summaryrefslogtreecommitdiffstats
path: root/net/ceph
Commit message (Collapse)AuthorAgeFilesLines
* libceph: must hold mutex for reset_changed_osds()Alex Elder2013-05-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | An osd client has a red-black tree describing its osds, and occasionally we would get crashes due to one of these trees tree becoming corrupt somehow. The problem turned out to be that reset_changed_osds() was being called without protection of the osd client request mutex. That function would call __reset_osd() for any osd that had changed, and __reset_osd() would call __remove_osd() for any osd with no outstanding requests, and finally __remove_osd() would remove the corresponding entry from the red-black tree. Thus, the tree was getting modified without having any lock protection, and was vulnerable to problems due to concurrent updates. This appears to be the only osd tree updating path that has this problem. It can be fairly easily fixed by moving the call up a few lines, to just before the request mutex gets dropped in kick_requests(). This resolves: http://tracker.ceph.com/issues/5043 Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* libceph: init sent and completed when startingAlex Elder2013-05-131-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The rbd code has a need to be able to restart an osd request that has already been started and completed once before. This currently wouldn't work right because the osd client code assumes an osd request will be started exactly once Certain fields in a request are never cleared and this leads to trouble if you try to reuse it. Specifically, the r_sent, r_got_reply, and r_completed fields are never cleared. The r_sent field records the osd incarnation at the time the request was sent to that osd. If that's non-zero, the message won't get re-mapped to a target osd properly, and won't be put on the unsafe requests list the first time it's sent as it should. The r_got_reply field is used in handle_reply() to ensure the reply to a request is processed only once. And the r_completed field is used for lingering requests to avoid calling the callback function every time the osd client re-sends the request on behalf of its initiator. Each osd request passes through ceph_osdc_start_request() when responsibility for the request is handed over to the osd client for completion. We can safely zero these three fields there each time a request gets started. One last related change--clear the r_linger flag when a request is no longer registered as a linger request. This resolves: http://tracker.ceph.com/issues/5026 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: use slab cache for osd client requestsAlex Elder2013-05-022-2/+32
| | | | | | | | | | | Create a slab cache to manage allocation of ceph_osdc_request structures. This resolves: http://tracker.ceph.com/issues/3926 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: allocate ceph message data with a slab allocatorAlex Elder2013-05-021-3/+23
| | | | | | | | | | Create a slab cache to manage ceph_msg_data structure allocation. This is part of: http://tracker.ceph.com/issues/3926 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: allocate ceph messages with a slab allocatorAlex Elder2013-05-021-2/+27
| | | | | | | | | | Create a slab cache to manage ceph_msg structure allocation. This is part of: http://tracker.ceph.com/issues/3926 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: create source file "net/ceph/snapshot.c"Alex Elder2013-05-012-1/+79
| | | | | | | | | | | | | This creates a new source file "net/ceph/snapshot.c" to contain utility routines related to ceph snapshot contexts. The main motivation was to define ceph_create_snap_context() as a common way to create these structures, but I've moved the definitions of ceph_get_snap_context() and ceph_put_snap_context() there too. (The benefit of inlining those is very small, and I'd rather keep this collection of functions together.) Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: fix byte order mismatchAlex Elder2013-05-011-2/+1
| | | | | | | | | | | | | | | | | | | | | | A WATCH op includes an object version. The version that's supplied is incorrectly byte-swapped osd_req_op_watch_init() where it's first assigned (it's been this way since that code was first added). The result is that the version sent to the osd is wrong, because that value gets byte-swapped again in osd_req_encode_op(). This is the source of a sparse warning related to improper byte order in the assignment. The approach of using the version to avoid a race is deprecated (see http://tracker.ceph.com/issues/3871), and the watch parameter is no longer even examined by the osd. So fix the assignment in osd_req_op_watch_init() so it no longer does the byte swap. This resolves: http://tracker.ceph.com/issues/3847 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: support pages for class request dataAlex Elder2013-05-011-0/+12
| | | | | | | | Add the ability to provide an array of pages as outbound request data for object class method calls. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: fix two messenger bugsAlex Elder2013-05-011-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes four small changes in the ceph messenger. While getting copyup functionality working I found two bugs in the messenger. Existing paths through the code did not trigger these problems, but they're fixed here: - In ceph_msg_data_pagelist_cursor_init(), the cursor's last_piece field was being checked against the length supplied. This was OK until this commit: ccba6d98 libceph: implement multiple data items in a message That commit changed the cursor init routines to allow lengths to be supplied that exceeded the size of the current data item. Because of this, we have to use the assigned cursor resid field rather than the provided length in determining whether the cursor points to the last piece of a data item. - In ceph_msg_data_add_pages(), a BUG_ON() was erroneously catching attempts to add page data to a message if the message already had data assigned to it. That was OK until that same commit, at which point it was fine for messages to have multiple data items. It slipped through because that BUG_ON() call was present twice in that function. (You can never be too careful.) In addition two other minor things are changed: - In ceph_msg_data_cursor_init(), the local variable "data" was getting assigned twice. - In ceph_msg_data_advance(), it was assumed that the type-specific advance routine would set new_piece to true after it advanced past the last piece. That may have been fine, but since we check for that case we might as well set it explicitly in ceph_msg_data_advance(). This resolves: http://tracker.ceph.com/issues/4762 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: support raw data requestsAlex Elder2013-05-011-4/+34
| | | | | | | | | | | | | | | | | Allow osd request ops that aren't otherwise structured (not class, extent, or watch ops) to specify "raw" data to be used to hold incoming data for the op. Make use of this capability for the osd STAT op. Prefix the name of the private function osd_req_op_init() with "_", and expose a new function by that (earlier) name whose purpose is to initialize osd ops with (only) implied data. For now we'll just support the use of a page array for an osd op with incoming raw data. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: clean up osd data field access functionsAlex Elder2013-05-011-33/+15
| | | | | | | | | | | | | | There are a bunch of functions defined to encapsulate getting the address of a data field for a particular op in an osd request. They're all defined the same way, so create a macro to take the place of all of them. Two of these are used outside the osd client code, so preserve them (but convert them to use the new macro internally). Stop exporting the ones that aren't used elsewhere. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: kill off osd data write_request parametersAlex Elder2013-05-011-14/+11
| | | | | | | | | | | | In the incremental move toward supporting distinct data items in an osd request some of the functions had "write_request" parameters to indicate, basically, whether the data belonged to in_data or the out_data. Now that we maintain the data fields in the op structure there is no need to indicate the direction, so get rid of the "write_request" parameters. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: change how "safe" callback is usedAlex Elder2013-05-011-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An osd request currently has two callbacks. They inform the initiator of the request when we've received confirmation for the target osd that a request was received, and when the osd indicates all changes described by the request are durable. The only time the second callback is used is in the ceph file system for a synchronous write. There's a race that makes some handling of this case unsafe. This patch addresses this problem. The error handling for this callback is also kind of gross, and this patch changes that as well. In ceph_sync_write(), if a safe callback is requested we want to add the request on the ceph inode's unsafe items list. Because items on this list must have their tid set (by ceph_osd_start_request()), the request added *after* the call to that function returns. The problem with this is that there's a race between starting the request and adding it to the unsafe items list; the request may already be complete before ceph_sync_write() even begins to put it on the list. To address this, we change the way the "safe" callback is used. Rather than just calling it when the request is "safe", we use it to notify the initiator the bounds (start and end) of the period during which the request is *unsafe*. So the initiator gets notified just before the request gets sent to the osd (when it is "unsafe"), and again when it's known the results are durable (it's no longer unsafe). The first call will get made in __send_request(), just before the request message gets sent to the messenger for the first time. That function is only called by __send_queued(), which is always called with the osd client's request mutex held. We then have this callback function insert the request on the ceph inode's unsafe list when we're told the request is unsafe. This will avoid the race because this call will be made under protection of the osd client's request mutex. It also nicely groups the setup and cleanup of the state associated with managing unsafe requests. The name of the "safe" callback field is changed to "unsafe" to better reflect its new purpose. It has a Boolean "unsafe" parameter to indicate whether the request is becoming unsafe or is now safe. Because the "msg" parameter wasn't used, we drop that. This resolves the original problem reportedin: http://tracker.ceph.com/issues/4706 Reported-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
* libceph: make method call data be a separate data itemAlex Elder2013-05-011-18/+44
| | | | | | | | | | | | | | | | | | | | Right now the data for a method call is specified via a pointer and length, and it's copied--along with the class and method name--into a pagelist data item to be sent to the osd. Instead, encode the data in a data item separate from the class and method names. This will allow large amounts of data to be supplied to methods without copying. Only rbd uses the class functionality right now, and when it really needs this it will probably need to use a page array rather than a page list. But this simple implementation demonstrates the functionality on the osd client, and that's enough for now. This resolves: http://tracker.ceph.com/issues/4104 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: add, don't set data for a messageAlex Elder2013-05-012-14/+14
| | | | | | | | | | | | | Change the names of the functions that put data on a pagelist to reflect that we're adding to whatever's already there rather than just setting it to the one thing. Currently only one data item is ever added to a message, but that's about to change. This resolves: http://tracker.ceph.com/issues/2770 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: implement multiple data items in a messageAlex Elder2013-05-011-16/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support to the messenger for more than one data item in its data list. A message data cursor has two more fields to support this: - a count of the number of bytes left to be consumed across all data items in the list, "total_resid" - a pointer to the head of the list (for validation only) The cursor initialization routine has been split into two parts: the outer one, which initializes the cursor for traversing the entire list of data items; and the inner one, which initializes the cursor to start processing a single data item. When a message cursor is first initialized, the outer initialization routine sets total_resid to the length provided. The data pointer is initialized to the first data item on the list. From there, the inner initialization routine finishes by setting up to process the data item the cursor points to. Advancing the cursor consumes bytes in total_resid. If the resid field reaches zero, it means the current data item is fully consumed. If total_resid indicates there is more data, the cursor is advanced to point to the next data item, and then the inner initialization routine prepares for using that. (A check is made at this point to make sure we don't wrap around the front of the list.) The type-specific init routines are modified so they can be given a length that's larger than what the data item can support. The resid field is initialized to the smaller of the provided length and the length of the entire data item. When total_resid reaches zero, we're done. This resolves: http://tracker.ceph.com/issues/3761 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: replace message data pointer with listAlex Elder2013-05-011-15/+31
| | | | | | | | | In place of the message data pointer, use a list head which links through message data items. For now we only support a single entry on that list. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: have cursor point to dataAlex Elder2013-05-011-58/+55
| | | | | | | | | Rather than having a ceph message data item point to the cursor it's associated with, have the cursor point to a data item. This will allow a message cursor to be used for more than one data item. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: move cursor into messageAlex Elder2013-05-011-16/+19
| | | | | | | | | | | | | | | | | | | A message will only be processing a single data item at a time, so there's no need for each data item to have its own cursor. Move the cursor embedded in the message data structure into the message itself. To minimize the impact, keep the data->cursor field, but make it be a pointer to the cursor in the message. Move the definition of ceph_msg_data above ceph_msg_data_cursor so the cursor can point to the data without a forward definition rather than vice-versa. This and the upcoming patches are part of: http://tracker.ceph.com/issues/3761 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: record bio lengthAlex Elder2013-05-011-0/+1
| | | | | | | | The bio is the only data item type that doesn't record its full length. Fix that. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: skip message if too big to receiveAlex Elder2013-05-011-1/+9
| | | | | | | | | | | | | We know the length of our message buffers. If we get a message that's too long, just dump it and ignore it. If skip was set then con->in_msg won't be valid, so be careful not to dereference a null pointer in the process. This resolves: http://tracker.ceph.com/issues/4664 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: fix possible CONFIG_BLOCK build problemAlex Elder2013-05-011-1/+3
| | | | | | | | | | This patch: 15a0d7b libceph: record message data length did not enclose some bio-specific code inside CONFIG_BLOCK as it should have. Fix that. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: kill off osd request r_data_in and r_data_outAlex Elder2013-05-011-40/+39
| | | | | | | | | | | | | | | Finally! Convert the osd op data pointers into real structures, and make the switch over to using them instead of having all ops share the in and/or out data structures in the osd request. Set up a new function to traverse the set of ops and release any data associated with them (pages). This and the patches leading up to it resolve: http://tracker.ceph.com/issues/4657 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: set the data pointers when encoding opsAlex Elder2013-05-011-32/+31
| | | | | | | | | | | | | | | | | Still using the osd request r_data_in and r_data_out pointer, but we're basically only referring to it via the data pointers in the osd ops. And we're transferring that information to the request or reply message only when the op indicates it's needed, in osd_req_encode_op(). To avoid a forward reference, ceph_osdc_msg_data_set() was moved up in the file. Don't bother calling ceph_osd_data_init(), in ceph_osd_alloc(), because the ops array will already be zeroed anyway. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: combine initializing and setting osd dataAlex Elder2013-05-011-33/+122
