summaryrefslogtreecommitdiffstats
path: root/fs
Commit message (Collapse)AuthorAgeFilesLines
* NLM: Remove the signal masking in nlmclnt_proc/nlmclnt_cancelTrond Myklebust2008-04-191-41/+1
| | | | | | The signal masks have been rendered obsolete by the preceding patch. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* NLM/lockd: convert __nlm_async_call to use rpc_run_task()Trond Myklebust2008-04-191-10/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Peter Staubach comments: > In the course of investigating testing failures in the locking phase of > the Connectathon testsuite, I discovered a couple of things. One was > that one of the tests in the locking tests was racy when it didn't seem > to need to be and two, that the NFS client asynchronously releases locks > when a process is exiting. ... > The Single UNIX Specification Version 3 specifies that: "All locks > associated with a file for a given process shall be removed when a file > descriptor for that file is closed by that process or the process holding > that file descriptor terminates.". > > This does not specify whether those locks must be released prior to the > completion of the exit processing for the process or not. However, > general assumptions seem to be that those locks will be released. This > leads to more deterministic behavior under normal circumstances. The following patch converts the NFSv2/v3 locking code to use the same mechanism as NFSv4 for sending asynchronous RPC calls and then waiting for them to complete. This ensures that the UNLOCK and CANCEL RPC calls will complete even if the user interrupts the call, yet satisfies the above request for synchronous behaviour on process exit. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* NLM/lockd: Add a reference counter to struct nlm_rqstTrond Myklebust2008-04-191-0/+3
| | | | | | | | When we replace the existing synchronous RPC calls with asynchronous calls, the reference count will be needed in order to allow us to examine the result of the RPC call. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* NFSv4: Ensure we don't corrupt fl->fl_flags in nfs4_proc_unlckTrond Myklebust2008-04-191-0/+2
| | | | Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* NLM/lockd: Ensure we don't corrupt fl->fl_flags in nlmclnt_unlock()Trond Myklebust2008-04-191-6/+10
| | | | | | | Also fix up nlmclnt_lock() so that it doesn't pass modified versions of fl->fl_flags to nlmclnt_cancel() and other helpers. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* NFSv4: Only increment the sequence id if the server saw itTrond Myklebust2008-04-192-7/+23
| | | | | | | | | | | | It is quite possible that the OPEN, CLOSE, LOCK, LOCKU,... compounds fail before the actual stateful operation has been executed (for instance in the PUTFH call). There is no way to tell from the overall status result which operations were executed from the COMPOUND. The fix is to move incrementing of the sequence id into the XDR layer, so that we do it as we process the results from the stateful operation. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* NFSv4: Remove bogus call to nfs4_drop_state_owner() in _nfs4_open_expired()Trond Myklebust2008-04-191-4/+1
| | | | | | | | | There should be no need to invalidate a perfectly good state owner just because of a stale filehandle. Doing so can cause the state recovery code to break, since nfs4_get_renew_cred() and nfs4_get_setclientid_cred() rely on finding active state owners. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* NFS: Ensure that rpc_run_task() errors are propagated back to the callerTrond Myklebust2008-04-193-26/+40
| | | | Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* NFS: Ensure that the write code cleans up properly when rpc_run_task() failsTrond Myklebust2008-04-192-46/+71
| | | | Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* NFS: Ensure that the read code cleans up properly when rpc_run_task() failsTrond Myklebust2008-04-192-26/+46
| | | | | | | | | In the case of readpage() we need to ensure that the pages get unlocked, and that the error is flagged. In the case of O_DIRECT, we need to ensure that the pages are all released. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* NFS: Fix nfs_wb_page() to always exit with an error or a clean pageTrond Myklebust2008-04-191-11/+12
| | | | | | | | | | | | | | | | | | | It is possible for nfs_wb_page() to sometimes exit with 0 return value, yet the page is left in a dirty state. For instance in the case where the server rebooted, and the COMMIT request failed, then all the previously "clean" pages which were cached by the server, but were not guaranteed to have been writted out to disk, have to be redirtied and resent to the server. The fix is to have nfs_wb_page_priority() check that the page is clean before it exits... This fixes a condition that triggers the BUG_ON(PagePrivate(page)) in nfs_create_request() when we're in the nfs_readpage() path. Also eliminate a redundant BUG_ON(!PageLocked(page)) while we're at it. It turns out that clear_page_dirty_for_io() has the exact same test. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* lockd: introduce new function to encode private argument in SM_MON requestsChuck Lever2008-03-191-6/+24
| | | | | | | | Clean up: refactor the encoding of the opaque 16-byte private argument in xdr_encode_mon(). This will be updated later to support IPv6 addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* lockd: Fix up incorrect RPC buffer size calculations.Chuck Lever2008-03-191-31/+8
| | | | | | | | | | | Switch to using the new mon_id encoder function. Now that we've refactored the encoding of SM_MON requests, we've discovered that the pre-computed buffer length maximums are incorrect! Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* lockd: document use of mon_id argument in SM_MON requestsChuck Lever2008-03-191-0/+13
| | | | | | | | | Clean up: document the argument type that xdr_encode_common() is marshalling by introducing a new function. The new function will replace xdr_encode_common() in just a sec. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* lockd: refactor SM_MON my_id argument encoderChuck Lever2008-03-191-0/+19
| | | | | | | | Clean up: introduce a new XDR encoder specifically for the my_id argument of SM_MON requests. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* lockd: refactor SM_MON mon_name argument encoderChuck Lever2008-03-191-0/+25
| | | | | | | | | Clean up: introduce a new XDR encoder specifically for the mon_name argument of SM_MON requests. This will be updated later to support IPv6 addresses in addition to IPv4 addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* lockd: Ensure NSM strings aren't longer than protocol allowsChuck Lever2008-03-191-0/+9
| | | | | | | | Introduce a special helper function to check the length of NSM strings before they are placed on the wire. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* NLM: NLM protocol version numbers are u32Chuck Lever2008-03-191-9/+11
| | | | | | | | | | Clean up: RPC protocol version numbers are u32. Make sure we use an appropriate type for NLM version numbers when calling nlm_lookup_host(). Eliminates a harmless mixed sign comparison in nlm_host_lookup(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* NLM: LOCKD fails to load if CONFIG_SYSCTL is not setChuck Lever2008-03-191-0/+12
| | | | | | | | | | | | | | | | | | | | | Bruce Fields says: "By the way, we've got another config-related nit here: http://bugzilla.linux-nfs.org/show_bug.cgi?id=156 You can build lockd without CONFIG_SYSCTL set, but then the module will fail to load." For now, disable the sysctl registration calls in lockd if CONFIG_SYSCTL is not enabled. This allows the kernel to build properly if PROC_FS or SYSCTL is not enabled, but an NFS client is desired. In the long run, we would like to be able to build the kernel with an NFS client but without lockd. This makes sense, for example, if you want an NFSv4-only NFS client, as NFSv4 doesn't use NLM at all. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* SUNRPC: Add a default setting for CONFIG_SUNRPC_BIND34Chuck Lever2008-03-191-0/+1
| | | | | | | | | Most distros will want support for rpcbind protocols 3 and 4 to default off until they have integrated user-space support for the new rpcbind daemon which supports IPv6 RPC services. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* SUNRPC: Update help Kconfig textChuck Lever2008-03-191-13/+32
| | | | | | | | | Clean up: refresh the help text for Kconfig items related to the sunrpc module. Remove obsolete URLs, and make the language consistent among the options. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* NFS: Always enable NFS direct I/OChuck Lever2008-03-194-37/+1
| | | | | | | | | Since O_DIRECT is a standard feature that is enabled in most distros, eliminate the CONFIG_NFS_DIRECTIO build option, and change the fs/nfs/Makefile to always build in the NFS direct I/O engine. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* NFS: Show most mount options via nfs_show_options()Chuck Lever2008-03-191-2/+65
| | | | | | | | | Display all mount options in /proc/mount which may be needed to reconstruct a previous mount. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* NFS: Save the values of the "mount*=" mount optionsChuck Lever2008-03-191-0/+10
| | | | | | | | | | | | | Save the value of the mountproto= mountport= mountvers= and mountaddr= options so that these values can be displayed later via nfs_show_options(). This preserves the intent of the original mount options, should the file system need to be remounted based on what's displayed in /proc/mounts. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* NFS: Save the value of the "port=" mount optionChuck Lever2008-03-193-31/+11
