summaryrefslogtreecommitdiffstats
path: root/fs/xfs/xfs_dquot.c
Commit message (Collapse)AuthorAgeFilesLines
* xfs: use tr_qm_dqalloc log reservation for dquot allocBrian Foster2014-02-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dquot allocation path in xfs_qm_dqread() currently uses the attribute set log reservation, which appears to be incorrect. We have reports of transaction reservation overruns with the current code. E.g., a repeated run of xfstests test generic/270 on a 512b block size fs occassionally produces the following in dmesg: XFS (sdN): xlog_write: reservation summary: trans type = QM_DQALLOC (30) unit res = 7080 bytes current res = -632 bytes total reg = 0 bytes (o/flow = 0 bytes) ophdrs = 0 (ophdr space = 0 bytes) ophdr + reg = 0 bytes num regions = 0 XFS (sdN): xlog_write: reservation ran out. Need to up reservation The dquot allocation case should consist of a write reservation (i.e., we are allocating a range of the internal quota file) plus the size of the actual dquots. We already have a log reservation definition for this operation (tr_qm_dqalloc). Use it in xfs_qm_dqread() and update the log reservation calculation function to use the write res. calculation function rather than reading the assumed to be pre-calculated value directly. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
* xfs: use xfs_ilock_data_map_shared in xfs_qm_dqtobpChristoph Hellwig2013-12-181-3/+4
| | | | | | | | | | We might not have read in the extent list at this point, so make sure we take the ilock exclusively if we have to do so. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: decouple inode and bmap btree header filesDave Chinner2013-10-231-4/+1
| | | | | | | | | | | | | | | | | | | | Currently the xfs_inode.h header has a dependency on the definition of the BMAP btree records as the inode fork includes an array of xfs_bmbt_rec_host_t objects in it's definition. Move all the btree format definitions from xfs_btree.h, xfs_bmap_btree.h, xfs_alloc_btree.h and xfs_ialloc_btree.h to xfs_format.h to continue the process of centralising the on-disk format definitions. With this done, the xfs inode definitions are no longer dependent on btree header files. The enables a massive culling of unnecessary includes, with close to 200 #include directives removed from the XFS kernel code base. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: decouple log and transaction headersDave Chinner2013-10-231-4/+6
| | | | | | | | | | | | | | | | | | | | | xfs_trans.h has a dependency on xfs_log.h for a couple of structures. Most code that does transactions doesn't need to know anything about the log, but this dependency means that they have to include xfs_log.h. Decouple the xfs_trans.h and xfs_log.h header files and clean up the includes to be in dependency order. In doing this, remove the direct include of xfs_trans_reserve.h from xfs_trans.h so that we remove the dependency between xfs_trans.h and xfs_mount.h. Hence the xfs_trans.h include can be moved to the indicate the actual dependencies other header files have on it. Note that these are kernel only header files, so this does not translate to any userspace changes at all. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: split dquot buffer operations outDave Chinner2013-10-231-114/+3
| | | | | | | | | | | Parts of userspace want to be able to read and modify dquot buffers (e.g. xfs_db) so we need to split out the reading and writing of these buffers so it is easy to shared code with libxfs in userspace. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: create a shared header file for format-related informationDave Chinner2013-10-231-0/+1
| | | | | | | | | | | | | | | | | | | All of the buffer operations structures are needed to be exported for xfs_db, so move them all to a common location rather than spreading them all over the place. They are verifying the on-disk format, so while xfs_format.h might be a good place, it is not part of the on disk format. Hence we need to create a new header file that we centralise these related definitions. Start by moving the bffer operations structures, and then also move all the other definitions that have crept into xfs_log_format.h and xfs_format.h as there was no other shared header file to put them in. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: lockdep needs to know about 3 dquot-deep nestingDave Chinner2013-09-301-3/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Michael Semon reported that xfs/299 generated this lockdep warning: ============================================= [ INFO: possible recursive locking detected ] 3.12.0-rc2+ #2 Not tainted --------------------------------------------- touch/21072 is trying to acquire lock: (&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64 but task is already holding lock: (&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&xfs_dquot_other_class); lock(&xfs_dquot_other_class); *** DEADLOCK *** May be due to missing lock nesting notation 7 locks held by touch/21072: #0: (sb_writers#10){++++.