summaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] x86_64: fix CONFIG_REORDERSam Ravnborg2006-04-091-1/+1
| | | | | | | | | | | | | | Fix CONFIG_REORDER. The value of cflags-y was assined to CFLAGS before cflags-y was assigned the value used for CONFIG_REORDER. Use cflags-y for all CFLAGS options in the Makefile to avoid this happening again. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: Fix drift with HPET timer enabledJordan Hargrave2006-04-093-0/+9
| | | | | | | | | | | | | | | | | | | | If the HPET timer is enabled, the clock can drift by ~3 seconds a day. This is due to the HPET timer not being initialized with the correct setting (still using PIT count). If HZ changes, this drift can become even more pronounced. HPET patch initializes tick_nsec with correct tick_nsec settings for HPET timer. Vojtech comments: "It's not entirely correct (it assumes the HPET ticks totally exactly), but it's significantly better than assuming the PIT error there." Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: Don't run NMI watchdog during machine checksAndi Kleen2006-04-091-0/+7
| | | | | | | | Machine checks can stall the machine for a long time and it's not good to trigger the nmi watchdog during that. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: extra NODES_SHIFT definitionDave Hansen2006-04-091-2/+0
| | | | | | | | | | | | | | | The generic linux/numa.h file defines NODES_SHIFT to 0 in case the architecture did not. Every architecture which has a NUMA config option defines NODES_SHIFT in its asm-$ARCH headers, but only if NUMA is enabled, except for x86_64. This should make it like all the rest. Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] i386: Consolidate modern APIC handlingAndi Kleen2006-04-091-0/+2
| | | | | | | | | | | | | | | | | | | | | | | AMD systems have a modern APIC that supports 8 bit IDs, but don't have a XAPIC version number. Add a new "modern_apic" subfunction that handles this correctly and use it (nearly) everywhere where XAPIC is tested for. I removed one wart: the code specified that external APICs would use an 8bit APIC ID. But I checked a real 82093 data sheet and it says clearly that they only use 4bit. So I removed this special case since it would a bit awkward to implement now. I removed the valid APIC tests in mptable parsing completely. On any modern system they only check against the full field width (8bit) anyways and are no-ops. This also fixes them doing the wrong thing on >8 core Opterons. This makes i386 boot again on 16 core Opterons. Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: Introduce e820_all_mappedArjan van de Ven2006-04-092-0/+5
| | | | | | | | | | | | | | Introduce a e820_all_mapped() function which checks if the entire range <start,end> is mapped with type. This is done by moving the local start variable to the end of each known-good region; if at the end of the function the start address is still before end, there must be a part that's not of the correct type; otherwise it's a good region. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: Rename e820_mapped to e820_any_mappedArjan van de Ven2006-04-091-1/+1
| | | | | | | | | | | | Rename e820_mapped to e820_any_mapped since it tests if any part of the range is mapped according to the type. Later steps will introduce e820_all_mapped which will check if the entire range is mapped with the type. Both have their merit. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: Handle empty PXMs that only contain hotplug memoryAndi Kleen2006-04-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | The node setup code would try to allocate the node metadata in the node itself, but that fails if there is no memory in there. This can happen with memory hotplug when the hotplug area defines an so far empty node. Now use bootmem to try to allocate the mem_map in other nodes. And if it fails don't panic, but just ignore the node. To make this work I added a new __alloc_bootmem_nopanic function that does what its name implies. TBD should try to use nearby nodes here. Currently we just use any. It's hard to do it better because bootmem doesn't have proper fallback lists yet. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: Reserve SRAT hotadd memory on x86-64Andi Kleen2006-04-091-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From: Keith Mannthey, Andi Kleen Implement memory hotadd without sparsemem. The memory in the SRAT hotadd area is just preserved instead and can be activated later. There are a few restrictions: - Only one continuous hotadd area allowed per node The main problem is dealing with the many buggy SRAT tables that are out there. The strategy here is to reject anything suspicious. Originally from Keith Mannthey, with several hacks and changes by AK and also contributions from Andrew Morton [ TBD: Problems pointed out by KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>: 1) Goto's rebuild_zonelist patch will not work if CONFIG_MEMORY_HOTPLUG=n. Rebuilding zonelist is necessary when the system has just memory < 4G at boot, and hot add memory > 4G. because x86_64 has DMA32, ZONE_NORAML is not included into zonelist at boot time if system doesn't have memory >4G at boot. [AK: should just force the higher zones at boot time when SRAT tells us] 2) zone and node's spanned_pages and present_pages are not incremented. They should be. For example, our server (ia64/Fujitsu PrimeQuest) can equip memory from 4G to 1T(maybe 2T in future), and SRAT will *always* say we have possible 1T +memory. (Microsoft requires "write all possible memory in SRAT") When we reserve memmap for possible 1T memory, Linux will not work well in +minimum 4G configuraion ;) [AK: needs limiting to 5-10% of max memory] ] Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: Support memory hotadd without sparsememAndi Kleen2006-04-092-8/+9
| | | | | | | | | | | Memory hotadd doesn't need SPARSEMEM, but can be handled by just preallocating mem_maps. This only needs some untangling of ifdefs to enable the necessary code even without SPARSEMEM. Originally from Keith Mannthey, hacked by AK. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Update dummy snd_power_wait() function for new calling conventionLinus Torvalds2006-04-021-1/+1
| | | | | | | Apparently nobody had tried to compile the ALSA CVS tree without power management enabled. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge branch 'splice' of git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds2006-04-021-1/+5
|\ | | | | | | | | | | | | | | | | | | | | * 'splice' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] splice: fix page stealing LRU handling. [PATCH] splice: page stealing needs to wait_on_page_writeback() [PATCH] splice: export generic_splice_sendpage [PATCH] splice: add a SPLICE_F_MORE flag [PATCH] splice: add comments documenting more of the code [PATCH] splice: improve writeback and clean up page stealing [PATCH] splice: fix shadow[] filling logic
| * [PATCH] splice: fix page stealing LRU handling.Jens Axboe2006-04-021-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | Originally from Nick Piggin, just adapted to the newer branch. You can't check PageLRU without holding zone->lru_lock. The page release code can get away with it only because the page refcount is 0 at that point. Also, you can't reliably remove pages from the LRU unless the refcount is 0. Ever. Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Jens Axboe <axboe@suse.de>
| * [PATCH] splice: add a SPLICE_F_MORE flagJens Axboe2006-04-021-0/+1
| | | | | | | | | | | | | | This lets userspace indicate whether more data will be coming in a subsequent splice call. Signed-off-by: Jens Axboe <axboe@suse.de>
| * [PATCH] splice: improve writeback and clean up page stealingJens Axboe2006-04-021-1/+0
| | | | | | | | | | | | | | | | | | | | By cleaning up the writeback logic (killing write_one_page() and the manual set_page_dirty()), we can get rid of ->stolen inside the pipe_buffer and just keep it local in pipe_to_file(). This also adds dirty page balancing logic and O_SYNC handling. Signed-off-by: Jens Axboe <axboe@suse.de>
* | Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2006-04-0243-630/+994
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: (27 commits) [ARM] 3433/1: ARM: OMAP: 8/8 Update board files [ARM] 3455/1: ARM: OMAP: 7/8 Misc updates, take 2 [ARM] 3454/1: ARM: OMAP: 6/8 Update framebuffer low-level init code, take 2 [ARM] 3430/1: ARM: OMAP: 5/8 Update PM [ARM] 3429/1: ARM: OMAP: 4/8 Update GPIO [ARM] 3428/1: ARM: OMAP: 3/8 Update pin multiplexing [ARM] 3427/1: ARM: OMAP: 2/8 Update timers [ARM] 3426/1: ARM: OMAP: 1/8 Update clock framework [ARM] 3396/2: AT91RM9200 Platform devices update [ARM] 3395/2: AT91RM9200 Dataflash Card vs MMC selection [ARM] 3393/2: AT91RM9200 LED support [ARM] 3453/1: Poodle: Correctly set the memory size [ARM] 3446/1: i.MX: MMC/SD SDHC controller registration for i.MX/MX1 MX1ADS board [ARM] 3444/1: i.MX: Scatter-gather DMA emulation for i.MX/MX1 [ARM] 3451/1: ep93xx: use the m48t86 rtc driver on the ts72xx platform [ARM] 3450/1: ep93xx: use the ep93xx rtc driver [ARM] 3452/1: [S3C2410] RX3715 - add nand information [ARM] 3449/1: [S3C2410] Anubis - fix NAND timings [ARM] 3448/1: [S3C2410] Settle delay when _enabling_ USB PLL [ARM] 3442/1: [S3C2410] SMDK: NAND device setup ...
| * | [ARM] 3433/1: ARM: OMAP: 8/8 Update board filesTony Lindgren2006-04-0210-45/+196
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Tony Lindgren This patch syncs OMAP board support with linux-omap tree. The highlights of the patch are: - Add support for Nokia 770 by Juha Yrjola - Add support for Samsung Apollon by Kyungmin Park - Add support for Amstrad E3 videophone by Jonathan McDowell - Remove board-netstar.c board support as requested by Ladislav Michl - Do platform_device registration in board files by Komal Shah et al. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3455/1: ARM: OMAP: 7/8 Misc updates, take 2Tony Lindgren2006-04-0211-7/+324
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Tony Lindgren Update misc OMAP core code from linux-omap tree: - McBSP updates by Samuel Ortiz, Andrzej Zaborowski - Whitespace cleanups by Ladislav Michl - Other fixes by various linux-omap developers Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3454/1: ARM: OMAP: 6/8 Update framebuffer low-level init code, take 2Tony Lindgren2006-04-023-27/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Tony Lindgren Update OMAP framebuffer low-level init code from linux-omap tree by Imre Deak. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3430/1: ARM: OMAP: 5/8 Update PMTony Lindgren2006-04-022-8/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Tony Lindgren Update OMAP PM code from linux-omap tree: - Move PM code from plat-omap to mach-omap1 and mach-omap2 by Tony Lindgren - Add minimal PM support for omap24xx by Tony Lindgren and Richard Woodruff - Misc updates to omap1 PM code by Tuukka Tikkanen et al - Updates to the SRAM code needed for PM and FB by Imre Deak Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3428/1: ARM: OMAP: 3/8 Update pin multiplexingTony Lindgren2006-04-021-3/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Tony Lindgren Update OMAP pin multiplexing code from linux-omap tree. This patch adds new pin configurations by various OMAP developers, and suport for omap730 by Brian Swetland. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3427/1: ARM: OMAP: 2/8 Update timersTony Lindgren2006-04-022-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Tony Lindgren Update OMAP timers from linux-omap tree. The highlights of the patch are: - Move timer32k code from mach-omap1 to plat-omap and make it work also on omap24xx by Tony Lindgren - Add support for dmtimer idle check for PM by Tuukka Tikkanen Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3426/1: ARM: OMAP: 1/8 Update clock frameworkTony Lindgren2006-04-023-419/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Tony Lindgren Update OMAP clock framework from linux-omap tree. The highlights of the patch are: - Add support for omap730 clocks by Andrzej Zaborowski - Fix compile warnings by Dirk Behme - Add support for using dev id by Tony Lindgren and Komal Shah - Move memory timings and PRCM into separate files by Tony Lindgren Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3396/2: AT91RM9200 Platform devices updateAndrew Victor2006-04-021-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Andrew Victor This patch updates the platform device resources for the Ethernet and MMC peripherals. It also adds platform device information for the NAND (SmartMedia), I2C and the RTC. (This version of the patch can be applied before Patch 3392/1) Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3393/2: AT91RM9200 LED supportAndrew Victor2006-04-021-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Andrew Victor This patch adds support for the LED(s) on the AT91RM9200-based boards. (This version of the patch can be applied before Patch 3392/1) Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3444/1: i.MX: Scatter-gather DMA emulation for i.MX/MX1Pavel Pisa2006-04-022-14/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Pavel Pisa This patch contains simplified set of changes to add scatter-gather emulation capability into MX1 DMA support. The result should be still usable for next combination of DMA transfers Statter-Gather/linear/2D/FIFO to linear/2D/FIFO and linear/2D/FIFO to Statter-Gather/2D/FIFO The patch corrects channel priority allocation to be compatible with MX1 hardware implementation. Previous code has not been adapted from its PXA original. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3451/1: ep93xx: use the m48t86 rtc driver on the ts72xx platformLennert Buytenhek2006-04-021-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Lennert Buytenhek Instantiate the recently merged m48t86 rtc driver in the ts72xx code. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3443/1: [S3C2410] Improve IRQ entry codeBen Dooks2006-04-021-100/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Ben Dooks Remove the old debug from the IRQ entry code, update the comments on the handling of the IRQ registers. The message "bad interrupt offset" is removed as it is only helpful for debugging, and can cause printk() flooding when under load. Make the code to deal with GPIO interrupts faster, and use the same path to deal with unexplained results from the IRQ registers. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3439/2: xsc3: add I/O coherency supportLennert Buytenhek2006-04-025-7/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Lennert Buytenhek This patch adds support for the I/O coherent cache available on the xsc3. The approach is to provide a simple API to determine whether the chipset supports coherency by calling arch_is_coherent() and then setting the appropriate system memory PTE and PMD bits. In addition, we call this API on dma_alloc_coherent() and dma_map_single() calls. A generic version exists that will compile out all the coherency-related code that is not needed on the majority of ARM systems. Note that we do not check for coherency in the dma_alloc_writecombine() function as that still requires a special PTE setting. We also don't touch dma_mmap_coherent() as that is a special ARM-only API that is by definition only used on non-coherent system. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3438/1: ixp23xx: add pci slave supportLennert Buytenhek2006-04-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Lennert Buytenhek On the Double Espresso board, the IXP2350s are PCI slave devices and we skip calling pci_common_init() as that enumerates the bus. But even though we are a PCI slave device, there is still some PCI-related setup that has to be done. Create ixp23xx_pci_common_init(), move the common initialisation bits there, and have this function called from both the PCI master and the PCI slave init path. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | Merge master.kernel.org:/home/rmk/linux-2.6-mmcLinus Torvalds2006-04-022-0/+116
|\ \ \ | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-mmc: [ARM] 3457/1: i.MX: SD/MMC support for i.MX/MX1 [ARM] 3456/1: AT91RM9200 support for 2.6 (MMC/SD driver)
| * | | [ARM] 3457/1: i.MX: SD/MMC support for i.MX/MX1Pavel Pisa2006-04-021-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Pavel Pisa This patch adds support of i.MX/MX1 SD/MMC controller. It has been significantly redesigned from the original Sascha Hauer's version to support scatter-gather DMA, to conform to latest Pierre Ossman's and Russell King's MMC-SD Linux 2.6.x infrastructure. The handling of all events has been moved to the softirq context and is designed with no busy-looping in mind. Unfortunately some controller bugs has to be overcome by limited looping about 2-20 usec but these are observed only for initial card recognition phase. There are still some missing/missed IRQs problems under heavy load. Help of somebody with access to the full SDHC design information is probably necessary. Regenerated against 2.6.16-git-060402 to solve clash with other patches. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | [ARM] 3456/1: AT91RM9200 support for 2.6 (MMC/SD driver)Andrew Victor2006-04-021-0/+104
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Andrew Victor This patch adds support for the MMC/SD card interface on the Atmel AT91RM9200 processor. Original driver was by Nick Randell, but a number of people have subsequently worked on it. It's currently maintained by Malcolm Noyes. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | Merge master.kernel.org:/pub/scm/linux/kernel/git/perex/alsaLinus Torvalds2006-04-023-11/+9
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (28 commits) [ALSA] Kconfig SND_SEQUENCER_OSS help text fix [ALSA] Add Aux input switch control for Aureon Universe [ALSA] pcxhr - Fix the crash with REV01 board [ALSA] sound/pci/hda: use create_singlethread_workqueue() [ALSA] hda-intel - Add support of ATI SB600 [ALSA] cs4281 - Fix the check of timeout in probe [ALSA] cs4281 - Fix the check of right channel [ALSA] Test volume resolution of usb audio at initialization [ALSA] maestro3.c: fix BUG, optimization [ALSA] HDA/Realtek: multiple input mux definitions and pin mode additions [ALSA] AdLib FM card driver [ALSA] Fix / clean up PCM-OSS setup hooks [ALSA] Clean up PCM codes (take 2) [ALSA] Tiny clean up of PCM codes [ALSA] ISA drivers bailing on first !enable[i] [ALSA] Remove obsolete kfree_nocheck call [ALSA] Remove obsolete kfree_nocheck call [ALSA] Add snd-als300 driver for Avance Logic ALS300/ALS300+ soundcards [ALSA] Add snd-riptide driver for Conexant Riptide chip [ALSA] hda-codec - Fix noisy output wtih AD1986A 3stack model ...
| * | | [ALSA] Fix / clean up PCM-OSS setup hooksTakashi Iwai2006-03-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Fix possible race of referring the setup hook from the running PCM - Fix memory leak in an error path of proc write - Clean up the setup hook parser Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | [ALSA] Clean up PCM codes (take 2)Takashi Iwai2006-03-312-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Clean up initialization and destruction of substream instance Now snd_pcm_open_substream() alone does most initialization jobs. Add pcm_release callback for cleaning up at snd_pcm_release_substream() - Tidy up PCM oss code Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | [ALSA] Tiny clean up of PCM codesTakashi Iwai2006-03-311-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | - Make snd_pcm_prepare() static - Clean up snd_pcm_kernel_*_ioctl() functions, reduce exports Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | [ALSA] Cleanup unused argument for snd_power_wait()Takashi Iwai2006-03-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Removed the unused file argument of snd_power_wait(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds2006-04-022-2/+2
|\ \ \ \ | |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (48 commits) Documentation: fix minor kernel-doc warnings BUG_ON() Conversion in drivers/net/ BUG_ON() Conversion in drivers/s390/net/lcs.c BUG_ON() Conversion in mm/slab.c BUG_ON() Conversion in mm/highmem.c BUG_ON() Conversion in kernel/signal.c BUG_ON() Conversion in kernel/signal.c BUG_ON() Conversion in kernel/ptrace.c BUG_ON() Conversion in ipc/shm.c BUG_ON() Conversion in fs/freevxfs/ BUG_ON() Conversion in fs/udf/ BUG_ON() Conversion in fs/sysv/ BUG_ON() Conversion in fs/inode.c BUG_ON() Conversion in fs/fcntl.c BUG_ON() Conversion in fs/dquot.c BUG_ON() Conversion in md/raid10.c BUG_ON() Conversion in md/raid6main.c BUG_ON() Conversion in md/raid5.c Fix minor documentation typo BFP->BPF in Documentation/networking/tuntap.txt ...
| * | | Documentation: fix minor kernel-doc warningsMartin Waitz2006-04-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch updates the comments to match the actual code. Signed-off-by: Martin Waitz <tali@admingilde.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
| * | | Merge with git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.gitAdrian Bunk2006-04-024-23/+35
| |\ \ \ | | | |/ | | |/|
| * | | Fix comments: s/granuality/granularity/Kalin KOZHUHAROV2006-04-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I was grepping through the code and some `grep ganularity -R .` didn't catch what I thought. Then looking closer I saw the term "granuality" used in only four places (in comments) and granularity in many more places describing the same idea. Some other facts: dictionary.com does not know such a word define:granuality on google is not found (and pages for granuality are mostly related to patches to the kernel) it has not been discussed as a term on LKML, AFAICS (=Can Search) To be consistent, I think granularity should be used everywhere. Signed-off-by: Kalin KOZHUHAROV <kalin@thinrope.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* | | | Merge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds2006-04-027-87/+278
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (49 commits) V4L/DVB (3667b): cpia2: fix function prototype V4L/DVB (3702): Make msp3400 routing defines more consistent V4L/DVB (3700): Remove obsolete commands from tvp5150.c V4L/DVB (3697): More msp3400 and bttv fixes V4L/DVB (3696): Previous change for cx2341X boards broke the remote support V4L/DVB (3693): Fix msp3400c and bttv stereo/mono/bilingual detection/handling V4L/DVB (3692): Keep experimental SLICED_VBI defines under an #if 0 V4L/DVB (3689): Kconfig: fix VP-3054 Secondary I2C Bus build configuration menu dependencies V4L/DVB (3673): Fix budget-av CAM reset V4L/DVB (3672): Fix memory leak in dvr open V4L/DVB (3671): New module parameter 'tv_standard' (dvb-ttpci driver) V4L/DVB (3670): Fix typo in comment V4L/DVB (3669): Configurable dma buffer size for saa7146-based budget dvb cards V4L/DVB (3653h): Move usb v4l docs into Documentation/video4linux V4L/DVB (3667a): Fix SAP + stereo mode at msp3400 V4L/DVB (3666): Remove trailing newlines V4L/DVB (3665): Add new NEC uPD64031A and uPD64083 i2c drivers V4L/DVB (3663): Fix msp3400c wait time and better audio mode fallbacks V4L/DVB (3662): Don't set msp3400c-non-existent register V4L/DVB (3661): Add wm8739 stereo audio ADC i2c driver ...
| * | | | V4L/DVB (3702): Make msp3400 routing defines more consistentHans Verkuil2006-04-021-30/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Renamed various msp3400 routing defines to be more consistent and less confusing. Esp. the MSP_DSP_OUT defines were confusing since it is really a DSP input. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | | V4L/DVB (3692): Keep experimental SLICED_VBI defines under an #if 0Hans Verkuil2006-04-021-57/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sliced VBI defines added in videodev2.h are removed since requires more discussion. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | | V4L/DVB (3666): Remove trailing newlinesHans Verkuil2006-04-022-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | | V4L/DVB (3665): Add new NEC uPD64031A and uPD64083 i2c driversHans Verkuil2006-04-022-0/+100
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add support for the uPD64031A NEC Electronics Ghost Reduction i2c device - Add support for the uPD6408x NEC Electronics 3-Dimensional Y/C separation i2c device. Signed-off-by: Takahiro Adachi <tadachi@tadachi-net.com> Signed-off-by: Takeru Komoriya <komoriya@paken.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | | V4L/DVB (3610): Added the new routing commands to cx25840.Hans Verkuil2006-04-021-0/+64
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | | V4L/DVB (3608): Implement new routing commands in saa7127.cHans Verkuil2006-04-021-0/+41
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | | | V4L/DVB (3607): Implement routing command for saa7115.cHans Verkuil2006-04-021-0/+37
| | |/ / | |/| | | | | | | | | | | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
OpenPOWER on IntegriCloud