summaryrefslogtreecommitdiffstats
path: root/mm/page-writeback.c
Commit message (Collapse)AuthorAgeFilesLines
* memcg: add per cgroup writeback pages accountingSha Zhengju2013-09-121-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add memcg routines to count writeback pages, later dirty pages will also be accounted. After Kame's commit 89c06bd52fb9 ("memcg: use new logic for page stat accounting"), we can use 'struct page' flag to test page state instead of per page_cgroup flag. But memcg has a feature to move a page from a cgroup to another one and may have race between "move" and "page stat accounting". So in order to avoid the race we have designed a new lock: mem_cgroup_begin_update_page_stat() modify page information -->(a) mem_cgroup_update_page_stat() -->(b) mem_cgroup_end_update_page_stat() It requires both (a) and (b)(writeback pages accounting) to be pretected in mem_cgroup_{begin/end}_update_page_stat(). It's full no-op for !CONFIG_MEMCG, almost no-op if memcg is disabled (but compiled in), rcu read lock in the most cases (no task is moving), and spin_lock_irqsave on top in the slow path. There're two writeback interfaces to modify: test_{clear/set}_page_writeback(). And the lock order is: --> memcg->move_lock --> mapping->tree_lock Signed-off-by: Sha Zhengju <handai.szj@taobao.com> Acked-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Greg Thelen <gthelen@google.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm/page-writeback.c: add strictlimit featureMaxim Patlasov2013-09-111-61/+202
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: vmscan: fix do_try_to_free_pages() livelockLisa Du2013-09-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is based on KOSAKI's work and I add a little more description, please refer https://lkml.org/lkml/2012/6/14/74. Currently, I found system can enter a state that there are lots of free pages in a zone but only order-0 and order-1 pages which means the zone is heavily fragmented, then high order allocation could make direct reclaim path's long stall(ex, 60 seconds) especially in no swap and no compaciton enviroment. This problem happened on v3.4, but it seems issue still lives in current tree, the reason is do_try_to_free_pages enter live lock: kswapd will go to sleep if the zones have been fully scanned and are still not balanced. As kswapd thinks there's little point trying all over again to avoid infinite loop. Instead it changes order from high-order to 0-order because kswapd think order-0 is the most important. Look at 73ce02e9 in detail. If watermarks are ok, kswapd will go back to sleep and may leave zone->all_unreclaimable =3D 0. It assume high-order users can still perform direct reclaim if they wish. Direct reclaim continue to reclaim for a high order which is not a COSTLY_ORDER without oom-killer until kswapd turn on zone->all_unreclaimble= . This is because to avoid too early oom-kill. So it means direct_reclaim depends on kswapd to break this loop. In worst case, direct-reclaim may continue to page reclaim forever when kswapd sleeps forever until someone like watchdog detect and finally kill the process. As described in: http://thread.gmane.org/gmane.linux.kernel.mm/103737 We can't turn on zone->all_unreclaimable from direct reclaim path because direct reclaim path don't take any lock and this way is racy. Thus this patch removes zone->all_unreclaimable field completely and recalculates zone reclaimable state every time. Note: we can't take the idea that direct-reclaim see zone->pages_scanned directly and kswapd continue to use zone->all_unreclaimable. Because, it is racy. commit 929bea7c71 (vmscan: all_unreclaimable() use zone->all_unreclaimable as a name) describes the detail. [akpm@linux-foundation.org: uninline zone_reclaimable_pages() and zone_reclaimable()] Cc: Aaditya Kumar <aaditya.kumar.30@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Nick Piggin <npiggin@gmail.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux.com> Cc: Bob Liu <lliubbo@gmail.com> Cc: Neil Zhang <zhangwm@marvell.com> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Lisa Du <cldu@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: revert "page-writeback.c: subtract min_free_kbytes from dirtyable memory"Johannes Weiner2013-09-111-3/+0
| | | | | | | | | | | | | | | | | This reverts commit 75f7ad8e043d. It was the result of a problem observed with a 3.2 kernel and merged in 3.9, while the issue had been resolved upstream in 3.3 (commit ab8fabd46f81: "mm: exclude reserved pages from dirtyable memory"). The "reserved pages" are a superset of min_free_kbytes, thus this change is redundant and confusing. Revert it. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Paul Szabo <psz@maths.usyd.edu.au> Cc: Rik van Riel <riel@redhat.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* kernel: delete __cpuinit usage from all core kernel filesPaul Gortmaker2013-07-141-2/+2
