summaryrefslogtreecommitdiffstats
path: root/net/bridge/br_stp_if.c
Commit message (Collapse)AuthorAgeFilesLines
* bridge: Change local fdb entries whenever mac address of bridge device changesToshiaki Makita2014-02-101-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Vlan code may need fdb change when changing mac address of bridge device even if it is caused by the mac address changing of a bridge port. Example configuration: ip link set eth0 address 12:34:56:78:90:ab ip link set eth1 address aa:bb:cc:dd:ee:ff brctl addif br0 eth0 brctl addif br0 eth1 # br0 will have mac address 12:34:56:78:90:ab bridge vlan add dev br0 vid 10 self bridge vlan add dev eth0 vid 10 We will have fdb entry such that f->dst == NULL, f->vlan_id == 10 and f->addr == 12:34:56:78:90:ab at this time. Next, change the mac address of eth0 to greater value. ip link set eth0 address ee:ff:12:34:56:78 Then, mac address of br0 will be recalculated and set to aa:bb:cc:dd:ee:ff. However, an entry aa:bb:cc:dd:ee:ff will not be created and we will be not able to communicate using br0 on vlan 10. Address this issue by deleting and adding local entries whenever changing the mac address of the bridge device. If there already exists an entry that has the same address, for example, in case that br_fdb_changeaddr() has already inserted it, br_fdb_change_mac_address() will simply fail to insert it and no duplicated entry will be made, as it was. This approach also needs br_add_if() to call br_fdb_insert() before br_stp_recalculate_bridge_id() so that we don't create an entry whose dst == NULL in this function to preserve previous behavior. Note that this is a slight change in behavior where the bridge device can receive the traffic to the new address before calling br_stp_recalculate_bridge_id() in br_add_if(). However, it is not a problem because we have already the address on the new port and such a way to insert new one before recalculating bridge id is taken in br_device_event() as well. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: Correctly clamp MAX forward_delay when enabling STPVlad Yasevich2013-10-171-1/+1
| | | | | | | | | | | | | | | | | Commit be4f154d5ef0ca147ab6bcd38857a774133f5450 bridge: Clamp forward_delay when enabling STP had a typo when attempting to clamp maximum forward delay. It is possible to set bridge_forward_delay to be higher then permitted maximum when STP is off. When turning STP on, the higher then allowed delay has to be clamed down to max value. CC: Herbert Xu <herbert@gondor.apana.org.au> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Reviewed-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: Clamp forward_delay when enabling STPHerbert Xu2013-09-121-2/+10
| | | | | | | | | | | | | | | | | | | At some point limits were added to forward_delay. However, the limits are only enforced when STP is enabled. This created a scenario where you could have a value outside the allowed range while STP is disabled, which then stuck around even after STP is enabled. This patch fixes this by clamping the value when we enable STP. I had to move the locking around a bit to ensure that there is no window where someone could insert a value outside the range while we're in the middle of enabling STP. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cheers, Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: make user modified path cost stickystephen hemminger2013-04-151-0/+1
| | | | | | | | | | Keep a STP port path cost value if it was set by a user. Don't replace it with the link-speed based path cost whenever the link goes down and comes back up. Reported-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: use dev->addr_assign_type to see if user change macJiri Pirko2013-02-111-1/+1
| | | | | | | | And remove no longer used br->flags. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: respect RFC2863 operational statestephen hemminger2012-12-301-1/+1
| | | | | | | | | | | The bridge link detection should follow the operational state of the lower device, rather than the carrier bit. This allows devices like tunnels that are controlled by userspace control plane to work with bridge STP link management. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: Convert compare_ether_addr to ether_addr_equalJoe Perches2012-05-091-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: fix state reporting when port is disabledPaulius Zaleckas2012-03-081-2/+1
| | | | | | | | | | | | | | Now we have: eth0: link *down* br0: port 1(eth0) entered *forwarding* state br_log_state(p) should be called *after* p->state is set to BR_STATE_DISABLED. Reported-by: Zilvinas Valinskas <zilvinas@wilibox.com> Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: fix implicit kmod.h usage in bridge/br_stp_if.cPaul Gortmaker2011-10-311-0/+1
| | | | | | | | | | To fix this, once the implicit presence of module.h is removed: net/bridge/br_stp_if.c: In function ‘br_stp_start’: net/bridge/br_stp_if.c:131: error: implicit declaration of function ‘call_usermodehelper’ net/bridge/br_stp_if.c:131: error: ‘UMH_WAIT_PROC’ undeclared (first use in this function) Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* bridge: add notification over netlink when STP changes statestephen hemminger2011-07-221-0/+3
| | | | | | | | When STP changes state of interface need to send a new link message to reflect that change. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: range check STP parametersstephen hemminger2011-04-041-4/+17
| | | | | | | | | | | | | | | | | | | | | | | | Apply restrictions on STP parameters based 802.1D 1998 standard. * Fixes missing locking in set path cost ioctl * Uses common code for both ioctl and sysfs This is based on an earlier patch Sasikanth V but with overhaul. Note: 1. It does NOT enforce the restriction on the relationship max_age and forward delay or hello time because in existing implementation these are set as independant operations. 2. If STP is disabled, there is no restriction on forward delay 3. No restriction on holding time because users use Linux code to act as hub or be sticky. 4. Although standard allow 0-255, Linux only allows 0-63 for port priority because more bits are reserved for port number. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: Fix compilation warning in function br_stp_recalculate_bridge_id()Balaji G2011-03-291-1/+1
