summaryrefslogtreecommitdiffstats
path: root/include/linux/mtd/cfi.h
Commit message (Collapse)AuthorAgeFilesLines
* mtd: cfi: Allow per-mapping CFI device endiannessAaron Sierra2012-01-091-8/+8
| | | | | | | | | | | This patch allows each CFI device map to use its own endianness. The globally defined CFI endianness (CONFIG_MTD_CFI_NOSWAP, CONFIG_MTD_CFI_BE_BYTE_SWAP or CONFIG_MTD_CFI_LE_BYTE_SWAP) becomes the default value which can be overridden by a driver for a particular device. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* Fix common misspellingsLucas De Marchi2011-03-311-1/+1
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* mtd: cfi: add support for AMIC flashes (e.g. A29L160AT)Steffen Sledz2011-03-111-0/+1
| | | | | Signed-off-by: Steffen Sledz <sledz@dresearch.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: cfi_fixup: remove unused 'param' parameterGuillaume LECERF2010-12-031-2/+1
| | | | | | | | | The 'param' parameter has never been used since its introduction, so simply remove it. Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: cfi_cmdset_0002: make sector erase command variableGuillaume LECERF2010-10-261-0/+1
| | | | | | | | | Some old SST chips use 0x50 as sector erase command, instead of 0x30. Make this value variable to handle such chips. Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: Update copyright noticesDavid Woodhouse2010-08-081-3/+17
| | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* mtd: chips: use common manufacturer codes in jedec_probe()Wolfram Sang2010-05-141-2/+11
| | | | | | | Factor out old manufacturers and use the generic ones from cfi.h Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: cfi_probe: add support for SST 0x0701 vendornameGuillaume LECERF2010-05-141-0/+1
| | | | | | | | | SST 39VF160x and 39VF320x chips use vendorname id 0x0701 and alternative unlock addresses. Add support for them in cfi_probe.c. Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: move more manufacturers to the common cfi.h header fileGuillaume LECERF2010-02-261-5/+7
| | | | | | | | | | | | Move MANUFACTURER_MACRONIX and MANUFACTURER_SST definitions to the include/linux/mtd/cfi.h header file and rename them to CFI_MFR_MACRONIX and CFI_MFR_SST. All references in drivers/mtd/chips/cfi_cmdset_0002.c are updated to reflect this. Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: quiet sparse noise in cfi.hH Hartley Sweeten2010-02-251-1/+1
| | | | | | | | | | | | | In the inline function cfi_build_cmd_addr, the cast of cmd_ofs to an uint8_t produces a sparse warning of the type: warning: cast truncates bits from constant value (2aa becomes aa) Quiet the warning by masking cmd_ofs with 0xff and remove the cast. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: move manufacturer to the common cfi.h header fileHans-Christian Egtvedt2009-11-301-4/+5
| | | | | | | | | | | | | | This patch moves the MANUFACTURER_ST and MANUFACTURER_INTEL to the include/linux/mtd/cfi.h header file and renames them to CFI_MFR_ST and CFI_MFR_INTEL. CFI_MFR_ST was already present there. All references in drivers/mtd/chips/cfi_cmdset_0001.c are updated to reflect this. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] CFI: remove major/minor version check for command set 0x0002Wolfgang Grandegger2009-01-091-0/+1
| | | | | | | | The NOR Flash memory K8P2815UQB from Samsung uses the major version number '0'. Add a quirk to cope with it. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] [NOR] Fix cfi_send_gen_cmd handling of x16 devices in x8 mode (v4)Eric W. Biederman2008-11-051-3/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | For "unlock" cycles to 16bit devices in 8bit compatibility mode we need to use the byte addresses 0xaaa and 0x555. These effectively match the word address 0x555 and 0x2aa, except the latter has its low bit set. Most chips don't care about the value of the 'A-1' pin in x8 mode, but some -- like the ST M29W320D -- do. So we need to be careful to set it where appropriate. cfi_send_gen_cmd is only ever passed addresses where the low byte is 0x00, 0x55 or 0xaa. Of those, only addresses ending 0xaa are affected by this patch, by masking in the extra low bit when the device is known to be in compatibility mode. [dwmw2: Do it only when (cmd_ofs & 0xff) == 0xaa] v4: Fix stupid typo in cfi_build_cmd_addr that failed to compile I'm writing this patch way to late at night. v3: Bring all of the work back into cfi_build_cmd_addr including calling of map_bankwidth(map) and cfi_interleave(cfi) So every caller doesn't need to. v2: Only modified the address if we our device_type is larger than our bus width. Cc: stable@kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] [NOR] Rename and export new cfi_qry_*() functionsDavid Woodhouse2008-08-071-6/+6
| | | | | | | | | | They need to be exported, so let's give them less generic-sounding names while we're at it. Original export patch, along with the suggestion about the nomenclature, from Stephen Rothwell. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] [NOR] Add qry_mode_on()/qry_omde_off() to deal with odd chipsAlexey Korolev2008-08-061-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | There are some CFI chips which require non standard procedures to get into QRY mode. The possible way to support them would be trying different modes till QRY will be read. This patch introduce two new functions qry_mode_on qry_mode_off. qry_mode_on tries different commands in order switch chip into QRY mode. So if we have one more "odd" chip - we just could add several lines to qry_mode_on. Also using these functions remove unnecessary code duplicaton in porbe procedure. Currently there are two "odd" cases 1. Some old intel chips which require 0xFF before 0x98 2. ST M29DW chip which requires 0x98 to be sent at 0x555 (according to CFI should be 0x55) This patch is partialy based on the patch from Uwe (see "[PATCH 2/4] [RFC][MTD] cfi_probe: remove Intel chip workaround" thread ) Signed-off-by: Alexey Korolev <akorolev@infradead.org> Signed-off-by: Alexander Belyakov <abelyako@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* MTD/JFFS2: remove CVS keywordsAdrian Bunk2008-06-041-1/+0
| | | | | | | | | | | | Once upon a time, the MTD repository was using CVS. This patch therefore removes all usages of the no longer updated CVS keywords from the MTD code. This also includes code that printed them to the user. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NOR] Fix incorrect interface code for x16/x32 chipsBartlomiej Sieka2008-01-101-0/+12
| | | | | | | | | According to "Common Flash Memory Interface Publication 100" dated December 1, 2001, the interface code for x16/x32 chips is 0x0005, and not 0x0004 used so far. Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] Fix CFI build error when no map width or interleave supportedDavid Woodhouse2007-09-061-0/+9
| | | | | | | | | | | | | | When building NOR flash support, you have compile-time options for the bus width and the number of individual chips which are interleaved together onto that bus. The code to deal with arbitrary geometry is a bit convoluted, and people want to just configure it for the specific hardware they have, to avoid the runtime overhead. Selecting _none_ of the available options doesn't make any sense. You should have at least one. This makes it build though, since people persist in trying. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* MTD: Convert Atmel PRI information to AMD formatHaavard Skinnemoen2006-08-161-0/+13
| | | | | | | | | | | | Atmel flash chips don't have PRI information in the same format as AMD flash chips. This patch installs a fixup for all Atmel chips that converts the relevant PRI fields into AMD format. Only the fields that are actually used by the command set is actually converted. The rest are initialized to zero (which should be safe) Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
* Don't include linux/config.h from anywhere else in include/David Woodhouse2006-04-261-1/+0
| | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] CFI: Use 16-bit access to autoselect/read device id dataTodd Poynor2005-11-291-1/+17
| | | | | | | | | | | | | | Recent models of Intel/Sharp and Spansion CFI flash now have significant bits in the upper byte of device ID codes, read via what Spansion calls "autoselect" and Intel calls "read device identifier". Currently these values are truncated to the low 8 bits in the mtd data structures, as all CFI read query info has previously been read one byte at a time. Add a new method for reading 16-bit info, currently just manufacturer and device codes; datasheets hint at future uses for upper bytes in other fields. Signed-off-by: Todd Poynor <tpoynor@mvista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* [PATCH] changing CONFIG_LOCALVERSION rebuilds too much, for no good reasonOlaf Hering2005-11-091-1/+0
| | | | | | | | | | | | | | | | | | | | | This patch removes almost all inclusions of linux/version.h. The 3 #defines are unused in most of the touched files. A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is unfortunatly in linux/version.h. There are also lots of #ifdef for long obsolete kernels, this was not touched. In a few places, the linux/version.h include was move to where the LINUX_VERSION_CODE was used. quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'` search pattern: /UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [MTD] includes: Clean up trailing white spacesThomas Gleixner2005-11-071-12/+12
| | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* {MTD] add support for Intel's "Sibley" flashNicolas Pitre2005-11-061-2/+11
| | | | | | | | | | | | | This updates the Primary Vendor-Specific Extended Query parsing to version 1.4 in order to get the information about the Configurable Programming Mode regions implemented in the Sibley flash, as well as selecting the appropriate write command code. This flash does not behave like traditional NOR flash when writing data. While mtdblock should just work, further changes are needed for JFFS2 use. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* [MTD] XIP for AMD CFI flash.Todd Poynor2005-06-291-11/+1
| | | | | | Author: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: Todd Poynor <tpoynor@mvista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* [MTD] Add the reverse operation of cfi_build_cmd()Thomas Gleixner2005-05-231-1/+64
| | | | | | This is necessary to fix the broken status check in cfi_cmdset_0001 Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* [MTD] Support for protection register support on Intel FLASH chipsNicolas Pitre2005-05-231-2/+2
| | | | | | | | | | This enables support for reading, writing and locking so called "Protection Registers" present on some flash chips. A subset of them are pre-programmed at the factory with a unique set of values. The rest is user-programmable. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* [MTD] Add OTP basiscNicolas Pitre2005-05-231-1/+9
| | | | | | | add structure definition for OTP region info Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-161-0/+394
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
OpenPOWER on IntegriCloud