summaryrefslogtreecommitdiffstats
path: root/include/asm-powerpc/machdep.h
Commit message (Collapse)AuthorAgeFilesLines
* [POWERPC] Implement arch disable/enable irq hooks.Scott Wood2007-12-211-0/+13
| | | | | | | | | | | | | | | | These hooks ensure that a decrementer interrupt is not pending when suspending; otherwise, problems may occur on 6xx/7xx/7xxx-based systems (except for powermacs, which use a separate suspend path). For example, with deep sleep on the 831x, a pending decrementer will cause a system freeze because the SoC thinks the decrementer interrupt would have woken the system, but the core must have interrupts disabled due to the setup required for deep sleep. Changed via-pmu.c to use the new ppc_md hooks, and made the arch_* functions call the generic_* functions unconditionally. -- paulus Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Merge 32 and 64 bits pcibios_enable_deviceBenjamin Herrenschmidt2007-12-201-6/+4
| | | | | | | | | | This merge the two implementations, based on the previously fixed up 32 bits one. The pcibios_enable_device_hook in ppc_md is now available for ppc64 use. Also remove the new unused "initial" parameter from it and fixup users. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Merge PCI resource fixupsBenjamin Herrenschmidt2007-12-201-7/+7
| | | | | | | | | | | | | | The PCI code in 32 and 64 bits fixes up resources differently. 32 bits uses a header quirk plus handles bridges in pcibios_fixup_bus() while 64 bits does things in various places depending on whether you are using OF probing, using PCI hotplug, etc... This merges those by basically using the 32 bits approach for both, with various tweaks to make 64 bits work with the new approach. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Add machine initcall macrosGrant Likely2007-12-201-0/+23
| | | | | | | | The machine initcall macros allow initcalls to be registered which test machine_is() before executing the initcall. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Use 1TB segmentsPaul Mackerras2007-10-121-4/+4
| | | | | | | | | | | | | | | | | | | | This makes the kernel use 1TB segments for all kernel mappings and for user addresses of 1TB and above, on machines which support them (currently POWER5+, POWER6 and PA6T). We detect that the machine supports 1TB segments by looking at the ibm,processor-segment-sizes property in the device tree. We don't currently use 1TB segments for user addresses < 1T, since that would effectively prevent 32-bit processes from using huge pages unless we also had a way to revert to using 256MB segments. That would be possible but would involve extra complications (such as keeping track of which segment size was used when HPTEs were inserted) and is not addressed here. Parts of this patch were originally written by Ben Herrenschmidt. Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Only call ppc_md.setup_arch() if it is providedGrant Likely2007-10-111-1/+1
| | | | | | | | This allows platforms which don't have anything to do at setup_arch time (like a bunch of the 4xx platforms) to eliminate an empty setup_arch hook. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Pass the pci_controller into pci_exclude_deviceKumar Gala2007-06-291-1/+1
| | | | | | | | | | There are times that we need to know which controller we are on to decide how to exclude devices properly. We now pass the pci_controller that we are going to use down to the pci_exclude_device function. This will greatly simplify being able to exclude the PHBs in multiple controller setups. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] PowerPC MSI infrastructureMichael Ellerman2007-05-081-0/+8
| | | | | | | | | | | | | This provides the architecture specific hooks to support MSI on powerpc. We implement the newly added arch_setup_msi_irqs() and arch_teardown_msi_irqs(), and then delegate to ppc_md routines. Platforms that don't implement MSI will leave the ppc_md calls blank, arch_msi_check_device() will detect this and return ENOSYS. Drivers should detect this error and continue to use LSI. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Rip out the existing powerpc msi stubsMichael Ellerman2007-05-081-5/+0
| | | | | | | | Rip out the existing powerpc msi stubs. These were the start of an implementation based on ppc_md calls, but were never used in mainline. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] DART iommu suspendJohannes Berg2007-05-071-0/+5
| | | | | | | | | | This implements save and restore hooks for IOMMUs and implements it the DART iommu. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] powermac: Support G5 CPU hotplugJohannes Berg2007-05-071-0/+1
| | | | | | | | | | | | This allows "hotplugging" of CPUs on G5 machines. CPUs that are disabled are put into an idle loop with the decrementer frequency set to minimum. To wake them up again we kick them just like when bringing them up. To stop those CPUs from messing with any global state we stop them from entering the timer interrupt. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Generic check_legacy_ioportOlaf Hering2007-04-271-3/+0
| | | | | | | | | | | check_legacy_ioport makes only sense on PREP, CHRP and pSeries. They may have an isa node with PS/2, parport, floppy and serial ports. Remove the check_legacy_ioport call from ppc_md, it's not needed anymore. Hardware capabilities come from the device-tree. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Merge 32 and 64 bits asm-powerpc/io.hBenjamin Herrenschmidt2006-12-041-2/+2
| | | | | | | | | | | | | powerpc: Merge 32 and 64 bits asm-powerpc/io.h The rework on io.h done for the new hookable accessors made it easier, so I just finished the work and merged 32 and 64 bits io.h for arch/powerpc. arch/ppc still uses the old version in asm-ppc, there is just too much gunk in there that I really can't be bothered trying to cleanup. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Allow hooking of PCI MMIO & PIO accessors on 64 bitsBenjamin Herrenschmidt2006-12-041-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reworks the way iSeries hooks on PCI IO operations (both MMIO and PIO) and provides a generic way for other platforms to do so (we have need to do that for various other platforms). While reworking the IO ops, I ended up doing some spring cleaning in io.h and eeh.h which I might want to split into 2 or 3 patches (among others, eeh.h had a lot of useless stuff in it). A side effect is that EEH for PIO should work now (it used to pass IO ports down to the eeh address check functions which is bogus). Also, new are MMIO "repeat" ops, which other archs like ARM already had, and that we have too now: readsb, readsw, readsl, writesb, writesw, writesl. In the long run, I might also make EEH use the hooks instead of wrapping at the toplevel, which would make things even cleaner and relegate EEH completely in platforms/iseries, but we have to measure the performance impact there (though it's really only on MMIO reads) Since I also need to hook on ioremap, I shuffled the functions a bit there. I introduced ioremap_flags() to use by drivers who want to pass explicit flags to ioremap (and it can be hooked). The old __ioremap() is still there as a low level and cannot be hooked, thus drivers who use it should migrate unless they know they want the low level version. The patch "arch provides generic iomap missing accessors" (should be number 4 in this series) is a pre-requisite to provide full iomap API support with this patch. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Generic OF platform driver for PCI host bridges.Benjamin Herrenschmidt2006-12-041-0/+4
| | | | | | | | | | | | | | | | | When enabled in Kconfig, it will pick up any of_platform_device matching it's match list (currently type "pci", "pcix", "pcie", or "ht" and setup a PHB for it. Platform must provide a ppc_md.pci_setup_phb() for it to work (for doing the necessary initialisations specific to a given PHB like setting up the config space ops). It's currently only available on 64 bits as the 32 bits PCI code can't quite cope with it in it's current form. I will fix that later. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Refactor 64 bits DMA operationsBenjamin Herrenschmidt2006-12-041-2/+2
| | | | | | | | | | | | | | | | | This patch completely refactors DMA operations for 64 bits powerpc. 32 bits is untouched for now. We use the new dev_archdata structure to add the dma operations pointer and associated data to struct device. While at it, we also add the OF node pointer and numa node. In the future, we might want to look into merging that with pci_dn as well. The old vio, pci-iommu and pci-direct DMA ops are gone. They are now replaced by a set of generic iommu and direct DMA ops (non PCI specific) that can be used by bus types. The toplevel implementation is now inline. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Remove ppc_md.pci_map_irq & ppc_swizzle for ARCH=powerpcBenjamin Herrenschmidt2006-12-041-4/+0
| | | | | | | | | | | | | | These were inherited from ARCH=ppc, but are not needed since parsing of interrupts should be done via the of_* functions (who can do swizzling). If we ever need to do non-standard swizzling on bridges without a device-node, then we might add back a slightly different version of ppc_md.pci_swizzle but for now, that is not the case. I removed the couple of calls for these in 83xx. If that breaks something, then there is a problem with the device-tree on these. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Make pci_read_irq_line the defaultBenjamin Herrenschmidt2006-12-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | This patch reworks the way IRQs are fixed up on PCI for arch powerpc. It makes pci_read_irq_line() called by default in the PCI code for devices that are probed, and add an optional per-device fixup in ppc_md for platforms that really need to correct what they obtain from pci_read_irq_line(). It also removes ppc_md.irq_bus_setup which was only used by pSeries and should not be needed anymore. I've also removed the pSeries s7a workaround as it can't work with the current interrupt code anyway. I'm trying to get one of these machines working so I can test a proper fix for that problem. I also haven't updated the old-style fixup code from 85xx_cds.c because it's actually buggy :) It assigns pci_dev->irq hard coded numbers which is no good with the new IRQ mapping code. It should at least use irq_create_mapping(NULL, hard_coded_number); and possibly also set_irq_type() to set them as level low. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix up after irq changesOlaf Hering2006-10-071-1/+1
| | | | | | | | | Remove struct pt_regs * from all handlers. Also remove the regs argument from get_irq() functions. Compile tested with arch/powerpc/config/* and arch/ppc/configs/prep_defconfig Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Add new interrupt mapping core and change platforms to use itBenjamin Herrenschmidt2006-07-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the new irq remapper core and removes the old one. Because there are some fundamental conflicts with the old code, like the value of NO_IRQ which I'm now setting to 0 (as per discussions with Linus), etc..., this commit also changes the relevant platform and driver code over to use the new remapper (so as not to cause difficulties later in bisecting). This patch removes the old pre-parsing of the open firmware interrupt tree along with all the bogus assumptions it made to try to renumber interrupts according to the platform. This is all to be handled by the new code now. For the pSeries XICS interrupt controller, a single remapper host is created for the whole machine regardless of how many interrupt presentation and source controllers are found, and it's set to match any device node that isn't a 8259. That works fine on pSeries and avoids having to deal with some of the complexities of split source controllers vs. presentation controllers in the pSeries device trees. The powerpc i8259 PIC driver now always requests the legacy interrupt range. It also has the feature of being able to match any device node (including NULL) if passed no device node as an input. That will help porting over platforms with broken device-trees like Pegasos who don't have a proper interrupt tree. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] kdump: Reserve the existing TCE mappings left by the first kernelHaren Myneni2006-06-281-0/+2
| | | | | | | | | | | | | | | | | | | | | | During kdump boot, noticed some machines checkstop on dma protection fault for ongoing DMA left in the first kernel. Instead of initializing TCE entries in iommu_init() for the kdump boot, this patch fixes this issue by walking through the each TCE table and checks whether the entries are in use by the first kernel. If so, reserve those entries by setting the corresponding bit in tbl->it_map such that these entries will not be available for the kdump boot. However it could be possible that all TCE entries might be used up due to the driver bug that does continuous mapping. My observation is around 1700 TCE entries are used on some systems (Ex: P4) at some point of time during kdump boot and saving dump (either write into the disk or sending to remote machine). Hence, this patch will make sure that minimum of 2048 entries will be available such that kdump boot could be successful in some cases. Signed-off-by: Haren Myneni <haren@us.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds2006-06-221-0/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (139 commits) [POWERPC] re-enable OProfile for iSeries, using timer interrupt [POWERPC] support ibm,extended-*-frequency properties [POWERPC] Extra sanity check in EEH code [POWERPC] Dont look for class-code in pci children [POWERPC] Fix mdelay badness on shared processor partitions [POWERPC] disable floating point exceptions for init [POWERPC] Unify ppc syscall tables [POWERPC] mpic: add support for serial mode interrupts [POWERPC] pseries: Print PCI slot location code on failure [POWERPC] spufs: one more fix for 64k pages [POWERPC] spufs: fail spu_create with invalid flags [POWERPC] spufs: clear class2 interrupt status before wakeup [POWERPC] spufs: fix Makefile for "make clean" [POWERPC] spufs: remove stop_code from struct spu [POWERPC] spufs: fix spu irq affinity setting [POWERPC] spufs: further abstract priv1 register access [POWERPC] spufs: split the Cell BE support into generic and platform dependant parts [POWERPC] spufs: dont try to access SPE channel 1 count [POWERPC] spufs: use kzalloc in create_spu [POWERPC] spufs: fix initial state of wbox file ... Manually resolved conflicts in: drivers/net/phy/Makefile include/asm-powerpc/spu.h
| * [POWERPC] MSI abstractionJake Moilanen2006-06-151-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of trying to make PPC64 MSI fit in a Intel-centric MSI layer, a simple short-term solution is to hook the pci_{en/dis}able_msi() calls and make a machdep call. The rest of the MSI functions are superfluous for what is needed at this time. Many of which can have machdep calls added as needed. Ben and Michael Ellerman are looking into rewrite the MSI layer to be more generic. However, in the meantime this works as a interim solution. Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | Don't include linux/config.h from anywhere else in include/David Woodhouse2006-04-261-1/+0
|/ | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* powerpc: Fix define_machine so machine_is() works from modulesPaul Mackerras2006-04-231-1/+5
| | | | | | | | | machine_is() was always returning 0 when used in a module, because we weren't exporting the machine definitions. This was why sound wasn't working on powermacs when CONFIG_SND_POWERMAC=m. Original fix from Ben Herrenschmidt, further fixed by me. Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: Kill _machine and hard-coded platform numbersBenjamin Herrenschmidt2006-03-281-4/+22
| | | | | | | | | | | | | | | | This removes statically assigned platform numbers and reworks the powerpc platform probe code to use a better mechanism. With this, board support files can simply declare a new machine type with a macro, and implement a probe() function that uses the flattened device-tree to detect if they apply for a given machine. We now have a machine_is() macro that replaces the comparisons of _machine with the various PLATFORM_* constants. This commit also changes various drivers to use the new macro instead of looking at _machine. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* powerpc: Fix event-scan code for 32-bit CHRPPaul Mackerras2006-03-271-4/+0
| | | | | | | | | | | | | | | On CHRP machines we are supposed to call into firmware (RTAS) periodically, to give it a chance to check for errors and other events. Under ppc we had some special code in timer_interrupt to do this, but that didn't get transferred over to arch/powerpc. Instead, we use an array of timer_list structs, one per CPU, and use add_timer_on to make sure each one gets called on the appropriate CPU. With this we can remove the heartbeat_* elements of the ppc_md struct. Signed-off-by: Paul Mackerras <paulus@samba.org>
* powerpc: Unify the 32 and 64 bit idle loopsPaul Mackerras2006-03-271-5/+8
| | | | | | | | | | This unifies the 32-bit (ARCH=ppc and ARCH=powerpc) and 64-bit idle loops. It brings over the concept of having a ppc_md.power_save function from 32-bit to ARCH=powerpc, which lets us get rid of native_idle(). With this we will also be able to simplify the idle handling for pSeries and cell. Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] cell: enable pause(0) in cpu_idleArnd Bergmann2006-01-091-1/+1
| | | | | | | | | | | | This patch enables support for pause(0) power management state for the Cell Broadband Processor, which is import for power efficient operation. The pervasive infrastructure will in the future enable us to introduce more functionality specific to the Cell's pervasive unit. From: Maximino Aguilar <maguilar@us.ibm.com> Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: Propagate regs through to machine_crash_shutdownMichael Ellerman2006-01-091-1/+1
| | | | | | | | Currently machine_crash_shutdown() gets a struct pt_regs, but doesn't pass it through to the ppc_md function, it should. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: Merge kexecMichael Ellerman2006-01-091-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch merges, to some extent, the PPC32 and PPC64 kexec implementations. We adopt the PPC32 approach of having ppc_md callbacks for the kexec functions. The current PPC64 implementation becomes the "default" implementation for PPC64 which platforms can select if they need no special treatment. I've added these default callbacks to pseries/maple/cell/powermac, this means iSeries no longer supports kexec - but it never worked anyway. I've renamed PPC32's machine_kexec_simple to default_machine_kexec, inline with PPC64. Judging by the comments it might be better named machine_kexec_non_of, or something, but at the moment it's the only implementation for PPC32 so it's the "default". Kexec requires machine_shutdown(), which is in machine_kexec.c on PPC32, but we already have in setup-common.c on powerpc. All this does is call ppc_md.nvram_sync, which only powermac implements, so instead make machine_shutdown a ppc_md member and have it call core99_nvram_sync directly on powermac. I've also stuck relocate_kernel.S into misc_32.S for powerpc. Built for ARCH=ppc, and 32 & 64 bit ARCH=powerpc, with KEXEC=y/n. Booted on P5 LPAR and successfully kexec'ed. Should apply on top of 493f25ef4087395891c99fcfe2c72e62e293e89f. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: Turn cpu_irq_down into kexec_cpu_downMichael Ellerman2005-11-141-1/+3
| | | | | | | | | | | | | | | | | | | We currently have a ppc_md member called cpu_irq_down, which disables IRQs for the cpu in question. The only caller of cpu_irq_down is the kexec code. On pSeries we need to do more than just teardown IRQs at kexec time, so rename the ppc_md member to kexec_cpu_down and expand it. The pSeries code needs to know, and other platforms might too, whether we're doing a crash shutdown (ie. panicking) or a regular kexec, so add a flag for that. The pSeries implementation of kexec_cpu_down does an unregister VPA call, which tells the Hypervisor to stop writing stuff into our pacas. Without this we can get weird memory corruption bugs when we kexec, caused by the Hypervisor writing into the first kernel's pacas which happens to be somewhere interesting in the second kernel's memory. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* Merge ../linux-2.6Paul Mackerras2005-11-071-4/+6
|\
| * [PATCH] ppc64: support 64k pagesBenjamin Herrenschmidt2005-11-061-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] powerpc: Make ppc_md.set_dabr non 64-bit specificMichael Ellerman2005-11-071-1/+3
|/ | | | | | | | | | Define ppc_md.set_dabr for both 32 + 64 bit. Cleanup the implementation for pSeries also, it was needlessly complex. Now we just do two firmware tests at setup time, and use one of two functions, rather than using one function and testing on every call. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* powerpc: Make set_dabr() a ppc_md functionMichael Ellerman2005-11-031-0/+1
| | | | | | | Move pSeries specific code in set_dabr() into a ppc_md function, this will allow us to keep plpar_wrappers.h private to platforms/pseries. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
* [PATCH] ppc: make phys_mem_access_prot() work with pfns instead of addressesRoland Dreier2005-10-291-1/+1
| | | | | | | | | | | | | | | | | | Change the phys_mem_access_prot() function to take a pfn instead of an address. This allows mmap64() to work on /dev/mem for addresses above 4G on 32-bit architectures. We start with a pfn in mmap_mem(), so there's no need to convert to an address; in fact, it's actively bad, since the conversion can overflow when the address is above 4G. Similarly fix the ppc32 page_is_ram() function to avoid a conversion to an address by directly comparing to max_pfn. Working with max_pfn instead of high_memory fixes page_is_ram() to give the right answer for highmem pages. Signed-off-by: Roland Dreier <rolandd@cisco.com> Cc: Anton Blanchard <anton@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* power: Update the multiple inclusion protection symbol on machdep.hPaul Mackerras2005-10-261-3/+3
| | | | Signed-off-by: Paul Mackerras <paulus@samba.org>
* powerpc: Merge in 64-bit powermac support.Paul Mackerras2005-10-221-4/+2
| | | | | | | | | | This brings in a lot of changes from arch/ppc64/kernel/pmac_*.c to arch/powerpc/platforms/powermac/*.c and makes various minor tweaks elsewhere. On the powermac we now initialize ppc_md by copying the whole pmac_md structure into it, which required some changes in the ordering of initializations of individual fields of it. Signed-off-by: Paul Mackerras <paulus@samba.org>
* ppc64: Change ppc_md.get_cpuinfo to ppc_md.show_cpuinfoPaul Mackerras2005-10-201-5/+2
| | | | | | | ... for consistency with ppc32; also add in ppc32's show_percpuinfo function. Signed-off-by: Paul Mackerras <paulus@samba.org>
* powerpc: Merge machdep.hPaul Mackerras2005-10-191-0/+289
A few things change for consistency between ppc32 and ppc64: idle functions return void; *_get_boot_time functions return unsigned long (i.e. time_t) rather than filling in a struct rtc_time (since that's useful to the callers and easier for pmac to generate); *_get_rtc_time and *_set_rtc_time functions take a struct rtc_time; irq_canonicalize is gone; nvram_sync returns void. Signed-off-by: Paul Mackerras <paulus@samba.org>
OpenPOWER on IntegriCloud