hemminger <shemminger@vyatta.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* xfrm: remove extranous rcu_read_lockstephen hemminger2012-09-271-5/+0
| | | | | | | | The handlers for xfrm_tunnel are always invoked with rcu read lock already. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/ipv4/ip_vti.c: Fix __rcu warnings detected by sparse.Saurabh2012-07-231-5/+5
| | | | | | | | | With CONFIG_SPARSE_RCU_POINTER=y sparse identified references which did not specificy __rcu in ip_vti.c Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/ipv4: VTI support new module for ip_vti.Saurabh2012-07-181-0/+956
New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud