summaryrefslogtreecommitdiffstats
path: root/include/linux/ftrace.h
Commit message (Collapse)AuthorAgeFilesLines
* KSYM_SYMBOL_LEN fixesHugh Dickins2008-12-101-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Miles Lane tailing /sys files hit a BUG which Pekka Enberg has tracked to my 966c8c12dc9e77f931e2281ba25d2f0244b06949 sprint_symbol(): use less stack exposing a bug in slub's list_locations() - kallsyms_lookup() writes a 0 to namebuf[KSYM_NAME_LEN-1], but that was beyond the end of page provided. The 100 slop which list_locations() allows at end of page looks roughly enough for all the other stuff it might print after the symbol before it checks again: break out KSYM_SYMBOL_LEN earlier than before. Latencytop and ftrace and are using KSYM_NAME_LEN buffers where they need KSYM_SYMBOL_LEN buffers, and vmallocinfo a 2*KSYM_NAME_LEN buffer where it wants a KSYM_SYMBOL_LEN buffer: fix those before anyone copies them. [akpm@linux-foundation.org: ftrace.h needs module.h] Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc Miles Lane <miles.lane@gmail.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Steven Rostedt <srostedt@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ftrace: remove ftrace hashSteven Rostedt2008-10-231-5/+3
| | | | | | | | | | | The ftrace hash was used by the ftrace_daemon code. The record ip function would place the calling address (ip) into the hash. The daemon would later read the hash and modify that code. The hash complicates the code. This patch removes it. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: remove mcount setSteven Rostedt2008-10-231-1/+0
| | | | | | | | The arch dependent function ftrace_mcount_set was only used by the daemon start up code. This patch removes it. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: only have ftrace_kill atomicSteven Rostedt2008-10-231-2/+1
| | | | | | | | | | | | | When an anomaly is detected, we need a way to completely disable ftrace. Right now we have two functions: ftrace_kill and ftrace_kill_atomic. The ftrace_kill tries to do it in a "nice" way by converting everything back to a nop. The "nice" way is dangerous itself, so this patch removes it and only has the "atomic" version, which is all that is needed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: return error on failed modified text.Steven Rostedt2008-10-231-2/+22
| | | | | | | | | | | | | Have the ftrace_modify_code return error values: -EFAULT on error of reading the address -EINVAL if what is read does not match what it expected -EPERM if the write fails to update after a successful match. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: rename FTRACE to FUNCTION_TRACERSteven Rostedt2008-10-201-6/+6
| | | | | | | | | | | | Due to confusion between the ftrace infrastructure and the gcc profiling tracer "ftrace", this patch renames the config options from FTRACE to FUNCTION_TRACER. The other two names that are offspring from FTRACE DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same. This patch was generated mostly by script, and partially by hand. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* tracing/fastboot: add better resolution to initcall debug/tracingTim Bird2008-10-141-2/+2
| | | | | | | | | | | | | | | | | Change the time resolution for initcall_debug to microseconds, from milliseconds. This is handy to determine which initcalls you want to work on for faster booting. One one of my test machines, over 90% of the initcalls are less than a millisecond and (without this patch) these are all reported as 0 msecs. Working on the 900 us ones is more important than the 4 us ones. With 'quiet' on the kernel command line, this adds no significant overhead to kernel boot time. Signed-off-by: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* tracing/fastboot: only trace non-module initcallsFrederic Weisbecker2008-10-141-0/+2
| | | | | | | | | | | At this time, only built-in initcalls interest us. We can't really produce a relevant graph if we include the modules initcall too. I had good results after this patch (see svg in attachment). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: ktime.h not included in ftrace.hSteven Noonan2008-10-141-0/+1
| | | | | | | | | | Including <linux/ktime.h> eliminates the following error: include/linux/ftrace.h:220: error: expected specifier-qualifier-list before 'ktime_t' Signed-off-by: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* tracing/fastboot: build fixIngo Molnar2008-10-141-2/+2
| | | | | | | | | fix: In file included from kernel/sysctl.c:52: include/linux/ftrace.h:217: error: 'KSYM_NAME_LEN' undeclared here (not in a function) Signed-off-by: Ingo Molnar <mingo@elte.hu>
* tracing/fastboot: get the initcall name before it disappearsFrederic Weisbecker2008-10-141-3/+4
| | | | | | | | | | | | | After some initcall traces, some initcall names may be inconsistent. That's because these functions will disappear from the .init section and also their name from the symbols table. So we have to copy the name of the function in a buffer large enough during the trace appending. It is not costly for the ring_buffer because the number of initcall entries is commonly not really large. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* tracing/fastboot: change the printing of boot tracer according to bootgraph.plFrederic Weisbecker2008-10-141-0/+2
| | | | | | | | | | | | Change the boot tracer printing to make it parsable for the scripts/bootgraph.pl script. We have now to output two lines for each initcall, according to the printk in do_one_initcall() in init/main.c We need now the call's time and the return's time. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* tracing/ftrace: add the boot tracerFrédéric Weisbecker2008-10-141-0/+19
| | | | | | | | | | | | | | | | Add the boot/initcall tracer. It's primary purpose is to be able to trace the initcalls. It is intended to be used with scripts/bootgraph.pl after some small improvements. Note that it is not active after its init. To avoid tracing (and so crashing) before the whole tracing engine init, you have to explicitly call start_boot_trace() after do_pre_smp_initcalls() to enable it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: use ftrace_release for all dynamic ftrace functionsSteven Rostedt2008-10-141-4/+5
| | | | | | | | ftrace_release is necessary for all uses of dynamic ftrace and not just the archs that have CONFIG_FTRACE_MCOUNT_RECORD defined. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: fix incorrect comment style of __ftrace_enabled_save()Huang Ying2008-10-141-2/+4
| | | | | | | This patch fixes incorrect comment style of __ftrace_enabled_save(). Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: ftrace_kill_atomic() build fixIngo Molnar2008-10-141-0/+1
| | | | | | | | | fix: kernel/built-in.o: In function `ftrace_dump': (.text+0x2e2ea): undefined reference to `ftrace_kill_atomic' Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: build fixIngo Molnar2008-10-141-1/+4
| | | | | | | | | | | fix: In file included from init/main.c:65: include/linux/ftrace.h:166: error: expected ‘,' or ‘;' before ‘{' token make[1]: *** [init/main.o] Error 1 make: *** [init/main.o] Error 2 Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: dump out ftrace buffers to console on panicSteven Rostedt2008-10-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | At OLS I had a lot of interest to be able to have the ftrace buffers dumped on panic. Usually one would expect to uses kexec and examine the buffers after a new kernel is loaded. But sometimes the resources do not permit kdump and kexec, so having an option to still see the sequence of events up to the crash is very advantageous. This patch adds the option to have the ftrace buffers dumped to the console in the latency_trace format on a panic. When the option is set, the default entries per CPU buffer are lowered to 16384, since the writing to the serial (if that is the console) may take an awful long time otherwise. [ Changes since -v1: Got alpine to send correctly (as well as spell check working). Removed config option. Moved the static variables into ftrace_dump itself. Gave printk a log level. ] Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: ftrace_printk doc movedSteven Rostedt2008-10-141-1/+18
| | | | | | | | | | Based on Randy Dunlap's suggestion, the ftrace_printk kernel-doc belongs with the ftrace_printk macro that should be used. Not with the __ftrace_printk internal function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: printk formatting infrastructureSteven Rostedt2008-10-141-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a feature that can help kernel developers debug their code using ftrace. int ftrace_printk(const char *fmt, ...); This records into the ftrace buffer using printf formatting. The entry size in the buffers are still a fixed length. A new type has been added that allows for more entries to be used for a single recording. The start of the print is still the same as the other entries. It returns the number of characters written to the ftrace buffer. For example: Having a module with the following code: static int __init ftrace_print_test(void) { ftrace_printk("jiffies are %ld\n", jiffies); return 0; } Gives me: insmod-5441 3...1 7569us : ftrace_print_test: jiffies are 4296626666 for the latency_trace file and: insmod-5441 [03] 1959.370498: ftrace_print_test jiffies are 4296626666 for the trace file. Note: Only the infrastructure should go into the kernel. It is to help facilitate debugging for other kernel developers. Calls to ftrace_printk is not intended to be left in the kernel, and should be frowned upon just like scattering printks around in the code. But having this easily at your fingertips helps the debugging go faster and bugs be solved quicker. Maybe later on, we can hook this with markers and have their printf format be sucked into ftrace output. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: remove old pointers to mcountSteven Rostedt2008-10-141-0/+2
| | | | | | | | | | | | | | | | | | | | When a mcount pointer is recorded into a table, it is used to add or remove calls to mcount (replacing them with nops). If the code is removed via removing a module, the pointers still exist. At modifying the code a check is always made to make sure the code being replaced is the code expected. In-other-words, the code being replaced is compared to what it is expected to be before being replaced. There is a very small chance that the code being replaced just happens to look like code that calls mcount (very small since the call to mcount is relative). To remove this chance, this patch adds ftrace_release to allow module unloading to remove the pointers to mcount within the module. Another change for init calls is made to not trace calls marked with __init. The tracing can not be started until after init is done anyway. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: enable mcount recording for modulesSteven Rostedt2008-10-141-0/+3
| | | | | | | | | | | This patch enables the loading of the __mcount_section of modules and changing all the callers of mcount into nops. The modification is done before the init_module function is called, so again, we do not need to use kstop_machine to make these changes. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: mcount call site on boot nops coreSteven Rostedt2008-10-141-0/+6
| | | | | | | | | | | | | | | | | This is the infrastructure to the converting the mcount call sites recorded by the __mcount_loc section into nops on boot. It also allows for using these sites to enable tracing as normal. When the __mcount_loc section is used, the "ftraced" kernel thread is disabled. This uses the current infrastructure to record the mcount call sites as well as convert them to nops. The mcount function is kept as a stub on boot up and not converted to the ftrace_record_ip function. We use the ftrace_record_ip to only record from the table. This patch does not handle modules. That comes with a later patch. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* kexec jump: __ftrace_enabled_save/restoreHuang Ying2008-08-151-0/+21
| | | | | | | | | | | | | | | | Add __ftrace_enabled_save/restore, used to disable ftrace for a while. Now, this is used by kexec jump, which need a version without lock, for general situation, a locked version should be used. Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ftrace: add ftrace_kill_atomicSteven Rostedt2008-07-111-0/+1
| | | | | | | | | | | | | It has been suggested that I add a way to disable the function tracer on an oops. This code adds a ftrace_kill_atomic. It is not meant to be used in normal situations. It will disable the ftrace tracer, but will not perform the nice shutdown that requires scheduling. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: freeze kprobe'd recordsAbhishek Sagar2008-06-231-1/+5
| | | | | | | | | | | | | | Let records identified as being kprobe'd be marked as "frozen". The trouble with records which have a kprobe installed on their mcount call-site is that they don't get updated. So if such a function which is currently being traced gets its tracing disabled due to a new filter rule (or because it was added to the notrace list) then it won't be updated and continue being traced. This patch allows scanning of all frozen records during tracing to check if they should be traced. Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: store mcount address in rec->ipAbhishek Sagar2008-06-231-2/+1
| | | | | | | | | | | | Record the address of the mcount call-site. Currently all archs except sparc64 record the address of the instruction following the mcount call-site. Some general cleanups are entailed. Storing mcount addresses in rec->ip enables looking them up in the kprobe hash table later on to check if they're kprobe'd. Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com> Cc: davem@davemloft.net Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: prevent freeing of all failed updatesAbhishek Sagar2008-06-101-0/+1
| | | | | | | | | | | | Prevent freeing of records which cause problems and correspond to function from core kernel text. A new flag, FTRACE_FL_CONVERTED is used to mark a record as "converted". All other records are patched lazily to NOPs. Failed records now also remain on frace_hash table. Each invocation of ftrace_record_ip now checks whether the traced function has ever been recorded (including past failures) and doesn't re-record it again. Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: user update and disable dynamic ftrace daemonSteven Rostedt2008-06-021-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In dynamic ftrace, the mcount function starts off pointing to a stub function that just returns. On start up, the call to the stub is modified to point to a "record_ip" function. The job of the record_ip function is to add the function to a pre-allocated hash list. If the function is already there, it simply is ignored, otherwise it is added to the list. Later, a ftraced daemon wakes up and calls kstop_machine if any functions have been recorded, and changes the calls to the recorded functions to a simple nop. If no functions were recorded, the daemon goes back to sleep. The daemon wakes up once a second to see if it needs to update any newly recorded functions into nops. Usually it does not, but if a lot of code has been executed for the first time in the kernel, the ftraced daemon will call kstop_machine to update those into nops. The problem currently is that there's no way to stop the daemon from doing this, and it can cause unneeded latencies (800us which for some is bothersome). This patch adds a new file /debugfs/tracing/ftraced_enabled. If the daemon is active, reading this will return "enabled\n" and "disabled\n" when the daemon is not running. To disable the daemon, the user can echo "0" or "disable" into this file, and "1" or "enable" to re-enable the daemon. Since the daemon is used to convert the functions into nops to increase the performance of the system, I also added that anytime something is written into the ftraced_enabled file, kstop_machine will run if there are new functions that have been detected that need to be converted. This way the user can disable the daemon but still be able to control the conversion of the mcount calls to nops by simply, "echo 0 > /debugfs/tracing/ftraced_enabled" when they need to do more conversions. To see the number of converted functions: "cat /debugfs/tracing/dyn_ftrace_total_info" Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: fix mergeIngo Molnar2008-05-281-1/+1
| | | | Signed-off-by: Ingo Molnar <mingo@elte.hu>
* ftrace: set_ftrace_notrace featureSteven Rostedt2008-05-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While debugging latencies in the RT kernel, I found that it would be nice to be able to filter away functions from the trace than just to filter on functions. I added a new interface to the debugfs tracing directory called set_ftrace_notrace When dynamic frace is enabled, this lets you filter away functions that will not be recorded in the trace. It is similar to adding 'notrace' to those functions but by doing it without recompiling the kernel. Here's how set_ftrace_filter and set_ftrace_notrace interact. Remember, if set_ftrace_filter is set, it removes all functions from the trace execpt for those listed in the set_ftrace_filter. set_ftrace_notrace will prevent those functions from being traced. If you were to set one function in both set_ftrace_filter and set_ftrace_notrace and that function was the same, then you would end up with an empty trace. the set of functions to trace is: set_ftrace_filter == empty then all functions not in set_ftrace_notrace else set of the set_ftrace_filter and not in set of set_ftrace_notrace. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: fix build bugIngo Molnar2008-05-231-4/+4
| | | | | Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: fix include file dependencyIngo Molnar2008-05-231-0/+1
| | | | | Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: stacktrace fixIngo Molnar2008-05-231-0/+8
| | | | | Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: add stack tracingIngo Molnar2008-05-231-0/+2
| | | | | Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: build fixIngo Molnar2008-05-231-5/+5
| | | | | Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: disable tracing on failureSteven Rostedt2008-05-231-0/+3
| | | | | | | | | | | | | | Since ftrace touches practically every function. If we detect any anomaly, we want to fully disable ftrace. This patch adds code to try shutdown ftrace as much as possible without doing any more harm is something is detected not quite correct. This only kills ftrace, this patch does have checks for other parts of the tracer (irqsoff, wakeup, etc.). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace - fix dynamic ftrace memory leakSteven Rostedt2008-05-231-3/+4
| | | | | | | | | | | | | | | | | | | | The ftrace dynamic function update allocates a record to store the instruction pointers that are being modified. If the modified instruction pointer fails to update, then the record is marked as failed and nothing more is done. Worse, if the modification fails, but the record ip function is still called, it will allocate a new record and try again. In just a matter of time, will this cause a serious memory leak and crash the system. This patch plugs this memory leak. When a record fails, it is included back into the pool of records to be used. Now a record may fail over and over again, but the number of allocated records will not increase. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: startup tester on dynamic tracing.Steven Rostedt2008-05-231-0/+2
| | | | | | | | | | | | | | This patch adds a startup self test on dynamic code modification and filters. The test filters on a specific function, makes sure that no other function is traced, exectutes the function, then makes sure that the function is traced. This patch also fixes a slight bug with the ftrace selftest, where tracer_enabled was not being set. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: cleanupsIngo Molnar2008-05-231-1/+1
| | | | | | | factor out code and clean it up. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: force recordingSteven Rostedt2008-05-231-0/+4
| | | | | Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: fix kexecIngo Molnar2008-05-231-0/+7
| | | | | | | | disable the tracer while kexec pulls the rug from under the old kernel. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: add filter select functions to traceSteven Rostedt2008-05-231-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds two files to the debugfs system: /debugfs/tracing/available_filter_functions and /debugfs/tracing/set_ftrace_filter The available_filter_functions lists all functions that has been recorded by the ftraced that has called the ftrace_record_ip function. This is to allow users to see what functions have been converted to nops and can be enabled for tracing. To enable functions, simply echo the names (whitespace delimited) into set_ftrace_filter. Simple wildcards are also allowed. echo 'scheduler' > /debugfs/tracing/set_ftrace_filter Will have only the scheduler be activated when tracing is enabled. echo 'sched_*' > /debugfs/tracing/set_ftrace_filter Will have only the functions starting with 'sched_' be activated. echo '*lock' > /debugfs/tracing/set_ftrace_filter Will have only functions ending with 'lock' be activated. echo '*lock*' > /debugfs/tracing/set_ftrace_filter Will have only functions with 'lock' in its name be activated. Note: 'sched*lock' will not work. The only wildcards that are allowed is an asterisk and the beginning and or end of the string passed in. Multiple names can be passed in with whitespace delimited: echo 'scheduler *lock *acpi*' > /debugfs/tracing/set_ftrace_filter is also the same as: echo 'scheduler' > /debugfs/tracing/set_ftrace_filter echo '*lock' >> /debugfs/tracing/set_ftrace_filter echo '*acpi*' >> /debugfs/tracing/set_ftrace_filter Appending does just that. It appends to the list. To disable all filters simply echo an empty line in: echo > /debugfs/tracing/set_ftrace_filter Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: use dynamic patching for updating mcount callsSteven Rostedt2008-05-231-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch replaces the indirect call to the mcount function pointer with a direct call that will be patched by the dynamic ftrace routines. On boot up, the mcount function calls the ftace_stub function. When the dynamic ftrace code is initialized, the ftrace_stub is replaced with a call to the ftrace_record_ip, which records the instruction pointers of the locations that call it. Later, the ftraced daemon will call kstop_machine and patch all the locations to nops. When a ftrace is enabled, the original calls to mcount will now be set top call ftrace_caller, which will do a direct call to the registered ftrace function. This direct call is also patched when the function that should be called is updated. All patching is performed by a kstop_machine routine to prevent any type of race conditions that is associated with modifying code on the fly. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: move memory management out of arch codeSteven Rostedt2008-05-231-7/+11
| | | | | | | | | | This patch moves the memory management of the ftrace records out of the arch code and into the generic code making the arch code simpler. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: add ftrace_enabled sysctl to disable mcount functionSteven Rostedt2008-05-231-0/+6
| | | | | | | | | | | | | | | This patch adds back the sysctl ftrace_enabled. This time it is defaulted to on, if DYNAMIC_FTRACE is configured. When ftrace_enabled is disabled, the ftrace function is set to the stub return. If DYNAMIC_FTRACE is also configured, on ftrace_enabled = 0, the registered ftrace functions will all be set to jmps, but no more new calls to ftrace recording (used to find the ftrace calling sites) will be called. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: dynamic enabling/disabling of function callsSteven Rostedt2008-05-231-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a feature to dynamically replace the ftrace code with the jmps to allow a kernel with ftrace configured to run as fast as it can without it configured. The way this works, is on bootup (if ftrace is enabled), a ftrace function is registered to record the instruction pointer of all places that call the function. Later, if there's still any code to patch, a kthread is awoken (rate limited to at most once a second) that performs a stop_machine, and replaces all the code that was called with a jmp over the call to ftrace. It only replaces what was found the previous time. Typically the system reaches equilibrium quickly after bootup and there's no code patching needed at all. e.g. call ftrace /* 5 bytes */ is replaced with jmp 3f /* jmp is 2 bytes and we jump 3 forward */ 3: When we want to enable ftrace for function tracing, the IP recording is removed, and stop_machine is called again to replace all the locations of that were recorded back to the call of ftrace. When it is disabled, we replace the code back to the jmp. Allocation is done by the kthread. If the ftrace recording function is called, and we don't have any record slots available, then we simply skip that call. Once a second a new page (if needed) is allocated for recording new ftrace function calls. A large batch is allocated at boot up to get most of the calls there. Because we do this via stop_machine, we don't have to worry about another CPU executing a ftrace call as we modify it. But we do need to worry about NMI's so all functions that might be called via nmi must be annotated with notrace_nmi. When this code is configured in, the NMI code will not call notrace. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: trace preempt off critical timingsSteven Rostedt2008-05-231-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | Add preempt off timings. A lot of kernel core code is taken from the RT patch latency trace that was written by Ingo Molnar. This adds "preemptoff" and "preemptirqsoff" to /debugfs/tracing/available_tracers Now instead of just tracing irqs off, preemption off can be selected to be recorded. When this is selected, it shares the same files as irqs off timings. One can either trace preemption off, irqs off, or one or the other off. By echoing "preemptoff" into /debugfs/tracing/current_tracer, recording of preempt off only is performed. "irqsoff" will only record the time irqs are disabled, but "preemptirqsoff" will take the total time irqs or preemption are disabled. Runtime switching of these options is now supported by simpling echoing in the appropriate trace name into /debugfs/tracing/current_tracer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: trace irq disabled critical timingsSteven Rostedt2008-05-231-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds latency tracing for critical timings (how long interrupts are disabled for). "irqsoff" is added to /debugfs/tracing/available_tracers Note: tracing_max_latency also holds the max latency for irqsoff (in usecs). (default to large number so one must start latency tracing) tracing_thresh threshold (in usecs) to always print out if irqs off is detected to be longer than stated here. If irq_thresh is non-zero, then max_irq_latency is ignored. Here's an example of a trace with ftrace_enabled = 0 ======= preemption latency trace v1.1.5 on 2.6.24-rc7 Signed-off-by: Ingo Molnar <mingo@elte.hu> -------------------------------------------------------------------- latency: 100 us, #3/3, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0) ----------------- => started at: _spin_lock_irqsave+0x2a/0xb7 => ended at: _spin_unlock_irqrestore+0x32/0x5f _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / swapper-0 1d.s3 0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000]) swapper-0 1d.s3 100us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000]) swapper-0 1d.s3 100us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f) vim:ft=help ======= And this is a trace with ftrace_enabled == 1 ======= preemption latency trace v1.1.5 on 2.6.24-rc7 -------------------------------------------------------------------- latency: 102 us, #12/12, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0) ----------------- => started at: _spin_lock_irqsave+0x2a/0xb7 => ended at: _spin_unlock_irqrestore+0x32/0x5f _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / swapper-0 1dNs3 0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000]) swapper-0 1dNs3 46us : e1000_read_phy_reg+0x16/0x225 [e1000] (e1000_update_stats+0x5e2/0x64c [e1000]) swapper-0 1dNs3 46us : e1000_swfw_sync_acquire+0x10/0x99 [e1000] (e1000_read_phy_reg+0x49/0x225 [e1000]) swapper-0 1dNs3 46us : e1000_get_hw_eeprom_semaphore+0x12/0xa6 [e1000] (e1000_swfw_sync_acquire+0x36/0x99 [e1000]) swapper-0 1dNs3 47us : __const_udelay+0x9/0x47 (e1000_read_phy_reg+0x116/0x225 [e1000]) swapper-0 1dNs3 47us+: __delay+0x9/0x50 (__const_udelay+0x45/0x47) swapper-0 1dNs3 97us : preempt_schedule+0xc/0x84 (__delay+0x4e/0x50) swapper-0 1dNs3 98us : e1000_swfw_sync_release+0xc/0x55 [e1000] (e1000_read_phy_reg+0x211/0x225 [e1000]) swapper-0 1dNs3 99us+: e1000_put_hw_eeprom_semaphore+0x9/0x35 [e1000] (e1000_swfw_sync_release+0x50/0x55 [e1000]) swapper-0 1dNs3 101us : _spin_unlock_irqrestore+0xe/0x5f (e1000_update_stats+0x641/0x64c [e1000]) swapper-0 1dNs3 102us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000]) swapper-0 1dNs3 102us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f) vim:ft=help ======= Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ftrace: tracer for scheduler wakeup latencySteven Rostedt2008-05-231-4/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the tracer that tracks the wakeup latency of the highest priority waking task. "wakeup" is added to /debugfs/tracing/available_tracers Also added to /debugfs/tracing tracing_max_latency holds the current max latency for the wakeup wakeup_thresh if set to other than zero, a log will be recorded for every wakeup that takes longer than the number entered in here (usecs for all counters) (deletes previous trace) Examples: (with ftrace_enabled = 0) ============ preemption latency trace v1.1.5 on 2.6.24-rc8 Signed-off-by: Ingo Molnar <mingo@elte.hu> -------------------------------------------------------------------- latency: 26 us, #2/2, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- | task: migration/0-3 (uid:0 nice:-5 policy:1 rt_prio:99) ----------------- _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / quilt-8551 0d..3 0us+: wake_up_process+0x15/0x17 <ffffffff80233e80> (sched_exec+0xc9/0x100 <ffffffff80235343>) quilt-8551 0d..4 26us : sched_switch_callback+0x73/0x81 <ffffffff80338d2f> (schedule+0x483/0x6d5 <ffffffff8048b3ee>) vim:ft=help ============ (with ftrace_enabled = 1) ============ preemption latency trace v1.1.5 on 2.6.24-rc8 -------------------------------------------------------------------- latency: 36 us, #45/45, CPU#0 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- | task: migration/1-5 (uid:0 nice:-5 policy:1 rt_prio:99) ----------------- _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / bash-10653 1d..3 0us : wake_up_process+0x15/0x17 <ffffffff80233e80> (sched_exec+0xc9/0x100 <ffffffff80235343>) bash-10653 1d..3 1us : try_to_wake_up+0x271/0x2e7 <ffffffff80233dcf> (sub_preempt_count+0xc/0x7a <ffffffff8023309e>) bash-10653 1d..2 2us : try_to_wake_up+0x296/0x2e7 <ffffffff80233df4> (update_rq_clock+0x9/0x20 <ffffffff802303f3>) bash-10653 1d..2 2us : update_rq_clock+0x1e/0x20 <ffffffff80230408> (__update_rq_clock+0xc/0x90 <ffffffff80230366>) bash-10653 1d..2 3us : __update_rq_clock+0x1b/0x90 <ffffffff80230375> (sched_clock+0x9/0x29 <ffffffff80214529>) bash-10653 1d..2 4us : try_to_wake_up+0x2a6/0x2e7 <ffffffff80233e04> (activate_task+0xc/0x3f <ffffffff8022ffca>) bash-10653 1d..2 4us : activate_task+0x2d/0x3f <ffffffff8022ffeb> (enqueue_task+0xe/0x66 <ffffffff8022ff66>) bash-10653 1d..2 5us : enqueue_task+0x5b/0x66 <ffffffff8022ffb3> (enqueue_task_rt+0x9/0x3c <ffffffff80233351>) bash-10653 1d..2 6us : try_to_wake_up+0x2ba/0x2e7 <ffffffff80233e18> (check_preempt_wakeup+0x12/0x99 <ffffffff80234f84>) [...] bash-10653 1d..5 33us : tracing_record_cmdline+0xcf/0xd4 <ffffffff80338aad> (_spin_unlock+0x9/0x33 <ffffffff8048d3ec>) bash-10653 1d..5 34us : _spin_unlock+0x19/0x33 <ffffffff8048d3fc> (sub_preempt_count+0xc/0x7a <ffffffff8023309e>) bash-10653 1d..4 35us : wakeup_sched_switch+0x65/0x2ff <ffffffff80339f66> (_spin_lock_irqsave+0xc/0xa9 <ffffffff8048d08b>) bash-10653 1d..4 35us : _spin_lock_irqsave+0x19/0xa9 <ffffffff8048d098> (add_preempt_count+0xe/0x77 <ffffffff8023311a>) bash-10653 1d..4 36us : sched_switch_callback+0x73/0x81 <ffffffff80338d2f> (schedule+0x483/0x6d5 <ffffffff8048b3ee>) vim:ft=help ============ The [...] was added here to not waste your email box space. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
OpenPOWER on IntegriCloud