summaryrefslogtreecommitdiffstats
path: root/kernel/power
Commit message (Collapse)AuthorAgeFilesLines
* PM: Split up sysdev_[suspend|resume] from device_power_[down|up]Rafael J. Wysocki2009-02-222-2/+17
| | | | | | | | | | | Move the sysdev_suspend/resume from the callee to the callers, with no real change in semantics, so that we can rework the disabling of interrupts during suspend/hibernation. This is based on an earlier patch from Linus. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'hibernate'Linus Torvalds2009-02-213-4/+21
|\ | | | | | | | | | | | | | | | | | | | | | | | | * hibernate: PM: Fix suspend_console and resume_console to use only one semaphore PM: Wait for console in resume PM: Fix pm_notifiers during user mode hibernation swsusp: clean up shrink_all_zones() swsusp: dont fiddle with swappiness PM: fix build for CONFIG_PM unset PM/hibernate: fix "swap breaks after hibernation failures" PM/resume: wait for device probing to finish Consolidate driver_probe_done() loops into one place
| * PM: Wait for console in resumeArve Hjønnevåg2009-02-211-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | Avoids later waking up to a blinking cursor if the device woke up and returned to sleep before the console switch happened. Signed-off-by: Brian Swetland <swetland@google.com> Signed-off-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * PM: Fix pm_notifiers during user mode hibernationAndrey Borzenkov2009-02-211-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Snapshot device is opened with O_RDONLY during suspend and O_WRONLY durig resume. Make sure we also call notifiers with correct parameter telling them what we are really doing. Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <gregkh@suse.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * PM: fix build for CONFIG_PM unsetRafael J. Wysocki2009-02-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Compilation of kprobes.c with CONFIG_PM unset is broken due to some broken config dependncies. Fix that. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <gregkh@suse.de> Reported-by: Ingo Molnar <mingo@elte.hu> Tested-by: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * PM/resume: wait for device probing to finishArjan van de Ven2009-02-211-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | the resume code does not currently wait for device probing to finish. Even without async function calls this is dicey and not correct, but with async function calls during the boot sequence this is going to get hit more... This patch adds the synchronization using the newly introduced helper. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Acked-by: Greg KH <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2009-02-181-2/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: fix deadlock in blk_abort_queue() for drivers that readd to timeout list block: fix booting from partitioned md array block: revert part of 18ce3751ccd488c78d3827e9f6bf54e6322676fb cciss: PCI power management reset for kexec paride/pg.c: xs(): &&/|| confusion fs/bio: bio_alloc_bioset: pass right object ptr to mempool_free block: fix bad definition of BIO_RW_SYNC bsg: Fix sense buffer bug in SG_IO
| * | block: fix bad definition of BIO_RW_SYNCJens Axboe2009-02-181-2/+3
| |/ | | | | | | | | | | | | | | We can't OR shift values, so get rid of BIO_RW_SYNC and use BIO_RW_SYNCIO and BIO_RW_UNPLUG explicitly. This brings back the behaviour from before 213d9417fec62ef4c3675621b9364a667954d4dd. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | pm: fix build for CONFIG_PM unsetRafael J. Wysocki2009-02-181-1/+1
|/ | | | | | | | | | | | | Compilation of kprobes.c with CONFIG_PM unset is broken due to some broken config dependncies. Fix that. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Ingo Molnar <mingo@elte.hu> Tested-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Len Brown <lenb@kernel.org> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
*-. Merge branches 'release', 'asus', 'bugzilla-12450', 'cpuidle', 'debug', ↵Len Brown2009-02-072-13/+23
|\ \ | | | | | | | | | 'ec', 'misc', 'printk' and 'processor' into release
| | * PM: Fix compilation warning in kernel/power/main.cRafael J. Wysocki2009-01-161-13/+13
| |/ |/| | | | | | | | | | | | | Reorder the code in kernel/power/main.c to fix compilation warning triggered by unsetting CONFIG_SUSPEND. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