| | | | | | | | | | | | | | | | | | | | | The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the uses of the __cpuinit macros from C files in the core kernel directories (kernel, init, lib, mm, and include) that don't really have a specific maintainer. [1] https://lkml.org/lkml/2013/5/20/589 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* mm: make snapshotting pages for stable writes a per-bio operationDarrick J. Wong2013-04-291-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | Walking a bio's page mappings has proved problematic, so create a new bio flag to indicate that a bio's data needs to be snapshotted in order to guarantee stable pages during writeback. Next, for the one user (ext3/jbd) of snapshotting, hook all the places where writes can be initiated without PG_writeback set, and set BIO_SNAP_STABLE there. We must also flag journal "metadata" bios for stable writeout, since file data can be written through the journal. Finally, the MS_SNAP_STABLE mount flag (only used by ext3) is now superfluous, so get rid of it. [akpm@linux-foundation.org: rename _submit_bh()'s `flags' to `bio_flags', delobotomize the _submit_bh declaration] [akpm@linux-foundation.org: teeny cleanup] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'writeback-fixes' of ↵Linus Torvalds2013-02-281-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux Pull writeback fixes from Wu Fengguang: "Two writeback fixes - fix negative (setpoint - dirty) in 32bit archs - use down_read_trylock() in writeback_inodes_sb(_nr)_if_idle()" * tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: Negative (setpoint-dirty) in bdi_position_ratio() vfs: re-implement writeback_inodes_sb(_nr)_if_idle() and rename them
| * Negative (setpoint-dirty) in bdi_position_ratio()paul.szabo@sydney.edu.au2013-01-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In bdi_position_ratio(), get difference (setpoint-dirty) right even when negative. Both setpoint and dirty are unsigned long, the difference was zero-padded thus wrongly sign-extended to s64. This issue affects all 32-bit architectures, does not affect 64-bit architectures where long and s64 are equivalent. In this function, dirty is between freerun and limit, the pseudo-float x is between [-1,1], expected to be negative about half the time. With zero-padding, instead of a small negative x we obtained a large positive one so bdi_position_ratio() returned garbage. Casting the difference to s64 also prevents overflow with left-shift; though normally these numbers are small and I never observed a 32-bit overflow there. (This patch does not solve the PAE OOM issue.) Paul Szabo psz@maths.usyd.edu.au http://www.maths.usyd.edu.au/u/psz/ School of Mathematics and Statistics University of Sydney Australia Reviewed-by: Jan Kara <jack@suse.cz> Reported-by: Paul Szabo <psz@maths.usyd.edu.au> Reference: http://bugs.debian.org/695182 Signed-off-by: Paul Szabo <psz@maths.usyd.edu.au> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
* | Merge branch 'for-3.9/core' of git://git.kernel.dk/linux-blockLinus Torvalds2013-02-281-0/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block IO core bits from Jens Axboe: "Below are the core block IO bits for 3.9. It was delayed a few days since my workstation kept crashing every 2-8h after pulling it into current -git, but turns out it is a bug in the new pstate code (divide by zero, will report separately). In any case, it contains: - The big cfq/blkcg update from Tejun and and Vivek. - Additional block and writeback tracepoints from Tejun. - Improvement of the should sort (based on queues) logic in the plug flushing. - _io() variants of the wait_for_completion() interface, using io_schedule() instead of schedule() to contribute to io wait properly. - Various little fixes. You'll get two trivial merge conflicts, which should be easy enough to fix up" Fix up the trivial conflicts due to hlist traversal cleanups (commit b67bfe0d42ca: "hlist: drop the node parameter from iterators"). * 'for-3.9/core' of git://git.kernel.dk/linux-block: (39 commits) block: remove redundant check to bd_openers() block: use i_size_write() in bd_set_size() cfq: fix lock imbalance with failed allocations drivers/block/swim3.c: fix null pointer dereference block: don't select PERCPU_RWSEM block: account iowait time when waiting for completion of IO request sched: add wait_for_completion_io[_timeout] writeback: add more tracepoints block: add block_{touch|dirty}_buffer tracepoint buffer: make touch_buffer() an exported function block: add @req to bio_{front|back}_merge tracepoints block: add missing block_bio_complete() tracepoint block: Remove should_sort judgement when flush blk_plug block,elevator: use new hashtable implementation cfq-iosched: add hierarchical cfq_group statistics cfq-iosched: collect stats from dead cfqgs cfq-iosched: separate out cfqg_stats_reset() from cfq_pd_reset_stats() blkcg: make blkcg_print_blkgs() grab q locks instead of blkcg lock block: RCU free request_queue blkcg: implement blkg_[rw]stat_recursive_sum() and blkg_[rw]stat_merge() ...
| * | writeback: add more tracepointsTejun Heo2013-01-141-0/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add tracepoints for page dirtying, writeback_single_inode start, inode dirtying and writeback. For the latter two inode events, a pair of events are defined to denote start and end of the operations (the starting one has _start suffix and the one w/o suffix happens after the operation is complete). These inode ops are FS specific and can be non-trivial and having enclosing tracepoints is useful for external tracers. This is part of tracepoint additions to improve visiblity into dirtying / writeback operations for io tracer and userland. v2: writeback_dirty_inode[_start] TPs may be called for files on pseudo FSes w/ unregistered bdi. Check whether bdi->dev is %NULL before dereferencing. v3: buffer dirtying moved to a block TP. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | page-writeback.c: subtract min_free_kbytes from dirtyable memoryPaul Szabo2013-02-231-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When calculating amount of dirtyable memory, min_free_kbytes should be subtracted because it is not intended for dirty pages. Addresses http://bugs.debian.org/695182 [akpm@linux-foundation.org: fix up min_free_kbytes extern declarations] [akpm@linux-foundation.org: fix min() warning] Signed-off-by: Paul Szabo <psz@maths.usyd.edu.au> Acked-by: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | block: optionally snapshot page contents to provide stable pages during writeDarrick J. Wong2013-02-211-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This provides a band-aid to provide stable page writes on jbd without needing to backport the fixed locking and page writeback bit handling schemes of jbd2. The band-aid works by using bounce buffers to snapshot page contents instead of waiting. For those wondering about the ext3 bandage -- fixing the jbd locking (which was done as part of ext4dev years ago) is a lot of surgery, and setting PG_writeback on data pages when we actually hold the page lock dropped ext3 performance by nearly an order of magnitude. If we're going to migrate iscsi and raid to use stable page writes, the complaints about high latency will likely return. We might as well centralize their page snapshotting thing to one place. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Tested-by: Andy Lutomirski <luto@amacapital.net> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | mm: only enforce stable page writes if the backing device requires itDarrick J. Wong2013-02-211-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create a helper function to check if a backing device requires stable page writes and, if so, performs the necessary wait. Then, make it so that all points in the memory manager that handle making pages writable use the helper function. This should provide stable page write support to most filesystems, while eliminating unnecessary waiting for devices that don't require the feature. Before this patchset, all filesystems would block, regardless of whether or not it was necessary. ext3 would wait, but still generate occasional checksum errors. The network filesystems were left to do their own thing, so they'd wait too. After this patchset, all the disk filesystems except ext3 and btrfs will wait only if the hardware requires it. ext3 (if necessary) snapshots pages instead of blocking, and btrfs provides its own bdi so the mm will never wait. Network filesystems haven't been touched, so either they provide their own stable page guarantees or they don't block at all. The blocking behavior is back to what it was before 3.0 if you don't have a disk requiring stable page writes. Here's the result of using dbench to test latency on ext2: 3.8.0-rc3: Operation Count AvgLat MaxLat ---------------------------------------- WriteX 109347 0.028 59.817 ReadX 347180 0.004 3.391 Flush 15514 29.828 287.283 Throughput 57.429 MB/sec 4 clients 4 procs max_latency=287.290 ms 3.8.0-rc3 + patches: WriteX 105556 0.029 4.273 ReadX 335004 0.005 4.112 Flush 14982 30.540 298.634 Throughput 55.4496 MB/sec 4 clients 4 procs max_latency=298.650 ms As you can see, the maximum write latency drops considerably with this patch enabled. The other filesystems (ext3/ext4/xfs/btrfs) behave similarly, but see the cover letter for those results. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | sched/rt: Move rt specific bits into new header fileClark Williams2013-02-071-0/+1
|/ | | | | | | | | | | Move rt scheduler definitions out of include/linux/sched.h into new file include/linux/sched/rt.h Signed-off-by: Clark Williams <williams@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20130207094707.7b9f825f@riff.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
* mm: fix calculation of dirtyable memorySonny Rao2012-12-201-5/+20
| | | | | | | | | | | | | | | | | | | | | | | | The system uses global_dirtyable_memory() to calculate number of dirtyable pages/pages that can be allocated to the page cache. A bug causes an underflow thus making the page count look like a big unsigned number. This in turn confuses the dirty writeback throttling to aggressively write back pages as they become dirty (usually 1 page at a time). This generally only affects systems with highmem because the underflowed count gets subtracted from the global count of dirtyable memory. The problem was introduced with v3.2-4896-gab8fabd Fix is to ensure we don't get an underflowed total of either highmem or global dirtyable memory. Signed-off-by: Sonny Rao <sonnyrao@chromium.org> Signed-off-by: Puneet Kumar <puneetster@chromium.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Tested-by: Damien Wyart <damien.wyart@free.fr> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* writeback: remove nr_pages_dirtied arg from balance_dirty_pages_ratelimited_nr()Namjae Jeon2012-12-111-6/+5
| | | | | | | | | | | | There is no reason to pass the nr_pages_dirtied argument, because nr_pages_dirtied value from the caller is unused in balance_dirty_pages_ratelimited_nr(). Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Vivek Trivedi <vtrivedi018@gmail.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* CPU hotplug, writeback: Don't call writeback_set_ratelimit() too often ↵Srivatsa S. Bhat2012-09-281-3/+11