| | | | | | | | | | | | | | | | | | | | | | | During a remount based on the mount options displayed in /proc/mounts, we want to preserve the original behavior of the mount request. Let's save the original setting of the "port=" mount option in the mount's nfs_server structure. This allows us to simplify the default behavior of port setting for NFSv4 mounts: by default, NFSv2/3 mounts first try an RPC bind to determine the NFS server's port, unless the user specified the "port=" mount option; Users can force the client to skip the RPC bind by explicitly specifying "port=<value>". NFSv4, by contrast, assumes the NFS server port is 2049 and skips the RPC bind, unless the user specifies "port=". Users can force an RPC bind for NFSv4 by explicitly specifying "port=0". I added a couple of extra comments to clarify this behavior. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* NFS: Fix up data types of fields in nfs_parsed_mount_optionsChuck Lever2008-03-191-3/+3
| | | | | | | | Clean up: make data types of fields in nfs_parsed_mount_options more consistent with other uses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* NFS: numeric mount parameters are unsignedChuck Lever2008-03-191-13/+13
| | | | | | | | | | Clean up: use %u instead of %d when displaying NFS mount options. Nit: Fix reporting of "namlen=" option in nfs_show_mount_stats. The mount option is called "namlen" without the "e". Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* NFS: clean up short packet handling for NFSv4 readdirJeff Layton2008-03-191-10/+27
| | | | | | | | | | | | | | | | | | | | Currently, the NFS readdir decoders have a workaround for buggy servers that send an empty readdir response with the EOF bit unset. If the server sends a malformed response in some cases, this workaround kicks in and just returns an empty response rather than returning a proper error to the caller. This patch does 3 things: 1) have malformed responses with no entries return error (-EIO) 2) preserve existing workaround for servers that send empty responses with the EOF marker unset. 3) Add some comments to clarify the logic in decode_readdir(). Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* NFS: clean up short packet handling for NFSv3 readdirJeff Layton2008-03-191-9/+28
| | | | | | | | | | | | | | | | | | | | Currently, the NFS readdir decoders have a workaround for buggy servers that send an empty readdir response with the EOF bit unset. If the server sends a malformed response in some cases, this workaround kicks in and just returns an empty response rather than returning a proper error to the caller. This patch does 3 things: 1) have malformed responses with no entries return error (-EIO) 2) preserve existing workaround for servers that send empty responses with the EOF marker unset. 3) Add some comments to clarify the logic in nfs3_xdr_readdirres(). Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* NFS: clean up short packet handling for NFSv2 readdirJeff Layton2008-03-191-9/+28
| | | | | | | | | | | | | | | | | | | | Currently, the NFS readdir decoders have a workaround for buggy servers that send an empty readdir response with the EOF bit unset. If the server sends a malformed response in some cases, this workaround kicks in and just returns an empty response rather than returning a proper error to the caller. This patch does 3 things: 1) have malformed responses with no entries return error (-EIO) 2) preserve existing workaround for servers that send empty responses with the EOF marker unset. 3) Add some comments to clarify the logic in nfs_xdr_readdirres(). Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* nfs: remove duplicate initializations of nfs_read_data fieldFred Isaman2008-03-191-2/+0
| | | | | Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* nfs: nfs_redirty_requestFred2008-03-191-9/+14
| | | | | | | | Both flush functions have the same error handling routine. Pull it out as a function. Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* Merge branch 'hotfixes' into develTrond Myklebust2008-03-1919-118/+332
|\
| * nfs: don't ignore return value from nfs_pageio_add_requestFred Isaman2008-03-192-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ignoring the return value from nfs_pageio_add_request can cause deadlocks. In read path: call nfs_pageio_add_request from readpage_async_filler assume at this point that there are requests already in desc, that can't be merged with the current request. so nfs_pageio_doio is fired up to clear out desc. assume something goes wrong in setting up the io, so desc->pg_error is set. This causes nfs_pageio_add_request to return 0, *WITHOUT* adding the original request. BUT, since return code is ignored, readpage_async_filler assumes it has been added, and does nothing further, leaving page locked. do_generic_mapping_read will eventually call lock_page, resulting in deadlock In write path: page is marked dirty by generic_perform_write nfs_writepages is called call nfs_pageio_add_request from nfs_page_async_flush assume at this point that there are requests already in desc, that can't be merged with the current request. so nfs_pageio_doio is fired up to clear out desc. assume something goes wrong in setting up the io, so desc->pg_error is set. This causes nfs_page_async_flush to return 0, *WITHOUT* adding the original request, yet marking the request as locked (PG_BUSY) and in writeback, clearing dirty marks. The next time a write is done to the page, deadlock will result as nfs_write_end calls nfs_update_request Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
| * Merge branch 'audit.b49' of ↵Linus Torvalds2008-03-181-0/+22
| |\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current * 'audit.b49' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: [PATCH] export sessionid alongside the loginuid in procfs
| | * [PATCH] export sessionid alongside the loginuid in procfsEric Paris2008-03-181-0/+22
| | | | | | | | | | | | | | | Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2008-03-181-0/+2
| |\ \ | | |/ | |/| | | | | | | | | | | | | * 'for-linus' of git://git.kernel.dk/linux-2.6-block: Revert "unexport bio_{,un}map_user" relay: fix subbuf_splice_actor() adding too many pages The ps2esdi driver was marked as BROKEN more than two years ago due to being
| | * Revert "unexport bio_{,un}map_user"Jens Axboe2008-03-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Outside users like asmlib uses the mapping functions. API wise, the export is definitely sane. It's a better idea to keep this export than to require external users to open-code this piece of code instead. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| * | hfs_bnode_find() can fail, resulting in hfs_bnode_split() breakageAl Viro2008-03-171-3/+15
| |/ | | | | | | | | | | | | oops and fs corruption; the latter can happen even on valid fs in case of oom. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * nfsd: fix oops on access from high-numbered portsJ. Bruce Fields2008-03-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This bug was always here, but before my commit 6fa02839bf9412e18e77 ("recheck for secure ports in fh_verify"), it could only be triggered by failure of a kmalloc(). After that commit it could be triggered by a client making a request from a non-reserved port for access to an export marked "secure". (Exports are "secure" by default.) The result is a struct svc_export with a reference count one too low, resulting in likely oopses next time the export is accessed. The reference counting here is not straightforward; a later patch will clean up fh_verify(). Thanks to Lukas Hejtmanek for the bug report and followup. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Cc: Lukas Hejtmanek <xhejtman@ics.muni.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * pagemap: proper read error handlingMarcelo Tosatti2008-03-131-5/+13
| | | | | | | | | | | | | | | | | | | | Fix pagemap_read() error handling by releasing acquired resources and checking for get_user_pages() partial failure. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2008-03-124-37/+116
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits) [SCTP]: Fix local_addr deletions during list traversals. net: fix build with CONFIG_NET=n [TCP]: Prevent sending past receiver window with TSO (at last skb) rt2x00: Add new D-Link USB ID rt2x00: never disable multicast because it disables broadcast too libertas: fix the 'compare command with itself' properly drivers/net/Kconfig: fix whitespace for GELIC_WIRELESS entry [NETFILTER]: nf_queue: don't return error when unregistering a non-existant handler [NETFILTER]: nfnetlink_queue: fix EPERM when binding/unbinding and instance 0 exists [NETFILTER]: nfnetlink_log: fix EPERM when binding/unbinding and instance 0 exists [NETFILTER]: nf_conntrack: replace horrible hack with ksize() [NETFILTER]: nf_conntrack: add \n to "expectation table full" message [NETFILTER]: xt_time: fix failure to match on Sundays [NETFILTER]: nfnetlink_log: fix computation of netlink skb size [NETFILTER]: nfnetlink_queue: fix computation of allocated size for netlink skb. [NETFILTER]: nfnetlink: fix ifdef in nfnetlink_compat.h [NET]: include <linux/types.h> into linux/ethtool.h for __u* typedef [NET]: Make /proc/net a symlink on /proc/self/net (v3) RxRPC: fix rxrpc_recvmsg()'s returning of msg_name net/enc28j60: oops fix ...
| | * net: fix build with CONFIG_NET=nAndrew Morton2008-03-111-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | fs/built-in.o:(.rodata+0x1134): undefined reference to `proc_net_inode_operations' fs/built-in.o:(.rodata+0x1138): undefined reference to `proc_net_operations' Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * [NET]: Make /proc/net a symlink on /proc/self/net (v3)Pavel Emelyanov2008-03-074-37/+114
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current /proc/net is done with so called "shadows", but current implementation is broken and has little chances to get fixed. The problem is that dentries subtree of /proc/net directory has fancy revalidation rules to make processes living in different net namespaces see different entries in /proc/net subtree, but currently, tasks see in the /proc/net subdir the contents of any other namespace, depending on who opened the file first. The proposed fix is to turn /proc/net into a symlink, which points to /proc/self/net, which in turn shows what previously was in /proc/net - the network-related info, from the net namespace the appropriate task lives in. # ls -l /proc/net lrwxrwxrwx 1 root root 8 Mar 5 15:17 /proc/net -> self/net In other words - this behaves like /proc/mounts, but unlike "mounts", "net" is not a file, but a directory. Changes from v2: * Fixed discrepancy of /proc/net nlink count and selinux labeling screwup pointed out by Stephen. To get the correct nlink count the ->getattr callback for /proc/net is overridden to read one from the net->proc_net entry. To make selinux still work the net->proc_net entry is initialized properly, i.e. with the "net" name and the proc_net parent. Selinux fixes are Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Changes from v1: * Fixed a task_struct leak in get_proc_task_net, pointed out by Paul. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ocfs2: Fix NULL pointer dereferences in o2netTao Ma2008-03-101-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In some situations, ocfs2_set_nn_state might get called with sc = NULL and valid = 0. If sc = NULL, we can't dereference it to get the o2nm_node member. Instead, do what o2net_initialize_handshake does and use NULL when calling o2net_reconnect_delay and o2net_idle_timeout. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
| * | ocfs2/dlm: dlm_thread should not sleep while holding the dlm_spinlockSunil Mushran2008-03-101-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch addresses the bug in which the dlm_thread could go to sleep while holding the dlm_spinlock. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
| * | ocfs2/dlm: Print message showing the recovery masterSunil Mushran2008-03-101-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Knowing the dlm recovery master helps in debugging recovery issues. This patch prints a message on the recovery master node. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
| * | ocfs2/dlm: Add missing dlm_lockres_put()sSunil Mushran2008-03-101-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | dlm_master_request_handler() forgot to put a lockres when dlm_assert_master_worker() failed or was skipped. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
| * | ocfs2/dlm: Add missing dlm_lockres_put()s in migration pathSunil Mushran2008-03-102-6/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During migration, the recovery master node may be asked to master a lockres it may not know about. In that case, it would not only have to create a lockres and add it to the hash, but also remember to to do the _put_ corresponding to the kref_init in dlm_init_lockres(), as soon as the migration is completed. Yes, we don't wait for the dlm_purge_lockres() to do that matching put. Note the ref added for it being in the hash protects the lockres from being freed prematurely. This patch adds that missing put, as described above, to plug a memleak. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
| * | ocfs2/dlm: Add missing dlm_lock_put()sSunil Mushran2008-03-102-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Normally locks for remote nodes are freed when that node sends an UNLOCK message to the master. The master node tags an DLM_UNLOCK_FREE_LOCK action to do an extra put on the lock at the end. However, there are times when the master node has to free the locks for the remote nodes forcibly. Two cases when this happens are: 1. When the master has migrated the lockres plus all locks to another node. 2. When the master is clearing all the locks of a dead node. It was in the above two conditions that the dlm was missing the extra put. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
OpenPOWER on IntegriCloud