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This ends up being a rather large patch but what it's doing is somewhat straightforward. Basically, this is replacing two calls with one. The first of the two calls is initializing a struct ceph_osd_data with data (either a page array, a page list, or a bio list); the second is setting an osd request op so it associates that data with one of the op's parameters. In place of those two will be a single function that initializes the op directly. That means we sort of fan out a set of the needed functions: - extent ops with pages data - extent ops with pagelist data - extent ops with bio list data and - class ops with page data for receiving a response We also have define another one, but it's only used internally: - class ops with pagelist data for request parameters Note that we *still* haven't gotten rid of the osd request's r_data_in and r_data_out fields. All the osd ops refer to them for their data. For now, these data fields are pointers assigned to the appropriate r_data_* field when these new functions are called. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: set message data when building osd requestAlex Elder2013-05-011-5/+5
| | | | | | | | | | | | | | | | | All calls of ceph_osdc_start_request() are preceded (in the case of rbd, almost) immediately by a call to ceph_osdc_build_request(). Move the build calls at the top of ceph_osdc_start_request() out of there and into the ceph_osdc_build_request(). Nothing prevents moving these calls to the top of ceph_osdc_build_request(), either (and we're going to want them there in the next patch) so put them at the top. This and the next patch are related to: http://tracker.ceph.com/issues/4657 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: move ceph_osdc_build_request()Alex Elder2013-05-011-98/+98
| | | | | | | | | This simply moves ceph_osdc_build_request() later in its source file without any change. Done as a separate patch to facilitate review of the change in the next patch. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: format class info at init timeAlex Elder2013-05-011-14/+15
| | | | | | | | | | | | | | | | | | An object class method is formatted using a pagelist which contains the class name, the method name, and the data concatenated into an osd request's outbound data. Currently when a class op is initialized in osd_req_op_cls_init(), the lengths of and pointers to these three items are recorded. Later, when the op is getting formatted into the request message, a new pagelist is created and that is when these items get copied into the pagelist. This patch makes it so the pagelist to hold these items is created when the op is initialized instead. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: specify osd op by index in requestAlex Elder2013-05-011-25/+39
| | | | | | | | | | | | | | | | | | | An osd request now holds all of its source op structures, and every place that initializes one of these is in fact initializing one of the entries in the the osd request's array. So rather than supplying the address of the op to initialize, have caller specify the osd request and an indication of which op it would like to initialize. This better hides the details the op structure (and faciltates moving the data pointers they use). Since osd_req_op_init() is a common routine, and it's not used outside the osd client code, give it static scope. Also make it return the address of the specified op (so all the other init routines don't have to repeat that code). Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: add data pointers in osd op structuresAlex Elder2013-05-011-1/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | An extent type osd operation currently implies that there will be corresponding data supplied in the data portion of the request (for write) or response (for read) message. Similarly, an osd class method operation implies a data item will be supplied to receive the response data from the operation. Add a ceph_osd_data pointer to each of those structures, and assign it to point to eithre the incoming or the outgoing data structure in the osd message. The data is not always available when an op is initially set up, so add two new functions to allow setting them after the op has been initialized. Begin to make use of the data item pointer available in the osd operation rather than the request data in or out structure in places where it's convenient. Add some assertions to verify pointers are always set the way they're expected to be. This is a sort of stepping stone toward really moving the data into the osd request ops, to allow for some validation before making that jump. This is the first in a series of patches that resolve: http://tracker.ceph.com/issues/4657 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: rename data out field in osd request opAlex Elder2013-05-011-9/+9
| | | | | | | | | | | | | | There are fields "indata" and "indata_len" defined the ceph osd request op structure. The "in" part is with from the point of view of the osd server, but is a little confusing here on the client side. Change their names to use "request" instead of "in" to indicate that it defines data provided with the request (as opposed the data returned in the response). Rename the local variable in osd_req_encode_op() to match. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: keep source rather than message osd op arrayAlex Elder2013-05-012-28/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An osd request keeps a pointer to the osd operations (ops) array that it builds in its request message. In order to allow each op in the array to have its own distinct data, we will need to keep track of each op's data, and that information does not go over the wire. As long as we're tracking the data we might as well just track the entire (source) op definition for each of the ops. And if we're doing that, we'll have no more need to keep a pointer to the wire-encoded version. This patch makes the array of source ops be kept with the osd request structure, and uses that instead of the version encoded in the message in places where that was previously used. The array will be embedded in the request structure, and the maximum number of ops we ever actually use is currently 2. So reduce CEPH_OSD_MAX_OP to 2 to reduce the size of the structure. The result of doing this sort of ripples back up, and as a result various function parameters and local variables become unnecessary. Make r_num_ops be unsigned, and move the definition of struct ceph_osd_req_op earlier to ensure it's defined where needed. It does not yet add per-op data, that's coming soon. This resolves: http://tracker.ceph.com/issues/4656 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: define ceph_osd_data_length()Alex Elder2013-05-011-5/+26
| | | | | | | | One more osd data helper, which returns the length of the data item, regardless of its type. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: define a few more helpersAlex Elder2013-05-011-18/+26
| | | | | | | | Define ceph_osd_data_init() and ceph_osd_data_release() to clean up a little code. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: define osd data initialization helpersAlex Elder2013-05-011-16/+39
| | | | | | | | Define and use functions that encapsulate the initializion of a ceph_osd_data structure. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: compute incoming bytes onceAlex Elder2013-05-011-4/+4
| | | | | | | | This is a simple change, extracting the number of incoming data bytes just once in handle_reply(). Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: provide data length when preparing messageAlex Elder2013-05-011-11/+8
| | | | | | | | | | | | | | | | In prepare_message_data(), the length used to initialize the cursor is taken from the header of the message provided. I'm working toward not using the header data length field to determine length in outbound messages, and this is a step in that direction. For inbound messages this will be set to be the actual number of bytes that are arriving (which may be less than the total size of the data buffer available). This resolves: http://tracker.ceph.com/issues/4589 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* ceph: build osd request message later for writepagesAlex Elder2013-05-011-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | Hold off building the osd request message in ceph_writepages_start() until just before it will be submitted to the osd client for execution. We'll still create the request and allocate the page pointer array after we learn we have at least one page to write. A local variable will be used to keep track of the allocated array of pages. Wait until just before submitting the request for assigning that page array pointer to the request message. Create ands use a new function osd_req_op_extent_update() whose purpose is to serve this one spot where the length value supplied when an osd request's op was initially formatted might need to get changed (reduced, never increased) before submitting the request. Previously, ceph_writepages_start() assigned the message header's data length because of this update. That's no longer necessary, because ceph_osdc_build_request() will recalculate the right value to use based on the content of the ops in the request. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: hold off building osd requestAlex Elder2013-05-011-4/+4
| | | | | | | | | Defer building the osd request until just before submitting it in all callers except ceph_writepages_start(). (That caller will be handed in the next patch.) Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: don't build request in ceph_osdc_new_request()Alex Elder2013-05-011-19/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves the call to ceph_osdc_build_request() out of ceph_osdc_new_request() and into its caller. This is in order to defer formatting osd operation information into the request message until just before request is started. The only unusual (ab)user of ceph_osdc_build_request() is ceph_writepages_start(), where the final length of write request may change (downward) based on the current inode size or the oldest snapshot context with dirty data for the inode. The remaining callers don't change anything in the request after has been built. This means the ops array is now supplied by the caller. It also means there is no need to pass the mtime to ceph_osdc_new_request() (it gets provided to ceph_osdc_build_request()). And rather than passing a do_sync flag, have the number of ops in the ops array supplied imply adding a second STARTSYNC operation after the READ or WRITE requested. This and some of the patches that follow are related to having the messenger (only) be responsible for filling the content of the message header, as described here: http://tracker.ceph.com/issues/4589 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: record message data lengthAlex Elder2013-05-012-2/+10