| | | | | | | | | net/bridge/br_stp_if.c: In function ‘br_stp_recalculate_bridge_id’: net/bridge/br_stp_if.c:216:3: warning: ‘return’ with no value, in function returning non-void Signed-off-by: G.Balaji <balajig81@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: notify applications if address of bridge device changesstephen hemminger2011-03-271-3/+6
| | | | | | | | | | The mac address of the bridge device may be changed when a new interface is added to the bridge. If this happens, then the bridge needs to call the network notifiers to tickle any other systems that care. Since bridge can be a module, this also means exporting the notifier function. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/bridge: fix trivial sparse errorsTomas Winkler2011-01-031-1/+1
| | | | | | | | | | | net/bridge//br_stp_if.c:148:66: warning: conversion of net/bridge//br_stp_if.c:148:66: int to net/bridge//br_stp_if.c:148:66: int enum umh_wait net/bridge//netfilter/ebtables.c:1150:30: warning: Using plain integer as NULL pointer Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: change console message interfacestephen hemminger2010-05-151-10/+6
| | | | | | | | | | Use one set of macro's for all bridge messages. Note: can't use netdev_XXX macro's because bridge is purely virtual and has no device parent. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: Add multicast start/stop hooksHerbert Xu2010-02-281-0/+1
| | | | | | | | This patch hooks up the bridge start/stop and add/delete/disable port functions to the new multicast module. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: make bridge address settings stickyStephen Hemminger2008-06-171-0/+4
| | | | | | | | | Normally, the bridge just chooses the smallest mac address as the bridge id and mac address of bridge device. But if the administrator has explictly set the interface address then don't change it. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: remove CVS keywordsAdrian Bunk2008-06-111-2/+0
| | | | | | | | This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BRIDGE]: Fix typo in net/bridge/br_stp_if.cJussi Kivilinna2007-08-141-1/+1
| | | | | | Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* usermodehelper: Tidy up waitingJeremy Fitzhardinge2007-07-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Rather than using a tri-state integer for the wait flag in call_usermodehelper_exec, define a proper enum, and use that. I've preserved the integer values so that any callers I've missed should still work OK. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Andi Kleen <ak@suse.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Joel Becker <joel.becker@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: David Howells <dhowells@redhat.com>
* header cleaning: don't include smp_lock.h when not usedRandy Dunlap2007-05-081-1/+0
| | | | | | | | | | | | Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* bridge: change when netlink events go to STPStephen Hemminger2007-04-251-3/+0
| | | | | | | Need to tell STP daemon about more events, like any time a device is added even when it is down. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
* bridge: add support for user mode STPStephen Hemminger2007-04-251-0/+56
| | | | | | | | | | This patchset based on work by Aji_Srinivas@emc.com provides allows spanning tree to be controled from userspace. Like hotplug, it uses call_usermodehelper when spanning tree is enabled so there is no visible API change. If call to start usermode STP fails it falls back to existing kernel STP. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
* [BRIDGE]: Unaligned access when comparing ethernet addressesEvgeny Kravtsunov2007-04-171-2/+7
| | | | | | | | | | | | | compare_ether_addr() implicitly requires that the addresses passed are 2-bytes aligned in memory. This is not true for br_stp_change_bridge_id() and br_stp_recalculate_bridge_id() in which one of the addresses is unsigned char *, and thus may not be 2-bytes aligned. Signed-off-by: Evgeny Kravtsunov <emkravts@openvz.org> Signed-off-by: Kirill Korotaev <dev@openvz.org> Signed-off-by: Pavel Emelianov <xemul@openvz.org>
* [NET] BRIDGE: Fix whitespace errors.YOSHIFUJI Hideaki2007-02-101-2/+2
| | | | | Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BRIDGE]: flush forwarding table when device carrier offStephen Hemminger2006-10-151-0/+2
| | | | | | | | | Flush the forwarding table when carrier is lost. This helps for availability because we don't want to forward to a downed device and new packets may come in on other links. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BRIDGE]: netlink interface for link managementStephen Hemminger2006-06-171-0/+4
| | | | | | | | | | | | | | | | Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BRIDGE]: port timer initializationStephen Hemminger2006-03-041-2/+0
| | | | | | | | | Initialize the STP timers for a port when it is created, rather than when it is enabled. This will prevent future race conditions where timer gets started before port is enabled. Signed-off-by: Stephen Hemminger <shemmigner@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BRIDGE]: Fix deadlock in br_stp_disable_bridgeAdrian Drzewiecki2006-02-151-2/+2
| | | | | | | | | | Looks like somebody forgot to use the _bh spin_lock variant. We ran into a deadlock where br->hello_timer expired while br_stp_disable_br() walked br->port_list. Signed-off-by: Adrian Drzewiecki <z@drze.net> Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BRIDGE]: Fix faulty check in br_stp_recalculate_bridge_id()Stephen Hemminger2006-01-031-1/+1
| | | | | | | | | One of the conversions from memcmp to compare_ether_addr is incorrect. We need to do relative comparison to determine min MAC address to use in bridge id. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BRIDGE]: allow setting hardware address of bridge pseudo-devStephen Hemminger2006-01-031-2/+1
| | | | | | | | | | Some people are using bridging to hide multiple machines from an ISP that restricts by MAC address. So in that case allow the bridge mac address to be set to any of the existing interfaces. I don't want to allow any arbitrary value and confuse STP. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BRIDGE]: Use ether_compareStephen Hemminger2005-10-311-4/+5
| | | | | | | Use compare_ether_addr in bridge code. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-161-0/+225
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
OpenPOWER on IntegriCloud