| * Hibernation: Introduce system_entering_hibernationRafael J. Wysocki2009-01-271-0/+10
|/ | | | | | | | | | | | | | | | Introduce boolean function system_entering_hibernation() returning 'true' during the last phase of hibernation, in which devices are being put into low power states and the sleep state (for example, ACPI S4) is finally entered. Some device drivers need such a function to check if the system is in the final phase of hibernation. In particular, some SATA drivers are going to use it for blacklisting systems in which the disks should not be spun down during the last phase of hibernation (the BIOS will do that anyway). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* PM: Fix freezer compilation if PM_SLEEP is unsetRafael J. Wysocki2009-01-161-1/+2
| | | | | | | | | | | | | | | | | | | Freezer fails to compile if with the following configuration settings: CONFIG_CGROUPS=y CONFIG_CGROUP_FREEZER=y CONFIG_MODULES=y CONFIG_FREEZER=y CONFIG_PM=y CONFIG_PM_SLEEP=n Fix this by making process.o compilation depend on CONFIG_FREEZER. Reported-by: Cheng Renquan <crquan@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
* Merge branch 'linus' into releaseLen Brown2009-01-093-18/+8
|\
| * pm: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers2009-01-061-3/+3
| | | | | | | | | | Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * cpumask: convert rest of files in kernel/Rusty Russell2009-01-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: Reduce stack usage, use new cpumask API. Mainly changing cpumask_t to 'struct cpumask' and similar simple API conversion. Two conversions worth mentioning: 1) we use cpumask_any_but to avoid a temporary in kernel/softlockup.c, 2) Use cpumask_var_t in taskstats_user_cmd(). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com>
| * Merge branches 'tracing/ftrace', 'tracing/ring-buffer' and 'tracing/urgent' ↵Ingo Molnar2008-12-191-1/+1
| |\ | | | | | | | | | | | | | | | | | | into tracing/core Conflicts: include/linux/ftrace.h
| * | tracing: allow tracing of suspend/resume & hibernation code againIngo Molnar2008-11-232-14/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: widen function-tracing to suspend+resume (and hibernation) sequences Now that the ftrace kernel thread is gone, we can allow tracing during suspend/resume again. So revert these two commits: f42ac38c5 "ftrace: disable tracing for suspend to ram" 41108eb10 "ftrace: disable tracing for hibernation" This should be tested very carefully, as it could interact with altneratives instruction patching, etc. Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | Hibernate: Replace unnecessary evaluation of pfn_to_page()Rafael J. Wysocki2008-12-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Replace one evaluation of pfn_to_page() in copy_data_pages() with the value of a local variable containing the right number already. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
* | | Hibernate: Take overlapping zones into account (rev. 2)Rafael J. Wysocki2008-12-191-159/+166
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It has been requested to make hibernation work with memory hotplugging enabled and for this purpose the hibernation code has to be reworked to take the possible overlapping of zones into account. Thus, rework the hibernation memory bitmaps code to prevent duplication of PFNs from occuring and add checks to make sure that one page frame will not be marked as saveable many times. Additionally, use list.h lists instead of open-coded lists to implement the memory bitmaps. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
* | | Hibernate: Do not oops on resume if image data are incorrectRafael J. Wysocki2008-12-191-11/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During resume from hibernation using the userland interface image data are being passed from the used space process to the kernel. These data need not be valid, but currently the kernel sometimes oopses if it gets invalid image data, which is wrong. Make the kernel return error codes to the user space in such cases. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
* | | ACPI hibernate: Add a mechanism to save/restore ACPI NVS memoryRafael J. Wysocki2008-12-191-0/+122
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the ACPI Specification 3.0b, Section 15.3.2, "OSPM will call the _PTS control method some time before entering a sleeping state, to allow the platform's AML code to update this memory image before entering the sleeping state. After the system awakes from an S4 state, OSPM will restore this memory area and call the _WAK control method to enable the BIOS to reclaim its memory image." For this reason, implement a mechanism allowing us to save the NVS memory during hibernation and to restore it during the subsequent resume. Based on a patch by Zhang Rui. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Nigel Cunningham <nigel@tuxonice.net> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | | Hibernate: Call platform_begin before swsusp_shrink_memoryZhang Rui2008-12-191-3/+3
| |/ |/| | | | | | | | | | | | | | | | | | | | | Call platform_begin() before swsusp_shrink_memory() so that we can always allocate enough memory to save the ACPI NVS region from platform_begin(). Signed-off-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Nigel Cunningham <nigel@tuxonice.net> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
* | [PATCH] kill obsolete temporary comment in swsusp_close()Al Viro2008-12-041-1/+1
|/ | | | | | | | it had been put there to mark the call of blkdev_put() that needed proper argument propagated to it; later patch in the same series had done just that. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* suspend: use WARN not WARN_ON to print the messageArjan van de Ven2008-11-181-1/+1
| | | | | | | | | | By using WARN(), kerneloops.org can collect which component is causing the delay and make statistics about that. suspend_test_finish() is currently the number 2 item but unless we can collect who's causing it we're not going to be able to fix the hot topic ones.. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PM_TEST_SUSPEND should depend on RTC_CLASS, not RTC_LIBAl Viro2008-11-011-1/+1
| | | | | | | | | Insufficient dependency - we really want CONFIG_RTC_CLASS=y there. That will give us CONFIG_RTC_LIB=y, so the old dependency can be simply replaced. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] sanitize blkdev_get() and friendsAl Viro2008-10-211-1/+1
| | | | | | | | * get rid of fake struct file/struct dentry in __blkdev_get() * merge __blkdev_get() and do_open() * get rid of flags argument of blkdev_get() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* [PATCH] propagate mode through swsusp_close()Al Viro2008-10-213-5/+5
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* [PATCH] pass fmode_t to blkdev_put()Al Viro2008-10-211-4/+4
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* container freezer: skip frozen cgroups during power management resumeMatt Helsley2008-10-201-0/+3
| | | | | | | | | | | | | | | | When a system is resumed after a suspend, it will also unfreeze frozen cgroups. This patchs modifies the resume sequence to skip the tasks which are part of a frozen control group. Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Matt Helsley <matthltc@us.ibm.com> Acked-by: Serge E. Hallyn <serue@us.ibm.com> Tested-by: Matt Helsley <matthltc@us.ibm.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* container freezer: implement freezer cgroup subsystemMatt Helsley2008-10-201-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements a new freezer subsystem in the control groups framework. It provides a way to stop and resume execution of all tasks in a cgroup by writing in the cgroup filesystem. The freezer subsystem in the container filesystem defines a file named freezer.state. Writing "FROZEN" to the state file will freeze all tasks in the cgroup. Subsequently writing "RUNNING" will unfreeze the tasks in the cgroup. Reading will return the current state. * Examples of usage : # mkdir /containers/freezer # mount -t cgroup -ofreezer freezer /containers # mkdir /containers/0 # echo $some_pid > /containers/0/tasks to get status of the freezer subsystem : # cat /containers/0/freezer.state RUNNING to freeze all tasks in the container : # echo FROZEN > /containers/0/freezer.state # cat /containers/0/freezer.state FREEZING # cat /containers/0/freezer.state FROZEN to unfreeze all tasks in the container : # echo RUNNING > /containers/0/freezer.state # cat /containers/0/freezer.state RUNNING This is the basic mechanism which should do the right thing for user space task in a simple scenario. It's important to note that freezing can be incomplete. In that case we return EBUSY. This means that some tasks in the cgroup are busy doing something that prevents us from completely freezing the cgroup at this time. After EBUSY, the cgroup will remain partially frozen -- reflected by freezer.state reporting "FREEZING" when read. The state will remain "FREEZING" until one of these things happens: 1) Userspace cancels the freezing operation by writing "RUNNING" to the freezer.state file 2) Userspace retries the freezing operation by writing "FROZEN" to the freezer.state file (writing "FREEZING" is not legal and returns EIO) 3) The tasks that blocked the cgroup from entering the "FROZEN" state disappear from the cgroup's set of tasks. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: export thaw_process] Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Matt Helsley <matthltc@us.ibm.com> Acked-by: Serge E. Hallyn <serue@us.ibm.com> Tested-by: Matt Helsley <matthltc@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* container freezer: make refrigerator always availableMatt Helsley2008-10-202-116/+3
| | | | | | | | | | | | | | | | | Now that the TIF_FREEZE flag is available in all architectures, extract the refrigerator() and freeze_task() from kernel/power/process.c and make it available to all. The refrigerator() can now be used in a control group subsystem implementing a control group freezer. Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Matt Helsley <matthltc@us.ibm.com> Acked-by: Serge E. Hallyn <serue@us.ibm.com> Tested-by: Matt Helsley <matthltc@us.ibm.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pm: rework disabling of user mode helpers during suspend/hibernationRafael J. Wysocki2008-10-163-1/+27
| | | | | | | | | | | | | | | | | | | | | We currently use a PM notifier to disable user mode helpers before suspend and hibernation and to re-enable them during resume. However, this is not an ideal solution, because if any drivers want to upload firmware into memory before suspend, they have to use a PM notifier for this purpose and there is no guarantee that the ordering of PM notifiers will be as expected (ie. the notifier that disables user mode helpers has to be run after the driver's notifier used for uploading the firmware). For this reason, it seems better to move the disabling and enabling of user mode helpers to separate functions that will be called by the PM core as necessary. [akpm@linux-foundation.org: remove unneeded ifdefs] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ftrace: disable tracing for hibernationRafael J. Wysocki2008-08-281-3/+10
| | | | | | | | | | In accordance with commit f42ac38c59e0a03d6da0c24a63fb211393f484b0 ("ftrace: disable tracing for suspend to ram"), disable tracing around the suspend code in hibernation code paths. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ftrace: disable tracing for suspend to ramSteven Rostedt2008-08-271-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I've been painstakingly debugging the issue with suspend to ram and ftraced. The 2.6.28 code does not have this issue, but since the mcount recording is not going to be in 27, this must be solved for the ftrace daemon version. The resume from suspend to ram would reboot because it was triple faulting. Debugging further, I found that calling the mcount function itself was not an issue, but it would fault when it incremented preempt_count. preempt_count is on the tasks info structure that is on the low memory address of the task's stack. For some reason, it could not write to it. Resuming out of suspend to ram does quite a lot of funny tricks to get to work, so it is not surprising at all that simply doing a preempt_disable() would cause a fault. Thanks to Rafael for suggesting to add a "while (1);" to find the place in resuming that is causing the fault. I would place the loop somewhere in the code, compile and reboot and see if it would either reboot (hit the fault) or simply hang (hit the loop). Doing this over and over again, I narrowed it down that it was happening in enable_nonboot_cpus. At this point, I found that it is easier to simply disable tracing around the suspend code, instead of searching for the particular function that can not handle doing a preempt_disable. This patch disables the tracer as it suspends and reenables it on resume. I tested this patch on my Laptop, and it can resume fine with the patch. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* removed unused #include <linux/version.h>'sAdrian Bunk2008-08-231-1/+0
| | | | | | | | This patch lets the files using linux/version.h match the files that #include it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* kexec jump: save/restore device stateHuang Ying2008-07-261-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements devices state save/restore before after kexec. This patch together with features in kexec_jump patch can be used for following: - A simple hibernation implementation without ACPI support. You can kexec a hibernating kernel, save the memory image of original system and shutdown the system. When resuming, you restore the memory image of original system via ordinary kexec load then jump back. - Kernel/system debug through making system snapshot. You can make system snapshot, jump back, do some thing and make another system snapshot. - Cooperative multi-kernel/system. With kexec jump, you can switch between several kernels/systems quickly without boot process except the first time. This appears like swap a whole kernel/system out/in. - A general method to call program in physical mode (paging turning off). This can be used to invoke BIOS code under Linux. The following user-space tools can be used with kexec jump: - kexec-tools needs to be patched to support kexec jump. The patches and the precompiled kexec can be download from the following URL: source: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-src_git_kh10.tar.bz2 patches: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-patches_git_kh10.tar.bz2 binary: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec_git_kh10 - makedumpfile with patches are used as memory image saving tool, it can exclude free pages from original kernel memory image file. The patches and the precompiled makedumpfile can be download from the following URL: source: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile-src_cvs_kh10.tar.bz2 patches: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile-patches_cvs_kh10.tar.bz2 binary: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile_cvs_kh10 - An initramfs image can be used as the root file system of kexeced kernel. An initramfs image built with "BuildRoot" can be downloaded from the following URL: initramfs image: http://khibernation.sourceforge.net/download/release_v10/initramfs/rootfs_cvs_kh10.gz All user space tools above are included in the initramfs image. Usage example of simple hibernation: 1. Compile and install patched kernel with following options selected: CONFIG_X86_32=y CONFIG_RELOCATABLE=y CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y CONFIG_PM=y CONFIG_HIBERNATION=y CONFIG_KEXEC_JUMP=y 2. Build an initramfs image contains kexec-tool and makedumpfile, or download the pre-built initramfs image, called rootfs.gz in following text. 3. Prepare a partition to save memory image of original kernel, called hibernating partition in following text. 4. Boot kernel compiled in step 1 (kernel A). 5. In the kernel A, load kernel compiled in step 1 (kernel B) with /sbin/kexec. The shell command line can be as follow: /sbin/kexec --load-preserve-context /boot/bzImage --mem-min=0x100000 --mem-max=0xffffff --initrd=rootfs.gz 6. Boot the kernel B with following shell command line: /sbin/kexec -e 7. The kernel B will boot as normal kexec. In kernel B the memory image of kernel A can be saved into hibernating partition as follow: jump_back_entry=`cat /proc/cmdline | tr ' ' '\n' | grep kexec_jump_back_entry | cut -d '='` echo $jump_back_entry > kexec_jump_back_entry cp /proc/vmcore dump.elf Then you can shutdown the machine as normal. 8. Boot kernel compiled in step 1 (kernel C). Use the rootfs.gz as root file system. 9. In kernel C, load the memory image of kernel A as follow: /sbin/kexec -l --args-none --entry=`cat kexec_jump_back_entry` dump.elf 10. Jump back to the kernel A as follow: /sbin/kexec -e Then, kernel A is resumed. Implementation point: To support jumping between two kernels, before jumping to (executing) the new kernel and jumping back to the original kernel, the devices are put into quiescent state, and the state of devices and CPU is saved. After jumping back from kexeced kernel and jumping to the new kernel, the state of devices and CPU are restored accordingly. The devices/CPU state save/restore code of software suspend is called to implement corresponding function. Known issues: - Because the segment number supported by sys_kexec_load is limited, hibernation image with many segments may not be load. This is planned to be eliminated by adding a new flag to sys_kexec_load to make a image can be loaded with multiple sys_kexec_load invoking. Now, only the i386 architecture is supported. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@nigel.suspend2.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pm selftest: rtc paranoiaDavid Brownell2008-07-261-0/+7
| | | | | | | | | | Cope with a quirk of some RTCs (notably ACPI ones) which aren't guaranteed to implement oneshot behavior when they woke the system from sleeep: forcibly disable the alarm, just in case. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pm: fix try_to_freeze_tasks()'s use of do_div()David Howells2008-07-241-1/+1
| | | | | | | | | | | | | | | | | Fix try_to_freeze_tasks()'s use of do_div() on an s64 by making elapsed_csecs64 a u64 instead and dividing that. Possibly this should be guarded lest the interval calculation turn up negative, but the possible negativity of the result of the division is cast away anyway. This was introduced by patch 438e2ce68dfd4af4cfcec2f873564fb921db4bb5. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pm: schedule sysrq poweroff on boot cpuZhang Rui2008-07-241-1/+3
| | | | | | | | | | | | | | | | schedule sysrq poweroff on boot cpu. sysrq poweroff needs to disable nonboot cpus, and we need to run this on boot cpu to avoid any recursion. http://bugzilla.kernel.org/show_bug.cgi?id=10897 [kosaki.motohiro@jp.fujitsu.com: build fix] Signed-off-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Rus <harbour@sfinx.od.ua> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pm: hibernation: simplify memory bitmapAkinobu Mita2008-07-241-67/+21
| | | | | | | | | | | | | | | | | | | This patch simplifies the memory bitmap manipulations. - remove the member size in struct bm_block It is not necessary for struct bm_block to have the number of bit chunks that can be calculated by using end_pfn and start_pfn. - use find_next_bit() for memory_bm_next_pfn No need to invent the bitmap library only for the memory bitmap. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pm: boot time suspend selftestDavid Brownell2008-07-242-1/+204
| | | | | | | | | | | | | | | | | | | | | | | | | | | Boot-time test for system suspend states (STR or standby). The generic RTC framework triggers wakeup alarms, which are used to exit those states. - Measures some aspects of suspend time ... this uses "jiffies" until someone converts it to use a timebase that works properly even while timer IRQs are disabled. - Triggered by a command line parameter. By default nothing even vaguely troublesome will happen, but "test_suspend=mem" will give you a brief STR test during system boot. (Or you may need to use "test_suspend=standby" instead, if your hardware needs that.) This isn't without problems. It fires early enough during boot that for example both PCMCIA and MMC stacks have misbehaved. The workaround in those cases was to boot without such media cards inserted. [matthltc@us.ibm.com: fix compile failure in boot time suspend selftest] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Pavel Machek <pavel@suse.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Matt Helsley <matthltc@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'linus' into xen-64bitIngo Molnar2008-07-174-99/+135
|\
| * Merge branch 'linux-next' of ↵Linus Torvalds2008-07-162-18/+48
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (72 commits) Revert "x86/PCI: ACPI based PCI gap calculation" PCI: remove unnecessary volatile in PCIe hotplug struct controller x86/PCI: ACPI based PCI gap calculation PCI: include linux/pm_wakeup.h for device_set_wakeup_capable PCI PM: Fix pci_prepare_to_sleep x86/PCI: Fix PCI config space for domains > 0 Fix acpi_pm_device_sleep_wake() by providing a stub for CONFIG_PM_SLEEP=n PCI: Simplify PCI device PM code PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleep PCI ACPI: Rework PCI handling of wake-up ACPI: Introduce new device wakeup flag 'prepared' ACPI: Introduce acpi_device_sleep_wake function PCI: rework pci_set_power_state function to call platform first PCI: Introduce platform_pci_power_manageable function ACPI: Introduce acpi_bus_power_manageable function PCI: make pci_name use dev_name PCI: handle pci_name() being const PCI: add stub for pci_set_consistent_dma_mask() PCI: remove unused arch pcibios_update_resource() functions PCI: fix pci_setup_device()'s sprinting into a const buffer ... Fixed up conflicts in various files (arch/x86/kernel/setup_64.c, arch/x86/pci/irq.c, arch/x86/pci/pci.h, drivers/acpi/sleep/main.c, drivers/pci/pci.c, drivers/pci/pci.h, include/acpi/acpi_bus.h) from x86 and ACPI updates manually.
| | * Suspend-related patches for 2.6.27Rafael J. Wysocki2008-06-122-9/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ACPI PM: Add possibility to change suspend sequence There are some systems out there that don't work correctly with our current suspend/hibernation code ordering. Provide a workaround for these systems allowing them to pass 'acpi_sleep=old_ordering' in the kernel command line so that it will use the pre-ACPI 2.0 ("old") suspend code ordering. Unfortunately, this requires us to add a platform hook to the resuming of devices for recovering the platform in case one of the device drivers' .suspend() routines returns error code. Namely, ACPI 1.0 specifies that _PTS should be called before suspending devices, but _WAK still should be called before resuming them in order to undo the changes made by _PTS. However, if there is an error during suspending devices, they are automatically resumed without returning control to the PM core, so the _WAK has to be called from within device_resume() in that cases. The patch also reorders and refactors the ACPI suspend/hibernation code to avoid duplication as far as reasonably possible. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| | * Introduce new top level suspend and hibernation callbacksRafael J. Wysocki2008-06-102-9/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce 'struct pm_ops' and 'struct pm_ext_ops' ('ext' meaning 'extended') representing suspend and hibernation operations for bus types, device classes, device types and device drivers. Modify the PM core to use 'struct pm_ops' and 'struct pm_ext_ops' objects, if defined, instead of the ->suspend(), ->resume(), ->suspend_late(), and ->resume_early() callbacks (the old callbacks will be considered as legacy and gradually phased out). The main purpose of doing this is to separate suspend (aka S2RAM and standby) callbacks from hibernation callbacks in such a way that the new callbacks won't take arguments and the semantics of each of them will be clearly specified. This has been requested for multiple times by many people, including Linus himself, and the reason is that within the current scheme if ->resume() is called, for example, it's difficult to say why it's been called (ie. is it a resume from RAM or from hibernation or a suspend/hibernation failure etc.?). The second purpose is to make the suspend/hibernation callbacks more flexible so that device drivers can handle more than they can within the current scheme. For example, some drivers may need to prevent new children of the device from being registered before their ->suspend() callbacks are executed or they may want to carry out some operations requiring the availability of some other devices, not directly bound via the parent-child relationship, in order to prepare for the execution of ->suspend(), etc. Ultimately, we'd like to stop using the freezing of tasks for suspend and therefore the drivers' suspend/hibernation code will have to take care of the handling of the user space during suspend/hibernation. That, in turn, would be difficult within the current scheme, without the new ->prepare() and ->complete() callbacks. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | snapshot: Use pm_mutex for mutual exclusionRafael J. Wysocki2008-07-161-26/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We can avoid taking the BKL in snapshot_ioctl() if pm_mutex is used to prevent the ioctls from being executed concurrently. In addition, although it is only possible to open /dev/snapshot once, the task which has done that may spawn a child that will inherit the open descriptor, so in theory they can call snapshot_write(), snapshot_read() and snapshot_release() concurrently. pm_mutex can also be used for mutual exclusion in such cases. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
| * | snapshot: Push BKL down into ioctl handlersAlan Cox2008-07-161-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | Push BKL down into ioctl handlers - snapshot device. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
| * | Freezer: Introduce PF_FREEZER_NOSIGRafael J. Wysocki2008-07-161-55/+42
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The freezer currently attempts to distinguish kernel threads from user space tasks by checking if their mm pointer is unset and it does not send fake signals to kernel threads. However, there are kernel threads, mostly related to networking, that behave like user space tasks and may want to be sent a fake signal to be frozen. Introduce the new process flag PF_FREEZER_NOSIG that will be set by default for all kernel threads and make the freezer only send fake signals to the tasks having PF_FREEZER_NOSIG unset. Provide the set_freezable_with_signal() function to be called by the kernel threads that want to be sent a fake signal for freezing. This patch should not change the freezer's observable behavior. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
* | x86, xen, power: fix up config dependencies on PMJeremy Fitzhardinge2008-07-171-1/+1
| | | | | | | | | | | | | | | | | | | | Xen save/restore needs bits of code enabled by PM_SLEEP, and PM_SLEEP depends on PM. So make XEN_SAVE_RESTORE depend on PM and PM_SLEEP depend on XEN_SAVE_RESTORE. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
OpenPOWER on IntegriCloud