| | | | | | | | | | Keep track of the length of the data portion for a message in a separate field in the ceph_msg structure. This information has been maintained in wire byte order in the message header, but that's going to change soon. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: drop ceph_osd_request->r_con_filling_msgAlex Elder2013-05-011-24/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A field in an osd request keeps track of whether a connection is currently filling the request's reply message. This patch gets rid of that field. An osd request includes two messages--a request and a reply--and they're both associated with the connection that existed to its the target osd at the time the request was created. An osd request can be dropped early, even when it's in flight. And at that time both messages are released. It's possible the reply message has been supplied to its connection to receive an incoming response message at the time the osd request gets dropped. So ceph_osdc_release_request() revokes that message from the connection before releasing it so things get cleaned up properly. Previously this may have caused a problem, because the connection that a message was associated with might have gone away before the revoke request. And to avoid any problems using that connection, the osd client held a reference to it when it supplies its response message. However since this commit: 38941f80 libceph: have messages point to their connection all messages hold a reference to the connection they are associated with whenever the connection is actively operating on the message (i.e. while the message is queued to send or sending, and when it data is being received into it). And if a message has no connection associated with it, ceph_msg_revoke_incoming() won't do anything when asked to revoke it. As a result, there is no need to keep an additional reference to the connection associated with a message when we hand the message to the messenger when it calls our alloc_msg() method to receive something. If the connection *were* operating on it, it would have its own reference, and if not, there's no work to be done when we need to revoke it. So get rid of the osd request's r_con_filling_msg field. This resolves: http://tracker.ceph.com/issues/4647 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: define ceph_decode_pgid() only onceAlex Elder2013-05-012-41/+3
| | | | | | | | | | There are two basically identical definitions of __decode_pgid() in libceph, one in "net/ceph/osdmap.c" and the other in "net/ceph/osd_client.c". Get rid of both, and instead define a single inline version in "include/linux/ceph/osdmap.h". Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: drop mutex on error in handle_reply()Alex Elder2013-05-011-2/+3
| | | | | | | | | | | | | | | | The osd client mutex is acquired just before getting a reference to a request in handle_reply(). However the error paths after that don't drop the mutex before returning as they should. Drop the mutex after dropping the request reference. Also add a bad_mutex label at that point and use it so the failed request lookup case can be handled with the rest. This resolves: http://tracker.ceph.com/issues/4615 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
* libceph: use osd_req_op_extent_init()Alex Elder2013-05-011-10/+3
| | | | | | | | Use osd_req_op_extent_init() in ceph_osdc_new_request() to initialize the one or two ops built in that function. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: clean up ceph_osd_new_request()Alex Elder2013-05-011-28/+22
| | | | | | | | | | | | | | All callers of ceph_osd_new_request() pass either CEPH_OSD_OP_READ or CEPH_OSD_OP_WRITE as the opcode value. The function assumes it by filling in the extent fields in the ops array it builds. So just assert that is the case, and don't bother calling op_has_extent() before filling in the first osd operation in the array. Define some local variables to gather the information to fill into the first op, and then fill in the op array all in one place. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: don't update op in calc_layout()Alex Elder2013-05-011-18/+18
| | | | | | | | | | | | The ceph_osdc_new_request() an array of osd operations is built up and filled in partially within that function and partially in the called function calc_layout(). Move the latter part back out to ceph_osdc_new_request() so it's all done in one place. This makes it unnecessary to pass the op pointer to calc_layout(), so get rid of that parameter. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: pass offset and length out of calc_layout()Alex Elder2013-05-011-15/+17
| | | | | | | | | | | | | | | | | | | | The purpose of calc_layout() is to determine, given a file offset and length and a layout describing the placement of file data across objects, where in "object space" that data resides. Specifically, it determines which object should hold the first part of the specified range of file data, and the offset and length of data within that object. The length will not exceed the bounds of the object, and the caller is informed of that maximum length. Add two parameters to calc_layout() to allow the object-relative offset and length to be passed back to the caller. This is the first steps toward having ceph_osdc_new_request() build its osd op structure using osd_req_op_extent_init(). Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: define source request op functionsAlex Elder2013-05-011-0/+84
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
* libceph: define osd_req_opcode_valid()Alex Elder2013-05-011-54/+72
| | | | | | | | | | | | Define a separate function to determine the validity of an opcode, and use it inside osd_req_encode_op() in order to unclutter that function. Don't update the destination op at all--and return zero--if an unsupported or unrecognized opcode is seen in osd_req_encode_op(). Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
OpenPOWER on IntegriCloud