| | | | | | | | | | | | | during hotplug The CPU hotplug callback related to writeback calls writeback_set_ratelimit() during every state change in the hotplug sequence. This is unnecessary since num_online_cpus() changes only once during the entire hotplug operation. So invoke the function only once per hotplug, thereby avoiding the unnecessary repetition of those costly calculations. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
* vfs: kill write_super and sync_supersArtem Bityutskiy2012-08-041-1/+0
| | | | | | | | | | | | | | | | | | | | | | | Finally we can kill the 'sync_supers' kernel thread along with the '->write_super()' superblock operation because all the users are gone. Now every file-system is supposed to self-manage own superblock and its dirty state. The nice thing about killing this thread is that it improves power management. Indeed, 'sync_supers' is a source of monotonic system wake-ups - it woke up every 5 seconds no matter what - even if there were no dirty superblocks and even if there were no file-systems using this service (e.g., btrfs and journalled ext4 do not need it). So it was wasting power most of the time. And because the thread was in the core of the kernel, all systems had to have it. So I am quite happy to make it go away. Interestingly, this thread is a left-over from the pdflush kernel thread which was a self-forking kernel thread responsible for all the write-back in old Linux kernels. It was turned into per-block device BDI threads, and 'sync_supers' was a left-over. Thus, R.I.P, pdflush as well. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* writeback: Fix some comment errorsWanpeng Li2012-06-091-2/+2
| | | | | Signed-off-by: Wanpeng Li <liwp@linux.vnet.ibm.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
* block: Convert BDI proportion calculations to flexible proportionsJan Kara2012-06-091-39/+64
| | | | | | | | | | | Convert calculations of proportion of writeback each bdi does to new flexible proportion code. That allows us to use aging period of fixed wallclock time which gives better proportion estimates given the hugely varying throughput of different devices. Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
* writeback: initialize global_dirty_limitFengguang Wu2012-05-061-0/+1
| | | | | | | | | | | This prevents global_dirty_limit from remaining 0 (the initial value) for long time, since it's only updated in update_dirty_limit() when above the dirty freerun area. It will avoid unexpected consequences when some random code use it as a convenient approximation of the global dirty threshold. Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
* mm: page-writeback.c: local functions should not be exposed globallyH Hartley Sweeten2012-04-141-1/+1
| | | | | | | | | | | | The function global_dirtyable_memory is only referenced in this file and should be marked static to prevent it from being exposed globally. This quiets the sparse warning: warning: symbol 'global_dirtyable_memory' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
* Merge tag 'ext4_for_linus' of ↵Linus Torvalds2012-03-281-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates for 3.4 from Ted Ts'o: "Ext4 commits for 3.3 merge window; mostly cleanups and bug fixes The changes to export dirty_writeback_interval are from Artem's s_dirt cleanup patch series. The same is true of the change to remove the s_dirt helper functions which never got used by anyone in-tree. I've run these changes by Al Viro, and am carrying them so that Artem can more easily fix up the rest of the file systems during the next merge window. (Originally we had hopped to remove the use of s_dirt from ext4 during this merge window, but his patches had some bugs, so I ultimately ended dropping them from the ext4 tree.)" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (66 commits) vfs: remove unused superblock helpers mm: export dirty_writeback_interval ext4: remove useless s_dirt assignment ext4: write superblock only once on unmount ext4: do not mark superblock as dirty unnecessarily ext4: correct ext4_punch_hole return codes ext4: remove restrictive checks for EOFBLOCKS_FL ext4: always set then trimmed blocks count into len ext4: fix trimmed block count accunting ext4: fix start and len arguments handling in ext4_trim_fs() ext4: update s_free_{inodes,blocks}_count during online resize ext4: change some printk() calls to use ext4_msg() instead ext4: avoid output message interleaving in ext4_error_<foo>() ext4: remove trailing newlines from ext4_msg() and ext4_error() messages ext4: add no_printk argument validation, fix fallout ext4: remove redundant "EXT4-fs: " from uses of ext4_msg ext4: give more helpful error message in ext4_ext_rm_leaf() ext4: remove unused code from ext4_ext_map_blocks() ext4: rewrite punch hole to use ext4_ext_remove_space() jbd2: cleanup journal tail after transaction commit ...
| * mm: export dirty_writeback_intervalArtem Bityutskiy2012-03-211-0/+2
| | | | | | | | | | | | | | | | | | | | Export 'dirty_writeback_interval' to make it visible to file-systems. We are going to push superblock management down to file-systems and get rid of the 'sync_supers' kernel thread completly. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* | mm: use global_dirty_limit in throttle_vm_writeout()Fengguang Wu2012-03-211-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When starting a memory hog task, a desktop box w/o swap is found to go unresponsive for a long time. It's solely caused by lots of congestion waits in throttle_vm_writeout(): gnome-system-mo-4201 553.073384: congestion_wait: throttle_vm_writeout+0x70/0x7f shrink_mem_cgroup_zone+0x48f/0x4a1 gnome-system-mo-4201 553.073386: writeback_congestion_wait: usec_timeout=100000 usec_delayed=100000 gtali-4237 553.080377: congestion_wait: throttle_vm_writeout+0x70/0x7f shrink_mem_cgroup_zone+0x48f/0x4a1 gtali-4237 553.080378: writeback_congestion_wait: usec_timeout=100000 usec_delayed=100000 Xorg-3483 553.103375: congestion_wait: throttle_vm_writeout+0x70/0x7f shrink_mem_cgroup_zone+0x48f/0x4a1 Xorg-3483 553.103377: writeback_congestion_wait: usec_timeout=100000 usec_delayed=100000 The root cause is, the dirty threshold is knocked down a lot by the memory hog task. Fixed by using global_dirty_limit which decreases gradually on such events and can guarantee we stay above (the also decreasing) nr_dirty in the progress of following down to the new dirty threshold. Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jan Kara <jack@suse.cz> Cc: Greg Thelen <gthelen@google.com> Cc: Ying Han <yinghan@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'writeback-for-linus' of ↵Linus Torvalds2012-01-101-55/+191
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux * 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: move MIN_WRITEBACK_PAGES to fs-writeback.c writeback: balanced_rate cannot exceed write bandwidth writeback: do strict bdi dirty_exceeded writeback: avoid tiny dirty poll intervals writeback: max, min and target dirty pause time writeback: dirty ratelimit - think time compensation btrfs: fix dirtied pages accounting on sub-page writes writeback: fix dirtied pages accounting on redirty writeback: fix dirtied pages accounting on sub-page writes writeback: charge leaked page dirties to active tasks writeback: Include all dirty inodes in background writeback
| * writeback: balanced_rate cannot exceed write bandwidthWu Fengguang2011-12-181-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add an upper limit to balanced_rate according to the below inequality. This filters out some rare but huge singular points, which at least enables more readable gnuplot figures. When there are N dd dirtiers, balanced_dirty_ratelimit = write_bw / N So it holds that balanced_dirty_ratelimit <= write_bw The singular points originate from dirty_rate in the below formular: balanced_dirty_ratelimit = task_ratelimit * write_bw / dirty_rate where dirty_rate = (number of page dirties in the past 200ms) / 200ms In the extreme case, if all dd tasks suddenly get blocked on something else and hence no pages are dirtied at all, dirty_rate will be 0 and balanced_dirty_ratelimit will be inf. This could happen in reality. Note that these huge singular points are not a real threat, since they are _guaranteed_ to be filtered out by the min(balanced_dirty_ratelimit, task_ratelimit) line in bdi_update_dirty_ratelimit(). task_ratelimit is based on the number of dirty pages, which will never _suddenly_ fly away like balanced_dirty_ratelimit. So any weirdly large balanced_dirty_ratelimit will be cut down to the level of task_ratelimit. There won't be tiny singular points though, as long as the dirty pages lie inside the dirty throttling region (above the freerun region). Because there the dd tasks will be throttled by balanced_dirty_pages() and won't be able to suddenly dirty much more pages than average. Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
| * writeback: do strict bdi dirty_exceededWu Fengguang2011-12-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | This helps to reduce dirty throttling polls and hence CPU overheads. bdi->dirty_exceeded typically only helps when suddenly starting 100+ dd's on a disk, in which case the dd's may need to poll balance_dirty_pages() earlier than tsk->nr_dirtied_pause. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
| * writeback: avoid tiny dirty poll intervalsWu Fengguang2011-12-181-1/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LKP tests see big 56% regression for the case fio_mmap_randwrite_64k. Shaohua manages to root cause it to be the much smaller dirty pause times and hence much more frequent invocations to the IO-less balance_dirty_pages(). Since fio_mmap_randwrite_64k effectively contains both reads and writes, the more frequent pauses triggered more idling in the cfq IO scheduler. The solution is to increase pause time all the way up to the max 200ms in this case, which is found to restore most performance. This will help reduce CPU overheads in other cases, too. Note that I don't expect many performance critical workloads to run this access pattern: the mmap read-on-write is rather inefficient and could be avoided by doing normal writes syscalls. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Reported-by: Li Shaohua <shaohua.li@intel.com> Tested-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
| * writeback: max, min and target dirty pause timeWu Fengguang2011-12-181-44/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Control the pause time and the call intervals to balance_dirty_pages() with three parameters: 1) max_pause, limited by bdi_dirty and MAX_PAUSE 2) the target pause time, grows with the number of dd tasks and is normally limited by max_pause/2 3) the minimal pause, set to half the target pause and is used to skip short sleeps and accumulate them into bigger ones The typical behaviors after patch: - if ever task_ratelimit is far below dirty_ratelimit, the pause time will remain constant at max_pause and nr_dirtied_pause will be fluctuating with task_ratelimit - in the normal cases, nr_dirtied_pause will remain stable (keep in the same pace with dirty_ratelimit) and the pause time will be fluctuating with task_ratelimit In summary, someone has to fluctuate with task_ratelimit, because task_ratelimit = nr_dirtied_pause / pause We normally prefer a stable nr_dirtied_pause, until reaching max_pause. The notable behavior changes are: - in stable workloads, there will no longer be sudden big trajectory switching of nr_dirtied_pause as concerned by Peter. It will be as smooth as dirty_ratelimit and changing proportionally with it (as always, assuming bdi bandwidth does not fluctuate across 2^N lines, otherwise nr_dirtied_pause will show up in 2+ parallel trajectories) - in the rare cases when something keeps task_ratelimit far below dirty_ratelimit, the smoothness can no longer be retained and nr_dirtied_pause will be "dancing" with task_ratelimit. This fixes a (not that destructive but still not good) bug that dirty_ratelimit gets brought down undesirably <= balanced_dirty_ratelimit is under estimated <= weakly executed task_ratelimit <= pause goes too large and gets trimmed down to max_pause <= nr_dirtied_pause (based on dirty_ratelimit) is set too large <= dirty_ratelimit being much larger than task_ratelimit - introduce min_pause to avoid small pause sleeps - when pause is trimmed down to max_pause, try to compensate it at the next pause time The "refactor" type of changes are: The max_pause equation is slightly transformed to make it slightly more efficient. We now scale target_pause by (N * 10ms) on 2^N concurrent tasks, which is effectively equal to the original scaling max_pause by (N * 20ms) because the original code does implicit target_pause ~= max_pause / 2. Based on the same implicit ratio, target_pause starts with 10ms on 1 dd. CC: Jan Kara <jack@suse.cz> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
