summaryrefslogtreecommitdiffstats
path: root/fs/xfs/xfs_mount.c
Commit message (Collapse)AuthorAgeFilesLines
* xfs: fully support v5 format filesystemsDave Chinner2014-05-051-2/+0
| | | | | | | | | | | | | | | | | | We have had this code in the kernel for over a year now and have shaken all the known issues out of the code over the past few releases. It's now time to remove the experimental warnings during mount and fully support the new filesystem format in production systems. Remove the experimental warning, and add a version number to the initial "mounting filesystem" message to tell use what type of filesystem is being mounted. Also, remove the temporary inode cluster size output at mount time now we know that this code works fine. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
* Merge branch 'xfs-bug-fixes-for-3.15-2' into for-nextDave Chinner2014-03-131-0/+3
|\
| * xfs: don't leak EFSBADCRC to userspaceDave Chinner2014-03-071-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | While the verifier routines may return EFSBADCRC when a buffer has a bad CRC, we need to translate that to EFSCORRUPTED so that the higher layers treat the error appropriately and we return a consistent error to userspace. This fixes a xfs/005 regression. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
* | xfs: skip verification on initial "guess" superblock readEric Sandeen2014-02-191-8/+16
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When xfs_readsb() does the very first read of the superblock, it makes a guess at the length of the buffer, based on the sector size of the underlying storage. This may or may not match the filesystem sector size in sb_sectsize, so we can't i.e. do a CRC check on it; it might be too short. In fact, mounting a filesystem with sb_sectsize larger than the device sector size will cause a mount failure if CRCs are enabled, because we are checksumming a length which exceeds the buffer passed to it. So always read twice; the first time we read with NULL buffer ops to skip verification; then set the proper read length, hook up the proper verifier, and give it another go. Once we are sure that we've got the right buffer length, we can also use bp->b_length in the xfs_sb_read_verify, rather than the less-trusted on-disk sectorsize for secondary superblocks. Before this we ran the risk of passing junk to the crc32c routines, which didn't always handle extreme values. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
* xfs: increase inode cluster size for v5 filesystemsDave Chinner2013-11-181-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | v5 filesystems use 512 byte inodes as a minimum, so read inodes in clusters that are effectively half the size of a v4 filesystem with 256 byte inodes. For v5 fielsystems, scale the inode cluster size with the size of the inode so that we keep a constant 32 inodes per cluster ratio for all inode IO. This only works if mkfs.xfs sets the inode alignment appropriately for larger inode clusters, so this functionality is made conditional on mkfs doing the right thing. xfs_repair needs to know about the inode alignment changes, too. Wall time: create bulkstat find+stat ls -R unlink v4 237s 161s 173s 201s 299s v5 235s 163s 205s 31s 356s patched 234s 160s 182s 29s 317s System time: create bulkstat find+stat ls -R unlink v4 2601s 2490s 1653s 1656s 2960s v5 2637s 2497s 1681s 20s 3216s patched 2613s 2451s 1658s 20s 3007s So, wall time same or down across the board, system time same or down across the board, and cache hit rates all improve except for the ls -R case which is a pure cold cache directory read workload on v5 filesystems... So, this patch removes most of the performance and CPU usage differential between v4 and v5 filesystems on traversal related workloads. Note: while this patch is currently for v5 filesystems only, there is no reason it can't be ported back to v4 filesystems. This hasn't been done here because bringing the code back to v4 requires forwards and backwards kernel compatibility testing. i.e. to deterine if older kernels(*) do the right thing with larger inode alignments but still only using 8k inode cluster sizes. None of this testing and validation on v4 filesystems has been done, so for the moment larger inode clusters is limited to v5 superblocks. (*) a current default config v4 filesystem should mount just fine on 2.6.23 (when lazy-count support was introduced), and so if we change the alignment emitted by mkfs without a feature bit then we have to make sure it works properly on all kernels since 2.6.23. And if we allow it to be changed when the lazy-count bit is not set, then it's all kernels since v2 logs were introduced that need to be tested for compatibility... Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: decouple inode and bmap btree header filesDave Chinner2013-10-231-11/+4
| | | | | | | | | | | | | | | | | | | | Currently the xfs_inode.h header has a dependency on the definition of the BMAP btree records as the inode fork includes an array of xfs_bmbt_rec_host_t objects in it's definition. Move all the btree format definitions from xfs_btree.h, xfs_bmap_btree.h, xfs_alloc_btree.h and xfs_ialloc_btree.h to xfs_format.h to continue the process of centralising the on-disk format definitions. With this done, the xfs inode definitions are no longer dependent on btree header files. The enables a massive culling of unnecessary includes, with close to 200 #include directives removed from the XFS kernel code base. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: decouple log and transaction headersDave Chinner2013-10-231-4/+6
| | | | | | | | | | | | | | | | | | | | | xfs_trans.h has a dependency on xfs_log.h for a couple of structures. Most code that does transactions doesn't need to know anything about the log, but this dependency means that they have to include xfs_log.h. Decouple the xfs_trans.h and xfs_log.h header files and clean up the includes to be in dependency order. In doing this, remove the direct include of xfs_trans_reserve.h from xfs_trans.h so that we remove the dependency between xfs_trans.h and xfs_mount.h. Hence the xfs_trans.h include can be moved to the indicate the actual dependencies other header files have on it. Note that these are kernel only header files, so this does not translate to any userspace changes at all. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: unify directory/attribute format definitionsDave Chinner2013-10-231-2/+1
| | | | | | | | | | | | | | The on-disk format definitions for the directory and attribute structures are spread across 3 header files right now, only one of which is dedicated to defining on-disk structures and their manipulation (xfs_dir2_format.h). Pull all the format definitions into a single header file - xfs_da_format.h - and switch all the code over to point at that. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: create a shared header file for format-related informationDave Chinner2013-10-231-0/+1
| | | | | | | | | | | | | | | | | | | All of the buffer operations structures are needed to be exported for xfs_db, so move them all to a common location rather than spreading them all over the place. They are verifying the on-disk format, so while xfs_format.h might be a good place, it is not part of the on disk format. Hence we need to create a new header file that we centralise these related definitions. Start by moving the bffer operations structures, and then also move all the other definitions that have crept into xfs_log_format.h and xfs_format.h as there was no other shared header file to put them in. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: Register hotcpu notifier after initializationRichard Weinberger2013-08-221-6/+7
| | | | | | | | | | | | Currently the code initializizes mp->m_icsb_mutex and other things _after_ register_hotcpu_notifier(). As the notifier takes mp->m_icsb_mutex it can happen that it takes the lock before it's initialization. Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: fix the comment of xfs_mountfs()Zhi Yong Wu2013-08-201-1/+1
| | | | | | | Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: fix the comment of xfs_mod_incore_sb_unlocked()Zhi Yong Wu2013-08-201-1/+1
| | | | | | | Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: fix the comment of xfs_check_sizes()Zhi Yong Wu2013-08-201-1/+1
| | | | | | | Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: refactor xfs_trans_reserve() interfaceJie Liu2013-08-121-6/+3
| | | | | | | | | | | | | | | | With the new xfs_trans_res structure has been introduced, the log reservation size, log count as well as log flags are pre-initialized at mount time. So it's time to refine xfs_trans_reserve() interface to be more neat. Also, introduce a new helper M_RES() to return a pointer to the mp->m_resv structure to simplify the input. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: consolidate xfs_utils.cDave Chinner2013-08-121-1/+0
| | | | | | | | | | | There are a few small helper functions in xfs_util, all related to xfs_inode modifications. Move them all to xfs_inode.c so all xfs_inode operations are consiolidated in the one place. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: introduce xfs_sb.c for sharing with libxfsDave Chinner2013-08-121-779/+5