+}, at: [<c11185b6>] mnt_want_write+0x1e/0x3e #1: (&type->i_mutex_dir_key#4){+.+.+.}, at: [<c11078ee>] do_last+0x245/0xe40 #2: (sb_internal#2){++++.+}, at: [<c122c9e0>] xfs_trans_alloc+0x1f/0x35 #3: (&(&ip->i_lock)->mr_lock/1){+.+...}, at: [<c126cd1b>] xfs_ilock+0x100/0x1f1 #4: (&(&ip->i_lock)->mr_lock){++++-.}, at: [<c126cf52>] xfs_ilock_nowait+0x105/0x22f #5: (&dqp->q_qlock){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64 #6: (&xfs_dquot_other_class){+.+...}, at: [<c12902fb>] xfs_trans_dqlockedjoin+0x57/0x64 The lockdep annotation for dquot lock nesting only understands locking for user and "other" dquots, not user, group and quota dquots. Fix the annotations to match the locking heirarchy we now have. Reported-by: Michael L. Semon <mlsemon35@gmail.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: convert dquot cache lru to list_lruDave Chinner2013-09-101-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the XFS dquot lru to use the list_lru construct and convert the shrinker to being node aware. [glommer@openvz.org: edited for conflicts + warning fixes] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* xfs: refactor xfs_trans_reserve() interfaceJie Liu2013-08-121-4/+2
| | | | | | | | | | | | | | | | With the new xfs_trans_res structure has been introduced, the log reservation size, log count as well as log flags are pre-initialized at mount time. So it's time to refine xfs_trans_reserve() interface to be more neat. Also, introduce a new helper M_RES() to return a pointer to the mp->m_resv structure to simplify the input. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: create xfs_bmap_util.[ch]Dave Chinner2013-08-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | There is a bunch of code in xfs_bmap.c that is kernel specific and not shared with userspace. To minimise the difference between the kernel and userspace code, shift this unshared code to xfs_bmap_util.c, and the declarations to xfs_bmap_util.h. The biggest issue here is xfs_bmap_finish() - userspace has it's own definition of this function, and so we need to move it out of xfs_bmap.[ch]. This means several other files need to include xfs_bmap_util.h as well. It also introduces and interesting dance for the stack switching code in xfs_bmapi_allocate(). The stack switching/workqueue code is actually moved to xfs_bmap_util.c, so that userspace can simply use a #define in a header file to connect the dots without needing to know about the stack switch code at all. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: separate dquot on disk format definitions out of xfs_quota.hDave Chinner2013-08-121-0/+1
| | | | | | | | | | | | | The on disk format definitions of the on-disk dquot, log formats and quota off log formats are all intertwined with other definitions for quotas. Separate them out into their own header file so they can easily be shared with userspace. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: Add pquota fields where gquota is used.Chandra Seetharaman2013-07-111-3/+12
| | | | | | | | | | | | | | | | | | | Add project quota changes to all the places where group quota field is used: * add separate project quota members into various structures * split project quota and group quotas so that instead of overriding the group quota members incore, the new project quota members are used instead * get rid of usage of the OQUOTA flag incore, in favor of separate group and project quota flags. * add a project dquot argument to various functions. Not using the pquotino field from superblock yet. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: Code cleanup and removal of some typedef usageChandra Seetharaman2013-06-281-6/+6
| | | | | | | | | | | In preparation for combined pquota/gquota support, for the sake of readability, do some code cleanup surrounding the affected code. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: Replace macro XFS_DQ_TO_QIP with a functionChandra Seetharaman2013-06-281-1/+1
| | | | | | | | | | In preparation for combined pquota/gquota support, for the sake of readability, change the macro to an inline function. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: Replace macro XFS_DQUOT_TREE with a functionChandra Seetharaman2013-06-281-1/+1
| | | | | | | | | | In preparation for combined pquota/gquota support, for the sake of readability, change the macro to an inline function. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: rework dquot CRCsDave Chinner2013-06-041-21/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Calculating dquot CRCs when the backing buffer is written back just doesn't work reliably. There are several places which manipulate dquots directly in the buffers, and they don't calculate CRCs appropriately, nor do they always set the buffer up to calculate CRCs appropriately. Firstly, if we log a dquot buffer (e.g. during allocation) it gets logged without valid CRC, and so on recovery we end up with a dquot that is not valid. Secondly, if we recover/repair a dquot, we don't have a verifier attached to the buffer and hence CRCs are not calculated on the way down to disk. Thirdly, calculating the CRC after we've changed the contents means that if we re-read the dquot from the buffer, we cannot verify the contents of the dquot are valid, as the CRC is invalid. So, to avoid all the dquot CRC errors that are being detected by the read verifier, change to using the same model as for inodes. That is, dquot CRCs are calculated and written to the backing buffer at the time the dquot is flushed to the backing buffer. If we modify the dquot directly in the backing buffer, calculate the CRC immediately after the modification is complete. Hence the dquot in the on-disk buffer should always have a valid CRC. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: add CRC checks for quota blocksChristoph Hellwig2013-04-211-13/+99
| | | | | | | | | | | | | | Use the reserved space in struct xfs_dqblk to store a UUID and a crc for the quota blocks. [dchinner@redhat.com] Add a LSN field and update for current verifier infrastructure. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: xfs_dquot prealloc throttling watermarks and low free spaceBrian Foster2013-03-221-2/+39
| | | | | | | | | | | | | | | | | | | | | | Enable tracking of high and low watermarks for preallocation throttling of files under quota restrictions. These values are calculated when the quota limit is read from disk or modified and cached for later use by the throttling algorithm. The high watermark specifies when preallocation is disabled, the low watermark specifies when throttling is enabled and the low free space data structure contains precalculated low free space limits to serve as input to determine the level of throttling required. Note that the low free space data structure is based on the existing global low free space data structure with the exception of using three stages (5%, 3% and 1%) rather than five to reduce the impact of xfs_dquot memory overhead. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: pass xfs_dquot to xfs_qm_adjust_dqlimits() instead of xfs_disk_dquot_tBrian Foster2013-03-221-3/+4
| | | | | | | | | | | Modify xfs_qm_adjust_dqlimits() to take the xfs_dquot as a parameter instead of just the xfs_disk_dquot_t so we can update in-memory fields if necessary. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: calculate XFS_TRANS_QM_DQALLOC space log reservation at mount timeJeff Liu2013-02-011-9/+3
| | | | | | | | | | | The disk quota allocation log space reservation is calcuated at runtime, this patch does it at mount time. Signed-off-by: Jie Liu <jeff.liu@oracle.com> CC: Dave Chinner <david@fromorbit.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: convert buffer verifiers to an ops structure.Dave Chinner2012-11-151-8/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | To separate the verifiers from iodone functions and associate read and write verifiers at the same time, introduce a buffer verifier operations structure to the xfs_buf. This avoids the need for assigning the write verifier, clearing the iodone function and re-running ioend processing in the read verifier, and gets rid of the nasty "b_pre_io" name for the write verifier function pointer. If we ever need to, it will also be easier to add further content specific callbacks to a buffer with an ops structure in place. We also avoid needing to export verifier functions, instead we can simply export the ops structures for those that are needed outside the function they are defined in. This patch also fixes a directory block readahead verifier issue it exposed. This patch also adds ops callbacks to the inode/alloc btree blocks initialised by growfs. These will need more work before they will work with CRCs. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Phil White <pwhite@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: connect up write verifiers to new buffersDave Chinner2012-11-151-53/+51
| | | | | | | | | | Metadata buffers that are read from disk have write verifiers already attached to them, but newly allocated buffers do not. Add appropriate write verifiers to all new metadata buffers. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: add pre-write metadata buffer verifier callbacksDave Chinner2012-11-151-6/+21
| | | | | | | | | | | | | | | | | | | | | These verifiers are essentially the same code as the read verifiers, but do not require ioend processing. Hence factor the read verifier functions and add a new write verifier wrapper that is used as the callback. This is done as one large patch for all verifiers rather than one patch per verifier as the change is largely mechanical. This includes hooking up the write verifier via the read verifier function. Hooking up the write verifier for buffers obtained via xfs_trans_get_buf() will be done in a separate patch as that touches code in many different places rather than just the verifier functions. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: verify dquot blocks as they are read from diskDave Chinner2012-11-151-22/+95
| | | | | | | | | | | | | | Add a dquot buffer verify callback function and pass it into the buffer read functions. This checks all the dquots in a buffer, but cannot completely verify the dquot ids are correct. Also, errors cannot be repaired, so an additional function is added to repair bad dquots in the buffer if such an error is detected in a context where repair is allowed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Phil White <pwhite@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: make buffer read verication an IO completion functionDave Chinner2012-11-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Add a verifier function callback capability to the buffer read interfaces. This will be used by the callers to supply a function that verifies the contents of the buffer when it is read from disk. This patch does not provide callback functions, but simply modifies the interfaces to allow them to be called. The reason for adding this to the read interfaces is that it is very difficult to tell fom the outside is a buffer was just read from disk or whether we just pulled it out of cache. Supplying a callbck allows the buffer cache to use it's internal knowledge of the buffer to execute it only when the buffer is read from disk. It is intended that the verifier functions will mark the buffer with an EFSCORRUPTED error when verification fails. This allows the reading context to distinguish a verification error from an IO error, and potentially take further actions on the buffer (e.g. attempt repair) based on the error reported. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Phil White <pwhite@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: move xfsagino_t to xfs_types.hDave Chinner2012-05-141-1/+0
| | | | | | | | | | | Untangle the header file includes a bit by moving the definition of xfs_agino_t to xfs_types.h. This removes the dependency that xfs_ag.h has on xfs_inum.h, meaning we don't need to include xfs_inum.h everywhere we include xfs_ag.h. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: pass shutdown method into xfs_trans_ail_delete_bulkDave Chinner2012-05-141-2/+3
| | | | | | | | | | | | xfs_trans_ail_delete_bulk() can be called from different contexts so if the item is not in the AIL we need different shutdown for each context. Pass in the shutdown method needed so the correct action can be taken. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: on-stack delayed write buffer listsChristoph Hellwig2012-05-141-33/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Queue delwri buffers on a local on-stack list instead of a per-buftarg one, and write back the buffers per-process instead of by waking up xfsbufd. This is now easily doable given that we have very few places left that write delwri buffers: - log recovery: Only done at mount time, and already forcing out the buffers synchronously using xfs_flush_buftarg - quotacheck: Same story. - dquot reclaim: Writes out dirty dquots on the LRU under memory pressure. We might want to look into doing more of this via xfsaild, but it's already more optimal than the synchronous inode reclaim that writes each buffer synchronously. - xfsaild: This is the main beneficiary of the change. By keeping a local list of buffers to write we reduce latency of writing out buffers, and more importably we can remove all the delwri list promotions which were hitting the buffer cache hard under sustained metadata loads. The implementation is very straight forward - xfs_buf_delwri_queue now gets a new list_head pointer that it adds the delwri buffers to, and all callers need to eventually submit the list using xfs_buf_delwi_submit or xfs_buf_delwi_submit_nowait. Buffers that already are on a delwri list are skipped in xfs_buf_delwri_queue, assuming they already are on another delwri list. The biggest change to pass down the buffer list was done to the AIL pushing. Now that we operate on buffers the trylock, push and pushbuf log item methods are merged into a single push routine, which tries to lock the item, and if possible add the buffer that needs writeback to the buffer list. This leads to much simpler code than the previous split but requires the individual IOP_PUSH instances to unlock and reacquire the AIL around calls to blocking routines. Given that xfsailds now also handle writing out buffers, the conditions for log forcing and the sleep times needed some small changes. The most important one is that we consider an AIL busy as long we still have buffers to push, and the other one is that we do increment the pushed LSN for buffers that are under flushing at this moment, but still count them towards the stuck items for restart purposes. Without this we could hammer on stuck items without ever forcing the log and not make progress under heavy random delete workloads on fast flash storage devices. [ Dave Chinner: - rebase on previous patches. - improved comments for XBF_DELWRI_Q handling - fix XBF_ASYNC handling in queue submission (test 106 failure) - rename delwri submit function buffer list parameters for clarity - xfs_efd_item_push() should return XFS_ITEM_PINNED ] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: do not write the buffer from xfs_qm_dqflushChristoph Hellwig2012-05-141-30/+13
| | | | | | | | | | | | | | | Instead of writing the buffer directly from inside xfs_qm_dqflush return it to the caller and let the caller decide what to do with the buffer. Also remove the pincount check in xfs_qm_dqflush that all non-blocking callers already implement and the now unused flags parameter and the XFS_DQ_IS_DIRTY check that all callers already perform. [ Dave Chinner: fixed build error cause by missing '{'. ] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: remove log item from AIL in xfs_iflush after a shutdownChristoph Hellwig2012-05-141-2/+1
| | | | | | | | | | | | | | If a filesystem has been forced shutdown we are never going to write inodes to disk, which means the inode items will stay in the AIL until we free the inode. Currently that is not a problem, but a pending change requires us to empty the AIL before shutting down the filesystem. In that case leaving the inode in the AIL is lethal. Make sure to remove the log item from the AIL to allow emptying the AIL on shutdown filesystems. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: remove log item from AIL in xfs_qm_dqflush after a shutdownChristoph Hellwig2012-05-141-1/+13
| | | | | | | | | | | | | | If a filesystem has been forced shutdown we are never going to write dquots to disk, which means the dquot items will stay in the AIL forever. Currently that is not a problem, but a pending chance requires us to empty the AIL before shutting down the filesystem, in which case this behaviour is lethal. Make sure to remove the log item from the AIL to allow emptying the AIL on shutdown filesystems. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* fs: xfs: fix section mismatch in linux-nextGerard Snitselaar2012-03-221-1/+1
| | | | | | | | | xfs_qm_exit() is called in init_xfs_fs(). Signed-off-by: Gerard Snitselaar <dev@snitselaar.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: remove the global xfs_Gqm structureChristoph Hellwig2012-03-141-2/+33
| | | | | | | | | | | If we initialize the slab caches for the quota code when XFS is loaded there is no need for a global and reference counted quota manager structure. Drop all this overhead and also fix the error handling during quota initialization. Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: remove the per-filesystem list of dquotsChristoph Hellwig2012-03-141-92/+3
| | | | | | | | | | | Instead of keeping a separate per-filesystem list of dquots we can walk the radix tree for the two places where we need to iterate all quota structures. Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: use per-filesystem radix trees for dquot lookupChristoph Hellwig2012-03-141-140/+48
| | | | | | | | | | | Replace the global hash tables for looking up in-memory dquot structures with per-filesystem radix trees to allow scaling to a large number of in-memory dquot structures. Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: per-filesystem dquot LRU listsChristoph Hellwig2012-03-141-40/+44
| | | | | | | | | | | | | | | | Replace the global dquot lru lists with a per-filesystem one. Note that the shrinker isn't wire up to the per-superblock VFS shrinker infrastructure as would have problems summing up and splitting the counts for inodes and dquots. I don't think this is a major problem as the quota cache isn't as interwinded with the inode cache as the dentry cache is, because an inode that is dropped from the cache will generally release a dquot reference, but most of the time it won't be the last one. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: use common code for quota statisticsChristoph Hellwig2012-03-141-6/+8
| | | | | | | | | | | | Switch the quota code over to use the generic XFS statistics infrastructure. While the legacy /proc/fs/xfs/xqm and /proc/fs/xfs/xqmstats interfaces are preserved for now the statistics that still have a meaning with the current code are now also available from /proc/fs/xfs/stats. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: remove xfs_trans_unlocked_itemChristoph Hellwig2012-02-221-11/+0
| | | | | | | | | | | | | | | There is no reason to wake up log space waiters when unlocking inodes or dquots, and the commit log has no explanation for this function either. Given that we now have exact log space wakeups everywhere we can assume the reason for this function was to paper over log space races in earlier XFS versions. Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: change available ranges of softlimit and hardlimit in quota checkMitsuo Hayasaka2012-02-211-12/+12
| | | | | | | | | | | | | | | | | In general, quota allows us to use disk blocks and inodes up to each limit, that is, they are available if they don't exceed their limitations. Current xfs sets their available ranges to lower than them except disk inode quota check. So, this patch changes the ranges to not beyond them. Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Cc: Ben Myers <bpm@sgi.com> Cc: Alex Elder <elder@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 20f12d8ac01917d96860f352f67eddd912df0afb)
* xfs: use a normal shrinker for the dquot freelistChristoph Hellwig2012-02-101-77/+26
| | | | | | | | | | | | | | | | | | | | | Stop reusing dquots from the freelist when allocating new ones directly, and implement a shrinker that actually follows the specifications for the interface. The shrinker implementation is still highly suboptimal at this point, but we can gradually work on it. This also fixes an bug in the previous lock ordering, where we would take the hash and dqlist locks inside of the freelist lock against the normal lock ordering. This is only solvable by introducing the dispose list, and thus not when using direct reclaim of unused dquots for new allocations. As a side-effect the quota upper bound and used to free ratio values in /proc/fs/xfs/xqm are set to 0 as these values don't make any sense in the new world order. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 04da0c8196ac0b12fb6b84f4b7a51ad2fa56d869)
* Define a new function xfs_inode_dquot()Chandra Seetharaman2012-02-031-24/+9
| | | | | | | | | | | | | Define a new function xfs_inode_dquot() that takes a inode pointer and a disk quota type and returns the quota pointer for the specified quota type. This simplifies the xfs_qm_dqget() error path significantly. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
* Define a new function xfs_this_quota_on()Chandra Seetharaman2012-02-031-2/+2
| | | | | | | | | | | Create a new function xfs_this_quota_on() that takes a xfs_mount data structure and a disk quota type and returns true if the specified type of quota is ON in the xfs_mount data structure. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: remove XFS_QMOPT_DQSUSERChristoph Hellwig2011-12-151-21/+6
| | | | | | | | | | | Just read the id 0 dquot from disk directly in xfs_qm_init_quotainfo instead of going through dqget and requiring a special flag to not add the dquot to any lists. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: kill xfs_qm_idtodqChristoph Hellwig2011-12-151-87/+50
| | | | | | | | | | This function doesn't help the code flow, so merge the dquot allocation and transaction handling into xfs_qm_dqread. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: merge xfs_qm_dqinit_core into the only callerChristoph Hellwig2011-12-151-20/+7
| | | | | | | Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: add a xfs_dqhold helperChristoph Hellwig2011-12-151-1/+1
| | | | | | | | | | | | | | | | Factor the common pattern of: xfs_dqlock(dqp); XFS_DQHOLD(dqp); xfs_dqunlock(dqp); into a new helper, and remove XFS_DQHOLD now that only one other caller is left. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: nest qm_dqfrlist_lock inside the dquot qlockChristoph Hellwig2011-12-141-59/+38
| | | | | | | | | | | | | | Allow xfs_qm_dqput to work without trylock loops by nesting the freelist lock inside the dquot qlock. In turn that requires trylocks in the reclaim path instead, but given it's a classic tradeoff between fast and slow path, and we follow the model of the inode and dentry caches. Document our new lock order now that it has settled. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: flatten the dquot lock orderingChristoph Hellwig2011-12-141-63/+50
| | | | | | | | | | | | | Introduce a new XFS_DQ_FREEING flag that tells lookup and mplist walks to skip a dquot that is beeing freed, and use this avoid the trylock on the hash and mplist locks in xfs_qm_dqreclaim_one. Also simplify xfs_dqpurge by moving the inodes to a dispose list after marking them XFS_DQ_FREEING and avoid the locker ordering constraints. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: implement lazy removal for the dquot freelistChristoph Hellwig2011-12-131-49/+18
| | | | | | | | | | | | | Do not remove dquots from the freelist when we grab a reference to them in xfs_qm_dqlookup, but leave them on the freelist util scanning notices that they have a reference. This speeds up the lookup fastpath, and greatly simplifies the lock ordering constraints. Note that the same scheme is used by the VFS inode and dentry caches. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
* xfs: remove XFS_DQ_INACTIVEChristoph Hellwig2011-12-131-11/+17
| | | | | | | | | | | Free dquots when purging them during umount instead of keeping them around on the freelist in a degraded state. The out of order locking in xfs_qm_dqpurge will be removed again later in this series. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
OpenPOWER on IntegriCloud