summaryrefslogtreecommitdiffstats
path: root/include/asm-powerpc/ppc-pci.h
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] powerpc: properly configure DDR/P5IOC children devsJohn Rose2006-03-161-0/+1
| | | | | | | | | | | The dynamic add path for PCI Host Bridges can fail to configure children adapters under P5IOC controllers. It fails to properly fixup bus/device resources, and it fails to properly enable EEH. Both of these steps need to occur before any children devices are enabled in pci_bus_add_devices(). Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: Save device BARs much earlier in the boot sequenceLinas Vepstas2006-01-101-2/+1
| | | | | | | | | | 241-eeh-save-bars-earlier.patch Save the PCI device bars *before* any PCI probing is done. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> (cherry picked from 76c902b919098860f3d4e125f847abcc4cb1782a commit)
* [PATCH] powerpc: Don't continue with PCI Error recovery if slot reset failed.Linas Vepstas2006-01-101-1/+3
| | | | | | | | | | | | 238-eeh-stop-if-reset_failed.patch If the firmware is unable to reset the PCI slot for some reason, then don't attempt any further recovery steps after that point. Instead, mark the device as permanently failed. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> (cherry picked from e06b942521eb2cdaf232726f45a820d5837acb12 commit)
* [PATCH] powerpc: Remove duplicate codeLinas Vepstas2006-01-101-0/+3
| | | | | | | | | | | 234-eeh-find-pe.patch The find_device_pe() routine is duplicated in two files. Remove one of the two copies, declare the other extern. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> (cherry picked from 48408e708282d4d0269136ff27ea5acbd9410b5a commit)
* [PATCH] powerpc: Split out PCI address cache to its own fileLinas Vepstas2006-01-101-0/+8
| | | | | | | | | | | | | | | 25-pci-address-cache.patch The core EEH file is rather large. This patch splits out a self-contained chunk of it into its own file. This is the chunk that performes the caching and lookup of pci devices based on the i/o addresses of thier resoures. This code is almos architecture-independent and could be used by any system that wanted to find a pci device based only on the i/o address used by the device. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> (cherry picked from b0b291d59906d4a9a89ed9e34d9fd684c7188924 commit)
* [PATCH] powerpc: PCI Error Recovery: PPC64 core recovery routinesLinas Vepstas2006-01-101-0/+9
| | | | | | | | | | Various PCI bus errors can be signaled by newer PCI controllers. The core error recovery routines are architecture dependent. This patch adds a recovery infrastructure for the PPC64 pSeries systems. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> (cherry picked from e8ca11b460c4c9c7fa6b529be221529ebd770e38 commit)
* [PATCH] powerpc: sanitize header files for user space includesArnd Bergmann2006-01-091-0/+2
| | | | | | | | | | | | | | | include/asm-ppc/ had #ifdef __KERNEL__ in all header files that are not meant for use by user space, include/asm-powerpc does not have this yet. This patch gets us a lot closer there. There are a few cases where I was not sure, so I left them out. I have verified that no CONFIG_* symbols are used outside of __KERNEL__ any more and that there are no obvious compile errors when including any of the headers in user space libraries. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
* powerpc: Merge pci.hPaul Mackerras2005-11-191-2/+0
| | | | | | | | | | This involves some minor changes: a few unused functions that the ppc32 pci.c provides are no longer declared here or exported; pcibios_assign_all_busses now just refers to the pci_assign_all_buses variable on both 32-bit and 64-bit; pcibios_scan_all_fns is now just 0 instead of a function that always returns 0 on 64-bit. Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: pci_64 fixes & cleanupsBenjamin Herrenschmidt2005-11-161-1/+0
| | | | | | | | | | | | | | | | I discovered that in some cases (PowerMac for example) we wouldn't properly map the PCI IO space on recent kernels. In addition, the code for initializing PCI host bridges was scattered all over the place with some duplication between platforms. This patch fixes the problem and does a small cleanup by creating a pcibios_alloc_controller() in pci_64.c that is similar to the one in pci_32.c (just takes an additional device node argument) that takes care of all the grunt allocation and initialisation work. It should work for both boot time and dynamically allocated PHBs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] ppc64: mark failed devicesLinas Vepstas2005-11-101-0/+7
| | | | | | | | | | | | 17-eeh-slot-marking-bug.patch A device that experiences a PCI outage may be just one deivce out of many that was affected. In order to avoid repeated reports of a failure, the entire tree of affected devices should be marked as failed. This patch marks up the entire tree. Signed-off-by: Linas Vepstas <linas@linas.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] ppc64: Save & restore of PCI device BARSLinas Vepstas2005-11-101-0/+23
| | | | | | | | | | | | | | | | | 14-eeh-device-bar-save.patch After a PCI device has been resest, the device BAR's and other config space info must be restored to the same state as they were in when the firmware first handed us this device. This will allow the PCI device driver, when restarted, to correctly recognize and set up the device. Tis patch saves the device config space as early as reasonable after the firmware has handed over the device. Te state resore funcion is inteded for use by the EEH recovery routines. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] ppc64: PCI reset support routinesLinas Vepstas2005-11-101-0/+14
| | | | | | | | | | | | | | 13-eeh-recovery-support-routines.patch EEH Recovery support routines This patch adds routines required to help drive the recovery of EEH-frozen slots. The main function is to drive the PCI #RST signal line high for a qurter of a second, and then allow for a second & a half of settle time. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] ppc64: PCI address cache minor fixesLinas Vepstas2005-11-101-4/+0
| | | | | | | | | | | | | | | 03-eeh-addr-cache-cleanup.patch This is a minor patch to clean up a buglet related to the PCI address cache. (The buglet doesn't manifes itself unless there are also bugs elsewhere, which is why its minor.). Also: -- Improved debug printing. -- Declare some private routines as static -- Adds reference counting to struct pci_dn->pcidev structure Signed-off-by: Linas Vepstas <linas@linas.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] ppc64: uniform usage of bus unit id interfaceslinas2005-11-101-0/+4
| | | | | | | | | | | | | 01-pci-dn-uniformization.patch This patch changes the rtas_pci interface to use the new struct pci_dn structure for two routines that work with pci device nodes. This patch also does some minor janitorial work: it uses some handy macros and cleans up some trailing whitespace in the affected file. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] dlpar enable for OF pci probeJohn Rose2005-11-071-0/+1
| | | | | | | | | This patch contains the arch/ppc64 bits for enabling DLPAR and PCI Hotplug for the new OF-based PCI probe mechanism. This code path is currently broken. Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* powerpc: Move iSeries_pci.c to powerpc/platform/iseriesStephen Rothwell2005-09-281-0/+54
and rename it to pci.c. This also required moving arch/ppc64/kernel/pci.h into include/asm-powerpc (called ppc-pci.h. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
OpenPOWER on IntegriCloud