summaryrefslogtreecommitdiffstats
path: root/include/linux/power
Commit message (Collapse)AuthorAgeFilesLines
* power: supply: bq27xxx_battery: Fix register map for BQ27510 and BQ27520Andrew F. Davis2016-11-231-1/+2
| | | | | | | | | | The BQ27510 and BQ27520 use a slightly different register map than the BQ27500, add a new type enum and add these gauges to it. Fixes: d74534c27775 ("power: bq27xxx_battery: Add support for additional bq27xxx family devices") Based-on-patch-by: Kenneth R. Crudup <kenny@panix.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* power: supply: bq27xxx_battery: allow kernel poll_interval parameter runtime ↵Matt Ranostay2016-09-211-0/+1
| | | | | | | | | | | | update Fix issue with poll_interval being not updated till the previous interval expired. Cc: Tony Lindgren <tony@atomide.com> Cc: Liam Breck <liam@networkimprov.net> Signed-off-by: Matt Ranostay <matt@ranostay.consulting> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* power: supply: sbs-battery: Cleanup removal of chip->pdataPhil Reid2016-09-211-2/+2
| | | | | | | | | | | | | | | There where still a few lingering references to pdata after commit power: supply: sbs-battery: simplify DT parsing. Remove pdata from struct·sbs_info and conditional checks to ser if this was set from the i2c read / write functions. Instead of call max in each function for incrementing poll_retry_count do it once in the probe function. Fixup null pointer dereference in to pdata in sbs_external_power_changed. Change retry counts to u32 to avoid need for max. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* power: supply: bq24735-charger: Request status GPIO with initial input setupPaul Kocialkowski2016-09-051-4/+0
| | | | | | | | | | | | | | | This requests the status GPIO with initial input setup. It is required to read the GPIO status at probe time and thus correctly avoid sending I2C messages when AC is not plugged. When requesting the GPIO without initial input setup, it always reads 0 which causes probe to fail as it assumes the charger is connected, sends I2C messages and fails. While at it, this switches the driver over to gpiod API. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* power: supply: sbs-battery: Use gpio_desc and sleeping calls for battery detectPhil Reid2016-09-011-4/+0
| | | | | | | | | | | | | | | | Switch to using new gpio_desc interface and devm gpio get calls to automatically manage gpio resource. Use gpiod_get_value which handles active high / low calls. If gpio_detect is set then force loading of the driver as it is reasonable to assume that the battery may not be present. Update the is_present flag immediately in the IRQ. Remove legacy gpio specification from platform data. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* max8903: cleans up confusing relationship between dc_valid, dok and dcm.Chris Lapa2016-06-281-3/+3
| | | | | | | | | | | | | | | | | | | | The max8903_charger.h file indicated that dcm and dok were not optional when dc_valid is set. It makes sense to have dok as a compulsory pin when dc_valid is given. However dcm can be optionally wired to a fixed level especially when the circuit is configured for dc power exclusively. The previous implementation already allowed for this somewhat, however no error was given if dok wasn't given whilst dc_valid was. The new implementation enforces dok presence when dc_valid is given. Whilst allowing dcm to be optional. Signed-off-by: Chris Lapa <chris@lapa.com.au> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* Merge tag 'for-v4.6' of ↵Linus Torvalds2016-03-171-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset changes from Sebastian Reichel: - add types for USB Type C and PD chargers - add act8945a charger driver - add ACPI/DT bindings for goldfish-battery - add support for versatile reset controller - misc fixes * tag 'for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (24 commits) power: pm2301-charger: use __maybe_unused to hide pm functions power: ipaq-micro-battery: use __maybe_unused to hide pm functions power_supply: 88pm860x_charger: do not pass NULL to power_supply_put jz4740-battery: Correct voltage change check power_supply: lp8788-charger: initialize boolean 'found' goldfish: Enable ACPI-based enumeration for goldfish battery power: goldfish_battery: add devicetree bindings power: act8945a: add charger driver for ACT8945A power: add documentation for ACT8945A's charger DT bindings ARM: dts: n900: Rename isp1704 to isp1707 to match correct name power_supply: bq27xxx_battery: Add of modalias and match table when CONFIG_OF is enabled power_supply: bq2415x_charger: Add of modalias and match table when CONFIG_OF is enabled power_supply: bq2415x_charger: Do not add acpi modalias when CONFIG_ACPI is not enabled power_supply: isp1704_charger: Add compatible of match for nxp,isp1707 power_supply: isp1704_charger: Error messages when probe fail power_supply: Add types for USB Type C and PD chargers power: bq24735-charger: add 'ti,external-control' option power: bq24735-charger: document 'ti,external-control' option power: bq24735-charger: fix failed i2c with ac-detect power: reset: Fix dependencies for !HAS_IOMEM archs ...