| * writeback: dirty ratelimit - think time compensationWu Fengguang2011-12-181-4/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Compensate the task's think time when computing the final pause time, so that ->dirty_ratelimit can be executed accurately. think time := time spend outside of balance_dirty_pages() In the rare case that the task slept longer than the 200ms period time (result in negative pause time), the sleep time will be compensated in the following periods, too, if it's less than 1 second. Accumulated errors are carefully avoided as long as the max pause area is not hitted. Pseudo code: period = pages_dirtied / task_ratelimit; think = jiffies - dirty_paused_when; pause = period - think; 1) normal case: period > think pause = period - think dirty_paused_when = jiffies + pause nr_dirtied = 0 period time |===============================>| think time pause time |===============>|==============>| ------|----------------|---------------|------------------------ dirty_paused_when jiffies 2) no pause case: period <= think don't pause; reduce future pause time by: dirty_paused_when += period nr_dirtied = 0 period time |===============================>| think time |===================================================>| ------|--------------------------------+-------------------|---- dirty_paused_when jiffies Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
| * writeback: fix dirtied pages accounting on redirtyWu Fengguang2011-12-181-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | De-account the accumulative dirty counters on page redirty. Page redirties (very common in ext4) will introduce mismatch between counters (a) and (b) a) NR_DIRTIED, BDI_DIRTIED, tsk->nr_dirtied b) NR_WRITTEN, BDI_WRITTEN This will introduce systematic errors in balanced_rate and result in dirty page position errors (ie. the dirty pages are no longer balanced around the global/bdi setpoints). Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
| * writeback: fix dirtied pages accounting on sub-page writesWu Fengguang2011-12-181-8/+5
| | | | | | | | | | | | | | | | | | | | | | | | When dd in 512bytes, generic_perform_write() calls balance_dirty_pages_ratelimited() 8 times for the same page, but obviously the page is only dirtied once. Fix it by accounting tsk->nr_dirtied and bdp_ratelimits at page dirty time. Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
| * writeback: charge leaked page dirties to active tasksWu Fengguang2011-12-181-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's a years long problem that a large number of short-lived dirtiers (eg. gcc instances in a fast kernel build) may starve long-run dirtiers (eg. dd) as well as pushing the dirty pages to the global hard limit. The solution is to charge the pages dirtied by the exited gcc to the other random dirtying tasks. It sounds not perfect, however should behave good enough in practice, seeing as that throttled tasks aren't actually running so those that are running are more likely to pick it up and get throttled, therefore promoting an equal spread. Randy: fix compile error: 'dirty_throttle_leaks' undeclared in exit.c Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
* | mm: try to distribute dirty pages fairly across zonesJohannes Weiner2012-01-101-0/+82
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The maximum number of dirty pages that exist in the system at any time is determined by a number of pages considered dirtyable and a user-configured percentage of those, or an absolute number in bytes. This number of dirtyable pages is the sum of memory provided by all the zones in the system minus their lowmem reserves and high watermarks, so that the system can retain a healthy number of free pages without having to reclaim dirty pages. But there is a flaw in that we have a zoned page allocator which does not care about the global state but rather the state of individual memory zones. And right now there is nothing that prevents one zone from filling up with dirty pages while other zones are spared, which frequently leads to situations where kswapd, in order to restore the watermark of free pages, does indeed have to write pages from that zone's LRU list. This can interfere so badly with IO from the flusher threads that major filesystems (btrfs, xfs, ext4) mostly ignore write requests from reclaim already, taking away the VM's only possibility to keep such a zone balanced, aside from hoping the flushers will soon clean pages from that zone. Enter per-zone dirty limits. They are to a zone's dirtyable memory what the global limit is to the global amount of dirtyable memory, and try to make sure that no single zone receives more than its fair share of the globally allowed dirty pages in the first place. As the number of pages considered dirtyable excludes the zones' lowmem reserves and high watermarks, the maximum number of dirty pages in a zone is such that the zone can always be balanced without requiring page cleaning. As this is a placement decision in the page allocator and pages are dirtied only after the allocation, this patch allows allocators to pass __GFP_WRITE when they know in advance that the page will be written to and become dirty soon. The page allocator will then attempt to allocate from the first zone of the zonelist - which on NUMA is determined by the task's NUMA memory policy - that has not exceeded its dirty limit. At first glance, it would appear that the diversion to lower zones can increase pressure on them, but this is not the case. With a full high zone, allocations will be diverted to lower zones eventually, so it is more of a shift in timing of the lower zone allocations. Workloads that previously could fit their dirty pages