summaryrefslogtreecommitdiffstats
path: root/include/net/if_inet6.h
Commit message (Collapse)AuthorAgeFilesLines
* ipv6: move DAD and addrconf_verify processing to workqueueHannes Frederic Sowa2014-03-281-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | addrconf_join_solict and addrconf_join_anycast may cause actions which need rtnl locked, especially on first address creation. A new DAD state is introduced which defers processing of the initial DAD processing into a workqueue. To get rtnl lock we need to push the code paths which depend on those calls up to workqueues, specifically addrconf_verify and the DAD processing. (v2) addrconf_dad_failure needs to be queued up to the workqueue, too. This patch introduces a new DAD state and stop the DAD processing in the workqueue (this is because of the possible ipv6_del_addr processing which removes the solicited multicast address from the device). addrconf_verify_lock is removed, too. After the transition it is not needed any more. As we are not processing in bottom half anymore we need to be a bit more careful about disabling bottom half out when we lock spin_locks which are also used in bh. Relevant backtrace: [ 541.030090] RTNL: assertion failed at net/core/dev.c (4496) [ 541.031143] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 3.10.33-1-amd64-vyatta #1 [ 541.031145] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 541.031146] ffffffff8148a9f0 000000000000002f ffffffff813c98c1 ffff88007c4451f8 [ 541.031148] 0000000000000000 0000000000000000 ffffffff813d3540 ffff88007fc03d18 [ 541.031150] 0000880000000006 ffff88007c445000 ffffffffa0194160 0000000000000000 [ 541.031152] Call Trace: [ 541.031153] <IRQ> [<ffffffff8148a9f0>] ? dump_stack+0xd/0x17 [ 541.031180] [<ffffffff813c98c1>] ? __dev_set_promiscuity+0x101/0x180 [ 541.031183] [<ffffffff813d3540>] ? __hw_addr_create_ex+0x60/0xc0 [ 541.031185] [<ffffffff813cfe1a>] ? __dev_set_rx_mode+0xaa/0xc0 [ 541.031189] [<ffffffff813d3a81>] ? __dev_mc_add+0x61/0x90 [ 541.031198] [<ffffffffa01dcf9c>] ? igmp6_group_added+0xfc/0x1a0 [ipv6] [ 541.031208] [<ffffffff8111237b>] ? kmem_cache_alloc+0xcb/0xd0 [ 541.031212] [<ffffffffa01ddcd7>] ? ipv6_dev_mc_inc+0x267/0x300 [ipv6] [ 541.031216] [<ffffffffa01c2fae>] ? addrconf_join_solict+0x2e/0x40 [ipv6] [ 541.031219] [<ffffffffa01ba2e9>] ? ipv6_dev_ac_inc+0x159/0x1f0 [ipv6] [ 541.031223] [<ffffffffa01c0772>] ? addrconf_join_anycast+0x92/0xa0 [ipv6] [ 541.031226] [<ffffffffa01c311e>] ? __ipv6_ifa_notify+0x11e/0x1e0 [ipv6] [ 541.031229] [<ffffffffa01c3213>] ? ipv6_ifa_notify+0x33/0x50 [ipv6] [ 541.031233] [<ffffffffa01c36c8>] ? addrconf_dad_completed+0x28/0x100 [ipv6] [ 541.031241] [<ffffffff81075c1d>] ? task_cputime+0x2d/0x50 [ 541.031244] [<ffffffffa01c38d6>] ? addrconf_dad_timer+0x136/0x150 [ipv6] [ 541.031247] [<ffffffffa01c37a0>] ? addrconf_dad_completed+0x100/0x100 [ipv6] [ 541.031255] [<ffffffff8105313a>] ? call_timer_fn.isra.22+0x2a/0x90 [ 541.031258] [<ffffffffa01c37a0>] ? addrconf_dad_completed+0x100/0x100 [ipv6] Hunks and backtrace stolen from a patch by Stephen Hemminger. Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-01-181-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c net/ipv4/tcp_metrics.c Overlapping changes between the "don't create two tcp metrics objects with the same key" race fix in net and the addition of the destination address in the lookup key in net-next. Minor overlapping changes in bnx2x driver. Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv6: simplify detection of first operational link-local address on interfaceHannes Frederic Sowa2014-01-171-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 1ec047eb4751e3 ("ipv6: introduce per-interface counter for dad-completed ipv6 addresses") I build the detection of the first operational link-local address much to complex. Additionally this code now has a race condition. Replace it with a much simpler variant, which just scans the address list when duplicate address detection completes, to check if this is the first valid link local address and send RS and MLD reports then. Fixes: 1ec047eb4751e3 ("ipv6: introduce per-interface counter for dad-completed ipv6 addresses") Reported-by: Jiri Pirko <jiri@resnulli.us> Cc: Flavio Leitner <fbl@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Flavio Leitner <fbl@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6 addrconf: extend ifa_flags to u32Jiri Pirko2013-12-061-1/+1
