summaryrefslogtreecommitdiffstats
path: root/include/scsi
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] fix async scan add/remove race resulting in an oopsJames Bottomley2009-11-261-0/+1
| | | | | | | | | | | | | | | | | | | Async scanning introduced a very wide window where the SCSI device is up and running but has not yet been added to sysfs. We delay the adding until all scans have completed to retain the same ordering as sync scanning. This delay in visibility causes an oops if a device is removed before we make it visible because the SCSI removal routines have an inbuilt assumption that if a device is in SDEV_RUNNING state, it must be visible (which is not necessarily true in the async scanning case). Fix this by introducing an additional is_visible flag which we can use to condition the tear down so we do the right thing for running but not yet made visible. Reported-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] Fix incorrect reporting of host protection capabilitiesMartin K. Petersen2009-11-061-18/+11
| | | | | | | | | | The advent of DIF Type 2 devices exposed some missing break statements in the protection mask switch constructs. However, rewriting the code to use an index into a small static array seemed like a more elegant solution. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libiscsi: iscsi_session_setup to allow for private spaceJayamohan Kallickal2009-10-021-1/+2
| | | | | | | | | This patch contains changes that allow iscsi_session_setup to allocate private space for LLD's Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Acked-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] sd: Support disks formatted with DIF Type 2Martin K. Petersen2009-10-021-0/+3
| | | | | | | | | | | Disks formatted with DIF Type 2 reject READ/WRITE 6/10/12/16 commands when protection is enabled. Only the 32-byte variants are supported. Implement support for issusing 32-byte READ/WRITE and enable Type 2 drives in the protection type detection logic. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] sd: Detach DIF from block integrity infrastructureMartin K. Petersen2009-10-021-4/+11
| | | | | | | | | | | | So far we have only issued DIF commands if CONFIG_BLK_DEV_INTEGRITY is enabled. However, communication between initiator and target should be independent of protection information DMA. There are DIF-only host adapters coming out that will be able to take advantage of this. Move the relevant DIF bits to sd.c. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] Deprecate SCSI_PROT_*_CONVERT operationsMartin K. Petersen2009-10-021-4/+0
| | | | | | | | | | | | | | The checksum format is orthogonal to whether the protection information is being passed on beyond the HBA or not. It is perfectly valid to use a non-T10 CRC with WRITE_STRIP and READ_INSERT. Consequently it no longer makes sense to explicitly refer to the conversion in the protection operation. Update sd_dif and lpfc accordingly. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Ihab Hamadi <Ihab.Hamadi@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* trivial: remove unnecessary semicolonsJoe Perches2009-09-211-2/+1
| | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* [SCSI] libiscsi, bnx2i: make bound ep check commonMike Christie2009-09-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | bnx2i currently has a check for if a ep is properly bound, so if iscsi_queuecommand/xmit_task is called while there is no ep we will not queue IO. be2iscsi sends IO from queuecommand/xmit_task like how bnx2i does and needs a similar test. This patch has us just use the suspend_bit test for this. When ep_poll has succeeed iscsid will call conn_bind, the LLD will then call iscsi_conn_bind which will clear the suspend bit. When ep_disconnect is called (or if there is a conn error) we set the suspend bit. For the ep_disconnect case I am adding a helper in this patch that will take the session lock to make sure iscsi_queuecommand/xmit_task is not running and it will set the suspend bit. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libiscsi: add completion function for drivers that do not need pdu ↵Mike Christie2009-09-121-0/+2
| | | | | | | | | | | | processing beiscsi does not need the iscsi scsi cmd processing. It does not even get this info on the completion path. This adds a function to just update the sequencing numbers and complete a task. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libfc: send GPN_ID in reaction to single-port RSCNs.Joe Eykholt2009-09-101-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | When an RSCN indicates changes to individual remote ports, don't blindly log them out and then back in. Instead, determine whether they're still in the directory, by doing GPN_ID. If that is successful, call login, which will send ADISC and reverify, otherwise, call logoff. Perhaps we should just delete the rport, not send LOGO, but it seems safer. Also, fix a possible issue where if a mix of records in the RSCN cause us to queue disc_ports for disc_single and then we decide to do full rediscovery, we leak memory for those disc_ports queued. So, go through the list of disc_ports even if doing full discovery. Free the disc_ports in any case. If any of the disc_single() calls return error, do a full discovery. The ability to fill in GPN_ID requests was added to fc_ct_fill(). For this, it needs the FC_ID to be passed in as an arg. The did parameter for fc_elsct_send() is used for that, since the actual D_DID will always be 0xfffffc for all CT requests so far. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libfc: use ADISC to verify rport login stateJoe Eykholt2009-09-102-0/+22
| | | | | | | | | | | | | | | | | When rport_login is called on an rport that is already thought to be logged in, use ADISC. If that fails, redo PLOGI. This is less disruptive after fabric changes that don't affect the state of the target. Implement the sending of ADISC via fc_els_fill. Add ADISC state to the rport state machine. This is entered from READY and returns to READY after successful completion. If it fails, the rport is either logged off and deleted or re-does PLOGI. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libfc: improve debug messages for ELS response handlersJoe Eykholt2009-09-101-0/+5
| | | | | | | | | Improve lport and rport debug messages to indicate whether the response is LS_ACC, LS_RJT, closed, or timeout. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libfc: move remote port lookup for ELS requests into fc_rport.c.Joe Eykholt2009-09-101-1/+1
| | | | | | | | | | | | This moves the remote port lookup for incoming ELS requests into fc_rport.c, in preparation for handing PLOGI and LOGO from unknown rports. This changes the arg to rport_recv_req from an rdata to an lport. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libfc: Initialize fc_rport_identifiers inside fc_rport_createRobert Love2009-09-101-8/+9
| | | | | | | | | | | Currently these values are initialized by the callers. This was exposed by a later patch that adds PLOGI request support. The patch failed to initialize the new remote port's roles and it caused problems. This patch has the rport_create routine initialize the identifiers and then the callers can override them with real values. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libfc: fix: empty zone causes endless discovery retries.Joe Eykholt2009-09-101-0/+1
| | | | | | | | | | | On some switches, an empty zone causes GPN_FT to be rejected with reason 9 (unable) explanation 7 (FC-4 types not registered), which causes discovery to be retried endlessly. Treat this as just an empty response and consider discovery complete. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libfc: do not log off rports before or after discoveryJoe Eykholt2009-09-101-0/+3
| | | | | | | | | | | | | | | When receiving an RSCN, do not log off all rports. This is extremely disruptive. If, after the GPN_FT response, some rports haven't been listed, delete them. Add field disc_id to structs fc_rport_priv and fc_disc. disc_id is an arbitrary serial number used to identify the rports found by the latest discovery. This eliminates the need to go through the rport list when restarting discovery. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libfc: remove unused disc->delay elementJoe Eykholt2009-09-101-1/+0
| | | | | | | | Delete unused disc->delay element. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libfc: eliminate disc->eventJoe Eykholt2009-09-101-1/+0
| | | | | | | | | | | There was no need to have the discovery status stored in struct fc_disc. Change fc_disc_done() to take the discovery status as an argument and just pass it on to the discovery callback. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libfc: don't create dummy (rogue) remote portsJoe Eykholt2009-09-101-21/+19
| | | | | | | | | | | | | | | | | | Don't create a "dummy" remote port to go with fc_rport_priv. Make the rport truly optional by allocating fc_rport_priv separately and not requiring a dummy rport to be there if we haven't yet done fc_remote_port_add(). The fc_rport_libfc_priv remains as a structure attached to the rport for I/O purposes. Be sure to hold references on rdata when the lock is dropped in fc_rport_work(). Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libfc: rename rport event CREATED to READYJoe Eykholt2009-09-101-1/+1
| | | | | | | | | | | | Remote ports will become READY more than once after ADISC is implemented in a later patch. The event callback that has been called "CREATED" will mean "READY". Rename it now in preparation for those changes. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libfc: make rport structure optionalJoe Eykholt2009-09-101-13/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | Allow a struct fc_rport_priv to have no fc_rport associated with it. This sets up to remove the need for "rogue" rports. Add a few fields to fc_rport_priv that are needed before the fc_rport is created. These are the ids, maxframe_size, classes, and rport pointer. Remove the macro PRIV_TO_RPORT(). Just use rdata->rport where appropriate. To take the place of the get_device()/put_device ops that were used to hold both the rport and rdata, add a reference count to rdata structures using kref. When kref_get decrements the refcount to zero, a new template function releasing the rdata should be called. This will take care of freeing the rdata and releasing the hold on the rport (for now). After subsequent patches make the rport truly optional, this release function will simply free the rdata. Remove the simple inline function fc_rport_set_name(), which becomes semanticly ambiguous otherwise. The caller will set the port_name and node_name in the rdata->Ids, which will later be copied to the rport when it its created. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libfc: change elsct to use FC_ID instead of rdataJoe Eykholt2009-09-102-22/+6
| | | | | | | | | | | | | | | | | tt.elsct_send is used by both FCP and by the rport state machine. After further patches, these two modules will use different structures for the remote port. So, change elsct_send to use the FC_ID instead of the fc_rport_priv as its argument. It currently only uses the FC_ID anyway. For CT requests the destination FC_ID is still implicitly 0xfffffc. After further patches the did arg on CT requests will be used to specify the FC_ID being inquired about for GPN_ID or other queries. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libfc: make fc_rport_priv the primary rport interface.Joe Eykholt2009-09-102-14/+19
| | | | | | | | | | | | | | | | | The rport and discovery modules deal with remote ports before fc_remote_port_add() can be done, because the full set of rport identifiers is not known at early stages. In preparation for splitting the fc_rport/fc_rport_priv allocation, make fc_rport_priv the primary interface for the remote port and discovery engines. The FCP / SCSI layers still deal with fc_rport and fc_rport_libfc_priv, however. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libfc: fix RPORT_TO_PRIV and PRIV_TO_RPORT() macros.Joe Eykholt2009-09-101-2/+2
| | | | | | | | | | | | These macros introduce extra undesirable semicolons that keep them from being used in expressions, and they don't protect against being passed an expression. Add parens and remove the semicolons. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libfc: change interface for rport_createJoe Eykholt2009-09-101-3/+2
| | | | | | | | | | | | | The interface for lport->tt.rport_create() takes a fc_disc_port arg, which is unnatural for most calls. The only reason for this was to avoid passing in the local port as an argument, but otherwise added to complexity. Simplify by just using lport and fc_rport_identifiers. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libfc: prepare to split off struct fc_rport_priv from fc_rport_libfc_privJoe Eykholt2009-09-101-1/+9
| | | | | | | | | | | | | | | While the I/O and LLD interfaces use fc_rport_libfc_priv, the disc and rport interfaces will use fc_rport_priv, which will be separately allocated. Change the disc and rport usage of fc_rport_libfc_priv to fc_rport_priv. Use #define temporarily to make both names equivalent until a subsequent patch splits them. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] fcoe, libfc: fully makes use of per cpu exch pool and then removes ↵Vasu Dev2009-09-051-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | em_lock 1. Updates fcoe_rcv() to queue incoming frames to the fcoe per cpu thread on which this frame's exch was originated and simply use current cpu for request exch not originated by initiator. It is redundant to add this code under CONFIG_SMP, so removes CONFIG_SMP uses around this code. 2. Updates fc_exch_em_alloc, fc_exch_delete, fc_exch_find to use per cpu exch pools, here fc_exch_delete is rename of older fc_exch_mgr_delete_ep since ep/exch are now deleted in pools of EM and so brief new name is sufficient and better name. Updates these functions to map exch id to their index into exch pool using fc_cpu_mask, fc_cpu_order and EM min_xid. This mapping is as per detailed explanation about this in last patch and basically this is just as lower fc_cpu_mask bits of exch id as cpu number and upper bit sum of EM min_xid and exch index in pool. Uses pool next_index to keep track of exch allocation from pool along with pool_max_index as upper bound of exches array in pool. 3. Adds exch pool ptr to fc_exch to free exch to its pool in fc_exch_delete. 4. Updates fc_exch_mgr_reset to reset all exch pools of an EM, this required adding fc_exch_pool_reset func to reset exches in pool and then have fc_exch_mgr_reset call fc_exch_pool_reset for each pool within each EM for a lport. 5. Removes no longer needed exches array, em_lock, next_xid, and total_exches from struct fc_exch_mgr, these are not needed after use of per cpu exch pool, also removes not used max_read, last_read from struct fc_exch_mgr. 6. Updates locking notes for exch pool lock with fc_exch lock and uses pool lock in exch allocation, lookup and reset. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] fcoe, libfc: adds per cpu exch pool within exchange manager(EM)Vasu Dev2009-09-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds per cpu exch pool for these reasons:- 1. Currently an EM instance is shared across all cpus to manage all exches for all cpus. This required em_lock across all cpus for an exch alloc, free, lookup and reset each frame and that made em_lock expensive, so instead having per cpu exch pool with their own per cpu pool lock will likely reduce locking contention in fast path for an exch alloc, free and lookup. 2. Per cpu exch pool will likely improve cache hit ratio since all frames of an exch will be processed on the same cpu on which exch originated. This patch is only prep work to help in keeping complexity of next patch low, so this patch only sets up per cpu exch pool and related helper funcs to be used by next patch. The next patch fully makes use of per cpu exch pool in all code paths ie. tx, rx and reset. Divides per EM exch id range equally across all cpus to setup per cpu exch pool. This division is such that lower bits of exch id carries cpu number info on which exch originated, later a simple bitwise AND operation on exch id of incoming frame with fc_cpu_mask retrieves cpu number info to direct all frames to same cpu on which exch originated. This required a global fc_cpu_mask and fc_cpu_order initialized to max possible cpus number nr_cpu_ids rounded up to 2's power, this will be used in mapping exch id and exch ptr array index in pool during exch allocation, find or reset code paths. Adds a check in fc_exch_mgr_alloc() to ensure specified min_xid lower bits are zero since these bits are used to carry cpu info. Adds and initializes struct fc_exch_pool with all required fields to manage exches in pool. Allocates per cpu struct fc_exch_pool with memory for exches array for range of exches per pool. The exches array memory is followed by struct fc_exch_pool. Adds fc_exch_ptr_get/set() helper functions to get/set exch ptr in pool exches array at specified array index. Increases default FCOE_MAX_XID to 0x0FFF from 0x07EF, so that more exches are available per cpu after above described exch id range division across all cpus to each pool. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] iscsi_tcp: add new conn error to indicate tcp conn closedMike Christie2009-09-051-0/+1
| | | | | | | | | | | If a target closed the connection, we will detect it in the state_changed or data_ready callout. This adds a new conn error value to use for this problem, so it is not confused with when the initiator throws a conn error and drops the connection. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] scsi_dh: add the interface scsi_dh_set_params()Chandra Seetharaman2009-08-222-0/+6
| | | | | | | | | | | | | | | | | | | | | When we moved the device handler functionality from dm layer to SCSI layer we dropped the parameter functionality. This path adds an interface to scsi dh layer to set device handler parameters. Basically, multipath layer need to create a string with all the parameters and call scsi_dh_set_params() after it called scsi_dh_attach() on a device. If a device handler provides such an interface it will handle the parameters as it expects them. Reported-by: Eddie Williams <Eddie.Williams@steeleye.com> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Tested-by: Eddie Williams <Eddie.Williams@steeleye.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libfc: Remove FC_FRAME_SG_LEN in fc_fcp_send_dataYi Zou2009-08-221-7/+0
| | | | | | | | | | | | | | | | FC_FRAME_SG_LEN is 4 which is too small when offload is enabled. Actually, the WARN_ON() in fc_fcp_send_data() should be: WARN_ON(skb_shinfo(fp_skb(fp))->nr_frags > MAX_SKB_FRAGS); But since we will not get anything more than 64K anyway, so there is no need to do this anyway here. Therefore, I am getting rid of FC_FRAME_SG_LEN here and the WARN_ON here. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] fcoe, fnic, libfc: modifies current code paths to use EM anchor listVasu Dev2009-08-221-40/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modifies current code to use EM anchor list in EM allocation, EM free, EM reset, exch allocation and exch lookup code paths. 1. Modifies fc_exch_mgr_alloc to accept EM match function and then have allocated EM added to the lport using fc_exch_mgr_add API while also updating EM kref for newly added EM. 2. Updates fc_exch_mgr_free API to accept only lport pointer instead EM and then have this API free all EMs of the lport from EM anchor list. 3. Removes single lport pointer link from the EM, which was used in associating lport pointer in newly allocated exchange. Instead have lport pointer passed along new exchange allocation call path and then store passed lport pointer in newly allocated exchange, this will allow a single EM instance to be used across more than one lport and used in EM reset to reset only lport specific exchanges. 4. Modifies fc_exch_mgr_reset to reset all EMs from the EM anchor list of the lport, adds additional exch lport pointer (ep->lp) check for shared EM case to reset exchange specific to a lport requested reset. 5. Updates exch allocation API fc_exch_alloc to use EM anchor list and its anchor match func pointer. The fc_exch_alloc will walk the list of EMs until it finds a match, a match will be either null match func pointer or call to match function returning true value. 6. Updates fc_exch_recv to accept incoming frame on local port using only lport pointer and frame pointer without specifying EM instance of incoming frame. Instead modified fc_exch_recv to locate EM for the incoming frame by matching xid of incoming frame against a EM xid range. This change was required to use EM list in libfc Rx path and after this change the lport fc_exch_mgr pointer emp is not needed anymore, so removed emp pointer. 7. Updates fnic for removed lport emp pointer and above modified libfc APIs fc_exch_recv, fc_exch_mgr_alloc and fc_exch_mgr_free. 8. Removes exch_get and exch_put from libfc_function_template as these are no longer needed with EM anchor list and its match function use. Also removes its default function fc_exch_get. A defect this patch introduced regarding the libfc initialization order in the fnic driver was fixed by Joe Eykholt <jeykholt@cisco.com>. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libfc: Remove the FC_EM_DBG macroRobert Love2009-08-221-6/+0
| | | | | | | | | | | | | | | | | Currently there is a 1:1 relationship between the lport and exchange manager. This macro takes an EM as an argument and determines the lport from it. However, later patches will use an EM list per lport, so we will no longer have this 1:1 relationship- this macro must change. The FC_EM_DBG macro is rarely used. There are four callers, two can use FC_LPORT_DBG instead and two can be removed since they're not necessary. This patch makes those changes and removes the macro. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] fcoe, libfc: adds exchange manager(EM) anchor list per lport and ↵Vasu Dev2009-08-221-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | related APIs Adds EM list using a anchor struct fc_exch_mgr_anchor, anchor is used to allow same EM instance sharing across more than one lport on a eth device, this implementation is per discussed design posted at http://www.open-fcoe.org/pipermail/devel/2009-June/002566.html. The shared EM is required for multiple lports on eth device when using multiple VLANs or NPIV. Adds fc_exch_mgr_add API to add a EM to the lport and fc_exch_mgr_del API to delete previously added EM. Also adds function fc_exch_mgr_destroy() to destroy allocated EM. The kref is added to the EM to keep track of EM usage count, the EM is destroyed when no longer in use upon kref reaching to zero. The caller can specify match function to fc_exch_mgr_add, this will be used in determining exchange allocation from its EM or not. Moved calling of fcoe_em_config below fcoe_libfc_config calling, so that list head lp->ema_list is initialized before configuring EM. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libfc: rename rport state "NONE" to "DELETE".Joe Eykholt2009-08-221-1/+1
| | | | | | | | | | | | | | | State RPORT_ST_NONE was intented to be an invalid state (0), never used. This was a misguided attempt to be sure it was always initialized. Having an extra state meaning nothing requires switch statements to have a case covering that state. State NONE has been used instead to mean the remote port is being deleted. Changing the name to RPORT_ST_DELETE. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libfc: rename lport NONE state to DISABLEDJoe Eykholt2009-08-221-1/+1
| | | | | | | | | | | | The state NONE was meant to be invalid, but has been used as the initial state. Rename it to be DISABLED, as more descriptive. Further patches will make it the like the RESET state, except it won't transition to FLOGI until fc_lport_fabric_login() is called. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libfc: change debug messages to give host number.Joe Eykholt2009-08-221-16/+20
| | | | | | | | | | | | | | | | | | | | | | | libfc debug messages currently show 'lport: <fc-id>:' wher <fc-id> is the hex assigned port-id. When the lport is logged off, that will be zero, so its hard to distinguish which instance is involved. The FC-ID can change if the port is re-patched or changes VSANs. Two lports may even have the same FC-ID if connected to isolated SANs. Change the debug messages to print the SCSI host number "hostN:", which will not change for the life of the lport. Still show the FC_ID on lport messages. Also, add a macro to FC_RPORT_ID_DBG for rport debugging where there's no rdata structure involved. It takes the lport and port_id as parameters. Use this in fc_rport_recv_plogi_req() and fc_rport_recv_logo_req(). Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libfc: remove extra semicolons from debug macrosJoe Eykholt2009-08-221-10/+10
| | | | | | | | | | This is unlikely to cause any problems, but the libfc debug macros introduce extra undesirable semicolons. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] scsi_dh: Reference count scsi_dh_attachChandra Seetharaman2009-08-221-0/+2
| | | | | | | | | | | | | | Problem reported: http://marc.info/?l=dm-devel&m=124585978305866&w=2 scsi_dh does not do a refernce count for attach/detach, and this affects the way it is supposed to work with multipath when a device is not in the dev_list of the hardware handler. This patch adds a reference count that counts each attach. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* sd, sr: fix Driver 'sd' needs updating messageHannes Reinecke2009-06-211-0/+1
| | | | | | | | | | | | If a SCSI ULD driver sets blk_queue_prep_rq(), it should clean it up itself on remove(), and not from the bus callbacks. This removes the need to hook into bus->remove(), which should not be used at the same time as driver->remove(). [jejb: fix sdkp initialisation problem due to mismerge] Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* libfc: Add runtime debugging with debug_logging module parameterRobert Love2009-06-212-13/+66
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds the /sys/module/libfc/parameters/debug_logging file to sysfs as a module parameter. It accepts an integer bitmask for logging. Currently it supports: bit LSB 0 = general libfc debugging 1 = lport debugging 2 = disc debugging 3 = rport debugging 4 = fcp debugging 5 = EM debugging 6 = exch/seq debugging 7 = scsi logging (mostly error handling) the other bits are not used at this time. The patch converts all of the libfc source files to use these new macros and removes the old FC_DBG macro. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* libiscsi: don't run scsi eh if iscsi task is making progressMike Christie2009-06-211-0/+4
| | | | | | | | If we are sending or receiving data for the task successfully do not run the scsi eh, because we know the task is making progress. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2009-06-175-2/+389
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: [SCSI] aic79xx: make driver respect nvram for IU and QAS settings [SCSI] don't attach ULD to Dell Universal Xport [SCSI] lpfc 8.3.3 : Update driver version to 8.3.3 [SCSI] lpfc 8.3.3 : Add support for Target Reset handler entrypoint [SCSI] lpfc 8.3.3 : Fix a couple of spin_lock and memory issues and a crash [SCSI] lpfc 8.3.3 : FC/FCOE discovery fixes [SCSI] lpfc 8.3.3 : Fix various SLI-3 vs SLI-4 differences [SCSI] qla2xxx: Resolve a performance issue in interrupt [SCSI] cnic, bnx2i: Fix build failure when CONFIG_PCI is not set. [SCSI] nsp_cs: time_out reaches -1 [SCSI] qla2xxx: fix printk format warnings [SCSI] ncr53c8xx: div reaches -1 [SCSI] compat: don't perform unneeded copy in sg_io code [SCSI] zfcp: Update FC pass-through support [SCSI] zfcp: Add FC pass-through support [SCSI] FC Pass Thru support
| * [SCSI] aic79xx: make driver respect nvram for IU and QAS settingsJames Bottomley2009-06-151-0/+4
| | | | | | | | | | | | | | | | | | | | This patch allows the Adaptec firmware to pass on its values for Packetize and QAS. To do this, the settings max_iu and max_qas have been introduced into the SPI transport class and populated from the adaptec NVram tables. Domain validation in the SPI transport class will respect the max settings when configuring to the highest possible speed for testing. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] FC Pass Thru supportJames Smart2009-06-124-2/+385
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Attached is the ELS/CT pass-thru patch for the FC Transport. The patch creates a generic framework that lays on top of bsg and the SGIO v4 ioctl in order to pass transaction requests to LLDD's. The interface supports the following operations: On an fc_host basis: Request login to the specified N_Port_ID, creating an fc_rport. Request logout of the specified N_Port_ID, deleting an fc_rport Send ELS request to specified N_Port_ID w/o requiring a login, and wait for ELS response. Send CT request to specified N_Port_ID and wait for CT response. Login is required, but LLDD is allowed to manage login and decide whether it stays in place after the request is satisfied. Vendor-Unique request. Allows a LLDD-specific request to be passed to the LLDD, and the passing of a response back to the application. On an fc_rport basis: Send ELS request to nport and wait for ELS response. Send CT request to nport and wait for CT response. The patch also exports several headers from include/scsi such that they can be available to user-space applications: include/scsi/scsi.h include/scsi/scsi_netlink.h include/scsi/scsi_netlink_fc.h include/scsi/scsi_bsg_fc.h For further information, refer to the last RFC: http://marc.info/?l=linux-scsi&m=123436574018579&w=2 Note: Documentation is still spotty and will be added later. [bharrosh@panasas.com: update for new block API] Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* | Merge branch 'master' of ↵David S. Miller2009-06-1510-19/+156
|\ \ | |/ | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/scsi/fcoe/fcoe.c net/core/drop_monitor.c net/core/net-traces.c
| * [SCSI] Merge branch 'linus'James Bottomley2009-06-121-1/+1
| |\ | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/message/fusion/mptsas.c fixed up conflict between req->data_len accessors and mptsas driver updates. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| | * Merge branch 'for-2.6.31' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2009-06-111-1/+1
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits) block: add request clone interface (v2) floppy: fix hibernation ramdisk: remove long-deprecated "ramdisk=" boot-time parameter fs/bio.c: add missing __user annotation block: prevent possible io_context->refcount overflow Add serial number support for virtio_blk, V4a block: Add missing bounce_pfn stacking and fix comments Revert "block: Fix bounce limit setting in DM" cciss: decode unit attention in SCSI error handling code cciss: Remove no longer needed sendcmd reject processing code cciss: change SCSI error handling routines to work with interrupts enabled. cciss: separate error processing and command retrying code in sendcmd_withirq_core() cciss: factor out fix target status processing code from sendcmd functions cciss: simplify interface of sendcmd() and sendcmd_withirq() cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code cciss: Use schedule_timeout_uninterruptible in SCSI error handling code block: needs to set the residual length of a bidi request Revert "block: implement blkdev_readpages" block: Fix bounce limit setting in DM Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt ... Manually fix conflicts with tracing updates in: block/blk-sysfs.c drivers/ide/ide-atapi.c drivers/ide/ide-cd.c drivers/ide/ide-floppy.c drivers/ide/ide-tape.c include/trace/events/block.h kernel/trace/blktrace.c
| | | * Merge branch 'master' into for-2.6.31Jens Axboe2009-05-224-25/+75
| | | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/block/hd.c drivers/block/mg_disk.c Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| | | * | block: convert to pos and nr_sectors accessorsTejun Heo2009-05-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
OpenPOWER on IntegriCloud