summaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] syscall entry/exit revampDavid Woodhouse2006-01-092-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This cleanup patch speeds up the null syscall path on ppc64 by about 3%, and brings the ppc32 and ppc64 code slightly closer together. The ppc64 code was checking current_thread_info()->flags twice in the syscall exit path; once for TIF_SYSCALL_T_OR_A before disabling interrupts, and then again for TIF_SIGPENDING|TIF_NEED_RESCHED etc after disabling interrupts. Now we do the same as ppc32 -- check the flags only once in the fast path, and re-enable interrupts if necessary in the ptrace case. The patch abolishes the 'syscall_noerror' member of struct thread_info and replaces it with a TIF_NOERROR bit in the flags, which is handled in the slow path. This shortens the syscall entry code, which no longer needs to clear syscall_noerror. The patch adds a TIF_SAVE_NVGPRS flag which causes the syscall exit slow path to save the non-volatile GPRs into a signal frame. This removes the need for the assembly wrappers around sys_sigsuspend(), sys_rt_sigsuspend(), et al which existed solely to save those registers in advance. It also means I don't have to add new wrappers for ppoll() and pselect(), which is what I was supposed to be doing when I got distracted into this... Finally, it unifies the ppc64 and ppc32 methods of handling syscall exit directly into a signal handler (as required by sigsuspend et al) by introducing a TIF_RESTOREALL flag which causes _all_ the registers to be reloaded from the pt_regs by taking the ret_from_exception path, instead of the normal syscall exit path which stomps on the callee-saved GPRs. It appears to pass an LTP test run on ppc64, and passes basic testing on ppc32 too. Brief tests of ptrace functionality with strace and gdb also appear OK. I wouldn't send it to Linus for 2.6.15 just yet though :) Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: moved ipic code to arch/powerpcKumar Gala2006-01-091-0/+0
| | | | | | | | Moved 83xx and QUICC Engine interrupt handling code into arch/powerpc as a precursor of getting 83xx sub-arch building in arch/powerpc. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: Merge kexecMichael Ellerman2006-01-092-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch merges, to some extent, the PPC32 and PPC64 kexec implementations. We adopt the PPC32 approach of having ppc_md callbacks for the kexec functions. The current PPC64 implementation becomes the "default" implementation for PPC64 which platforms can select if they need no special treatment. I've added these default callbacks to pseries/maple/cell/powermac, this means iSeries no longer supports kexec - but it never worked anyway. I've renamed PPC32's machine_kexec_simple to default_machine_kexec, inline with PPC64. Judging by the comments it might be better named machine_kexec_non_of, or something, but at the moment it's the only implementation for PPC32 so it's the "default". Kexec requires machine_shutdown(), which is in machine_kexec.c on PPC32, but we already have in setup-common.c on powerpc. All this does is call ppc_md.nvram_sync, which only powermac implements, so instead make machine_shutdown a ppc_md member and have it call core99_nvram_sync directly on powermac. I've also stuck relocate_kernel.S into misc_32.S for powerpc. Built for ARCH=ppc, and 32 & 64 bit ARCH=powerpc, with KEXEC=y/n. Booted on P5 LPAR and successfully kexec'ed. Should apply on top of 493f25ef4087395891c99fcfe2c72e62e293e89f. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] PPC_PREP: remove unneeded exportsAdrian Bunk2006-01-091-1/+0
| | | | | | | | | This patch removes the EXPORT_SYMBOL'ed but completely unused variable ucSystemType and removes the unneeded EXPORT_SYMBOL(_prep_type). Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Tom Rini <trini@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2006-01-0764-302/+291
|\
| * [ARM] byteorder.h needs linux/compiler.hRussell King2006-01-071-0/+1
| | | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] Move asm/hardware/clock.h to linux/clk.hRussell King2006-01-072-2/+3
| | | | | | | | | | | | | | This is needs to be visible to other architectures using the AMBA bus and peripherals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * Merge with Linus' kernel.Russell King2006-01-07315-5850/+6299
| |\
| * | [ARM] Move AMBA include files to include/linux/amba/Russell King2006-01-077-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Since the ARM AMBA bus is used on MIPS as well as ARM, we need to make the bus available for other architectures to use. Move the AMBA include files from include/asm-arm/hardware/ to include/linux/amba/ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3239/1: Add ARM optimised swab32Andre McCurdy2006-01-071-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Andre McCurdy Replaces generic swab32 routine with a more ARM friendly version. Reduces kernel text size by approx 1200 bytes when compiled with 3.4.4 and approx 2400 bytes with 4.0.2 Probably some performance benefit as well. Signed-off-by: Andre McCurdy <armccurdy@yahoo.co.