|/ | | | | | | | | There is no more space in u8 ifa_flags. So do what davem suffested and add another netlink attr called IFA_FLAGS for carry more flags. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Thomas Haller <thaller@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Remove privacy config option.David S. Miller2013-10-281-4/+1
| | | | | | | | The code for privacy extentions is very mature, and making it configurable only gives marginal memory/code savings in exchange for obfuscation and hard to read code via CPP ifdef'ery. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ipv6: mld: fix v1/v2 switchback timeout to rfc3810, 9.12.Daniel Borkmann2013-09-041-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i) RFC3810, 9.2. Query Interval [QI] says: The Query Interval variable denotes the interval between General Queries sent by the Querier. Default value: 125 seconds. [...] ii) RFC3810, 9.3. Query Response Interval [QRI] says: The Maximum Response Delay used to calculate the Maximum Response Code inserted into the periodic General Queries. Default value: 10000 (10 seconds) [...] The number of seconds represented by the [Query Response Interval] must be less than the [Query Interval]. iii) RFC3810, 9.12. Older Version Querier Present Timeout [OVQPT] says: The Older Version Querier Present Timeout is the time-out for transitioning a host back to MLDv2 Host Compatibility Mode. When an MLDv1 query is received, MLDv2 hosts set their Older Version Querier Present Timer to [Older Version Querier Present Timeout]. This value MUST be ([Robustness Variable] times (the [Query Interval] in the last Query received)) plus ([Query Response Interval]). Hence, on *default* the timeout results in: [RV] = 2, [QI] = 125sec, [QRI] = 10sec [OVQPT] = [RV] * [QI] + [QRI] = 260sec Having that said, we currently calculate [OVQPT] (here given as 'switchback' variable) as ... switchback = (idev->mc_qrv + 1) * max_delay RFC3810, 9.12. says "the [Query Interval] in the last Query received". In section "9.14. Configuring timers", it is said: This section is meant to provide advice to network administrators on how to tune these settings to their network. Ambitious router implementations might tune these settings dynamically based upon changing characteristics of the network. [...] iv) RFC38010, 9.14.2. Query Interval: The overall level of periodic MLD traffic is inversely proportional to the Query Interval. A longer Query Interval results in a lower overall level of MLD traffic. The value of the Query Interval MUST be equal to or greater than the Maximum Response Delay used to calculate the Maximum Response Code inserted in General Query messages. I assume that was why switchback is calculated as is (3 * max_delay), although this setting seems to be meant for routers only to configure their [QI] interval for non-default intervals. So usage here like this is clearly wrong. Concluding, the current behaviour in IPv6's multicast code is not conform to the RFC as switch back is calculated wrongly. That is, it has a too small value, so MLDv2 hosts switch back again to MLDv2 way too early, i.e. ~30secs instead of ~260secs on default. Hence, introduce necessary helper functions and fix this up properly as it should be. Introduced in 06da92283 ("[IPV6]: Add MLDv2 support."). Credits to Hannes Frederic Sowa who also had a hand in this as well. Also thanks to Hangbin Liu who did initial testing. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: David Stevens <dlstevens@us.ibm.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: resend MLD report if a link-local address completes DADHannes Frederic Sowa2013-06-281-0/+2
| | | | | | | | | | | | | | | | | | | | RFC3590/RFC3810 specifies we should resend MLD reports as soon as a valid link-local address is available. We now use the valid_ll_addr_cnt to check if it is necessary to resend a new report. Changes since Flavio Leitner's version: a) adapt for valid_ll_addr_cnt b) resend first reports directly in the path and just arm the timer for mc_qrv-1 resends. Reported-by: Flavio Leitner <fleitner@redhat.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Stevens <dlstevens@us.ibm.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: introduce per-interface counter for dad-completed ipv6 addressesHannes Frederic Sowa2013-06-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To reduce the number of unnecessary router solicitations, MLDv2 and IGMPv3 messages we need to track the number of valid (as in non-optimistic, no-dad-failed and non-tentative) link-local addresses. Therefore, this patch implements a valid_ll_addr_cnt in struct inet6_dev. We now only emit router solicitations if the first link-local address finishes duplicate address detection. The changes for MLDv2 and IGMPv3 are in a follow-up patch. While there, also simplify one if statement(one minor nit I made in one of my previous patches): if (!...) do(); else return; <<into>> if (...) return; do(); Cc: Flavio Leitner <fbl@redhat.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David Stevens <dlstevens@us.ibm.com> Suggested-by: David Stevens <dlstevens@us.ibm.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: split duplicate address detection and router solicitation timerHannes Frederic Sowa2013-06-251-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | This patch splits the timers for duplicate address detection and router solicitations apart. The router solicitations timer goes into inet6_dev and the dad timer stays in inet6_ifaddr. The reason behind this patch is to reduce the number of unneeded router solicitations send out by the host if additional link-local addresses are created. Currently we send out RS for every link-local address on an interface. If the RS timer fires we pick a source address with ipv6_get_lladdr. This change could hurt people adding additional link-local addresses and specifying these addresses in the radvd clients section because we no longer guarantee that we use every ll address as source address in router solicitations. Cc: Flavio Leitner <fleitner@redhat.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Stevens <dlstevens@us.ibm.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Reviewed-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ipv6: remove 'next' member from inet6_devDaniel Borkmann2013-05-201-1/+0
| | | | | | | | The next pointer within the inet6_dev structure seems not to be used anywhere. So just remove it. Tested with allmodconfig on x86_64. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: add support of peer addressNicolas Dichtel2013-05-191-0/+1
| | | | | | | | | | | | | | | | | This patch adds the support of peer address for IPv6. For example, it is possible to specify the remote end of a 6inY tunnel. This was already possible in IPv4: ip addr add ip1 peer ip2 dev dev1 The peer address is specified with IFA_ADDRESS and the local address with IFA_LOCAL (like explained in include/uapi/linux/if_addr.h). Note that the API is not changed, because before this patch, it was not possible to specify two different addresses in IFA_LOCAL and IFA_REMOTE. There is a small change for the dump: if the peer is different from ::, IFA_ADDRESS will contain the peer address instead of the local address. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ipv6: only invalidate previously tokenized addressesDaniel Borkmann2013-04-091-0/+2
| | | | | | | | | | | | | | | | Instead of invalidating all IPv6 addresses with global scope when one decides to use IPv6 tokens, we should only invalidate previous tokens and leave the rest intact until they expire eventually (or are intact forever). For doing this less greedy approach, we're adding a bool at the end of inet6_ifaddr structure instead, for two reasons: i) per-inet6_ifaddr flag space is already used up, making it wider might not be a good idea, since ii) also we do not necessarily need to export this information into user space. Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ipv6: add tokenized interface identifier supportDaniel Borkmann2013-04-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for IPv6 tokenized IIDs, that allow for administrators to assign well-known host-part addresses to nodes whilst still obtaining global network prefix from Router Advertisements. It is currently in draft status. The primary target for such support is server platforms where addresses are usually manually configured, rather than using DHCPv6 or SLAAC. By using tokenised identifiers, hosts can still determine their network prefix by use of SLAAC, but more readily be automatically renumbered should their network prefix change. [...] The disadvantage with static addresses is that they are likely to require manual editing should the network prefix in use change. If instead there were a method to only manually configure the static identifier part of the IPv6 address, then the address could be automatically updated when a new prefix was introduced, as described in [RFC4192] for example. In such cases a DNS server might be configured with such a tokenised interface identifier of ::53, and SLAAC would use the token in constructing the interface address, using the advertised prefix. [...] http://tools.ietf.org/html/draft-chown-6man-tokenised-ipv6-identifiers-02 The implementation is partially based on top of Mark K. Thompson's proof of concept. However, it uses the Netlink interface for configuration resp. data retrival, so that it can be easily extended in future. Successfully tested by myself. Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: delete all instances of special processing for token ringPaul Gortmaker2012-05-151-54/+0
| | | | | | | | | | | | | We are going to delete the Token ring support. This removes any special processing in the core networking for token ring, (aside from net/tr.c itself), leaving the drivers and remaining tokenring support present but inert. The mass removal of the drivers and net/tr.c will be in a separate commit, so that the history of these files that we still care about won't have the giant deletion tied into their history. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* net: cleanup unsigned to unsigned intEric Dumazet2012-04-151-1/+1
| | | | | | | Use of "unsigned int" is preferred to bare "unsigned" in net tree. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: updates to privacy addresses per RFC 4941.Lorenzo Colitti2011-08-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | Update the code to handle some of the differences between RFC 3041 and RFC 4941, which obsoletes it. Also a couple of janitorial fixes. - Allow router advertisements to increase the lifetime of temporary addresses. This was not allowed by RFC 3041, but is specified by RFC 4941. It is useful when RA lifetimes are lower than TEMP_{VALID,PREFERRED}_LIFETIME: in this case, the previous code would delete or deprecate addresses prematurely. - Change the default of MAX_RETRY to 3 per RFC 4941. - Add a comment to clarify that the preferred and valid lifetimes in inet6_ifaddr are relative to the timestamp. - Shorten lines to 80 characters in a couple of places. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: reduce per device ICMP mib sizesEric Dumazet2011-05-191-2/+2
| | | | | | | | | | | | | | | | | | | | ipv6 has per device ICMP SNMP counters, taking too much space because they use percpu storage. needed size per device is : (512+4)*sizeof(long)*number_of_possible_cpus*2 On a 32bit kernel, 16 possible cpus, this wastes more than 64kbytes of memory per ipv6 enabled network device, taken in vmalloc pool. Since ICMP messages are rare, just use shared counters (atomic_long_t) Per network space ICMP counters are still using percpu memory, we might also convert them to shared counters in a future patch. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove __KERNEL__ cpp checks from include/netDavid S. Miller2011-04-241-3/+0
| | | | | | | | | | | These header files are never installed to user consumption, so any __KERNEL__ cpp checks are superfluous. Projects should also not copy these files into their userland utility sources and try to use them there. If they insist on doing so, the onus is on them to sanitize the headers as needed. Signed-off-by: David S. Miller <davem@davemloft.net>
* inet: constify ip headers and in6_addrEric Dumazet2011-04-221-2/+2
| | | | | | | | Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: gre: provide multicast mappings for ipv4 and ipv6Timo Teräs2011-03-301-0/+16
| | | | | | | | | | | | | | | | | | | | My commit 6d55cb91a0020ac0 (gre: fix hard header destination address checking) broke multicast. The reason is that ip_gre used to get ipgre_header() calls with zero destination if we have NOARP or multicast destination. Instead the actual target was decided at ipgre_tunnel_xmit() time based on per-protocol dissection. Instead of allowing the "abuse" of ->header() calls with invalid destination, this creates multicast mappings for ip_gre. This also fixes "ip neigh show nud noarp" to display the proper multicast mappings used by the gre device. Reported-by: Doug Kehn <rdkehn@yahoo.com> Signed-off-by: Timo Teräs <timo.teras@iki.fi> Acked-by: Doug Kehn <rdkehn@yahoo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: mcast: RCU conversionEric Dumazet2010-11-241-1/+2
| | | | | | | | | | | | | ipv6_sk_mc_lock rwlock becomes a spinlock. readers (inet6_mc_check()) now takes rcu_read_lock() instead of read lock. Writers dont need to disable BH anymore. struct ipv6_mc_socklist objects are reclaimed after one RCU grace period. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Replace inet6_ifaddr->dead with stateHerbert Xu2010-05-181-2/+10
| | | | | | | | | | | This patch replaces the boolean dead flag on inet6_ifaddr with a state enum. This allows us to roll back changes when deleting an address according to whether DAD has completed or not. This patch only adds the state field and does not change the logic. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: convert idev_list to list macrosstephen hemminger2010-03-201-3/+3
| | | | | | | | Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* IPv6: convert addrconf hash list to RCUstephen hemminger2010-03-201-0/+1
| | | | | | | | | | | Convert from reader/writer lock to RCU and spinlock for addrconf hash list. Adds an additional helper macro for hlist_for_each_entry_continue_rcu to handle the continue case. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: convert addrconf list to hliststephen hemminger2010-03-201-1/+1
| | | | | | | | | | | Using hash list macros, simplifies code and helps later RCU. This patch includes some initialization that is not strictly necessary, since an empty hlist node/list is all zero; and list is in BSS and node is allocated with kzalloc. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: convert temporary address list to list macrosstephen hemminger2010-03-201-2/+2
| | | | | | | Use list macros instead of open coded linked list. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* IPv6: convert mc_lock to spinlockStephen Hemminger2010-02-171-1/+1
| | | | | | | Only used for writing, so convert to spinlock Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: cleanup include/netEric Dumazet2009-11-041-16/+8
| | | | | | | | | | | | | | | This cleanup patch puts struct/union/enum opening braces, in first line to ease grep games. struct something { becomes : struct something { Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: reorder struct inet6_ifaddr to remove padding on 64 bit buildsRichard Kennedy2009-03-211-2/+3
| | | | | | | | | | reorder struct inet6_ifaddr to remove padding on 64 bit builds remove 8 bytes of padding so inet6_ifaddr becomes 192 bytes & fits into a smaller slab. Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: make struct ipv6_devconf staticAdrian Bunk2008-07-221-2/+0
| | | | | | | struct ipv6_devconf can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6 addrconf: Remove IFA_GLOBAL definition from include/net/if_inet6.h.Rami Rosen2008-06-121-1/+0
| | | | | | | | This patches removes IFA_GLOBAL definition from linux/include/net/if_inet6.h as it is unused. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
* [IPV6]: Reorg struct ifmcaddr6 to save some bytesArnaldo Carvalho de Melo2008-02-031-1/+1
| | | | | | | | | | | | | | | | | | | /home/acme/git/net-2.6/net/ipv6/mcast.c: struct ifmcaddr6 | -8 1 struct changed igmp6_group_dropped | -6 add_grec | -3 mld_ifc_timer_expire | -18 ip6_mc_add_src | -3 ip6_mc_del_src | -3 igmp6_group_added | -3 6 functions changed, 36 bytes removed, diff: -36 ipv6.ko: 6 functions changed, 36 bytes removed, diff: -36 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [INET6]: Reorganize struct inet6_dev to save 8 bytesArnaldo Carvalho de Melo2008-02-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | And make it a multiple of a 64 bytes, reducing cacheline trashing: Before: [acme@doppio net-2.6]$ pahole -C inet6_dev net/dccp/ipv6.o struct inet6_dev { <SNIP> long unsigned int mc_maxdelay; /* 48 8 */ unsigned char mc_qrv; /* 56 1 */ unsigned char mc_gq_running; /* 57 1 */ unsigned char mc_ifc_count; /* 58 1 */ /* XXX 5 bytes hole, try to pack */ /* --- cacheline 1 boundary (64 bytes) --- */ struct timer_list mc_gq_timer; /* 64 48 */ <SNIP> __u32 if_flags; /* 180 4 */ int dead; /* 184 4 */ u8 rndid[8]; /* 188 8 */ /* XXX 4 bytes hole, try to pack */ /* --- cacheline 3 boundary (192 bytes) was 8 bytes ago --- */ struct timer_list regen_timer; /* 200 48 */ <SNIP> /* size: 456, cachelines: 8 */ /* sum members: 447, holes: 2, sum holes: 9 */ /* last cacheline: 8 bytes */ }; After: net-2.6/net/ipv6/af_inet6.c: struct inet6_dev | -8 1 struct changed Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* IPoIB: improve IPv4/IPv6 to IB mcast mapping functionsRolf Manderscheid2008-01-251-4/+7
