summaryrefslogtreecommitdiffstats
path: root/include/linux/usb
Commit message (Collapse)AuthorAgeFilesLines
* usb: ch9: fix up MaxStreams helperFelipe Balbi2012-01-041-1/+19
| | | | | | | | | | | | | | | | | | | | | According to USB 3.0 Specification Table 9-22, if bmAttributes [4:0] are set to zero, it means "no streams supported", but the way this helper was defined on Linux, we will *always* have one stream which might cause several problems. For example on DWC3, we would tell the controller endpoint has streams enabled and yet start transfers with Stream ID set to 0, which would goof up the host side. While doing that, convert the macro to an inline function due to the different checks we now need. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'for-gadget/next' of ↵Greg Kroah-Hartman2011-12-221-1/+11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next * 'for-gadget/next' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (24 commits) usb: dwc3: gadget: add support for SG lists usb: dwc3: gadget: don't force 'LST' always usb: dwc3: gadget: don't return anything on prepare trbs usb: dwc3: gadget: re-factor dwc3_prepare_trbs() usb: gadget: introduce support for sg lists usb: renesas: pipe: convert a long if into a XOR operation usb: gadget: remove useless depends on Kconfig usb: gadget: s3c-hsudc: remove the_controller global usb: gadget: s3c-hsudc: use release_mem_region instead of release_resource usb: gadget: s3c-hsudc: Add regulator handling usb: gadget: s3c-hsudc: use udc_start and udc_stop functions usb: gadget: s3c-hsudc: move device registration to probe usb: gadget: s3c-hsudc: add missing otg_put_transceiver in probe usb: gadget: s3c-hsudc: add __devinit to probe function usb: gadget: s3c-hsudc: move platform_data struct to global header USB: EHCI: Add Marvell Host Controller driver USB: OTG: add Marvell usb OTG driver support usb: gadget: mv_udc: drop ARCH dependency usb: gadget: mv_udc: fix bug in ep_dequeue usb: gadget: enlarge maxburst bit width. ...
| * usb: gadget: introduce support for sg listsFelipe Balbi2011-12-211-0/+10
| | | | | | | | | | | | | | | | | | | | | | Some controllers support scatter/gather transfers and that might be very useful for some gadget drivers. This means that we can make use of larger buffer allocations which means we will have less completion IRQs overtime, thus improving the perceived performance. Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: gadget: enlarge maxburst bit width.Yu Xu2011-12-191-1/+1
| | | | | | | | | | | | | | | | For super speed bulk transfer, the max burst size is 16, so that 4 bits of maxburst cannot store it. Signed-off-by: Yu Xu <yuxu@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | Merge branch 'for-next/gadget' of ↵Greg Kroah-Hartman2011-12-132-8/+16
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next * 'for-next/gadget' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (50 commits) usb: renesas_usbhs: show error reason on usbhsh_urb_enqueu() usb: renesas_usbhs: add force packet remove method usb: renesas_usbhs: care usb_hcd_giveback_urb() status usb: renesas_usbhs: add usbhsh_is_running() usb: renesas_usbhs: disable attch irq after device attached usb: renesas_usbhs: care pipe sequence usb: renesas_usbhs: add usbhs_pipe_attach() method usb: renesas_usbhs: add usbhsh_endpoint_detach_all() for error case usb: renesas_usbhs: modify device attach method usb: renesas_usbhs: pop packet when urb dequeued usb: renesas_usbhs: add lost error value when enqueue usb: gadget: mv_udc: replace some debug info usb: gadget: mv_udc: refine suspend/resume function usb: gadget: mv_udc: refine the clock relative code usb: gadget: mv_udc: disable ISR when stopped usb: gadget: mv_udc: add otg relative code usb: gadget: Use kcalloc instead of kzalloc to allocate array usb: renesas_usbhs: remove the_controller_link usb: renesas_usbhs: add test-mode support usb: renesas_usbhs: call usbhsg_queue_pop() when pipe disable. ...
| * usb: gadget: rename usb_gadget_driver::speed to max_speedMichal Nazarewicz2011-12-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit renames the “speed” field of the usb_gadget_driver structure to “max_speed”. This is so that to make it more apparent that the field represents the maximum speed gadget driver can support. This also make the field look more like fields with the same name in usb_gadget and usb_composite_driver structures. All of those represent the *maximal* speed given entity supports. After this commit, there are the following fields in various structures: * usb_gadget::speed - the current connection speed, * usb_gadget::max_speed - maximal speed UDC supports, * usb_gadget_driver::max_speed - maximal speed gadget driver supports, and * usb_composite_driver::max_speed - maximal speed composite gadget supports. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: gadget: replace usb_gadget::is_dualspeed with max_speedMichal Nazarewicz2011-12-121-5/+5
| | | | | | | | | | | | | | | | | | | | This commit replaces usb_gadget's is_dualspeed field with a max_speed field. [ balbi@ti.com : Fixed DWC3 driver ] Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: gadget: renesas_usbhs: add platform power control functionKuninori Morimoto2011-12-121-0/+8
| | | | | | | | | | Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: gadget: renesas_usbhs: tidyup the unit of detection_delayKuninori Morimoto2011-12-121-1/+1
| | | | | | | | | | | | | | detection_delay was assumed as msec Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | USB: Remove the duplicate definition of HUB_SET_DEPTHQinglin Ye2011-12-121-1/+0
| | | | | | | | | | | | | | | | | | | | | | The macro HUB_SET_DEPTH is defined twice in ch11.h (introduced by commit 0eadcc0 "usb: USB3.0 ch11 definitions" and dbe79bb "USB 3.0 Hub Changes"), so remove the duplicate one in the USB 2.0 part. Signed-off-by: Qinglin Ye <yestyle@gmail.com> Cc: John Youn <John.Youn@synopsys.com> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | USB: Adding #define in hub_configure() and hcd.c fileAman Deep2011-12-091-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is in succession of previous patch commit c8421147926fcacf53081a36438a0bed394da9f5 xHCI: Adding #define values used for hub descriptor Hub descriptors characteristics #defines values are added in hub_configure() in place of magic numbers as asked by Alan Stern. And the indentation for switch and case is changed to be same. Some #defines values are added in ch11.h for defining hub class protocols and used in hub.c and hcd.c in which magic values were used for hub class protocols. Signed-off-by: Aman Deep <amandeep3986@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | xHCI: Adding #define values used for hub descriptorAman Deep2011-11-261-5/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | xhci-hub used some numerical values for initialisation of root hub descriptors. #define values are addded in usb 2.0 hub specification file and these values are used for root hub characteristics initialisation. Also use some #defines in places where magic numbers are being used. Signed-off-by: Aman Deep <amandeep3986@gmail.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | USB: serial: add support for multiple read urbsJohan Hovold2011-11-151-1/+8
| | | | | | | | | | | | | | | | | | | | Add support for multiple read urbs to generic read implementation. Use a static array of two read urbs for now which is enough to get a 50% throughput increase in one test setup. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | USB: serial: remove write_urb_busy field from usb_serial_portJohan Hovold2011-11-151-2/+0
| | | | | | | | | | | | | | Remove no longer used write_urb_busy field from struct usb_serial_port. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | USB: Remove the SAW_IRQ hcd flagAlan Stern2011-11-141-2/+0
|/ | | | | | | | | | | | | | | The HCD_FLAG_SAW_IRQ flag was introduced in order to catch IRQ routing errors: If an URB was unlinked and the host controller hadn't gotten any IRQs, it seemed likely that the IRQs were directed to the wrong vector. This warning hasn't come up in many years, as far as I know; interrupt routing now seems to be well under control. Therefore there's no reason to keep the flag around any more. This patch (as1495) finally removes it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'v4l_for_linus' of ↵Linus Torvalds2011-10-311-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (348 commits) [media] pctv452e: Remove bogus code [media] adv7175: Make use of media bus pixel codes [media] media: vb2: fix incorrect return value [media] em28xx: implement VIDIOC_ENUM_FRAMESIZES [media] cx23885: Stop the risc video fifo before reconfiguring it [media] cx23885: Avoid incorrect error handling and reporting [media] cx23885: Avoid stopping the risc engine during buffer timeout [media] cx23885: Removed a spurious function cx23885_set_scale() [media] cx23885: v4l2 api compliance, set the audioset field correctly [media] cx23885: hook the audio selection functions into the main driver [media] cx23885: add generic functions for dealing with audio input selection [media] cx23885: fixes related to maximum number of inputs and range checking [media] cx23885: Initial support for the MPX-885 mini-card [media] cx25840: Ensure AUDIO6 and AUDIO7 trigger line-in baseband use [media] cx23885: Enable audio line in support from the back panel [media] cx23885: Allow the audio mux config to be specified on a per input basis [media] cx25840: Enable support for non-tuner LR1/LR2 audio inputs [media] cx23885: Name an internal i2c part and declare a bitfield by name [media] cx23885: Ensure VBI buffers timeout quickly - bugfix for vbi hangs during streaming [media] cx23885: remove channel dump diagnostics when a vbi buffer times out ... Fix up trivial conflicts in drivers/misc/altera-stapl/altera.c (header file rename vs add)
| * USB: export video.h to the includes available for userspaceLaurent Pinchart2011-09-231-0/+1
| | | | | | | | | | | | | | | | The uvcvideo extension unit API requires constants defined in the video.h header. Add it to the list of includes exported to userspace. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | Merge branch 'for-linus' of ↵Linus Torvalds2011-10-281-6/+11
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (549 commits) ALSA: hda - Fix ADC input-amp handling for Cx20549 codec ALSA: hda - Keep EAPD turned on for old Conexant chips ALSA: hda/realtek - Fix missing volume controls with ALC260 ASoC: wm8940: Properly set codec->dapm.bias_level ALSA: hda - Fix pin-config for ASUS W90V ALSA: hda - Fix surround/CLFE headphone and speaker pins order ALSA: hda - Fix typo ALSA: Update the sound git tree URL ALSA: HDA: Add new revision for ALC662 ASoC: max98095: Convert codec->hw_write to snd_soc_write ASoC: keep pointer to resource so it can be freed ASoC: sgtl5000: Fix wrong mask in some snd_soc_update_bits calls ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2 ASoC: da7210: Add support for line out and DAC ASoC: da7210: Add support for DAPM ALSA: hda/realtek - Fix DAC assignments of multiple speakers ASoC: Use SGTL5000_LINREG_VDDD_MASK instead of hardcoded mask value ASoC: Set sgtl5000->ldo in ldo_regulator_register ASoC: wm8996: Use SND_SOC_DAPM_AIF_OUT for AIF2 Capture ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 Capture ...
| * | USB: Add endpoint usage definitions to ch9.hDaniel Mack2011-09-141-6/+11
| |/ | | | | | | | | | | | | | | | | | | | | | | | | The endpoint usage field is described in the USB 2.0 specification, chapter 9.6.6. Also, move the sync type fields block down by some lines to reflect the fact that these are also stuffed in bmAttributes. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | usb: gadget: renesas_usbhs: support otg pin controlKuninori Morimoto2011-10-131-0/+5
| | | | | | | | | | | | | | | | | | | | some renesas_usbhs device is supporting OTG external device interface. In that device, it is necessary to control PWEN/EXTLP on DVSTCTR. This patch support it. But renesas_usbhs driver doesn't have OTG support for now. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: gadget: renesas_usbhs: add bus control functionsKuninori Morimoto2011-10-131-0/+7
| | | | | | | | | | | | | | this patch add DVSTCTR control function for HOST support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: gadget: renesas_usbhs: change usbhsc_bus_ctrl() to usbsc_set_buswait()Kuninori Morimoto2011-10-131-0/+2
| | | | | | | | | | | | | | | | | | renesas_usbhs will have register DVSTCTR control function for HOST support. This patch changes usbhsc_bus_ctrl() to usbsc_set_buswait(), to remove DVSTCTR access from it, Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: gadget: fix typo for default U1/U2 exit latenciesFelipe Balbi2011-10-131-2/+2
| | | | | | | | | | | | s/DEFULT/DEFAULT/, no functional changes. Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: gadget: r8a66597-udc: add support for SUDMACYoshihiro Shimoda2011-10-131-0/+60
| | | | | | | | | | | | | | | | | | SH7757 has a USB function with internal DMA controller (SUDMAC). This patch supports the SUDMAC. The SUDMAC is incompatible with general-purpose DMAC. So, it doesn't use dmaengine. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | USB: fix ehci alignment errorHarro Haan2011-10-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | The Kirkwood gave an unaligned memory access error on line 742 of drivers/usb/host/echi-hcd.c: "ehci->last_periodic_enable = ktime_get_real();" Signed-off-by: Harro Haan <hrhaan@gmail.com> Cc: stable <stable@kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | xHCI: set USB2 hardware LPMAndiry Xu2011-09-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | If the device pass the USB2 software LPM and the host supports hardware LPM, enable hardware LPM for the device to let the host decide when to put the link into lower power state. If hardware LPM is enabled for a port and driver wants to put it into suspend, it must first disable hardware LPM, resume the port into U0, and then suspend the port. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | usb: Provide usb_speed_string() functionMichal Nazarewicz2011-09-181-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In a few places in the kernel, the code prints a human-readable USB device speed (eg. "high speed"). This involves a switch statement sometimes wrapped around in ({ ... }) block leading to code repetition. To mitigate this issue, this commit introduces usb_speed_string() function, which returns a human-readable name of provided speed. It also changes a few places switch was used to use this new function. This changes a bit the way the speed is printed in few instances at the same time standardising it. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | usb: ch9: add function defines from ch9, USB 3.0 specSebastian Andrzej Siewior2011-08-221-0/+5
| | | | | | | | | | | | | | | | not to confuse with Table 9-7 in USB 2.0 spec Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | usb: add usb_endpoint_maxp() macrokuninori.morimoto.gx@renesas.com2011-08-221-0/+12
|/ | | | | Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'for-next' of ↵Greg Kroah-Hartman2011-07-082-0/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/balbi/usb into usb-next * 'for-next' of master.kernel.org:/pub/scm/linux/kernel/git/balbi/usb: usb: gadget: m66592-udc: add pullup function usb: gadget: m66592-udc: add function for external controller usb: gadget: r8a66597-udc: add pullup function usb: gadget: zero: add superspeed support usb: gadget: add SS descriptors to Ethernet gadget usb: gadget: r8a66597-udc: add support for TEST_MODE usb: gadget: m66592-udc: add support for TEST_MODE usb: gadget: r8a66597-udc: Make BUSWAIT configurable through platform data usb: gadget: r8a66597-udc: fix cannot connect after rmmod gadget driver usb: update email address in r8a66597-udc and m66592-udc usb: musb: restore INDEX register in resume path usb: gadget: fix up depencies usb: gadget: fusb300_udc: fix compile warnings usb: gadget: ci13xx_udc.c: fix compile warning usb: gadget: net2272: fix compile warnings usb: gadget: langwell_udc: fix compile warnings usb: gadget: fusb300_udc: drop dead code
| * usb: gadget: m66592-udc: add function for external controllerYoshihiro Shimoda2011-07-091-0/+2
| | | | | | | | | | | | | | | | | | | | M66592 has the pin of WR0 and WR1. So, if one write-pin of CPU connects to the pins, we have to change the setting of FIFOSEL register in the controller. If we don't change the setting, the controller cannot send the data of odd length. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: gadget: r8a66597-udc: Make BUSWAIT configurable through platform dataYoshihiro Shimoda2011-07-081-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BUSWAIT is a 4-bit-wide value that controls the number of access waits from the CPU to on-chip USB module. b'0000 inserts 0 wait (2 access cycles) and b'1111 inserts 15 waits (17 access cycles, hardware initial value), respectively. BUSWAIT value depends on peripheral clock frequency supplied to on-chip of each CPU, hence should be configurable through platform data. Note that this patch assumes that b'0000 (0 wait, 2 access cycles) is rerely used and considered as invalid. If valid 'buswait' data is not provided by platform, initial b'1111 (15 waits, 17 access cycles) will be applied as a safe default. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: update email address in ohci-sh and r8a66597-hcdYoshihiro Shimoda2011-07-081-1/+1
| | | | | | | | | | Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | usb: r8a66597-hcd: add function for external controllerYoshihiro Shimoda2011-07-081-0/+3
|/ | | | | | | | | | R8A66597 has the pin of WR0 and WR1. So, if one write-pin of CPU connects to the pins, we have to change the setting of FIFOSEL register in the controller. If we don't change the setting, the controller cannot send the data of odd length. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: gadget: udc-core: add "new-style" registration interfaceSebastian Andrzej Siewior2011-07-011-0/+6
| | | | | | | | | | | | | udc_start() should only trigger the internal state machine and make minimal house keeping. Before that call udc-core calls the bind() callback and after the callback the pullup(). udc_stop() is simillar, udc-core calls pullup(), unbind() and finally udc_stop(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: gadget: add missing #include'sSergei Shtylyov2011-07-011-0/+5
| | | | | | | | | | | | When #include'd alone, <linux/usb/gadget.h> causes a lot of compilation errors and warnings -- all because it relies on the including code to bring in the necessary #include's instead of doing this itself. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: gadget: add SuperSpeed support to the Gadget FrameworkTatyana Brokhman2011-07-012-0/+45
| | | | | | | | | | | | | | | | | SuperSpeed USB has defined a new descriptor, called the Binary Device Object Store (BOS) Descriptor. It has also changed a bit the definition of SET_FEATURE and GET_STATUS requests to add USB3-specific details. This patch implements both changes to the Composite Gadget Framework. [ balbi@ti.com : slight changes to commit log fixed a compile error on ARM ] Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: gadget: add max_speed to usb_composite_driverTatyana Brokhman2011-07-011-0/+2
| | | | | | | | | | | | | | | This field is used by the Gadget drivers to specify the maximum speed they support, meaning: the maximum speed they can provide descriptors for. The driver speed will be set in consideration of this value. [ balbi@ti.com : dropped the ifdeffery ] Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: gadget: add streams support to the gadget frameworkTatyana Brokhman2011-06-281-0/+13
| | | | | | | | | | | | | | | | | | | This patch defines necessary fields to support streaming for USB3.0. It implements a new function, called usb_ep_autoconfig_ss(), to be used instead of the existing usb_ep_autoconfig() when working in SuperSpeed mode and there is a need to search for an endpoint according to the number of required streams. [ balbi@ti.com : slight changes to commit log ] Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: gadget: use config_ep_by_speed() instead of ep_choose()Tatyana Brokhman2011-06-282-21/+0
| | | | | | | | | | Remove obsolete functions: 1. ep_choose() 2. usb_find_endpoint() Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: gadget: configure endpoint according to gadget speedTatyana Brokhman2011-06-282-0/+6
| | | | | | | | | | | | Add config_ep_by_speed() to configure the endpoint according to the gadget speed. Using this function will spare the FDs from handling the endpoint chosen descriptor. Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: gadget: add usb_endpoint_descriptor to struct usb_epTatyana Brokhman2011-06-281-9/+7
| | | | | | | | | | | | | | | | | Change usb_ep_enable() prototype to use endpoint descriptor from usb_ep. This optimization spares the FDs from saving the endpoint chosen descriptor. This optimization is not full though. To fully exploit this change, one needs to update all the UDCs as well since in the current implementation each of them saves the endpoint descriptor in it's internal (and extended) endpoint structure. Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: gadget: introduce UDC ClassFelipe Balbi2011-06-281-0/+7
| | | | | | | | | | | | | | | | | | | | | | | this class will be used to abstract away several of the duplicated operations scattered among the USB gadget controller drivers. Later, we can add an atomic notifier to tell interested drivers about what's happening with the controller. Notifications such as suspend, resume, enumerated, etc. will be useful, at a minimum, for implementing usb charger detection. As part of the converting process usb_gadget_probe_driver() is no longer part of each udc but pushed into the ->stap() callback. The same for his couterpart. The core is currently set explicit to 'n'. It will be changed to 'y' once all users are converted since it provides functions which clash with other drivers. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: renesas_usbhs: add DMAEngine supportKuninori Morimoto2011-06-071-0/+17
| | | | | | | | | | | | | | | | | | | | USB DMA was installed on "normal DMAC" when SH7724 or older SuperH, but the "USB-DMAC" was prepared on recent SuperH. These 2 DMAC have a little bit different behavior. This patch add DMAEngine code for "normal DMAC", but it is still using PIO fifo. The DMA fifo will be formally supported in the future. You can enable DMA fifo by local fixup usbhs_fifo_pio_push_handler -> usbhs_fifo_dma_push_handler usbhs_fifo_pio_pop_handler -> usbhs_fifo_dma_pop_handler on usbhsg_ep_enable. This DMAEngine was tested by g_file_storage on SH7724 Ecovec board Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: gadget.h depends on ch9.h so include ch9.h directlyMark Brown2011-06-071-0/+1
| | | | | | | The struct definitions are used. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'usb-next' of ↵Linus Torvalds2011-05-238-12/+268
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (205 commits) USB: EHCI: Remove SPARC_LEON {read,write}_be definitions from ehci.h USB: UHCI: Support big endian GRUSBHC HC sparc: add {read,write}*_be routines USB: UHCI: Add support for big endian descriptors USB: UHCI: Use ACCESS_ONCE rather than using a full compiler barrier USB: UHCI: Add support for big endian mmio usb-storage: Correct adjust_quirks to include latest flags usb/isp1760: Fix possible unlink problems usb/isp1760: Move function isp1760_endpoint_disable() within file. USB: remove remaining usages of hcd->state from usbcore and fix regression usb: musb: ux500: add configuration and build options for ux500 dma usb: musb: ux500: add dma glue layer for ux500 usb: musb: ux500: add dma name for ux500 usb: musb: ux500: add ux500 specific code for gadget side usb: musb: fix compile error usb-storage: fix up the unusual_realtek device list USB: gadget: f_audio: Fix invalid dereference of initdata EHCI: don't rescan interrupt QHs needlessly OHCI: fix regression caused by nVidia shutdown workaround USB: OTG: msm: Free VCCCX regulator even if we can't set the voltage ...
| * usb: gadget: composite: Allow function drivers to pause control transfersRoger Quadros2011-05-101-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some USB function drivers (e.g. f_mass_storage.c) need to delay or defer the data/status stages of standard control requests like SET_CONFIGURATION or SET_INTERFACE till they are done with their bookkeeping and are actually ready for accepting new commands to their interface. They can now achieve this functionality by returning USB_GADGET_DELAYED_STATUS in their setup handlers (e.g. set_alt()). The composite framework will then defer completion of the control transfer by not completing the data/status stages. This ensures that the host does not send new packets to the interface till the function driver is ready to take them. When the function driver that requested for USB_GADGET_DELAYED_STATUS is done with its bookkeeping, it should signal the composite framework to continue with the data/status stages of the control transfer. It can do so by invoking the new API usb_composite_setup_continue(). This is where the control transfer's data/status stages are completed and host can initiate new transfers. The DELAYED_STATUS mechanism is currently only supported if the expected data phase is 0 bytes (i.e. w_length == 0). Since SET_CONFIGURATION and SET_INTERFACE are the only cases that will use this mechanism, this is not a limitation. Signed-off-by: Roger Quadros <roger.quadros@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * Merge branch 2.6.39-rc7 into usb-linusGreg Kroah-Hartman2011-05-101-2/+3
| |\ | | | | | | | | | | | | | | | | | | This was needed to resolve a conflict in: drivers/usb/host/isp1760-hcd.c Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: OTG: msm: Add PHY suspend support for MSM8960Pavankumar Kondeti2011-05-061-0/+2
| | | | | | | | | | | | | | | Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: OTG: msm: Implement charger detectionPavankumar Kondeti2011-05-061-1/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement good battery algorithm defined in the battery charging V1.2 spec for detecting different charging ports. USB hardware is put into low power mode when connected to a dedicated charging port. vbus_draw and set_power methods are implemented for determining the allowed current from Host in different states (un-configured/suspend/configured). The charger block is implemented using vendor specific registers and the PHY used in MSM8960(28nm PHY) different from older targets like MSM8x60 and MSM7x30(45nm PHY). The PHY vendor and product id registers are not implemented in the above chipsets. Hence PHY type is passed via platform data. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud