summaryrefslogtreecommitdiffstats
path: root/include/linux/mmc/dw_mmc.h
Commit message (Collapse)AuthorAgeFilesLines
* mmc: dw_mmc: fix fifo ordering in big endianBen Dooks2015-04-091-2/+2
| | | | | | | | | | | | | | | | The dw_mmc driver changes to make the IO accesors endian agnostic did not take into account the fifo accesses do not need to be swapped. To fix this add a mmci_fifo_read/write wrapper to allow these to be passed through the IO without being swapped. Since these are now specific functions, it would be easier just to store the pointer to the fifo registers in the host block instead of the offset to them. So change the host->data_offset to host->fifo_reg (which also means we catch all the places this is read or written). Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: dw_mmc: Add a timeout for sending CMD11Doug Anderson2015-03-311-0/+2
| | | | | | | | | | | | | In the Designware databook's description of the "Voltage Switch Normal Scenario" it instructs us to set a timer and fail the voltage change if we don't see the voltage change interrupt within 2ms. Let's implement that. Without implementing this I have often been able to reproduce a hang while trying to send CMD11 on an rk3288-based board while constantly ejecting and inserting UHS cards. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: dw_mmc: Protect read-modify-write of INTMASK with a lockDoug Anderson2015-01-191-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We're running into cases where our enabling of the SDIO interrupt in dw_mmc doesn't actually take effect. Specifically, adding patch like this: +++ b/drivers/mmc/host/dw_mmc.c @@ -1076,6 +1076,9 @@ static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb) mci_writel(host, INTMASK, (int_mask | SDMMC_INT_SDIO(slot->id))); + int_mask = mci_readl(host, INTMASK); + if (!(int_mask & SDMMC_INT_SDIO(slot->id))) + dev_err(&mmc->class_dev, "failed to enable sdio irq\n"); } else { ...actually triggers the error message. That's because the dw_mci_enable_sdio_irq() unsafely does a read-modify-write of the INTMASK register. We can't just use the standard host->lock since that lock is not irq safe and mmc_signal_sdio_irq() (called from interrupt context) calls dw_mci_enable_sdio_irq(). Add a new irq-safe lock to protect INTMASK. An alternate solution to this is to punt mmc_signal_sdio_irq() to the tasklet and then protect INTMASK modifications by the standard host lock. This seemed like a bit more of a high-latency change. Reported-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: dw_mmc: add support for the other bit of sdio interruptAddy Ke2014-11-261-0/+3
| | | | | | | | | | | The bit of sdio interrupt is 16 in designware implementation, but it is 24 on Rockchip SoCs.This patch add sdio_id0 for the number of slot0 in the SDIO interrupt registers. Signed-off-by: Addy Ke <addy.ke@rock-chips.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: dw_mmc: Add IDMAC 64-bit address mode supportPrabu Thangamuthu2014-11-261-0/+2
| | | | | | | | | | Synopsys DW_MMC IP core supports Internal DMA Controller with 64-bit address mode from IP version 2.70a onwards. Updated the driver to support IDMAC 64-bit addressing mode. Signed-off-by: Prabu Thangamuthu <prabu.t@synopsys.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: dw_mmc: Remove old card detect infrastructureDoug Anderson2014-11-101-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dw_mmc driver had a bunch of code that ran whenever a card was ejected and inserted. However, this code was old and crufty and should be removed. Some evidence that it's really not needed: 1. Is is supposed to be legal to use 'cd-gpio' on dw_mmc instead of using the built-in card detect mechanism. The 'cd-gpio' code doesn't run any of the crufty old code but yet still works. 2. While looking at this, I realized that my old change (369ac86 mmc: dw_mmc: don't queue up a card detect at slot startup) actually castrated the old code a little bit already and nobody noticed. Specifically "last_detect_state" was left as 0 at bootup. That means that on the first card removal none of the crufty code ran. 3. I can run "while true; do dd if=/dev/mmcblk1 of=/dev/null; done" while ejecting and inserting an SD Card and the world doesn't explode. If some of the crufty old code is actually needed, we should justify it and also put it in some place where it will be run even with "cd-gpio". Note that in my case I'm using the "cd-gpio" mechanism but for various reasons the hardware triggers a dw_mmc "card detect" at bootup. That was actually causing a real bug. The card detect workqueue was running while the system was trying to enumerate the card. The "present != slot->last_detect_state" triggered and we were doing all kinds of crazy stuff and messing up enumeration. The new mechanism of just asking the core to check the card is much safer and then the bogus interrupt doesn't hurt. Signed-off-by: Doug Anderson <dianders@chromium.org> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: alim.akhtar <alim.akhtar@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: dw_mmc: Support voltage changesDoug Anderson2014-09-091-0/+2
| | | | | | | | | | | | For UHS cards we need the ability to switch voltages from 3.3V to 1.8V. Add support to the dw_mmc driver to handle this. Note that dw_mmc needs a little bit of extra code since the interface needs a special bit programmed to the CMD register while CMD11 is progressing. This means adding a few extra states to the state machine to track. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: dw_mmc: use mmc_regulator_get_supply to handle regulatorsYuvaraj CD2014-09-091-1/+1
| | | | | | | | | | | This patch makes use of mmc_regulator_get_supply() to handle the vmmc and vqmmc regulators.Also it moves the code handling the these regulators to dw_mci_set_ios().It turned on the vmmc and vqmmc during MMC_POWER_UP and MMC_POWER_ON,and turned off during MMC_POWER_OFF. Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: dw_mmc: Slot quirk "disable-wp" is deprecated.Jaehoon Chung2014-08-111-0/+2
| | | | | | | | | | | | | Slot quirks "disable-wp" is deprecated. Instead, use the host quirk "disable-wp". (Because the slot-node is removed in dt-file.) Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Sachin Kamat <sachin.kamat@samsung.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: dw_mmc: remove unused member variable.Jaehoon Chung2014-05-121-14/+0
| | | | | | | | | | Since using the device-tree, didn't use the callback pointer. So removed the unused callback pointer. When the set_power callback is used, it should be added in future. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
* mmc: dw_mmc: guarantee stop-abort cmd in data errorsSeungwon Jeon2013-09-251-0/+2
| | | | | | | | | | | | In error cases, DTO interrupt may or may not be generated depending on remained data. Stop/Abort command ensures DTO generation for that situation. Currently if 'stop' field of data is empty, there is no stop/abort command. So, it could hang waiting DTO. This change reinforces these cases. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: control card read thresholdSeungwon Jeon2013-09-251-0/+1
| | | | | | | | | | | Card Read Threshold should be ensured that the card clock does not stop in the middle of a block of data being transferred from the card to the Host. Specially, clock stop is allowed in fast transfer such as HS200 or SDR104 mode. And so, it should be enabled. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: adjust the fifoth with block sizeSeungwon Jeon2013-09-251-0/+1
| | | | | | | | | | This change helps to choose msize, rx_watermark and tx_watermark depending on block size for IDMAC mode. For SDIO block size can be variable, so if these values are set incorrectly, card clock may stop. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: Remove DW_MCI_QUIRK_NO_WRITE_PROTECTDoug Anderson2013-02-241-7/+0
| | | | | | | | | | | | | | The original quirk was added in the change 'mmc: dw_mmc: add quirk to indicate missing write protect line'. The original quirk was added at a controller level even though each slot has its own write protect (so the quirk should be at the slot level). A recent change (mmc: dw_mmc: Add "disable-wp" device tree property) added a slot-level quirk and support for the quirk directly to dw_mmc. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Will Newton <will.newton@imgtec.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: Add "disable-wp" device tree propertyDoug Anderson2013-02-241-0/+9
| | | | | | | | | | | | | | | | | | The "disable-wp" property is used to specify that a given SD card slot doesn't have a concept of write protect. This eliminates the need for special case code for SD slots that should never be write protected (like a micro SD slot or a dev board). The dw_mmc driver is special in needing to specify "disable-wp" because the lack of a "wp-gpios" property means to use the special purpose write protect line. On some other mmc devices the lack of "wp-gpios" means that write protect should be disabled. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: Add sdio power bindingsAbhilash Kesavan2012-12-061-0/+1
| | | | | | | | | Add dt-based retrieval of host sdio pm capabilities. Based on the dt based discovery do a bus init in the resume function. Signed-off-by: Olof Johansson <olofj@chromium.org> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: Standardise capability typeLee Jones2012-12-061-2/+2
| | | | | | | | | There are discrepancies with regards to how MMC capabilities are carried throughout the subsystem. Let's standardise them to eliminate any confusion. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: constify dw_mci_idmac_ops in exynos back-endArnd Bergmann2012-11-071-2/+2
| | | | | | | | | | | | | | | | The of_device_id match data is now marked as const and must not be modified. This changes the dw_mmc to mark all pointers passing the dw_mci_drv_data or dw_mci_dma_ops structures as const, and also marks the static definitions as const. drivers/mmc/host/dw_mmc-exynos.c: In function 'dw_mci_exynos_probe': drivers/mmc/host/dw_mmc-exynos.c:234:11: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Abraham <thomas.abraham@linaro.org> Cc: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: convert the variable type of irqSeungwon Jeon2012-11-071-1/+1
| | | | | | | | | | | Even though platform_get_irq returns error, 'host->irq' always has an unsigned value. Less-than-zero comparison of an unsigned value is never true. Type of 'unsigned int' will be changed for 'int'. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: add support for exynos specific implementation of dw-mshcThomas Abraham2012-10-031-1/+1
| | | | | | | | | | Samsung Exynos SoC's extend the dw-mshc controller for additional clock and bus control. Add support for these extensions and include provide device tree based discovery suppory as well. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: add support for implementation specific callbacksThomas Abraham2012-10-031-0/+4
| | | | | | | | | | | | The core dw-mshc controller driver can let platform specific implementations of the dw-mshc controller to control the hardware as required by such implementations. This is acheived by invoking implementation specific (optional) callbacks. Define the list of callbacks supported the add invocation points for the same. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: add quirk to indicate missing write protect lineThomas Abraham2012-10-031-1/+2
| | | | | | | | | | | | | | | | If the write protect pad of the controller is not connected to the write protect pin of the slot, the driver should be notified of this condition so that incorrect check for write protection by reading the WRTORT register can avoided. The get_ro platform callback can be used for in such cases, but with device tree support enabled, such platform callbacks cannot be supported. Add a new quirk for notifying the driver about the missing write protect line so the driver can assume that the card write protection is disabled. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: lookup for optional biu and ciu clocksThomas Abraham2012-10-031-0/+4
| | | | | | | | | | | | Some platforms allow for clock gating and control of bus interface unit clock and card interface unit clock. Add support for clock lookup of optional biu and ciu clocks for clock gating and clock speed determination. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: convert copy of struct device in struct dw_mci to a referenceThomas Abraham2012-10-031-1/+1
| | | | | | | | | | | | The 'struct dw_mci' maintains a copy of the pdev->dev instance instead of maintaining a reference to that 'struct device' instance. Any resource allocated using the device resource management kernel API with the instance of 'struct device' in 'struct dw_mci' is then incorrect. Fix this by converting the copy of 'struct device' in 'struct dw_mci' to a reference. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: make multiple instances of dw_mci_card_workqueueThomas Abraham2012-05-091-0/+1
| | | | | | | | | | | | | | The variable 'dw_mci_card_workqueue' is a global variable shared between multiple instances of the dw_mmc host controller. Due to this, data corruption has been noticed when multiple instances of dw_mmc controllers are actively reading/writing the media. Fix this by adding a instance of 'struct workqueue_struct' for each host instance and removing the global 'dw_mci_card_workqueue' instance. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: Support of PCI mode in the dw_mmc driverShashidhar Hiremath2012-03-251-2/+6
| | | | | | | | | | | | Support of PCI mode for the dw_mmc driver. This Patch adds the support for the scenario where the Synopsys Designware IP is present on the PCI bus. The patch adds the minimal modifications necessary for the driver to work on PCI platform. Also added separate files for PCI and PLATFORM modes of operation. Signed-off-by: Shashidhar Hiremath <shashidharh@vayavyalabs.com> Acked-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: Fix PIO mode with support of highmemSeungwon Jeon2012-02-131-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current PIO mode makes a kernel crash with CONFIG_HIGHMEM. Highmem pages have a NULL from sg_virt(sg). This patch fixes the following problem. Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted (3.0.15-01423-gdbf465f #589) PC is at dw_mci_pull_data32+0x4c/0x9c LR is at dw_mci_read_data_pio+0x54/0x1f0 pc : [<c0358824>] lr : [<c035988c>] psr: 20000193 sp : c0619d48 ip : c0619d70 fp : c0619d6c r10: 00000000 r9 : 00000002 r8 : 00001000 r7 : 00000200 r6 : 00000000 r5 : e1dd3100 r4 : 00000000 r3 : 65622023 r2 : 0000007f r1 : eeb96000 r0 : e1dd3100 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment xkernel Control: 10c5387d Table: 61e2004a DAC: 00000015 Process swapper (pid: 0, stack limit = 0xc06182f0) Stack: (0xc0619d48 to 0xc061a000) 9d40: e1dd3100 e1a4f000 00000000 e1dd3100 e1a4f000 00000200 9d60: c0619da4 c0619d70 c035988c c03587e4 c0619d9c e18158f4 e1dd3100 e1dd3100 9d80: 00000020 00000000 00000000 00000020 c06e8a84 00000000 c0619e04 c0619da8 9da0: c0359b24 c0359844 e18158f4 e1dd3164 e1dd3168 e1dd3150 3d02fc79 e1dd3154 9dc0: e1dd3178 00000000 00000020 00000000 e1dd3150 00000000 c10dd7e8 e1a84900 9de0: c061e7cc 00000000 00000000 0000008d c06e8a84 c061e780 c0619e4c c0619e08 9e00: c00c4738 c0359a34 3d02fc79 00000000 c0619e4c c05a1698 c05a1670 c05a165c 9e20: c04de8b0 c061e780 c061e7cc e1a84900 ffffed68 0000008d c0618000 00000000 9e40: c0619e6c c0619e50 c00c48b4 c00c46c8 c061e780 c00423ac c061e7cc ffffed68 9e60: c0619e8c c0619e70 c00c7358 c00c487c 0000008d ffffee38 c0618000 ffffed68 9e80: c0619ea4 c0619e90 c00c4258 c00c72b0 c00423ac ffffee38 c0619ecc c0619ea8 9ea0: c004241c c00c4234 ffffffff f8810000 0000006d 00000002 00000001 7fffffff 9ec0: c0619f44 c0619ed0 c0048bc0 c00423c4 220ae7a9 00000000 386f0d30 0005d3a4 9ee0: c00423ac c10dd0b8 c06f2cd8 c0618000 c0594778 c003a674 7fffffff c0619f44 9f00: 386f0d30 c0619f18 c00a6f94 c005be3c 80000013 ffffffff 386f0d30 0005d3a4 9f20: 386f0d30 0005d2d1 c10dd0a8 c10dd0b8 c06f2cd8 c0618000 c0619f74 c0619f48 9f40: c0345858 c005be00 c00a2440 c0618000 c0618000 c00410d8 c06c1944 c00410fc 9f60: c0594778 c003a674 c0619f9c c0619f78 c004a7e8 c03457b4 c0618000 c06c18f8 9f80: 00000000 c0039c70 c06c18d4 c003a674 c0619fb4 c0619fa0 c04ceafc c004a714 9fa0: c06287b4 c06c18f8 c0619ff4 c0619fb8 c0008b68 c04cea68 c0008578 00000000 9fc0: 00000000 c003a674 00000000 10c5387d c0628658 c003aa78 c062f1c4 4000406a 9fe0: 413fc090 00000000 00000000 c0619ff8 40008044 c0008858 00000000 00000000 Backtrace: [<c03587d8>] (dw_mci_pull_data32+0x0/0x9c) from [<c035988c>] (dw_mci_read_data_pio+0x54/0x1f0) r6:00000200 r5:e1a4f000 r4:e1dd3100 [<c0359838>] (dw_mci_read_data_pio+0x0/0x1f0) from [<c0359b24>] (dw_mci_interrupt+0xfc/0x4a4) [<c0359a28>] (dw_mci_interrupt+0x0/0x4a4) from [<c00c4738>] (handle_irq_event_percpu+0x7c/0x1b4) [<c00c46bc>] (handle_irq_event_percpu+0x0/0x1b4) from [<c00c48b4>] (handle_irq_event+0x44/0x64) [<c00c4870>] (handle_irq_event+0x0/0x64) from [<c00c7358>] (handle_fasteoi_irq+0xb4/0x124) r7:ffffed68 r6:c061e7cc r5:c00423ac r4:c061e780 [<c00c72a4>] (handle_fasteoi_irq+0x0/0x124) from [<c00c4258>] (generic_handle_irq+0x30/0x38) r7:ffffed68 r6:c0618000 r5:ffffee38 r4:0000008d [<c00c4228>] (generic_handle_irq+0x0/0x38) from [<c004241c>] (asm_do_IRQ+0x64/0xe0) r5:ffffee38 r4:c00423ac [<c00423b8>] (asm_do_IRQ+0x0/0xe0) from [<c0048bc0>] (__irq_svc+0x80/0x14c) Exception stack(0xc0619ed0 to 0xc0619f18) Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: Add more capabilities fieldSeungwon Jeon2012-01-111-0/+1
| | | | | | | This patch adds another capabilities field for MMC_CAPS2_XXX. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: modify DATA register offsetJaehoon Chung2011-10-261-0/+4
| | | | | | | | | | | | | | In dw_mmc 2.40a spec, Data register's offset is changed. Before we used Data register offset 0x100. but if somebody uses a 2.40a controller, we must use 0x200 for Data register. This patch adds a version-id checking point and uses SDMMC_DATA(x) instead of SDMMC_DATA. It assumes 2.40a is the latest version. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: fix stop when fallen back to PIOJames Hogan2011-07-201-0/+2
| | | | | | | | | | | | | | | | | | | There are several situations when dw_mci_submit_data_dma() decides to fall back to PIO mode instead of using DMA, due to a short (to avoid overhead) or "complex" (e.g. with unaligned buffers) transaction, even though host->use_dma is set. However dw_mci_stop_dma() decides whether to stop DMA or set the EVENT_XFER_COMPLETE event based on host->use_dma. When falling back to PIO mode this results in data timeout errors getting missed and the driver locking up. Therefore add host->using_dma to indicate whether the current transaction is using dma or not, and adjust dw_mci_stop_dma() to use that instead. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Will Newton <will.newton@imgtec.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: handle unaligned buffers and sizesJames Hogan2011-07-201-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | Update functions for PIO pushing and pulling data to and from the FIFO so that they can handle unaligned output buffers and unaligned buffer lengths. This makes more of the tests in mmc_test pass. Unaligned lengths in pulls are handled by reading the full FIFO item, and storing the remaining bytes in a small internal buffer (part_buf). The next data pull will copy data out of this buffer first before accessing the FIFO again. Similarly, for pushes the final bytes that don't fill a FIFO item are stored in the part_buf (or sent anyway if it's the last transfer), and then the part_buf is included at the beginning of the next buffer pushed. Unaligned buffers in pulls are handled specially if the architecture cannot do efficient unaligned accesses, by reading FIFO items into a aligned local buffer, and memcpy'ing them into the output buffer, again storing any remaining bytes in the internal buffer. Similarly for pushes the buffer is memcpy'd into an aligned local buffer then written to the FIFO. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: don't hard code fifo depth, fix usageJames Hogan2011-07-201-0/+8
| | | | | | | | | | | | | | | | | | | The FIFO_DEPTH hardware configuration parameter can be found from the power-on value of RX_WMark in the FIFOTH register. This is used to initialise the watermarks, but when calculating the number of free fifo spaces a preprocessor definition is used which is hard coded to 32. Fix reading the value out of FIFOTH (the default value in the RX_WMark field is FIFO_DEPTH-1 not FIFO_DEPTH). Allow the fifo depth to be overriden by platform data (since a bootloader may have changed FIFOTH making auto-detection unreliable). Store the fifo_depth for later use. Also fix the calculation to find the number of free bytes in the fifo to include the fifo depth in the left shift by the data shift, since the fifo depth is measured in fifo items not bytes. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: convert card tasklet to workqueueJames Hogan2011-07-201-1/+1
| | | | | | | | | | | Convert the card insert/remove tasklet to a workqueue, and call the setpower platform specific callback without the spinlock held. This means neither of the setpower or get_cd callbacks are called from atomic context which allows them to sleep. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: Standardize header file inclusion checks.Robert P. J. Day2011-07-201-3/+3
| | | | | | | | | Standardize the checks for multiple MMC header file inclusion, including adding comments to terminating #endif's, and fixing one incorrect comment. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Chris Ball <cjb@laptop.org>
* Fix common misspellingsLucas De Marchi2011-03-311-2/+2
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* mmc: dw_mmc: support mmc power control with regulatorJaehoon Chung2011-03-171-0/+2
| | | | | | | | | This patch adds support for power regulators. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: kyungmin Park <kyungmin.park@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: fix suspend/resume operationJaehoon Chung2011-03-171-0/+1
| | | | | | | | | | | | | | | | This patch is related to re-init processing on suspend/resume. When card is resuming, some register is reset. If card is removable, maybe controller should be rescan for card. But if assume card is non-removable, need to restore the old value at registers. We store the value of FIFOTH at probe time and then restore it in dw_mci_resume(). Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: add quirks for unreliable card detect, and capabilitiesJaehoon Chung2011-03-171-3/+7
| | | | | | | | | | | | | This patch adds quirks and capabilities to platdata. Some cards don't use the CDn pin; in that case, we assume the card's inserted. Some boards need other capabilities. So, we add capabilities in the board's platdata. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: modify quirks bit-shift controlJaehoon Chung2011-03-151-5/+3
| | | | | | | | | | | | | If we need some quirks, maybe add quirks in future But now, quirks value set to integer..later we should be confused.. So I think that need bit-shift control. And If we need not any quirks, we didn't set anything.. (Need not DW_MCI_QUIRK_NONE) Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
* mmc: dw_mmc: Add Synopsys DesignWare mmc host driver.Will Newton2011-01-081-0/+217
This adds the mmc host driver for the Synopsys DesignWare mmc host controller, found in a number of embedded SoC designs. Signed-off-by: Will Newton <will.newton@imgtec.com> Reviewed-by: Matt Fleming <matt@console-pimps.org> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
OpenPOWER on IntegriCloud