| | | | | | | | | | | | | | | | An IPoIB subnet on an IB fabric that spans multiple IB subnets can't use link-local scope in multicast GIDs. The existing routines that map IP/IPv6 multicast addresses into IB link-level addresses hard-code the scope to link-local, and they also leave the partition key field uninitialised. This patch adds a parameter (the link-level broadcast address) to the mapping routines, allowing them to initialise both the scope and the P_Key appropriately, and fixes up the call sites. The next step will be to add a way to configure the scope for an IPoIB interface. Signed-off-by: Rolf Manderscheid <rvm@obsidianresearch.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* [IPV6]: Add ICMPMsgStats MIB (RFC 4293) [rev 2]David L Stevens2007-10-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Background: RFC 4293 deprecates existing individual, named ICMP type counters to be replaced with the ICMPMsgStatsTable. This table includes entries for both IPv4 and IPv6, and requires counting of all ICMP types, whether or not the machine implements the type. These patches "remove" (but not really) the existing counters, and replace them with the ICMPMsgStats tables for v4 and v6. It includes the named counters in the /proc places they were, but gets the values for them from the new tables. It also counts packets generated from raw socket output (e.g., OutEchoes, MLD queries, RA's from radvd, etc). Changes: 1) create icmpmsg_statistics mib 2) create icmpv6msg_statistics mib 3) modify existing counters to use these 4) modify /proc/net/snmp to add "IcmpMsg" with all ICMP types listed by number for easy SNMP parsing 5) modify /proc/net/snmp printing for "Icmp" to get the named data from new counters. [new to 2nd revision] 6) support per-interface ICMP stats 7) use common macro for per-device stat macros Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Per-interface statistics support.YOSHIFUJI Hideaki2006-12-021-0/+1
| | | | | | For IP MIB (RFC4293). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
* [IPV6] ADDRCONF: Convert addrconf_lock to RCU.YOSHIFUJI Hideaki2006-09-221-0/+1
| | | | | Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: ADDRCONF: Use our standard algorithm for randomized ifid.YOSHIFUJI Hideaki2006-03-201-3/+0
| | | | | | | | | | | | RFC 3041 describes an algorithm to generate random interface identifier. In RFC 3041bis, it is allowed to use different algorithm than one described in RFC 3041. So, let's use our standard pseudo random algorithm to simplify our implementation. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6] mcast: Fix multiple issues in MLDv2 reports.David L Stevens2005-12-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The below "jumbo" patch fixes the following problems in MLDv2. 1) Add necessary "ntohs" to recent "pskb_may_pull" check [breaks all nonzero source queries on little-endian (!)] 2) Add locking to source filter list [resend of prior patch] 3) fix "mld_marksources()" to a) send nothing when all queried sources are excluded b) send full exclude report when source queried sources are not excluded c) don't schedule a timer when there's nothing to report NOTE: RFC 3810 specifies the source list should be saved and each source reported individually as an IS_IN. This is an obvious DOS path, requiring the host to store and then multicast as many sources as are queried (e.g., millions...). This alternative sends a full, relevant report that's limited to number of sources present on the machine. 4) fix "add_grec()" to send empty-source records when it should The original check doesn't account for a non-empty source list with all sources inactive; the new code keeps that short-circuit case, and also generates the group header with an empty list if needed. 5) fix mca_crcount decrement to be after add_grec(), which needs its original value These issues (other than item #1 ;-) ) were all found by Yan Zheng, much thanks! Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Defer IPv6 device initialization until the link becomes ready.YOSHIFUJI Hideaki2005-12-211-0/+1
| | | | | | | | NETDEV_UP might be sent even if the link attached to the interface was not ready. DAD does not make sense in such case, so we won't do so. After interface Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-161-0/+285
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
OpenPOWER on IntegriCloud