| | | | | | | | | | | | | | | | | | xfs_mount.c is shared with userspace, but the only functions that are shared are to do with physical superblock manipulations. This means that less than 25% of the xfs_mount.c code is actually shared with userspace. Move all the superblock functions to xfs_sb.c and share that instead with libxfs. Note that this will leave all the in-core transaction related superblock counter modifications in xfs_mount.c as none of that is shared with userspace. With a few more small changes, xfs_mount.h won't need to be shared with userspace anymore, either. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: reshuffle dir2 definitions around for userspaceDave Chinner2013-08-121-1/+3
| | | | | | | | | | | | | | Many of the definitions within xfs_dir2_priv.h are needed in userspace outside libxfs. Definitions within xfs_dir2_priv.h are wholly contained within libxfs, so we need to shuffle some of the definitions around to keep consistency across files shared between user and kernel space. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: separate dquot on disk format definitions out of xfs_quota.hDave Chinner2013-08-121-1/+1
| | | | | | | | | | | | | The on disk format definitions of the on-disk dquot, log formats and quota off log formats are all intertwined with other definitions for quotas. Separate them out into their own header file so they can easily be shared with userspace. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: Start using pquotaino from the superblock.Chandra Seetharaman2013-07-221-8/+54
| | | | | | | | | | | | | Start using pquotino and define a macro to check if the superblock has pquotino. Keep backward compatibilty by alowing mount of older superblock with no separate pquota inode. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: Initialize all quota inodes to be NULLFSINOChandra Seetharaman2013-07-221-0/+18
| | | | | | | | | | | | | | | | | | mkfs doesn't initialize the quota inodes to NULLFSINO as it does for the other internal inodes. This leads to two in-core values (0 and NULLFSINO) to be checked against, to make sure if a quota inode is valid. Solve that problem by initializing the in-core values of all quotaino values to NULLFSINO if they are 0 in the disk. Note that these values are not written back to on-disk superblock unless some quota is enabled on the filesystem. Even in that case sb_pquotino is written to disk only if the on-disk superblock supports pquotino Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: Remove incore use of XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKDChandra Seetharaman2013-06-281-0/+51
| | | | | | | | | | | | | | | | Remove all incore use of XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD. Instead, start using XFS_GQUOTA_.* XFS_PQUOTA_.* counterparts for GQUOTA and PQUOTA respectively. On-disk copy still uses XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD. Read and write of the superblock does the conversion from *OQUOTA* to *[PG]QUOTA*. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: Remove XFS_MOUNT_RETERRJie Liu2013-06-191-26/+11
| | | | | | | | | | | | | | | | | | | | XFS_MOUNT_RETERR is going to be set at xfs_parseargs() if mp->m_dalign is enabled, so any time we enter "if (mp->m_dalign)" branch in xfs_update_alignment(), XFS_MOUNT_RETERR is set and so we always be emitting a warning and returning an error. Hence, we can remove it and get rid of a couple of redundant check up against it at xfs_upate_alignment(). Thanks Dave Chinner for the suggestions of simplify the code in xfs_parseargs(). Signed-off-by: Jie Liu <jeff.liu@oracle.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: Don't keep silent if sunit/swidth can not be changed via mountJie Liu2013-06-171-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As per the mount man page, sunit and swidth can be changed via mount options. For XFS, on the face of it, those options seems works if the specified alignments is properly, e.g. # mount -o sunit=4096,swidth=8192 /dev/sdb1 /mnt # mount | grep sdb1 /dev/sdb1 on /mnt type xfs (rw,sunit=4096,swidth=8192) However, neither sunit nor swidth is shown from the xfs_info output. # xfs_info /mnt meta-data=/dev/sdb1 isize=256 agcount=4, agsize=262144 blks = sectsz=512 attr=2 data = bsize=4096 blocks=1048576, imaxpct=25 = sunit=0 swidth=0 blks ^^^^^^^^^^^^^^^^^^^^^^^^^^ naming =version 2 bsize=4096 ascii-ci=0 log =internal bsize=4096 blocks=2560, version=2 = sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 The reason is that the alignment can only be changed if the relevant super block is already configured with alignments, otherwise, the given value is silently ignored. With this fix, the attempt to mount a storage without strip alignment setup on a super block will get an error with a warning in syslog to indicate the true cause, e.g. # mount -o sunit=4096,swidth=8192 /dev/sdb1 /mnt mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ....... XFS (sdb1): cannot change alignment: superblock does not support data alignment Signed-off-by: Jie Liu <jeff.liu@oracle.com> Cc: Mark Tinguely <tinguely@sgi.com> Cc: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: don't emit v5 superblock warnings on writeDave Chinner2013-05-301-7/+11