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3206/1: Modifications to the bus arbiter controller for the Intel PXA27xJared Hulbert2006-01-051-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Jared Hulbert The following patch changes the bus arbiter controller settings for the Intel PXA27x Application Processor Family. Up to 5% better video performance. It parks the bus on the core while not in use and sets the arbitration for other bus items. The patch only applies changes to the Intel Mainstone development platform. This patch is not compatible with preproduction Intel PXA27x silicon. This patch is based on the Intel Linux Preview Kit released to the public on 25 Feb. 2005 found at ftp://ftp.arm.linux.org.uk/pub/linux/arm/people/xscale/mainstone/02-25-2005/. Signed-off-by: Justin A Treon <justin_treon@yahoo.com> Signed-off-by: Jared Hulbert <jaredeh@gmail.com> Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3226/1: IXP4xx runtime expansion bus window size configurationDeepak Saxena2006-01-056-27/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Deepak Saxena The expansion bus on the IXP46x NPU can be configured for either 32MiB or 16MiB windows and changing the configuration causes the base address for each chip select for each region to change. Because of this, we cannot hardcode the physical base as we currently do. This patch checks the expansion bus configuration registers at runtime to determine the appropriate window size. Note that this requires that the bootloader already configured the device sizes appropriately, but I feel that is valid assumption to make as the bootloader must configure and access the flash window, the output display (LCD, LEDs, etc) window, and other expansion bus devices. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3228/1: SharpSL: Move PM code to arch/arm/commonRichard Purdie2006-01-051-0/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Richard Purdie This patch moves a large chunk of the sharpsl_pm driver to arch/arm/common so that it can be reused on other devices such as the SL-5500 (collie). It also abstracts some functions from the core into the machine and platform specific parts of the driver to aid reuse. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3225/1: add symbolic names for enp2611 gpio interruptsLennert Buytenhek2006-01-041-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Lennert Buytenhek Add symbolic names for the five ixp2400 GPIO lines on the enp2611 that are used as interrupts. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3224/1: add masked thread interrupt status registers for ixp2000Lennert Buytenhek2006-01-041-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Lennert Buytenhek In its interrupt handler, the (NAPI) ixp2000 netdev driver needs to use the masked thread interrupt status register (instead of the raw one) to prevent scheduling polling when polling is already running when a TXdone interrupt comes in. The definitions for the masked status registers were not in yet, so this patch adds them. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3223/1: remove ixdp2x01 cs89x0 hackLennert Buytenhek2006-01-041-98/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Lennert Buytenhek Remove the ixdp2x01 cs89x0 hack from ixp2000's io implementation. Since the cs89x0 driver has been made properly aware of the odd way the cs89x0 is hooked up on the ixdp2x01, we don't need this hack anymore. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3218/1: PAGE_SHIFT undeclared in arch-ixp4xx/memory.h (adjust_zones ↵Rod Whitby2006-01-041-23/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | moved out of line) Patch from Rod Whitby PAGE_SHIFT is undeclared in include/asm-arm/arch-ixp4xx/memory.h, identified by the following kernel compilation error: CC [M] sound/core/memory.o In file included from include/asm/memory.h:27, from include/asm/io.h:28, from sound/core/memory.c:24: include/asm/arch/memory.h: In function `__arch_adjust_zones': include/asm/arch/memory.h:28: error: `PAGE_SHIFT' undeclared (first use in this function) This patch replaces my previous attempt at fixing this problem (Patch 3214/1) and is based on the following feedback: Russell King wrote: > The error you see came up on SA1100. The best solution was to move > the __arch_adjust_zones() function out of line. I suggest ixp4xx > does the same. I have moved the function out of line into arch/arm/mach-ixp4xx/common-pci.c as suggested. Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3215/1: Iomega NAS 100d (MACH_NAS100D) machine supportRod Whitby2006-01-043-0/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Rod Whitby This patch adds support for a new arm/ixp4xx machine - the Iomega NAS 100d network attached storage product. The NAS100D is a consumer device containing a 266MHz Intel IXP420 processor, 16MB of flash, 64MB of RAM, a 160Gb internal IDE hard disk, and 802.11b/g wireless on an Atheros mini-PCI card. Work on porting the latest 2.6.x kernel to this device is being done by the NSLU2-Linux project (the same team who maintains the port to the Linksys NSLU2 device). In particular, the majority of this patch was authored by Alessandro Zummo, based on the work done for MACH_NSLU2 support by the NSLU2-Linux core team of developers. MACH_NAS100D (as implemented by this patch) can be enabled in jumbo ixp4xx kernels without any affect on the other machines supported by that kernel. This patch applies cleanly against 2.6.15-rc7 and should be trivial to apply to later kernel versions. It does not depend upon any other patches. Modified files (and number of lines inserted): arch/arm/mach-ixp4xx/Kconfig | 8 arch/arm/mach-ixp4xx/Makefile | 1 include/asm-arm/arch-ixp4xx/hardware.h | 1 include/asm-arm/arch-ixp4xx/irqs.h | 9 include/asm-arm/arch-ixp4xx/nas100d.h | 75 arch/arm/mach-ixp4xx/nas100d-pci.c | 77 arch/arm/mach-ixp4xx/nas100d-power.c | 69 arch/arm/mach-ixp4xx/nas100d-setup.c | 133 -- Rod Whitby (NSLU2-Linux project lead) Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] 3192/1: Remove gpio_isr_line_clear() API from IXP4xxDeepak Saxena2006-01-041-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Deepak Saxena Other than interrupt masking purposes, this API is only used when configuring interrupt lines and this patch moves that functionality directly into the ixp4xx_set_irq_type() implementation as board level PCI code should not need to worry about those details. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] Remove definition of MAX_DMA_CHANNELS to zeroRussell King2006-01-0418-94/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | Since we now only build arch/arm/kernel/dma.c on machine types which set ISA_DMA_API, we don't need to define MAX_DMA_CHANNELS to 0 to indicate this - this definition becomes superfluous. Remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] Move common definition of MAX_DMA_ADDRESS to asm/dma.hRussell King2006-01-0416-31/+7
| | | | | | | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] Remove '__address' from scatterlist and convert to DMA APIRussell King2006-01-042-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The old __address element in struct scatterlist remained from older kernels because the ARM DMA emulation code made use of it. Move this field into struct dma_struct, and convert DMA emulation code to setup a SG entry as required. Also, convert DMA emulation code to use the new DMA API rather than the PCI DMA API. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] Move ISA DMA bus_to_virt() out of set_dma_addr()Russell King2006-01-041-1/+3
| | | | | | | | | | | | | | | | | | | | | Allow the compiler to optimise the bus_to_virt(virt_to_bus()) transformation in the ARM ISA DMA interface. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] Remove clk_use()/clk_unuse()Russell King2006-01-031-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | It seems that clk_use() and clk_unuse() are additional complexity which isn't required anymore. Remove them from the clock framework to avoid the additional confusion which they cause, and update all ARM machine types except for OMAP. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] Add additional documentation to the clock source frameworkRussell King2006-01-031-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | It seems that there's some confusion over how the clock source framework should be used. Add some additional comments to explain the ambiguous areas. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] Cleanup ARM includesRussell King2006-01-0318-5/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arch/arm/kernel/entry-armv.S has contained a comment suggesting that asm/hardware.h and asm/arch/irqs.h should be moved into the asm/arch/entry-macro.S include. So move the includes to these two files as required. Add missing includes (asm/hardware.h, asm/io.h) to asm/arch/system.h includes which use those facilities, and remove asm/io.h from kernel/process.c. Remove other unnecessary includes from arch/arm/kernel, arch/arm/mm and arch/arm/mach-footbridge. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds2006-01-071-0/+17
|\ \ \
| * | | [SERIAL] Add support for more Connect Tech PCI serial boardsGareth Howlett2006-01-041-0/+17
| |/ / | | | | | | | | | | | | | | | | | | I've also fixed the sort-ordering comments on this naming convention. Signed-off-by: Stuart MacDonald <stuartm@connecttech.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | Merge master.kernel.org:/home/rmk/linux-2.6-mmcLinus Torvalds2006-01-071-0/+5
|\ \ \ | |_|/ |/| |
| * | [MMC] Fix missing ','Russell King2006-01-041-1/+1
| | | | | | | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [MMC] Improve MMC card block size selectionRussell King2006-01-031-0/+5
| |/ | | | | | | | | | | | | | | | | | | | | Select a block size for IO based on the read and write block size combinations, and whether the card supports partial block reads and/or partial block writes. If we are able to satisfy block reads but not block writes, mark the device read only. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6Linus Torvalds2006-01-065-55/+20
|\ \
| * \ Merge ../torvalds-2.6/Greg Kroah-Hartman2006-01-06124-1969/+1843
| |\ \
| * | | [PATCH] i2c: i2c-nforce2 add nforce4 MCP-04 device IDJean Delvare2006-01-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | One more supported PCI ID for the i2c-nforce2 driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | [PATCH] i2c: driver ID list cleanupsJean Delvare2006-01-051-20/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cleanups to i2c driver ID list: * Remove mostly bogus comments about driver ID ranges. * Drop experimental driver IDs, as the concept is pretty broken. * Drop now unused IDs of non-I2C (ISA) drivers. * Drop a few more IDs which are no more used. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | [PATCH] hwmon: add VRM/VID support for some VIA CPUsRudolf Marek2006-01-051-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the VIA CENTAUR CPUs to detection table. Table was updated to treat future Intel x86 CPUs as VRD10. Stepping field was added, because some VIA CPUs have different VRM specs across stepping. I changed the vrm type to u8 because all drivers use u8 anyway. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | [PATCH] I2C: Make i2c_add_driver automatically set the proper module ownerGreg Kroah-Hartman2006-01-051-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This prevents i2c drivers from messing up and forgetting to set the module owner of their driver. It also reduces the size of their drivers by one line :) Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: Jean Delvare <khali@linux-fr.org>
| * | | [PATCH] i2c: Drop i2c_driver.{owner,name}, 5 of 11Laurent Riffard2006-01-051-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We should use the i2c_driver.driver's .name and .owner fields instead of the i2c_driver's ones. This patch updates the drivers/media/video and usb/media drivers. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | [PATCH] i2c: Drop i2c_driver.{owner,name}, 1 of 11Laurent Riffard2006-01-051-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We should use the i2c_driver.driver's .name and .owner fields instead of the i2c_driver's ones. This patch updates the core of the i2c drivers: it removes .name and .owner fields from the struct i2c_device and modify various functions to use struct device fields instead. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | [PATCH] i2c: i2c_get_client is goneJean Delvare2006-01-051-11/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The i2c_get_client function doesn't exist anymore, so we shouldn't have a definition for it in i2c.h. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | [PATCH] i2c: Rework client usage count, 3 of 3Jean Delvare2006-01-051-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not limit the usage count of i2c clients to 1. In other words, change the client usage count behavior from the old I2C_CLIENT_ALLOW_USE to the old I2C_CLIENT_ALLOW_MULTIPLE_USE. The rationale is that no driver actually needs the limiting behavior, and the unlimiting behavior is slightly easier to implement. Update the documentation to reflect this change. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | [PATCH] i2c: Rework client usage count, 2 of 3Jean Delvare2006-01-051-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make I2C_CLIENT_ALLOW_USE the default for all i2c clients. It doesn't hurt if the usage count is actually never used for any given driver, and allows for nice code simplifications in i2c-core. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | [PATCH] i2c: Rework client usage count, 1 of 3Jean Delvare2006-01-051-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | No i2c client uses the I2C_CLIENT_ALLOW_MULTIPLE_USE flag, drop it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | [PATCH] i2c: Drop i2c_driver.flags, 3 of 3Jean Delvare2006-01-051-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The flags member of the i2c_driver structure is no more used. Drop it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | [PATCH] i2c: Drop i2c_driver.flags, 2 of 3Jean Delvare2006-01-051-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Just about every i2c chip driver sets the I2C_DF_NOTIFY flag, so we can simply make it the default and drop the flag. If any driver really doesn't want to be notified when i2c adapters are added, that driver can simply omit to set .attach_adapter. This approach is also more robust as it prevents accidental NULL pointer dereferences. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | [PATCH] i2c: Drop i2c_driver.flags, 1 of 3Jean Delvare2006-01-051-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The I2C_DF_DUMMY flag is gone since 2.5.70, it's about time to drop all ifdef'd out references thereto. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2006-01-064-9/+9
|\ \ \ \
| * | | | [NET]: Endian-annotate in_aton()Alexey Dobriyan2006-01-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | [NET]: Endian-annotate struct iphdrAlexey Dobriyan2006-01-061-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | And fix trivial warnings that emerged. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | [NET]: Change sk_run_filter()'s return type in net/core/filter.cKris Katterjohn2006-01-062-3/+3
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | It should return an unsigned value, and fix sk_filter() as well. Signed-off-by: Kris Katterjohn <kjak@ispwest.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud