summaryrefslogtreecommitdiffstats
path: root/include/linux/kvm_host.h
Commit message (Collapse)AuthorAgeFilesLines
* KVM: MMU: filter out the mmio pfn from the fault pfnXiao Guangrong2011-07-241-0/+5
| | | | | | | | | | | If the page fault is caused by mmio, the gfn can not be found in memslots, and 'bad_pfn' is returned on gfn_to_hva path, so we can use 'bad_pfn' to identify the mmio page fault. And, to clarify the meaning of mmio pfn, we return fault page instead of bad page when the gfn is not allowd to prefetch Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Steal time implementationGlauber Costa2011-07-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | To implement steal time, we need the hypervisor to pass the guest information about how much time was spent running other processes outside the VM, while the vcpu had meaningful work to do - halt time does not count. This information is acquired through the run_delay field of delayacct/schedstats infrastructure, that counts time spent in a runqueue but not running. Steal time is a per-cpu information, so the traditional MSR-based infrastructure is used. A new msr, KVM_MSR_STEAL_TIME, holds the memory area address containing information about steal time This patch contains the hypervisor part of the steal time infrasructure, and can be backported independently of the guest portion. [avi, yongjie: export delayacct_on, to avoid build failures in some configs] Signed-off-by: Glauber Costa <glommer@redhat.com> Tested-by: Eric B Munson <emunson@mgebm.net> CC: Rik van Riel <riel@redhat.com> CC: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> CC: Peter Zijlstra <peterz@infradead.org> CC: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Yongjie Ren <yongjie.ren@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: introduce kvm_read_guest_cachedGleb Natapov2011-07-121-0/+2
| | | | | | | | | | | | | Introduce kvm_read_guest_cached() function in addition to write one we already have. [ by glauber: export function signature in kvm header ] Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Glauber Costa <glommer@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Tested-by: Eric Munson <emunson@mgebm.net> Signed-off-by: Avi Kivity <avi@redhat.com>
* Merge branch 'linux-next' of ↵Linus Torvalds2011-05-231-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (27 commits) PCI: Don't use dmi_name_in_vendors in quirk PCI: remove unused AER functions PCI/sysfs: move bus cpuaffinity to class dev_attrs PCI: add rescan to /sys/.../pci_bus/.../ PCI: update bridge resources to get more big ranges when allocating space (again) KVM: Use pci_store/load_saved_state() around VM device usage PCI: Add interfaces to store and load the device saved state PCI: Track the size of each saved capability data area PCI/e1000e: Add and use pci_disable_link_state_locked() x86/PCI: derive pcibios_last_bus from ACPI MCFG PCI: add latency tolerance reporting enable/disable support PCI: add OBFF enable/disable support PCI: add ID-based ordering enable/disable support PCI hotplug: acpiphp: assume device is in state D0 after powering on a slot. PCI: Set PCIE maxpayload for card during hotplug insertion PCI/ACPI: Report _OSC control mask returned on failure to get control x86/PCI: irq and pci_ids patch for Intel Panther Point DeviceIDs PCI: handle positive error codes PCI: check pci_vpd_pci22_wait() return PCI: Use ICH6_GPIO_EN in ich6_lpc_acpi_gpio ... Fix up trivial conflicts in include/linux/pci_ids.h: commit a6e5e2be4461 moved the intel SMBUS ID definitons to the i2c-i801.c driver.
| * KVM: Use pci_store/load_saved_state() around VM device usageAlex Williamson2011-05-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | Store the device saved state so that we can reload the device back to the original state when it's unassigned. This has the benefit that the state survives across pci_reset_function() calls via the PCI sysfs reset interface while the VM is using the device. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Avi Kivity <avi@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | KVM: make guest mode entry to be rcu quiescent stateGleb Natapov2011-05-221-0/+9
| | | | | | | | | | | | | | | | | | | | | | KVM does not hold any references to rcu protected data when it switches CPU into a guest mode. In fact switching to a guest mode is very similar to exiting to userspase from rcu point of view. In addition CPU may stay in a guest mode for quite a long time (up to one time slice). Lets treat guest mode as quiescent state, just like we do with user-mode execution. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* | KVM: Fix off by one in kvm_for_each_vcpu iterationJeff Mahoney2011-05-111-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch avoids gcc issuing the following warning when KVM_MAX_VCPUS=1: warning: array subscript is above array bounds kvm_for_each_vcpu currently checks to see if the index for the vcpu is valid /after/ loading it. We don't run into problems because the address is still inside the enclosing struct kvm and we never deference or write to it, so this isn't a security issue. The warning occurs when KVM_MAX_VCPUS=1 because the increment portion of the loop will *always* cause the loop to load an invalid location since ++idx will always be > 0. This patch moves the load so that the check occurs before the load and we don't run into the compiler warning. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* | KVM: 16-byte mmio supportAvi Kivity2011-05-111-1/+6
| | | | | | | | | | | | | | | | | | Since sse instructions can issue 16-byte mmios, we need to support them. We can't increase the kvm_run mmio buffer size to 16 bytes without breaking compatibility, so instead we break the large mmios into two smaller 8-byte ones. Since the bus is 64-bit we aren't breaking any atomicity guarantees. Signed-off-by: Avi Kivity <avi@redhat.com>
* | Revert "KVM: Fix race between nmi injection and enabling nmi window"Marcelo Tosatti2011-05-111-1/+0
| | | | | | | | | | | | | | | | This reverts commit f86368493ec038218e8663cc1b6e5393cd8e008a. Simpler fix to follow. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* | KVM: cleanup memslot_id functionXiao Guangrong2011-05-111-1/+5
|/ | | | | | | We can get memslot id from memslot->id directly Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Fix race between nmi injection and enabling nmi windowAvi Kivity2011-03-171-0/+1
| | | | | | | | | | | | | | | | | | | | | The interrupt injection logic looks something like if an nmi is pending, and nmi injection allowed inject nmi if an nmi is pending request exit on nmi window the problem is that "nmi is pending" can be set asynchronously by the PIT; if it happens to fire between the two if statements, we will request an nmi window even though nmi injection is allowed. On SVM, this has disasterous results, since it causes eflags.TF to be set in random guest code. The fix is simple; make nmi_pending synchronous using the standard vcpu->requests mechanism; this ensures the code above is completely synchronous wrt nmi_pending. Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: use yield_to instead of sleep in kvm_vcpu_on_spinRik van Riel2011-03-171-0/+1
| | | | | | | | | | | | Instead of sleeping in kvm_vcpu_on_spin, which can cause gigantic slowdowns of certain workloads, we instead use yield_to to get another VCPU in the same KVM guest to run sooner. This seems to give a 10-15% speedup in certain workloads. Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: keep track of which task is running a KVM vcpuRik van Riel2011-03-171-0/+1
| | | | | | | | | | | | | Keep track of which task is running a KVM vcpu. This helps us figure out later what task to wake up if we want to boost a vcpu that got preempted. Unfortunately there are no guarantees that the same task always keeps the same vcpu, so we can only track the task across a single "run" of the vcpu. Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: make make_all_cpus_request() locklessXiao Guangrong2011-03-171-6/+0
| | | | | | | | | Now, we have 'vcpu->mode' to judge whether need to send ipi to other cpus, this way is very exact, so checking request bit is needless, then we can drop the spinlock let it's collateral Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Add "exiting guest mode" stateXiao Guangrong2011-03-171-5/+17
| | | | | | | | | | | | | | | | Currently we keep track of only two states: guest mode and host mode. This patch adds an "exiting guest mode" state that tells us that an IPI will happen soon, so unless we need to wait for the IPI, we can avoid it completely. Also 1: No need atomically to read/write ->mode in vcpu's thread 2: reorganize struct kvm_vcpu to make ->mode and ->requests in the same cache line explicitly Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Fix build error on s390 due to missing tlbs_dirtyAvi Kivity2011-01-121-1/+1
| | | | | | Make it available for all archs. Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: MMU: Make the way of accessing lpage_info more genericTakuya Yoshikawa2011-01-121-4/+6
| | | | | | | | | | | | Large page information has two elements but one of them, write_count, alone is accessed by a helper function. This patch replaces this helper function with more generic one which returns newly named kvm_lpage_info structure and use it to access the other element rmap_pde. Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: MMU: delay flush all tlbs on sync_page pathXiao Guangrong2011-01-121-0/+2
| | | | | | | | | | Quote from Avi: | I don't think we need to flush immediately; set a "tlb dirty" bit somewhere | that is cleareded when we flush the tlb. kvm_mmu_notifier_invalidate_page() | can consult the bit and force a flush if set. Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: PPC: Fix compile warningAlexander Graf2011-01-121-0/+2
| | | | | | | | | | | | | | | KVM compilation fails with the following warning: include/linux/kvm_host.h: In function 'kvm_irq_routing_update': include/linux/kvm_host.h:679:2: error: 'struct kvm' has no member named 'irq_routing' That function is only used and reasonable to have on systems that implement an in-kernel interrupt chip. PPC doesn't. Fix by #ifdef'ing it out when no irqchip is available. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: fast-path msi injection with irqfdMichael S. Tsirkin2011-01-121-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | Store irq routing table pointer in the irqfd object, and use that to inject MSI directly without bouncing out to a kernel thread. While we touch this structure, rearrange irqfd fields to make fastpath better packed for better cache utilization. This also adds some comments about locking rules and rcu usage in code. Some notes on the design: - Use pointer into the rt instead of copying an entry, to make it possible to use rcu, thus side-stepping locking complexities. We also save some memory this way. - Old workqueue code is still used for level irqs. I don't think we DTRT with level anyway, however, it seems easier to keep the code around as it has been thought through and debugged, and fix level later than rip out and re-instate it later. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Gregory Haskins <ghaskins@novell.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Refactor IRQ names of assigned devicesJan Kiszka2011-01-121-0/+1
| | | | | | | | | Cosmetic change, but it helps to correlate IRQs with PCI devices. Acked-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: Switch assigned device IRQ forwarding to threaded handlerJan Kiszka2011-01-121-10/+2
| | | | | | | | | | | | | | | | This improves the IRQ forwarding for assigned devices: By using the kernel's threaded IRQ scheme, we can get rid of the latency-prone work queue and simplify the code in the same run. Moreover, we no longer have to hold assigned_dev_lock while raising the guest IRQ, which can be a lenghty operation as we may have to iterate over all VCPUs. The lock is now only used for synchronizing masking vs. unmasking of INTx-type IRQs, thus is renames to intx_lock. Acked-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: Clean up vm creation and releaseJan Kiszka2011-01-121-1/+14
| | | | | | | | | | | | IA64 support forces us to abstract the allocation of the kvm structure. But instead of mixing this up with arch-specific initialization and doing the same on destruction, split both steps. This allows to move generic destruction calls into generic code. It also fixes error clean-up on failures of kvm_create_vm for IA64. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: pre-allocate one more dirty bitmap to avoid vmalloc()Takuya Yoshikawa2011-01-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently x86's kvm_vm_ioctl_get_dirty_log() needs to allocate a bitmap by vmalloc() which will be used in the next logging and this has been causing bad effect to VGA and live-migration: vmalloc() consumes extra systime, triggers tlb flush, etc. This patch resolves this issue by pre-allocating one more bitmap and switching between two bitmaps during dirty logging. Performance improvement: I measured performance for the case of VGA update by trace-cmd. The result was 1.5 times faster than the original one. In the case of live migration, the improvement ratio depends on the workload and the guest memory size. In general, the larger the memory size is the more benefits we get. Note: This does not change other architectures's logic but the allocation size becomes twice. This will increase the actual memory consumption only when the new size changes the number of pages allocated by vmalloc(). Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: propagate fault r/w information to gup(), allow read-only memoryMarcelo Tosatti2011-01-121-1/+4
| | | | | | | | As suggested by Andrea, pass r/w error code to gup(), upgrading read fault to writable if host pte allows it. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Add PV MSR to enable asynchronous page faults delivery.Gleb Natapov2011-01-121-0/+1
| | | | | | | | Guest enables async PF vcpu functionality using this MSR. Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: Add memory slot versioning and use it to provide fast guest write interfaceGleb Natapov2011-01-121-0/+7
| | | | | | | | | | | Keep track of memslots changes by keeping generation number in memslots structure. Provide kvm_write_guest_cached() function that skips gfn_to_hva() translation if memslots was not changed since previous invocation. Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: Halt vcpu if page it tries to access is swapped outGleb Natapov2011-01-121-0/+31
| | | | | | | | | | | | | | | | If a guest accesses swapped out memory do not swap it in from vcpu thread context. Schedule work to do swapping and put vcpu into halted state instead. Interrupts will still be delivered to the guest and if interrupt will cause reschedule guest will continue to run another task. [avi: remove call to get_user_pages_noio(), nacked by Linus; this makes everything synchrnous again] Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* Merge branch 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2010-10-241-3/+19
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (321 commits) KVM: Drop CONFIG_DMAR dependency around kvm_iommu_map_pages KVM: Fix signature of kvm_iommu_map_pages stub KVM: MCE: Send SRAR SIGBUS directly KVM: MCE: Add MCG_SER_P into KVM_MCE_CAP_SUPPORTED KVM: fix typo in copyright notice KVM: Disable interrupts around get_kernel_ns() KVM: MMU: Avoid sign extension in mmu_alloc_direct_roots() pae root address KVM: MMU: move access code parsing to FNAME(walk_addr) function KVM: MMU: audit: check whether have unsync sps after root sync KVM: MMU: audit: introduce audit_printk to cleanup audit code KVM: MMU: audit: unregister audit tracepoints before module unloaded KVM: MMU: audit: fix vcpu's spte walking KVM: MMU: set access bit for direct mapping KVM: MMU: cleanup for error mask set while walk guest page table KVM: MMU: update 'root_hpa' out of loop in PAE shadow path KVM: x86 emulator: Eliminate compilation warning in x86_decode_insn() KVM: x86: Fix constant type in kvm_get_time_scale KVM: VMX: Add AX to list of registers clobbered by guest switch KVM guest: Move a printk that's using the clock before it's ready KVM: x86: TSC catchup mode ...
| * KVM: Fix signature of kvm_iommu_map_pages stubJan Kiszka2010-10-241-2/+1
| | | | | | | | | | | | | | | | Breaks otherwise if CONFIG_IOMMU_API is not set. KVM-Stable-Tag. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
| * KVM: x86: Rename timer functionZachary Amsden2010-10-241-1/+1
| | | | | | | | | | | | | | | | This just changes some names to better reflect the usage they will be given. Separated out to keep confusion to a minimum. Signed-off-by: Zachary Amsden <zamsden@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
| * KVM: Check for pending events before attempting injectionAvi Kivity2010-10-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of blindly attempting to inject an event before each guest entry, check for a possible event first in vcpu->requests. Sites that can trigger event injection are modified to set KVM_REQ_EVENT: - interrupt, nmi window opening - ppr updates - i8259 output changes - local apic irr changes - rflags updates - gif flag set - event set on exit This improves non-injecting entry performance, and sets the stage for non-atomic injection. Signed-off-by: Avi Kivity <avi@redhat.com>
| * KVM: MMU: Add infrastructure for two-level page walkerJoerg Roedel2010-10-241-0/+5
| | | | | | | | | | | | | | | | | | This patch introduces a mmu-callback to translate gpa addresses in the walk_addr code. This is later used to translate l2_gpa addresses into l1_gpa addresses. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
| * KVM: MMU: rewrite audit_mappings_page() functionXiao Guangrong2010-10-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a bugs in this function, we call gfn_to_pfn() and kvm_mmu_gva_to_gpa_read() in atomic context(kvm_mmu_audit() is called under the spinlock(mmu_lock)'s protection). This patch fix it by: - introduce gfn_to_pfn_atomic instead of gfn_to_pfn - get the mapping gfn from kvm_mmu_page_get_gfn() And it adds 'notrap' ptes check in unsync/direct sps Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
| * KVM: MMU: introduce gfn_to_page_many_atomic() functionXiao Guangrong2010-10-241-0/+3
| | | | | | | | | | | | | | | | Introduce this function to get consecutive gfn's pages, it can reduce gup's overload, used by later patch Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
| * KVM: MMU: introduce hva_to_pfn_atomic functionXiao Guangrong2010-10-241-0/+7
| | | | | | | | | | | | | | | | Introduce hva_to_pfn_atomic(), it's the fast path and can used in atomic context, the later patch will use it Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* | kvm: add __rcu annotationsArnd Bergmann2010-08-191-1/+1
|/ | | | | | | | Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Avi Kivity <avi@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
* KVM: Convert mask notifiers to use irqchip/pin instead of gsiGleb Natapov2010-08-021-1/+2
| | | | | | | | | Devices register mask notifier using gsi, but irqchip knows about irqchip/pin, so conversion from irqchip/pin to gsi should be done before looking for mask notifier to call. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: Return EFAULT from kvm ioctl when guest accesses bad areaGleb Natapov2010-08-021-0/+1
| | | | | | | | | | Currently if guest access address that belongs to memory slot but is not backed up by page or page is read only KVM treats it like MMIO access. Remove that capability. It was never part of the interface and should not be relied upon. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Keep slot ID in memory slot structureAvi Kivity2010-08-011-0/+1
| | | | | | | May be used for distinguishing between internal and user slots, or for sorting slots in size order. Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Reduce atomic operations on vcpu->requestsAvi Kivity2010-08-011-1/+6
| | | | | | | | | | Usually the vcpu->requests bitmap is sparse, so a test_and_clear_bit() for each request generates a large number of unneeded atomics if a bit is set. Replace with a separate test/clear sequence. This is safe since there is no clear_bit() outside the vcpu thread. Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Add mini-API for vcpu->requestsAvi Kivity2010-08-011-0/+15
| | | | | | Makes it a little more readable and hackable. Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Remove memory alias supportAvi Kivity2010-08-011-6/+0
| | | | | | | As advertised in feature-removal-schedule.txt. Equivalent support is provided by overlapping memory regions. Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: VMX: Enable XSAVE/XRSTOR for guestDexuan Cui2010-08-011-1/+1
| | | | | | | | | | | | | This patch enable guest to use XSAVE/XRSTOR instructions. We assume that host_xcr0 would use all possible bits that OS supported. And we loaded xcr0 in the same way we handled fpu - do it as late as we can. Signed-off-by: Dexuan Cui <dexuan.cui@intel.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Get rid of KVM_REQ_KICKAvi Kivity2010-08-011-0/+1
| | | | | | | | | | KVM_REQ_KICK poisons vcpu->requests by having a bit set during normal operation. This causes the fast path check for a clear vcpu->requests to fail all the time, triggering tons of atomic operations. Fix by replacing KVM_REQ_KICK with a vcpu->guest_mode atomic. Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Avoid killing userspace through guest SRAO MCE on unmapped pagesHuang Ying2010-08-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | In common cases, guest SRAO MCE will cause corresponding poisoned page be un-mapped and SIGBUS be sent to QEMU-KVM, then QEMU-KVM will relay the MCE to guest OS. But it is reported that if the poisoned page is accessed in guest after unmapping and before MCE is relayed to guest OS, userspace will be killed. The reason is as follows. Because poisoned page has been un-mapped, guest access will cause guest exit and kvm_mmu_page_fault will be called. kvm_mmu_page_fault can not get the poisoned page for fault address, so kernel and user space MMIO processing is tried in turn. In user MMIO processing, poisoned page is accessed again, then userspace is killed by force_sig_info. To fix the bug, kvm_mmu_page_fault send HWPOISON signal to QEMU-KVM and do not try kernel and user space MMIO processing for poisoned page. [xiao: fix warning introduced by avi] Reported-by: Max Asbock <masbock@linux.vnet.ibm.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Let vcpu structure alignment be determined at runtimeAvi Kivity2010-05-191-1/+1
| | | | | | | vmx and svm vcpus have different contents and therefore may have different alignmment requirements. Let each specify its required alignment. Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Get rid of dead function gva_to_page()Gui Jianfeng2010-05-171-1/+0
| | | | | | | Nobody use gva_to_page() anymore, get rid of it. Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: use the correct RCU API for PROVE_RCU=yLai Jiangshan2010-05-171-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The RCU/SRCU API have already changed for proving RCU usage. I got the following dmesg when PROVE_RCU=y because we used incorrect API. This patch coverts rcu_deference() to srcu_dereference() or family API. =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- arch/x86/kvm/mmu.c:3020 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by qemu-system-x86/8550: #0: (&kvm->slots_lock){+.+.+.}, at: [<ffffffffa011a6ac>] kvm_set_memory_region+0x29/0x50 [kvm] #1: (&(&kvm->mmu_lock)->rlock){+.+...}, at: [<ffffffffa012262d>] kvm_arch_commit_memory_region+0xa6/0xe2 [kvm] stack backtrace: Pid: 8550, comm: qemu-system-x86 Not tainted 2.6.34-rc4-tip-01028-g939eab1 #27 Call Trace: [<ffffffff8106c59e>] lockdep_rcu_dereference+0xaa/0xb3 [<ffffffffa012f6c1>] kvm_mmu_calculate_mmu_pages+0x44/0x7d [kvm] [<ffffffffa012263e>] kvm_arch_commit_memory_region+0xb7/0xe2 [kvm] [<ffffffffa011a5d7>] __kvm_set_memory_region+0x636/0x6e2 [kvm] [<ffffffffa011a6ba>] kvm_set_memory_region+0x37/0x50 [kvm] [<ffffffffa015e956>] vmx_set_tss_addr+0x46/0x5a [kvm_intel] [<ffffffffa0126592>] kvm_arch_vm_ioctl+0x17a/0xcf8 [kvm] [<ffffffff810a8692>] ? unlock_page+0x27/0x2c [<ffffffff810bf879>] ? __do_fault+0x3a9/0x3e1 [<ffffffffa011b12f>] kvm_vm_ioctl+0x364/0x38d [kvm] [<ffffffff81060cfa>] ? up_read+0x23/0x3d [<ffffffff810f3587>] vfs_ioctl+0x32/0xa6 [<ffffffff810f3b19>] do_vfs_ioctl+0x495/0x4db [<ffffffff810e6b2f>] ? fget_light+0xc2/0x241 [<ffffffff810e416c>] ? do_sys_open+0x104/0x116 [<ffffffff81382d6d>] ? retint_swapgs+0xe/0x13 [<ffffffff810f3ba6>] sys_ioctl+0x47/0x6a [<ffffffff810021db>] system_call_fastpath+0x16/0x1b Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: limit the number of pages per memory slotTakuya Yoshikawa2010-05-171-0/+6
| | | | | | | | This patch limits the number of pages per memory slot to make us free from extra care about type issues. Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
OpenPOWER on IntegriCloud