| | | | | | | | | | | | | | | | | | | | | | We write the superblock every 30s or so which results in the verifier being called. Right now that results in this output every 30s: XFS (vda): Version 5 superblock detected. This kernel has EXPERIMENTAL support enabled! Use of these features in this kernel is at your own risk! And spamming the logs. We don't need to check for whether we support v5 superblocks or whether there are feature bits we don't support set as these are only relevant when we first mount the filesytem. i.e. on superblock read. Hence for the write verification we can just skip all the checks (and hence verbose output) altogether. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: implement extended feature masksDave Chinner2013-04-271-6/+42
| | | | | | | | | | | The version 5 superblock has extended feature masks for compatible, incompatible and read-only compatible feature sets. Implement the masking and mount-time checking for these feature masks. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: add CRC checks to the superblockDave Chinner2013-04-271-16/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | With the addition of CRCs, there is such a wide and varied change to the on disk format that it makes sense to bump the superblock version number rather than try to use feature bits for all the new functionality. This commit introduces all the new superblock fields needed for all the new functionality: feature masks similar to ext4, separate project quota inodes, a LSN field for recovery and the CRC field. This commit does not bump the superblock version number, however. That will be done as a separate commit at the end of the series after all the new functionality is present so we switch it all on in one commit. This means that we can slowly introduce the changes without them being active and hence maintain bisectability of the tree. This patch is based on a patch originally written by myself back from SGI days, which was subsequently modified by Christoph Hellwig. There is relatively little of that patch remaining, but the history of the patch still should be acknowledged here. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: make use of XFS_SB_LOG_RES() at xfs_mount_log_sb()Jeff Liu2013-02-011-2/+2
| | | | | | | | | | Make use of XFS_SB_LOG_RES() at xfs_mount_log_sb(). Signed-off-by: Jie Liu <jeff.liu@oracle.com> CC: Dave Chinner <david@fromorbit.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: make use of XFS_SB_LOG_RES() at xfs_log_sbcount()Jeff Liu2013-02-011-2/+2
| | | | | | | | | Make use of XFS_SB_LOG_RES() at xfs_log_sbcount(). Signed-off-by: Jie Liu <jeff.liu@oracle.com> CC: Dave Chinner <david@fromorbit.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: calculate XFS_TRANS_QM_SBCHANGE space log reservation at mount timeJeff Liu2013-02-011-2/+2
| | | | | | | | | | | The transaction log space for clearing/reseting the quota flags is calculated out at runtime, this patch can figure it out at mount time. Signed-off-by: Jie Liu <jeff.liu@oracle.com> CC: Dave Chinner <david@fromorbit.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: Do not return EFSCORRUPTED when filesystem probe finds no XFS magicEric Sandeen2013-01-161-1/+1
| | | | | | | | | | | | 9802182 changed the return value from EWRONGFS (aka EINVAL) to EFSCORRUPTED which doesn't seem to be handled properly by the root filesystem probe. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Tested-by: Sergei Trofimovich <slyfox@gentoo.org> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: convert buffer verifiers to an ops structure.Dave Chinner2012-11-151-14/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | To separate the verifiers from iodone functions and associate read and write verifiers at the same time, introduce a buffer verifier operations structure to the xfs_buf. This avoids the need for assigning the write verifier, clearing the iodone function and re-running ioend processing in the read verifier, and gets rid of the nasty "b_pre_io" name for the write verifier function pointer. If we ever need to, it will also be easier to add further content specific callbacks to a buffer with an ops structure in place. We also avoid needing to export verifier functions, instead we can simply export the ops structures for those that are needed outside the function they are defined in. This patch also fixes a directory block readahead verifier issue it exposed. This patch also adds ops callbacks to the inode/alloc btree blocks initialised by growfs. These will need more work before they will work with CRCs. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Phil White <pwhite@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: connect up write verifiers to new buffersDave Chinner2012-11-151-1/+1
| | | | | | | | | | Metadata buffers that are read from disk have write verifiers already attached to them, but newly allocated buffers do not. Add appropriate write verifiers to all new metadata buffers. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: add pre-write metadata buffer verifier callbacksDave Chinner2012-11-151-2/+17
| | | | | | | | | | | | | | | | | | | | | These verifiers are essentially the same code as the read verifiers, but do not require ioend processing. Hence factor the read verifier functions and add a new write verifier wrapper that is used as the callback. This is done as one large patch for all verifiers rather than one patch per verifier as the change is largely mechanical. This includes hooking up the write verifier via the read verifier function. Hooking up the write verifier for buffers obtained via xfs_trans_get_buf() will be done in a separate patch as that touches code in many different places rather than just the verifier functions. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: verify superblocks as they are read from diskDave Chinner2012-11-151-37/+61
| | | | | | | | | | | | | | | | | Add a superblock verify callback function and pass it into the buffer read functions. Remove the now redundant verification code that is currently in use. Adding verification shows that secondary superblocks never have their "sb_inprogress" flag cleared by mkfs.xfs, so when validating the secondary superblocks during a grow operation we have to avoid checking this field. Even if we fix mkfs, we will still have to ignore this field for verification purposes unless a version of mkfs that does not have this bug was used. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Phil White <pwhite@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: uncached buffer reads need to return an errorDave Chinner2012-11-151-0/+6
| | | | | | | | | | | | | | | | | With verification being done as an IO completion callback, different errors can be returned from a read. Uncached reads only return a buffer or NULL on failure, which means the verification error cannot be returned to the caller. Split the error handling for these reads into two - a failure to get a buffer will still return NULL, but a read error will return a referenced buffer with b_error set rather than NULL. The caller is responsible for checking the error state of the buffer returned. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Phil White <pwhite@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: make buffer read verication an IO completion functionDave Chinner2012-11-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | Add a verifier function callback capability to the buffer read interfaces. This will be used by the callers to supply a function that verifies the contents of the buffer when it is read from disk. This patch does not provide callback functions, but simply modifies the interfaces to allow them to be called. The reason for adding this to the read interfaces is that it is very difficult to tell fom the outside is a buffer was just read from disk or whether we just pulled it out of cache. Supplying a callbck allows the buffer cache to use it's internal knowledge of the buffer to execute it only when the buffer is read from disk. It is intended that the verifier functions will mark the buffer with an EFSCORRUPTED error when verification fails. This allows the reading context to distinguish a verification error from an IO error, and potentially take further actions on the buffer (e.g. attempt repair) based on the error reported. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Phil White <pwhite@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: add background scanning to clear eofblocks inodesBrian Foster2012-11-081-0/+2