completely in the higher zone may be forced to allocate from lower zones, but the amount of pages that "spill over" are limited themselves by the lower zones' dirty constraints, and thus unlikely to become a problem. For now, the problem of unfair dirty page distribution remains for NUMA configurations where the zones allowed for allocation are in sum not big enough to trigger the global dirty limits, wake up the flusher threads and remedy the situation. Because of this, an allocation that could not succeed on any of the considered zones is allowed to ignore the dirty limits before going into direct reclaim or even failing the allocation, until a future patch changes the global dirty throttling and flusher thread activation so that they take individual zone states into account. Test results 15M DMA + 3246M DMA32 + 504 Normal = 3765M memory 40% dirty ratio 16G USB thumb drive 10 runs of dd if=/dev/zero of=disk/zeroes bs=32k count=$((10 << 15)) seconds nr_vmscan_write (stddev) min| median| max xfs vanilla: 549.747( 3.492) 0.000| 0.000| 0.000 patched: 550.996( 3.802) 0.000| 0.000| 0.000 fuse-ntfs vanilla: 1183.094(53.178) 54349.000| 59341.000| 65163.000 patched: 558.049(17.914) 0.000| 0.000| 43.000 btrfs vanilla: 573.679(14.015) 156657.000| 460178.000| 606926.000 patched: 563.365(11.368) 0.000| 0.000| 1362.000 ext4 vanilla: 561.197(15.782) 0.000|2725438.000|4143837.000 patched: 568.806(17.496) 0.000| 0.000| 0.000 Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Tested-by: Wu Fengguang <fengguang.wu@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | mm: writeback: cleanups in preparation for per-zone dirty limitsJohannes Weiner2012-01-101-46/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The next patch will introduce per-zone dirty limiting functions in addition to the traditional global dirty limiting. Rename determine_dirtyable_memory() to global_dirtyable_memory() before adding the zone-specific version, and fix up its documentation. Also, move the functions to determine the dirtyable memory and the function to calculate the dirty limit based on that together so that their relationship is more apparent and that they can be commented on as a group. Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mel@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | mm: exclude reserved pages from dirtyable memoryJohannes Weiner2012-01-101-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Per-zone dirty limits try to distribute page cache pages allocated for writing across zones in proportion to the individual zone sizes, to reduce the likelihood of reclaim having to write back individual pages from the LRU lists in order to make progress. This patch: The amount of dirtyable pages should not include the full number of free pages: there is a number of reserved pages that the page allocator and kswapd always try to keep free. The closer (reclaimable pages - dirty pages) is to the number of reserved pages, the more likely it becomes for reclaim to run into dirty pages: +----------+ --- | anon | | +----------+ | | | | | | -- dirty limit new -- flusher new | file | | | | | | | | | -- dirty limit old -- flusher old | | | +----------+ --- reclaim | reserved | +----------+ | kernel | +----------+ This patch introduces a per-zone dirty reserve that takes both the lowmem reserve as well as the high watermark of the zone into account, and a global sum of those per-zone values that is subtracted from the global amount of dirtyable pages. The lowmem reserve is unavailable to page cache allocations and kswapd tries to keep the high watermark free. We don't want to end up in a situation where reclaim has to clean pages in order to balance zones. Not treating reserved pages as dirtyable on a global level is only a conceptual fix. In reality, dirty pages are not distributed equally across zones and reclaim runs into dirty pages on a regular basis. But it is important to get this right before tackling the problem on a per-zone level, where the distance between reclaim and the dirty pages is mostly much smaller in absolute numbers. [akpm@linux-foundation.org: fix highmem build] Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | mm/page-writeback.c: make determine_dirtyable_memory static againJohannes Weiner2012-01-101-62/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The tracing ring-buffer used this function briefly, but not anymore. Make it local to the writeback code again. Also, move the function so that no forward declaration needs to be reintroduced. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | fs: move code out of buffer.cAl Viro2012-01-031-1/+1
|/ | | | | | | | | | | | | | | Move invalidate_bdev, block_sync_page into fs/block_dev.c. Export kill_bdev as well, so brd doesn't have to open code it. Reduce buffer_head.h requirement accordingly. Removed a rather large comment from invalidate_bdev, as it looked a bit obsolete to bother moving. The small comment replacing it says enough. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* writeback: set max_pause to lowest value on zero bdi_dirtyWu Fengguang2011-12-081-2/+1
| | | | | | | | | | Some trace shows lots of bdi_dirty=0 lines where it's actually some small value if w/o the accounting errors in the per-cpu bdi stats. In this case the max pause time should really be set to the smallest (non-zero) value to avoid IO queue underrun and improve throughput. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
* writeback: permit through good bdi even when global dirty exceededWu Fengguang2011-12-081-0/+13
| | | | | | | | | | | | | | | | | | | | On a system with 1 local mount and 1 NFS mount, if the NFS server becomes not responding when dd to the NFS mount, the NFS dirty pages may exceed the global dirty limit and _every_ task involving writing will be blocked. The whole system appears unresponsive. The workaround is to permit through the bdi's that only has a small number of dirty pages. The number chosen (bdi_stat_error pages) is not enough to enable the local disk to run in optimal throughput, however is enough to make the system responsive on a broken NFS mount. The user can then kill the dirtiers on the NFS mount and increase the global dirty limit to bring up the local disk's throughput. It risks allowing dirty pages to grow much larger than the global dirty limit when there are 1000+ mounts, however that's very unlikely to happen, especially in low memory profiles. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