| * power: bq24735-charger: add 'ti,external-control' optionJonathan Tinkham2016-02-151-0/+2
| | | | | | | | | | | | | | | | Implement an 'ti,external-control' option for when the charger shouldn't be configured by the host. Signed-off-by: Jonathan Tinkham <sctincman@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* | power: bq27xxx_battery: Restore device nameIvaylo Dimitrov2016-02-211-0/+1
|/ | | | | | | | | | | | Patch <703df6c09795> ("power: bq27xxx_battery: Reorganize I2C into a module") has removed the device name numbering from bq27xxx_battery_i2c_probe. Fix that by restoring the code. Fixes: 703df6c097956d17a818e63961c82e8e9eef9fef Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* power: bq27xxx_battery: Reorganize I2C into a moduleAndrew F. Davis2015-12-051-10/+47
| | | | | | | | Separate out I2C functionality into a module. This fixes several small issues and simplifies the driver initialization. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* power: bq27xxx_battery: Add support for additional bq27xxx family devicesAndrew F. Davis2015-09-231-1/+9
| | | | | | | | | | | | | Add support for additional devices and register equivalent family devices including the bq27010, bq27210, bq27500, bq27510, bq27520, bq27530, bq27531, bq27541, bq27542, bq27546, bq27545, bq27441, bq27421, and the bq27641. To facilitate this process the register mapings have been moved to tables and other small cleanups have been made. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* power: bq27xxx_battery: Platform initialization must declare a deviceAndrew F. Davis2015-09-231-1/+5
| | | | | | | | When initialized as a platform device the initializer must now specify a device. An empty device name is no longer valid. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* power: bq27x00_battery: Renaming for consistencyAndrew F. Davis2015-09-231-2/+2
| | | | | | | | | | | Rename functions that are used by multiple devices. New devices have been added and the function names and driver name are no longer general enough for the functionality they provide. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: GUAN Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* power: charger-manager: comment spelling fixesMarcel Ziswiler2015-09-221-4/+4
| | | | | | | | | | | | | | | By accident I stumbled over a few misspelled words in the charger-manager header file which this patch fixes. Namely: - Extcon rather than Exton - constraint rather than constratint - existence rather than existance - difference rather than diffential While at it also add a missing space before a closing comment star forward-slash. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* power: max17042_battery: add HEALTH and TEMP_* properties supportRamakrishna Pallala2015-05-231-0/+4
| | | | | | | | | | | | | | | This patch adds the support for following battery properties to max17042 fuel gauge driver. POWER_SUPPLY_PROP_TEMP_ALERT_MIN POWER_SUPPLY_PROP_TEMP_ALERT_MAX POWER_SUPPLY_PROP_TEMP_MIN POWER_SUPPLY_PROP_TEMP_MAX POWER_SUPPLY_PROP_HEALTH Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* power: max17042_battery: Use reg type instead of chip typeBeomho Seo2015-04-061-1/+8
| | | | | | | | | | Currently, max17042 battery driver choose register map by MAX17042_DevName register. But it is return IC specific firmware version. So other maxim chip hard to use this drvier. This patch choose chip type from driver_data. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* power_supply: Change ownership from driver to coreKrzysztof Kozlowski2015-03-131-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change the ownership of power_supply structure from each driver implementing the class to the power supply core. The patch changes power_supply_register() function thus all drivers implementing power supply class are adjusted. Each driver provides the implementation of power supply. However it should not be the owner of power supply class instance because it is exposed by core to other subsystems with power_supply_get_by_name(). These other subsystems have no knowledge when the driver will unregister the power supply. This leads to several issues when driver is unbound - mostly because user of power supply accesses freed memory. Instead let the core own the instance of struct 'power_supply'. Other users of this power supply will still access valid memory because it will be freed when device reference count reaches 0. Currently this means "it will leak" but power_supply_put() call in next patches will solve it. This solves invalid memory references in following race condition scenario: Thread 1: charger manager Thread 2: power supply driver, used by charger manager THREAD 1 (charger manager) THREAD 2 (power supply driver) ========================== ============================== psy = power_supply_get_by_name() Driver unbind, .remove power_supply_unregister() Device fully removed psy->get_property() The 'get_property' call is executed in invalid context because the driver was unbound and struct 'power_supply' memory was freed. This could be observed easily with charger manager driver (here compiled with max17040 fuel gauge): $ cat /sys/devices/virtual/power_supply/cm-battery/capacity & $ echo "1-0036" > /sys/bus/i2c/drivers/max17040/unbind [ 55.725123] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 55.732584] pgd = d98d4000 [ 55.734060] [00000000] *pgd=5afa2831, *pte=00000000, *ppte=00000000 [ 55.740318] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 55.746210] Modules linked in: [ 55.749259] CPU: 1 PID: 2936 Comm: cat Tainted: G W 3.19.0-rc1-next-20141226-00048-gf79f475f3c44-dirty #1496 [ 55.760190] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 55.766270] task: d9b76f00 ti: daf54000 task.ti: daf54000 [ 55.771647] PC is at 0x0 [ 55.774182] LR is at charger_get_property+0x2f4/0x36c [ 55.779201] pc : [<00000000>] lr : [<c034b0b4>] psr: 60000013 [ 55.779201] sp : daf55e90 ip : 00000003 fp : 00000000 [ 55.790657] r10: 00000000 r9 : c06e2878 r8 : d9b26c68 [ 55.795865] r7 : dad81610 r6 : daec7410 r5 : daf55ebc r4 : 00000000 [ 55.802367] r3 : 00000000 r2 : daf55ebc r1 : 0000002a r0 : d9b26c68 [ 55.808879] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 55.815994] Control: 10c5387d Table: 598d406a DAC: 00000015 [ 55.821723] Process cat (pid: 2936, stack limit = 0xdaf54210) [ 55.827451] Stack: (0xdaf55e90 to 0xdaf56000) [ 55.831795] 5e80: 60000013 c01459c4 0000002a c06f8ef8 [ 55.839956] 5ea0: db651000 c06f8ef8 daebac00 c04cb668 daebac08 c0346864 00000000 c01459c4 [ 55.848115] 5ec0: d99eaa80 c06f8ef8 00000fff 00001000 db651000 c027f25c c027f240 d99eaa80 [ 55.856274] 5ee0: d9a06c00 c0146218 daf55f18 00001000 d99eaa80 db4c18c0 00000001 00000001 [ 55.864468] 5f00: daf55f80 c0144c78 c0144c54 c0107f90 00015000 d99eaab0 00000000 00000000 [ 55.872603] 5f20: 000051c7 00000000 db4c18c0 c04a9370 00015000 00001000 daf55f80 00001000 [ 55.880763] 5f40: daf54000 00015000 00000000 c00e53dc db4c18c0 c00e548c 0000000d 00008124 [ 55.888937] 5f60: 00000001 00000000 00000000 db4c18c0 db4c18c0 00001000 00015000 c00e5550 [ 55.897099] 5f80: 00000000 00000000 00001000 00001000 00015000 00000003 00000003 c000f364 [ 55.905239] 5fa0: 00000000 c000f1a0 00001000 00015000 00000003 00015000 00001000 0001333c [ 55.913399] 5fc0: 00001000 00015000 00000003 00000003 00000002 00000000 00000000 00000000 [ 55.921560] 5fe0: 7fffe000 be999850 0000a225 b6f3c19c 60000010 00000003 00000000 00000000 [ 55.929744] [<c034b0b4>] (charger_get_property) from [<c0346864>] (power_supply_show_property+0x48/0x20c) [ 55.939286] [<c0346864>] (power_supply_show_property) from [<c027f25c>] (dev_attr_show+0x1c/0x48) [ 55.948130] [<c027f25c>] (dev_attr_show) from [<c0146218>] (sysfs_kf_seq_show+0x84/0x104) [ 55.956298] [<c0146218>] (sysfs_kf_seq_show) from [<c0144c78>] (kernfs_seq_show+0x24/0x28) [ 55.964536] [<c0144c78>] (kernfs_seq_show) from [<c0107f90>] (seq_read+0x1b0/0x484) [ 55.972172] [<c0107f90>] (seq_read) from [<c00e53dc>] (__vfs_read+0x18/0x4c) [ 55.979188] [<c00e53dc>] (__vfs_read) from [<c00e548c>] (vfs_read+0x7c/0x100) [ 55.986304] [<c00e548c>] (vfs_read) from [<c00e5550>] (SyS_read+0x40/0x8c) [ 55.993164] [<c00e5550>] (SyS_read) from [<c000f1a0>] (ret_fast_syscall+0x0/0x48) [ 56.000626] Code: bad PC value [ 56.011652] ---[ end trace 7b64343fbdae8ef1 ]--- Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [for the nvec part] Reviewed-by: Marc Dietrich <marvin24@gmx.de> [for compal-laptop.c] Acked-by: Darren Hart <dvhart@linux.intel.com> [for the mfd part] Acked-by: Lee Jones <lee.jones@linaro.org> [for the hid part] Acked-by: Jiri Kosina <jkosina@suse.cz> [for the acpi part] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* power: charger-manager: Use alarmtimer for battery monitoring in suspend.Jonghwa Lee2015-01-211-31/+1
| | | | | | | | | | | | To guerantee proper charing and managing batteries even in suspend, charger-manager has used rtc device with rtc framework interface. However, it is better to use alarmtimer for cleaner and more appropriate operation. This patch makes driver to use alarmtimer for polling work in suspend and removes all deprecated codes related with using rtc interface. Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* power: charger-manager: Fix accessing invalidated power supply after charger ↵Krzysztof Kozlowski2014-10-281-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | unbind The charger manager obtained in probe references to power supplies for all chargers with power_supply_get_by_name() for later usage. However if such charger driver was removed then this reference would point to old power supply (from driver which was removed). This lead to accessing invalid memory which could be observed with: $ echo "max77693-charger" > /sys/bus/platform/drivers/max77693-charger/unbind $ grep . /sys/devices/virtual/power_supply/battery/charger.0/* $ grep . /sys/devices/virtual/power_supply/battery/* [ 15.339817] Unable to handle kernel paging request at virtual address 0001c12c [ 15.346187] pgd = edd08000 [ 15.348814] [0001c12c] *pgd=6dce2831, *pte=00000000, *ppte=00000000 [ 15.355075] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 15.360967] Modules linked in: [ 15.364010] CPU: 2 PID: 1388 Comm: grep Not tainted 3.17.0-next-20141007-00027-ga95e761db1b0 #245 [ 15.372859] task: ee03ad00 ti: edcf6000 task.ti: edcf6000 [ 15.378241] PC is at 0x1c12c [ 15.381113] LR is at is_ext_pwr_online+0x30/0x6c [ 15.385706] pc : [<0001c12c>] lr : [<c0339fc4>] psr: a0000013 [ 15.385706] sp : edcf7e88 ip : 00000000 fp : 00000000 [ 15.397161] r10: eeb02c08 r9 : c04b1f84 r8 : eeb02c00 [ 15.402369] r7 : edc69a10 r6 : eea6ac10 r5 : eea6ac10 r4 : 00000004 [ 15.408878] r3 : 0001c12c r2 : edcf7e8c r1 : 00000004 r0 : ee914418 [ 15.415390] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 15.422506] Control: 10c5387d Table: 6dd0804a DAC: 00000015 [ 15.428236] Process grep (pid: 1388, stack limit = 0xedcf6240) [ 15.434050] Stack: (0xedcf7e88 to 0xedcf8000) [ 15.438395] 7e80: ee03ad00 00000000 edcf7f80 eea6aca8 edcf7ec4 c033b7b0 [ 15.446554] 7ea0: 00000001 ee1cc3f0 00000004 c06e1e44 eebdc000 c06e1e44 eeb02c00 c0337144 [ 15.454713] 7ec0: ee2dac68 c005cffc ee1cc3c0 c06e1e44 00000fff 00001000 eebdc000 c0278ca8 [ 15.462872] 7ee0: c0278c8c ee1cc3c0 eeb7ce00 c014422c edcf7f20 00008000 ee1cc3c0 ee9a48c0 [ 15.471030] 7f00: 00000001 00000001 edcf7f80 c0142d94 c0142d70 c01060f4 00021000 ee1cc3f0 [ 15.479190] 7f20: 00000000 00000000 c06a2150 eebdc000 2e7ec000 ee9a48c0 00008000 00021000 [ 15.487349] 7f40: edcf7f80 00008000 edcf6000 00021000 00021000 c00e39a4 00000000 ee9a48c0 [ 15.495508] 7f60: 00004000 00000000 00000000 ee9a48c0 ee9a48c0 00008000 00021000 c00e3aa0 [ 15.503668] 7f80: 00000000 00000000 0001f2e0 0001f2e0 00021000 00001000 00000003 c000f364 [ 15.511826] 7fa0: 00000000 c000f1a0 0001f2e0 00021000 00000003 00021000 00008000 00000000 [ 15.519986] 7fc0: 0001f2e0 00021000 00001000 00000003 00000001 000205e8 00000000 00021000 [ 15.528145] 7fe0: 00008000 bebbe910 0000a7ad b6edc49c 60000010 00000003 aaaaaaaa aaaaaaaa [ 15.536320] [<c0339fc4>] (is_ext_pwr_online) from [<c033b7b0>] (charger_get_property+0x170/0x314) [ 15.545164] [<c033b7b0>] (charger_get_property) from [<c0337144>] (power_supply_show_property+0x48/0x20c) [ 15.554719] [<c0337144>] (power_supply_show_property) from [<c0278ca8>] (dev_attr_show+0x1c/0x48) [ 15.563577] [<c0278ca8>] (dev_attr_show) from [<c014422c>] (sysfs_kf_seq_show+0x84/0x104) [ 15.571725] [<c014422c>] (sysfs_kf_seq_show) from [<c0142d94>] (kernfs_seq_show+0x24/0x28) [ 15.579973] [<c0142d94>] (kernfs_seq_show) from [<c01060f4>] (seq_read+0x1b0/0x484) [ 15.587614] [<c01060f4>] (seq_read) from [<c00e39a4>] (vfs_read+0x88/0x144) [ 15.594552] [<c00e39a4>] (vfs_read) from [<c00e3aa0>] (SyS_read+0x40/0x8c) [ 15.601417] [<c00e3aa0>] (SyS_read) from [<c000f1a0>] (ret_fast_syscall+0x0/0x48) [ 15.608877] Code: bad PC value [ 15.611991] ---[ end trace a88fcc95208db283 ]--- The charger-manager should get reference to charger power supply on each use of get_property callback. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: <stable@vger.kernel.org> Fixes: 3bb3dbbd56ea ("power_supply: Add initial Charger-Manager driver") Signed-off-by: Sebastian Reichel <sre@kernel.org>
* power: charger-manager: Fix accessing invalidated power supply after fuel ↵Krzysztof Kozlowski2014-10-281-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gauge unbind The charger manager obtained reference to fuel gauge power supply in probe with power_supply_get_by_name() for later usage. However if fuel gauge driver was removed and re-added then this reference would point to old power supply (from driver which was removed). This lead to accessing old (and probably invalid) memory which could be observed with: $ echo "12-0036" > /sys/bus/i2c/drivers/max17042/unbind $ echo "12-0036" > /sys/bus/i2c/drivers/max17042/bind $ cat /sys/devices/virtual/power_supply/battery/capacity [ 240.480084] INFO: task cat:1393 blocked for more than 120 seconds. [ 240.484799] Not tainted 3.17.0-next-20141007-00028-ge60b6dd79570 #203 [ 240.491782] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.499589] cat D c0469530 0 1393 1 0x00000000 [ 240.505947] [<c0469530>] (__schedule) from [<c0469d3c>] (schedule_preempt_disabled+0x14/0x20) [ 240.514449] [<c0469d3c>] (schedule_preempt_disabled) from [<c046af08>] (mutex_lock_nested+0x1bc/0x458) [ 240.523736] [<c046af08>] (mutex_lock_nested) from [<c0287a98>] (regmap_read+0x30/0x60) [ 240.531647] [<c0287a98>] (regmap_read) from [<c032238c>] (max17042_get_property+0x2e8/0x350) [ 240.540055] [<c032238c>] (max17042_get_property) from [<c03247d8>] (charger_get_property+0x264/0x348) [ 240.549252] [<c03247d8>] (charger_get_property) from [<c0320764>] (power_supply_show_property+0x48/0x1e0) [ 240.558808] [<c0320764>] (power_supply_show_property) from [<c027308c>] (dev_attr_show+0x1c/0x48) [ 240.567664] [<c027308c>] (dev_attr_show) from [<c0141fb0>] (sysfs_kf_seq_show+0x84/0x104) [ 240.575814] [<c0141fb0>] (sysfs_kf_seq_show) from [<c0140b18>] (kernfs_seq_show+0x24/0x28) [ 240.584061] [<c0140b18>] (kernfs_seq_show) from [<c0104574>] (seq_read+0x1b0/0x484) [ 240.591702] [<c0104574>] (seq_read) from [<c00e1e24>] (vfs_read+0x88/0x144) [ 240.598640] [<c00e1e24>] (vfs_read) from [<c00e1f20>] (SyS_read+0x40/0x8c) [ 240.605507] [<c00e1f20>] (SyS_read) from [<c000e760>] (ret_fast_syscall+0x0/0x48) [ 240.612952] 4 locks held by cat/1393: [ 240.616589] #0: (&p->lock){+.+.+.}, at: [<c01043f4>] seq_read+0x30/0x484 [ 240.623414] #1: (&of->mutex){+.+.+.}, at: [<c01417dc>] kernfs_seq_start+0x1c/0x8c [ 240.631086] #2: (s_active#31){++++.+}, at: [<c01417e4>] kernfs_seq_start+0x24/0x8c [ 240.638777] #3: (&map->mutex){+.+...}, at: [<c0287a98>] regmap_read+0x30/0x60 The charger-manager should get reference to fuel gauge power supply on each use of get_property callback. The thermal zone 'tzd' field of power supply should not be used because of the same reason. Additionally this change solves also the issue with nested thermal_zone_get_temp() calls and related false lockdep positive for deadlock for thermal zone's mutex [1]. When fuel gauge is used as source of temperature then the charger manager forwards its get_temp calls to fuel gauge thermal zone. So actually different mutexes are used (one for charger manager thermal zone and second for fuel gauge thermal zone) but for lockdep this is one class of mutex. The recursion is removed by retrieving temperature through power supply's get_property(). In case external thermal zone is used ('cm-thermal-zone' property is present in DTS) the recursion does not exist. Charger manager simply exports POWER_SUPPLY_PROP_TEMP_AMBIENT property (instead of POWER_SUPPLY_PROP_TEMP) thus no thermal zone is created for this power supply. [1] https://lkml.org/lkml/2014/10/6/309 Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: <stable@vger.kernel.org> Fixes: 3bb3dbbd56ea ("power_supply: Add initial Charger-Manager driver") Signed-off-by: Sebastian Reichel <sre@kernel.org>
* isp1704_charger: Add DT supportSebastian Reichel2013-12-231-0/+1
| | | | | | | | | This patch introduces device tree support to the isp1704 charger driver. Adding support involved moving the handling of the enable GPIO from board code into the driver. Signed-off-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* bq2415x_charger: Use power_supply notifier for automodePali Rohár2013-12-231-43/+5
| | | | | | | | | | | | This patch removing set_mode_hook function from board data and replacing it with new string variable of notifier power supply device. After this change it is possible to add DT support because driver does not need specific board function anymore. Only static data and name of power supply device is required. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* charger-manager: Support deivce tree in charger manager driverJonghwa Lee2013-12-231-6/+6
| | | | | | | | | Charger-manager can parse charger_desc data from devicetree which is used to register charger manager. Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* charger-manager: Modify the way of checking battery's temperatureJonghwa Lee2013-12-231-8/+16
| | | | | | | | | | | | | | | | | | | Charger-manager driver used to check battery temperature through the callback function passed by platform data. Unfortunatley, without that pre-defined callback function, charger-manager can't get battery's temperature at all. Also passing callback function through platform data ruins DT support for charger-manager. This patch mondifies charger-manager driver to get temperature of battery without pre-defined callback function. Now, charger-manager can use either of battery thermometer in fuel-gauge and ouside of battery. It uses thermal framework interface for outer thermometer if thermal fw is enabled. Otherwise, it tries to use fuel-gauge's through the power supply interface. Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* power_supply: Add support for bq24735 chargerDarbha Sriharsha2013-10-251-0/+39
| | | | | | | | | | | | | | | Adds support for the bq24735 charger chipset. The bq24735 is a high-efficiency, synchronous battery charger. It allows control of the charging current, input current, and the charger voltage DAC's through SMBus. Signed-off-by: Darbha Sriharsha <dsriharsha@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Thanks-to: Stephen Warren <swarren@wwwdotorg.org> Thanks-to: Thierry Reding <thierry.reding@gmail.com> Thanks-to: Manish Badarkhe <badarkhe.manish@gmail.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* power: Add twl4030_madc battery driver.Marek Belisko2013-08-301-0/+39
| | | | | | | | | | This driver is used and tested on gta04 phone. It's using twl4030_madc (similar to rx51 existing driver). Driver also implement charging and discharging calibration data so user can define ranges and level. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Lukas Märdian <lukas@goldelico.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* bq24190_charger: Add support for TI BQ24190 Battery ChargerMark A. Greer2013-08-271-0/+16
| | | | | | | | | | | | | | | | Add driver support for the Texas Instruments BQ24190 battery charger. Some of the information provided by the device is about the charger and other information is about the battery so create two power_supply objects (one for each) and provide the appropriate information for each one. The device has many fields that go beyond what is reasonable to report or modify using the existing 'POWER_SUPPLY_PROP_*' properties so the driver exports the register fields via sysfs. They are prefixed by 'f_' (for 'field') to make it easier to distinguish between a register field and a "normal" sysfs file exported by the power_supply infrastructure. Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* PM / AVS: SmartReflex: use omap_sr * for enable/disable interfaceAndrii Tseglytskyi2013-06-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | SmartReflex driver interface is natively divided to two parts: - external SmartReflex interface - interface between SmartReflex driver and SmartReflex Class Functions which belong to AVS class interface can use struct omap_sr* instead of struct voltatedomain*, to provide a direct connection between SR driver and SR class. This allows us to optimize and not do additional lookups where none is required. sr_enable() and sr_disable() are interface functions between SR driver and SR class. They are typically used by Class driver to enable/disable SmartReflex hardware module. Now they take struct omap_sr* as input parameter. Signed-off-by: Andrii Tseglytskyi <andrii.tseglytskyi@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
* PM / AVS: SmartReflex: use omap_sr * for minmax interfacesAndrii Tseglytskyi2013-06-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | SmartReflex driver interface is natively divided to two parts: - external SmartReflex interface - interface between SmartReflex driver and SmartReflex Class Functions which belong to AVS class interface can use struct omap_sr* instead of struct voltatedomain*, to provide a direct connection between SR driver and SR class. This allows us to optimize and not do additional lookups where none is required. sr_configure_minmax() is interface function between SR driver and SR class. It is typically used by Class driver to configure MINMAXAVG module inside SmartReflex module. Now it takes struct omap_sr* as input parameter. Signed-off-by: Andrii Tseglytskyi <andrii.tseglytskyi@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
* PM / AVS: SmartReflex: use omap_sr * for errgen interfacesAndrii Tseglytskyi2013-06-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | SmartReflex driver interface is natively divided to two parts: - external SmartReflex interface - interface between SmartReflex driver and SmartReflex Class Functions which belong to AVS class interface can use struct omap_sr* instead of struct voltatedomain*, to provide a direct connection between SR driver and SR class. This allows us to optimize and not do additional lookups where none is required. sr_disable_errgen() and sr_configure_errgen() are interface functions between SR driver and SR class. They are typically used by Class driver to configure error generator module during SmartReflex enable/disable sequence. Now they take struct omap_sr* as input parameter. Signed-off-by: Andrii Tseglytskyi <andrii.tseglytskyi@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
* ab8500_bmdata: Export abx500_res_to_temp tables for hwmonHongbo Zhang2013-04-161-0/+16
| | | | | | | | | | This patch exports the thermistor resistance-to-temperature tables, so that the hwmon driver can access them, and also adds the corresponding table size variables. Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* bq2415x_charger: Add support for offline and 100mA modePali Rohár2013-02-161-1/+2
| | | | | | | | | | | * Renamed mode BQ2415X_MODE_NONE to BQ2415X_MODE_OFF because this mode turning chaging completly off * Added new mode BQ2415X_MODE_NONE which enable charging with maximal current limit 100mA (this is minimal safe value for bq2415x chips) Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* Merge tag 'for-v3.8-merged' of git://git.infradead.org/battery-2.6Linus Torvalds2012-12-131-0/+95
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull battery subsystem updates from Anton Vorontsov: "Highlights: - Two new drivers from Pali Rohár and N900 hackers: rx51_battery and bq2415x_charger. The drivers are a part of a solution to replace the proprietary Nokia BME stack - Power supply core now registers devices with a thermal cooling subsystem, so we can now automatically throttle charging. Thanks to Ramakrishna Pallala! - Device tree support for ab8500 and max8925_power drivers - Random fixups and enhancements for a bunch of drivers." * tag 'for-v3.8-merged' of git://git.infradead.org/battery-2.6: (22 commits) max8925_power: Add support for device-tree initialization ab8500: Add devicetree support for chargalg ab8500: Add devicetree support for charger ab8500: Add devicetree support for btemp ab8500: Add devicetree support for fuelgauge twl4030_charger: Change TWL4030_MODULE_* ids to TWL_MODULE_* jz4740-battery: Use devm_request_and_ioremap jz4740-battery: Use devm_kzalloc bq27x00_battery: Fixup nominal available capacity reporting bq2415x_charger: Fix style issues bq2415x_charger: Add Kconfig/Makefile entries power_supply: Add bq2415x charger driver power_supply: Add new Nokia RX-51 (N900) power supply battery driver max17042_battery: Fix missing verify_model_lock() return value check ds2782_battery: Fix signedness bug in ds278x_read_reg16() lp8788-charger: Fix ADC channel names lp8788-charger: Fix wrong ADC conversion lp8788-charger: Use consumer device name on setting IIO channels power_supply: Register power supply for thermal cooling device power_supply: Add support for CHARGE_CONTROL_* attributes ...
| * bq2415x_charger: Fix style issuesAnton Vorontsov2012-11-181-63/+68
| | | | | | | | | | | | | | | | I hate doing these style fixups myself, but I also hate inconsitent code. Normally I just ask to resubmit the patch with the issues fixed, but N900 is special: I have a selfish interest in it. :) Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
| * power_supply: Add bq2415x charger driverPali Rohár2012-11-181-0/+90
| | | | | | | | | | | | | | | | | | The bq2415x charger driver is needed for example on Nokia N900 for charging battery. Driver is part of open source project to replace proprietary battery management. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
* | ARM: OMAP: SmartReflex: pass device dependent data via platform dataJean Pihet2012-10-151-2/+12
|/ | | | | | | | | | | | | | | | Remove the device dependent code (ex. cpu_is_xxx()) and settings from the driver code and instead pass them via the platform data. This allows a clean separation of the driver code and the platform code, as required by the move of the platform header files to include/linux/platform_data. Note about the smartreflex functional clocks: the smartreflex fclks are derived from sys_clk and have the same name as the main_clk from the hwmod entry, in order for the SmartReflex driver to request the fclk (using clk_get(dev, "fck")). Signed-off-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
* Merge tag 'for-v3.7' of git://git.infradead.org/battery-2.6Linus Torvalds2012-10-071-5/+42
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull battery updates from Anton Vorontsov: "1. New drivers: - Marvell 88pm860x charger and battery drivers; - Texas Instruments LP8788 charger driver; 2. Two new power supply properties: whether a battery is authentic, and chargers' maximal currents and voltages; 3. A lot of TI LP8727 Charger cleanups; 4. New features for Charger Manager, mainly now we can disable specific regulators; 5. Random fixes and cleanups for other drivers." Fix up trivial conflicts in <linux/mfd/88pm860x.h> * tag 'for-v3.7' of git://git.infradead.org/battery-2.6: (52 commits) pda_power: Remove ac_draw_failed goto and label charger-manager: Add support sysfs entry for charger charger-manager: Support limit of maximum possible charger-manager: Check fully charged state of battery periodically lp8727_charger: More pure cosmetic improvements lp8727_charger: Fix checkpatch warning lp8727_charger: Add description in the private data lp8727_charger: Fix a typo - chg_parm to chg_param lp8727_charger: Make some cosmetic changes in lp8727_delayed_func() lp8727_charger: Clean up lp8727_charger_changed() lp8727_charger: Return if the battery is discharging lp8727_charger: Make lp8727_charger_get_propery() simpler lp8727_charger: Make lp8727_ctrl_switch() inline lp8727_charger: Make lp8727_init_device() shorter lp8727_charger: Clean up lp8727_is_charger_attached() lp8727_charger: Use specific definition lp8727_charger: Clean up lp8727 definitions lp8727_charger: Use the definition rather than enum lp8727_charger: Fix code for getting battery temp lp8727_charger: Clear interrrupts at inital time ...
| * charger-manager: Add support sysfs entry for chargerChanwoo Choi2012-09-211-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add support sysfs entry for each charger(regulator). Charger-manager use one or more chargers for charging battery but some charger isn't necessary on specific scenario. So, if some charger isn't needed, can disable specific charger through 'externally_control' entry while system is on state and confirm the information(name, state) of charger. The list of added sysfs entry - /sys/class/power_supply/battery/chargers/charger.[index]/name show name of charger(regulator) - /sys/class/power_supply/battery/chargers/charger.[index]/state show either enabled or disabled state of charger - /sys/class/power_supply/battery/chargers/charger.[index]/externally_control If 'externally_control' of specific charger is 1, Charger-manager cannot enable regulator for charging when charger cable is attached and charger must be maintained with disabled state. If 'externally_control' is zero, Charger-manager usually can control to enable/disable regulator. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
| * charger-manager: Support limit of maximum possibleChanwoo Choi2012-09-201-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch check maximum possible duration of charging/discharging. If whole charging duration exceed 'desc->charging_max_duration_ms', cm stop charging to prevent overcharge/overheat. And if discharging duration exceed, charger cable is attached, after full-batt, cm start charging to maintain fully charged state for battery. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
| * charger-manager: Check fully charged state of battery periodicallyChanwoo Choi2012-09-201-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch check periodically fully charged state of battery to protect overcharge and overheat. If battery is fully charged, stop charging and check droped voltage with 'fullbatt_vchkdrop_ms' period. When voltage of battery is more droped than 'fullbatt_vchkdrop_uV' voltage, charger-manager will restart charging for battery. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
| * charger-manager: Fix struct charger_desc's misleading commentAnton Vorontsov2012-08-221-1/+1
| | | | | | | | | | | | | | | | The comment says that charger_regulators is an array of regulator_bulk_data, which is not true, since it's actually a pointer to 'struct charger_regulator'. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
| * charger-manager: Use replacement variable to check state of batteryChanwoo Choi2012-08-221-3/+0
| | | | | | | | | | | | | | | | | | | | | | This patch remove unnecessary variable(cm->fullbatt_vchk_uV) by using 'desc->fullbatt_uV' field directly in fullbatt_handler() function to check the state of battery. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
* | Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-10-011-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM soc general cleanups from Olof Johansson: "This is a large branch that contains a handful of different cleanups: - Fixing up the I/O space remapping on PCI on ARM. This is a series from Rob Herring that restructures how all pci devices allocate I/O space, and it's part of the work to allow multiplatform kernels. - A number of cleanup series for OMAP, moving and removing some headers, sparse irq rework and in general preparation for multiplatform. - Final removal of all non-DT boards for Tegra, it is now device-tree-only! - Removal of a stale platform, nxp4008. It's an old mobile chipset that is no longer in use, and was very likely never really used with a mainline kernel. We have not been able to find anyone interested in keeping it around in the kernel. - Removal of the legacy dmaengine driver on tegra + A handful of other things that I haven't described above." Fix up some conflicts with the staging tree (and because nxp4008 was removed) * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits) ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6 ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus ARM: mmp: using for_each_set_bit to simplify the code ARM: tegra: harmony: fix ldo7 regulator-name ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ...
| * | ARM: omap: move platform_data definitionsArnd Bergmann2012-09-191-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the omap include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Benoît Cousson" <b-cousson@ti.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Jean Pihet <j-pihet@ti.com> Cc: J Keerthy <j-keerthy@ti.com> Cc: linux-omap@vger.kernel.org
* | power: battery: Generic battery driver using IIOanish kumar2012-09-221-0/+29
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Driver to allow use of the ADC drivers supported by the IIO subsystem for battery status monitoring. Connecting this driver to the relevant IIO device requires registration of the appropriate iio_map structure array by the IIO device driver (usually from platform data). If specified the driver will also make use of a gpio to provide interrupt driven notification that the battery is fully charged. In last version: Addressed concerns raised by lars: a. made the adc_bat per device. b. get the IIO channel using hardcoded channel names. c. Minor issues related to gpio_is_valid and some code refactoring. In V1: Addressed concerns raised by Anton: a. changed the struct name to gab(generic adc battery). b. Added some functions to neaten the code. c. Some minor coding guidelines changes. d. Used the latest function introduce by lars: iio_read_channel_processed to streamline the code. In V2: Addressed concerns by lars: a. No need of allocating memory for channels.Make it array. b. Code restructring, coding style and following kernel guidelines changes suggested by him. In V3: Addressed conerns by Anton: a. Added the copyright. b. Coding guidelines changes suggested by him. c. Added Makefile and Kconfig Signed-off-by: anish kumar <anish198519851985@gmail.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* Merge tag 'for-v3.6' of git://git.infradead.org/battery-2.6Linus Torvalds2012-07-311-1/+66
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull battery updates from Anton Vorontsov: "The tag contains just a few battery-related changes for v3.6. It's is all pretty straightforward, except one thing. One of our patches added thermal support for power supply class, but thermal/ subsystem changed under our feet. We (well, Stephen, that is) caught the issue and it was decided[1] that I'd just delay the battery pull request, and then will fix it up by merging upstream back into battery tree at the specific commit. That's not all though: another[2] small fixup for thermal subsystem was needed to get rid of a warning in power supply subsystem (the warning was not drivers/power's "fault", the thermal registration function just needed a proper const annotation, which is also done by a small commit on top of the merge. So, to sum this up: - The 'master' branch of the battery tree was in the -next tree for weeks, was never rebased, altered etc. It should be all OK; - Although, for-v3.6 tag contains the 'master' branch + merge + the warning fix. [1] http://lkml.org/lkml/2012/6/19/23 [2] http://lkml.org/lkml/2012/6/18/28" * tag 'for-v3.6' of git://git.infradead.org/battery-2.6: (23 commits) thermal: Constify 'type' argument for the registration routine olpc-battery: update CHARGE_FULL_DESIGN property for BYD LiFe batteries olpc-battery: Add VOLTAGE_MAX_DESIGN property charger-manager: Fix build break related to EXTCON lp8727_charger: Move header file into platform_data directory power_supply: Add min/max alert properties for CAPACITY, TEMP, TEMP_AMBIENT bq27x00_battery: Add support for BQ27425 chip charger-manager: Set current limit of regulator for over current protection charger-manager: Use EXTCON Subsystem to detect charger cables for charging test_power: Add VOLTAGE_NOW and BATTERY_TEMP properties test_power: Add support for USB AC source gpio-charger: Use cansleep version of gpio_set_value bq27x00_battery: Add support for power average and health properties sbs-battery: Don't trigger false supply_changed event twl4030_charger: Allow charger to control the regulator that feeds it twl4030_charger: Add backup-battery charging twl4030_charger: Fix some typos max17042_battery: Support CHARGE_COUNTER power supply attribute smb347-charger: Add constant charge and current properties power_supply: Add constant charge_current and charge_voltage properties ...
| * charger-manager: Set current limit of regulator for over current protectionChanwoo Choi2012-07-131-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | This patch support the protection of host device from over current. The Charger-manager set proper current limit of charger(regulator) for charging according to type of charger cable when external connector is attached. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
| * charger-manager: Use EXTCON Subsystem to detect charger cables for chargingChanwoo Choi2012-07-131-1/+58
| | | | | | | | | | | | | | | | | | | | | | | | This patch support that charger-manager use EXTCON(External Connector) Subsystem to detect the state of charger cables for enabling or disabling charger(regulator) and select the charger cable for charging among a number of external cable according to policy of H/W board. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
* | Merge branch 'for_3.6/pm/sr-move' of ↵Tony Lindgren2012-06-261-0/+308
|\ \ | |/ |/| | | git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into devel-driver
| * ARM: OMAP2+: SmartReflex: add POWER_AVS Kconfig optionsJean Pihet2012-05-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a Kconfig menu (POWER_AVS) and rename the Kconfig options for the OMAP SmartReflex implementation: CONFIG_OMAP_SMARTREFLEX renames to CONFIG_POWER_AVS_OMAP CONFIG_OMAP_SMARTREFLEX_CLASS3 renames to CONFIG_POWER_AVS_OMAP_CLASS3 This change makes the SmartReflex implementation ready for the move to drivers/. Signed-off-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: J Keerthy <j-keerthy@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
OpenPOWER on IntegriCloud