| | | | | | | | | | | | | | | | | | Create a new mount workqueue and delayed_work to enable background scanning and freeing of eofblocks inodes. The scanner kicks in once speculative preallocation occurs and stops requeueing itself when no eofblocks inodes exist. The scan interval is based on the new 'speculative_prealloc_lifetime' tunable (default to 5m). The background scanner performs unfiltered, best effort scans (which skips inodes under lock contention or with a dirty cache mapping). Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: rename xfs_sync.[ch] to xfs_icache.[ch]Dave Chinner2012-10-171-0/+1
| | | | | | | | | | | | | | xfs_sync.c now only contains inode reclaim functions and inode cache iteration functions. It is not related to sync operations anymore. Rename to xfs_icache.c to reflect it's contents and prepare for consolidation with the other inode cache file that exists (xfs_iget.c). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: Bring some sanity to log unmountingDave Chinner2012-10-171-24/+0
| | | | | | | | | | | | | | | | | | | When unmounting the filesystem, there are lots of operations that need to be done in a specific order, and they are spread across across a couple of functions. We have to drain the AIL before we write the unmount record, and we have to shut down the background log work before we do either of them. But this is all split haphazardly across xfs_unmountfs() and xfs_log_unmount(). Move all the AIL flushing and log manipulations to xfs_log_unmount() so that the responisbilities of each function is clear and the operations they perform obvious. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: rationalise xfs_mount_wq usersDave Chinner2012-10-171-2/+4
| | | | | | | | | | | | | | | | | | | | | | | Instead of starting and stopping background work on the xfs_mount_wq all at the same time, separate them to where they really are needed to start and stop. The xfs_sync_worker, only needs to be started after all the mount processing has completed successfully, while it needs to be stopped before the log is unmounted. The xfs_reclaim_worker is started on demand, and can be stopped before the unmount process does it's own inode reclaim pass. The xfs_flush_inodes work is run on demand, and so we really only need to ensure that it has stopped running before we start processing an unmount, freeze or remount,ro. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: reduce code duplication handling inode32/64 optionsCarlos Maiolino2012-09-261-38/+5
| | | | | | | | | | | | | | | | | Add xfs_set_inode32() to be used to enable inode32 allocation mode. this will reduce the amount of duplicated code needed to mount/remount a filesystem with inode32 option. This patch also changes xfs_set_inode64() to return the maximum AG number that inodes can be allocated instead of set mp->m_maxagi by itself, so that the behaviour is the same as xfs_set_inode32(). This simplifies code that calls these functions and needs to know the maximum AG that inodes can be allocated in. Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2012-08-011-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull second vfs pile from Al Viro: "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the deadlock reproduced by xfstests 068), symlink and hardlink restriction patches, plus assorted cleanups and fixes. Note that another fsfreeze deadlock (emergency thaw one) is *not* dealt with - the series by Fernando conflicts a lot with Jan's, breaks userland ABI (FIFREEZE semantics gets changed) and trades the deadlock for massive vfsmount leak; this is going to be handled next cycle. There probably will be another pull request, but that stuff won't be in it." Fix up trivial conflicts due to unrelated changes next to each other in drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c} * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits) delousing target_core_file a bit Documentation: Correct s_umount state for freeze_fs/unfreeze_fs fs: Remove old freezing mechanism ext2: Implement freezing btrfs: Convert to new freezing mechanism nilfs2: Convert to new freezing mechanism ntfs: Convert to new freezing mechanism fuse: Convert to new freezing mechanism gfs2: Convert to new freezing mechanism ocfs2: Convert to new freezing mechanism xfs: Convert to new freezing code ext4: Convert to new freezing mechanism fs: Protect write paths by sb_start_write - sb_end_write fs: Skip atime update on frozen filesystem fs: Add freezing handling to mnt_want_write() / mnt_drop_write() fs: Improve filesystem freezing handling switch the protection of percpu_counter list to spinlock nfsd: Push mnt_want_write() outside of i_mutex btrfs: Push mnt_want_write() outside of i_mutex fat: Push mnt_want_write() outside of i_mutex ...