* writeback: comment on the bdi dirty thresholdWu Fengguang2011-12-081-2/+14
| | | | | | | | | | | | | | | | | | | | | | | We do "floating proportions" to let active devices to grow its target share of dirty pages and stalled/inactive devices to decrease its target share over time. It works well except in the case of "an inactive disk suddenly goes busy", where the initial target share may be too small. To mitigate this, bdi_position_ratio() has the below line to raise a small bdi_thresh when it's safe to do so, so that the disk be feed with enough dirty pages for efficient IO and in turn fast rampup of bdi_thresh: bdi_thresh = max(bdi_thresh, (limit - dirty) / 8); balance_dirty_pages() normally does negative feedback control which adjusts ratelimit to balance the bdi dirty pages around the target. In some extreme cases when that is not enough, it will have to block the tasks completely until the bdi dirty pages drop below bdi_thresh. Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
* writeback: remove vm_dirties and task->dirtiesWu Fengguang2011-11-171-9/+0
| | | | | | They are not used any more. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
* writeback: hard throttle 1000+ dd on a slow USB stickWu Fengguang2011-11-171-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sleep based balance_dirty_pages() can pause at most MAX_PAUSE=200ms on every 1 4KB-page, which means it cannot throttle a task under 4KB/200ms=20KB/s. So when there are more than 512 dd writing to a 10MB/s USB stick, its bdi dirty pages could grow out of control. Even if we can increase MAX_PAUSE, the minimal (task_ratelimit = 1) means a limit of 4KB/s. They can eventually be safeguarded by the global limit check (nr_dirty < dirty_thresh). However if someone is also writing to an HDD at the same time, it'll get poor HDD write performance. We at least want to maintain good write performance for other devices when one device is attacked by some "massive parallel" workload, or suffers from slow write bandwidth, or somehow get stalled due to some error condition (eg. NFS server not responding). For a stalled device, we need to completely block its dirtiers, too, before its bdi dirty pages grow all the way up to the global limit and leave no space for the other functional devices. So change the loop exit condition to /* * Always enforce global dirty limit; also enforce bdi dirty limit * if the normal max_pause sleeps cannot keep things under control. */ if (nr_dirty < dirty_thresh && (bdi_dirty < bdi_thresh || bdi->dirty_ratelimit > 1)) break; which can be further simplified to if (task_ratelimit) break; Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
* mm: Make task in balance_dirty_pages() killableJan Kara2011-11-161-1/+4
| | | | | | | | | | | | | | | | | | There is no reason why task in balance_dirty_pages() shouldn't be killable and it helps in recovering from some error conditions (like when filesystem goes in error state and cannot accept writeback anymore but we still want to kill processes using it to be able to unmount it). There will be follow up patches to further abort the generic_perform_write() and other filesystem write loops, to avoid large write + SIGKILL combination exceeding the dirty limit and possibly strange OOM. Reported-by: Kazuya Mio <k-mio@sx.jp.nec.com> Tested-by: Kazuya Mio <k-mio@sx.jp.nec.com> Reviewed-by: Neil Brown <neilb@suse.de> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
* writeback: fix uninitialized task_ratelimitWu Fengguang2011-11-071-4/+4
| | | | | | | | | | | In balance_dirty_pages() task_ratelimit may be not initialized (initialization skiped by goto pause), and then used when calling tracing hook. Fix it by moving the task_ratelimit assignment before goto pause. Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
* Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds2011-11-061-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
| * mm: Map most files to use export.h instead of module.hPaul Gortmaker2011-10-311-1/+1
| | | | | | | | | | | | | | | | The files changed within are only using the EXPORT_SYMBOL macro variants. They are not using core modular infrastructure and hence don't need module.h but only the export.h header. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* | Merge branch 'writeback-for-linus' of ↵Linus Torvalds2011-11-061-152/+552
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux * 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: Add a 'reason' to wb_writeback_work writeback: send work item to queue_io, move_expired_inodes writeback: trace event balance_dirty_pages writeback: trace event bdi_dirty_ratelimit writeback: fix ppc compile warnings on do_div(long long, unsigned long) writeback: per-bdi background threshold writeback: dirty position control - bdi reserve area writeback: control dirty pause time writeback: limit max dirty pause time writeback: IO-less balance_dirty_pages() writeback: per task dirty rate limit writeback: stabilize bdi->dirty_ratelimit writeback: dirty rate control writeback: add bg_threshold parameter to __bdi_update_bandwidth() writeback: dirty position control writeback: account per-bdi accumulated dirtied pages
| * | writeback: Add a 'reason' to wb_writeback_workCurt Wohlgemuth2011-10-311-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This creates a new 'reason' field in a wb_writeback_work structure, which unambiguously identifies who initiates writeback activity. A 'wb_reason' enumeration has been added to writeback.h, to enumerate the possible reasons. The 'writeback_work_class' and tracepoint event class and 'writeback_queue_io' tracepoints are updated to include the symbolic 'reason' in all trace events. And the 'writeback_inodes_sbXXX' family of routines has had a wb_stats parameter added to them, so callers can specify why writeback is being started. Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Curt Wohlgemuth <curtw@google.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
OpenPOWER on IntegriCloud