summaryrefslogtreecommitdiffstats
path: root/include/asm-mips/mach-au1x00
Commit message (Collapse)AuthorAgeFilesLines
* [MIPS] Alchemy: Fix PCI-memory accessAlexander Bigga2007-02-061-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | The problem was introduced in 2.6.18.3 with the casting of some 36bit-defines (PCI memory) in au1000.h to resource_size_t which may be u32 or u64 depending on the experimental CONFIG_RESOURCES_64BIT. With unset CONFIG_RESOURCES_64BIT, the pci-memory cannot be accessed because the ioremap in arch/mips/au1000/common/pci.c already used the truncated addresses. With set CONFIG_RESOURCES_64BIT, things get even worse, because PCI-scan aborts, due to resource conflict: request_resource() in arch/mips/pci/pci.c fails because the maximum iomem-address is 0xffffffff (32bit) but the pci-memory-start-address is 0x440000000 (36bit). To get pci working again, I propose the following patch: 1. remove the resource_size_t-casting from au1000.h again 2. make the casting in arch/mips/au1000/common/pci.c (it's allowed and necessary here. The 36bit-handling will be done in __fixup_bigphys_addr). With this patch pci works again like in 2.6.18.2, the gcc-compile warnings in pci.c are gone and it doesn't depend on CONFIG_EXPERIMENTAL. Signed-off-by: Alexander Bigga <ab@mycable.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Alchemy: Fix bunch of warningsRalf Baechle2007-02-061-6/+7
| | | | | | | | | | | | CC arch/mips/au1000/common/pci.o arch/mips/au1000/common/pci.c:42: warning: large integer implicitly truncated to unsigned type arch/mips/au1000/common/pci.c:43: warning: large integer implicitly truncated to unsigned type arch/mips/au1000/common/pci.c:49: warning: large integer implicitly truncated to unsigned type arch/mips/au1000/common/pci.c:50: warning: large integer implicitly truncated to unsigned type arch/mips/au1000/common/pci.c: In function ‘au1x_pci_setup’: arch/mips/au1000/common/pci.c:82: warning: ISO C90 forbids mixed declarations and code Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [PATCH] make au1xxx-ide compile againManuel Lauss2006-11-221-4/+2
| | | | | | | | | | | | | The Au1xx IDE controller driver doesn't compile: CC drivers/ide/mips/au1xxx-ide.o /linux-2.6.19-rc6-work/drivers/ide/mips/au1xxx-ide.c:480: error: conflicting types for 'auide_ddma_tx_callback' include2/asm/mach-au1x00/au1xxx_ide.h:174: error: previous declaration of 'auide_ddma_tx_callback' was here /linux-2.6.19-rc6-work/drivers/ide/mips/au1xxx-ide.c:486: error: conflicting types for 'auide_ddma_rx_callback' include2/asm/mach-au1x00/au1xxx_ide.h:176: error: previous declaration of 'auide_ddma_rx_callback' was here Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Alchemy: nuke usbdev; it's useless as is ...Ralf Baechle2006-10-091-73/+0
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* IRQ: Use the new typedef for interrupt handler function pointersDavid Howells2006-10-091-1/+1
| | | | | | | | | | | | | | | | Use the new typedef for interrupt handler function pointers rather than actually spelling out the full thing each time. This was scripted with the following small shell script: #!/bin/sh egrep -nHrl -e 'irqreturn_t[ ]*[(][*]' $* | while read i do echo $i perl -pi -e 's/irqreturn_t\s*[(]\s*[*]\s*([_a-zA-Z0-9]*)\s*[)]\s*[(]\s*int\s*,\s*void\s*[*]\s*[)]/irq_handler_t \1/g' $i || exit $? done Signed-Off-By: David Howells <dhowells@redhat.com>
* [MIPS] Complete fixes after removal of pt_regs argument to int handlers.Ralf Baechle2006-10-081-2/+1
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [PATCH] Alchemy: Delete unused pt_regs * argument from au1xxx_dbdma_chan_allocRalf Baechle2006-09-261-3/+3
| | | | | | | | | | | | The third argument of au1xxx_dbdma_chan_alloc's callback function is not used anywhere. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [MIPS] au1xxx: fix PSC_SMBTXRX_RSR.Domen Puncer2006-06-291-1/+1
| | | | | Signed-off-by: Domen Puncer <domen.puncer@ultra.si> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [PATCH] Au1550/1200: add missing PSC #define's, make OSS driver use the ↵Sergei Shtylyov2006-06-231-1/+8
| | | | | | | | | | | | | proper ones Add missing PSC #define's required for the drivers using PSC on DBAu1550 board (also fixing Au1550 PSC3 address) and all Au1200-based boards as well. Make the OSS driver use the correct PSC definitions fo each board. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Don't include linux/config.h from anywhere else in include/David Woodhouse2006-04-266-6/+0
| | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MIPS] Au1200: Make KGDB compileSergei Shtylylov2006-02-071-0/+4
| | | | | | | | AMD Au1200 SOC just doesn't have UART3, so KGDB won't even compile for it as is, here's the fix to make KGDB use UART1. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Au1550: Fix OHCI memory map sizeSergei Shtylyov2006-01-101-2/+5
| | | | | | | | | | USB OpenHCI host controller on Au1550 only decodes memory addresses from 0x14020000 to 0x1407FFFF according to the databook, which gives 0x60000 (on the prior Au1x00 chips the map size was 1MB). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [PATCH] ide: AU1200 IDE updateJordan Crouse2005-12-151-9/+8
| | | | | | | | | Changes here include removing all of CONFIG_PM while it is being repeatedly smacked with a lead pipe, moving the BURSTMODE param to a #define (it should be defined almost always anyway), fixing the rqsize stuff, pulling ide_ioreg_t, and general cleanups and whatnot. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* [PATCH] ide: core modifications for AU1200Jordan Crouse2005-12-151-5/+0
| | | | | | bart: slightly modified by me Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* More configcheck fixes.Ralf Baechle2005-10-291-0/+2
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Kernel gpio/2 routines that will be used by some drivers.Pete Popov2005-10-291-0/+20
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Cleaned up AMD Au1200 IDE driver:Pete Popov2005-10-293-0/+349
| | | | | | | | | | | | | - converted to platform bus - removed pci dependencies - removed virt_to_phys/phys_to_virt calls System now can root off of a disk. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README new file mode 100644
* Fix the fixup_bigphys_addr compile problem.Pete Popov2005-10-291-1/+3
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Removed __ilog2 since it's no longer needed and conflicts with thePete Popov2005-10-291-23/+0
| | | | | | generic one. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Inline ioremap() calls for constant addresses that map to KSEG1.Maciej W. Rozycki2005-10-291-0/+30
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* * use 'unsigned long' as address supplied to au_write[bwl]()Pete Popov2005-10-291-95/+32
| | | | | | | * remove two already unused and commented structures * added an ULL suffix to several address constants that use bits 35-32 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Au1100 FB driver uplift for 2.6.Pete Popov2005-10-291-0/+7
| | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Antonino Daplas <adaplas@pol.net>
* Moved irq_tab_alchemy to the board specific irqmap.c files.Pete Popov2005-10-291-0/+13
| | | | | | Cleaned up a to of warnings in dbdma.c. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Base Au1200 2.6 support.Pete Popov2005-10-292-76/+604
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [PATCH] mips: nuke trailing whitespaceRalf Baechle2005-09-051-1/+1
| | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-168-0/+3022
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
OpenPOWER on IntegriCloud