| * xfs: Convert to new freezing codeJan Kara2012-07-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Generic code now blocks all writers from standard write paths. So we add blocking of all writers coming from ioctl (we get a protection of ioctl against racing remount read-only as a bonus) and convert xfs_file_aio_write() to a non-racy freeze protection. We also keep freeze protection on transaction start to block internal filesystem writes such as removal of preallocated blocks. CC: Ben Myers <bpm@sgi.com> CC: Alex Elder <elder@kernel.org> CC: xfs@oss.sgi.com Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | xfs: wait for the write the superblock on unmountMark Tinguely2012-07-291-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | v2: Add the xfs_buf_lock to xfs_quiesce_attr(). Add explaination why xfs_buf_lock() is used to wait for write. xfs_wait_buftarg() does not wait for the completion of the write of the uncached superblock. This write can race with the shutdown of the log and causes a panic if the write does not win the race. During the log write, xfsaild_push() will lock the buffer and set the XBF_ASYNC flag. Because the XBF_FLAG is set, complete() is not performed on the buffer's iowait entry, we cannot call xfs_buf_iowait() to wait for the write to complete. The buffer's lock is held until the write is complete, so we can block on a xfs_buf_lock() request to be notified that the write is complete. Signed-off-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
* | xfs: m_maxioffset is redundantDave Chinner2012-06-141-2/+0
|/ | | | | | | | | | The m_maxioffset field in the struct xfs_mount contains the same value as the superblock s_maxbytes field. There is no need to carry two copies of this limit around, so use the VFS superblock version. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: flush outstanding buffers on log mount failureDave Chinner2012-05-141-2/+6
| | | | | | | | | | | | | | | | | When we fail to mount the log in xfs_mountfs(), we tear down all the infrastructure we have already allocated. However, the process of mounting the log may have progressed to the point of reading, caching and modifying buffers in memory. Hence before we can free all the infrastructure, we have to flush and remove all the buffers from memory. Problem first reported by Eric Sandeen, later a different incarnation was reported by Ben Myers. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: move xfs_get_extsz_hint() and kill xfs_rw.hDave Chinner2012-05-141-1/+0
| | | | | | | | | | | | | The only thing left in xfs_rw.h is a function prototype for an inode function. Move that to xfs_inode.h, and kill xfs_rw.h. Also move the function implementing the prototype from xfs_rw.c to xfs_inode.c so we only have one function left in xfs_rw.c Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: clean up buffer get/read call APIDave Chinner2012-05-141-6/+6
| | | | | | | | | | | | | | | | | | | | | The xfs_buf_get/read API is not consistent in the units it uses, and does not use appropriate or consistent units/types for the variables. Convert the API to use disk addresses and block counts for all buffer get and read calls. Use consistent naming for all the functions and their declarations, and convert the internal functions to use disk addresses and block counts to avoid need to convert them from one type to another and back again. Fix all the callers to use disk addresses and block counts. In many cases, this removes an additional conversion from the function call as the callers already have a block count. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: implement freezing by emptying the AILChristoph Hellwig2012-05-141-44/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we write back all metadata either synchronously or through the AIL we can simply implement metadata freezing in terms of emptying the AIL. The implementation for this is fairly simply and straight-forward: A new routine is added that asks the xfsaild to push the AIL to the end and waits for it to complete and send a wakeup. The routine will then loop if the AIL is not actually empty, and continue to do so until the AIL is compeltely empty. We keep an inode reclaim pass in the freeze process to avoid having memory pressure have to reclaim inodes that require dirtying the filesystem to be reclaimed after the freeze has completed. This means we can also treat unmount in the exact same way as freeze. As an upside we can now remove the radix tree based inode writeback and xfs_unmountfs_writesb. [ Dave Chinner: - Cleaned up commit message. - Added inode reclaim passes back into freeze. - Cleaned up wakeup mechanism to avoid the use of a new sleep counter variable. ] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* Change xfs_sb_from_disk() interface to take a mount pointerChandra Seetharaman2012-02-031-2/+4
| | | | | | | | | | | | | Change xfs_sb_from_disk() interface to take a mount pointer instead of a superblock pointer. This is to print mount point specific error messages in future fixes. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
OpenPOWER on IntegriCloud