summaryrefslogtreecommitdiffstats
path: root/fs/ocfs2/ocfs2.h
Commit message (Collapse)AuthorAgeFilesLines
* ocfs2: recover orphans in offline slots during recovery and mountSrinivas Eeda2009-04-031-0/+2
| | | | | | | | | | | | | | | | | During recovery, a node recovers orphans in it's slot and the dead node(s). But if the dead nodes were holding orphans in offline slots, they will be left unrecovered. If the dead node is the last one to die and is holding orphans in other slots and is the first one to mount, then it only recovers it's own slot, which leaves orphans in offline slots. This patch queues complete_recovery to clean orphans for all offline slots during mount and node recovery. Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: fix rare stale inode errors when exporting via nfswengang wang2009-04-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For nfs exporting, ocfs2_get_dentry() returns the dentry for fh. ocfs2_get_dentry() may read from disk when the inode is not in memory, without any cross cluster lock. this leads to the file system loading a stale inode. This patch fixes above problem. Solution is that in case of inode is not in memory, we get the cluster lock(PR) of alloc inode where the inode in question is allocated from (this causes node on which deletion is done sync the alloc inode) before reading out the inode itsself. then we check the bitmap in the group (the inode in question allcated from) to see if the bit is clear. if it's clear then it's stale. if the bit is set, we then check generation as the existing code does. We have to read out the inode in question from disk first to know its alloc slot and allot bit. And if its not stale we read it out using ocfs2_iget(). The second read should then be from cache. And also we have to add a per superblock nfs_sync_lock to cover the lock for alloc inode and that for inode in question. this is because ocfs2_get_dentry() and ocfs2_delete_inode() lock on them in reverse order. nfs_sync_lock is locked in EX mode in ocfs2_get_dentry() and in PR mode in ocfs2_delete_inode(). so that mutliple ocfs2_delete_inode() can run concurrently in normal case. [mfasheh@suse.com: build warning fixes and comment cleanups] Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Optimize inode group allocation by recording last used group.Tao Ma2009-04-031-0/+3
| | | | | | | | | | | | | | | | | | In ocfs2, the block group search looks for the "emptiest" group to allocate from. So if the allocator has many equally(or almost equally) empty groups, new block group will tend to get spread out amongst them. So we add osb_inode_alloc_group in ocfs2_super to record the last used inode allocation group. For more details, please see http://oss.oracle.com/osswiki/OCFS2/DesignDocs/InodeAllocationStrategy. I have done some basic test and the results are a ten times improvement on some cold-cache stat workloads. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: fix leaf start calculation in ocfs2_dx_dir_rebalance()Mark Fasheh2009-04-031-0/+10
| | | | | | | | | | | | ocfs2_dx_dir_rebalance() is passed the block offset of a dx leaf which needs rebalancing. Since we rebalance an entire cluster at a time however, this function needs to calculate the beginning of that cluster, in blocks. The calculation was wrong, which would result in a read of non-leaf blocks. Fix the calculation by adding ocfs2_block_to_cluster_start() which is a more straight-forward way of determining this. Reported-by: Tristan Ye <tristan.ye@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Increase max links countMark Fasheh2009-04-031-0/+38
| | | | | | | | | Since we've now got a directory format capable of handling a large number of entries, we can increase the maximum link count supported. This only gets increased if the directory indexing feature is turned on. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: Add a name indexed b-tree to directory inodesMark Fasheh2009-04-031-0/+16
| | | | | | | | | | | | | | | | This patch makes use of Ocfs2's flexible btree code to add an additional tree to directory inodes. The new tree stores an array of small, fixed-length records in each leaf block. Each record stores a hash value, and pointer to a block in the traditional (unindexed) directory tree where a dirent with the given name hash resides. Lookup exclusively uses this tree to find dirents, thus providing us with constant time name lookups. Some of the hashing code was copied from ext3. Unfortunately, it has lots of unfixed checkpatch errors. I left that as-is so that tracking changes would be easier. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: Remove debugfs file local_alloc_statsSunil Mushran2009-04-031-5/+0
| | | | | | | | This patch removes the debugfs file local_alloc_stats as that information is now included in the fs_state debugfs file. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Expose the file system state via debugfsSunil Mushran2009-04-031-0/+1
| | | | | | | | | | This patch creates a per mount debugfs file, fs_state, which exposes information like, cluster stack in use, states of the downconvert, recovery and commit threads, number of journal txns, some allocation stats, list of all slots, etc. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: lock the metaecc process for xattr bucketTao Ma2009-02-261-0/+3
| | | | | | | | | | | For other metadata in ocfs2, metaecc is checked in ocfs2_read_blocks with io_mutex held. While for xattr bucket, it is calculated by the whole buckets. So we have to add a spin_lock to prevent multiple processes calculating metaecc. Signed-off-by: Tao Ma <tao.ma@oracle.com> Tested-by: Tristan Ye <tristan.ye@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Push out dropping of dentry lock to ocfs2_wqJan Kara2009-02-021-0/+6
| | | | | | | | | | Dropping of last reference to dentry lock is a complicated operation involving dropping of reference to inode. This can get complicated and quota code in particular needs to obtain some quota locks which leads to potential deadlock. Thus we defer dropping of inode reference to ocfs2_wq. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Add directory block trailers.Mark Fasheh2009-01-051-0/+3
| | | | | | | | | | | | | | | | Future ocfs2 features metaecc and indexed directories need to store a little bit of data in each dirblock. For compatibility, we place this in a trailer at the end of the dirblock. The trailer plays itself as an empty dirent, so that if the features are turned off, it can be reused without requiring a tunefs scan. This code adds the trailer and validates it when the block is read in. [ Mark is the original author, but I reinserted this code before his dir index work. -- Joel ] Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Use metadata-specific ocfs2_journal_access_*() functions.Joel Becker2009-01-051-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | The per-metadata-type ocfs2_journal_access_*() functions hook up jbd2 commit triggers and allow us to compute metadata ecc right before the buffers are written out. This commit provides ecc for inodes, extent blocks, group descriptors, and quota blocks. It is not safe to use extened attributes and metaecc at the same time yet. The ocfs2_extent_tree and ocfs2_path abstractions in alloc.c both hide the type of block at their root. Before, it didn't matter, but now the root block must use the appropriate ocfs2_journal_access_*() function. To keep this abstract, the structures now have a pointer to the matching journal_access function and a wrapper call to call it. A few places use naked ocfs2_write_block() calls instead of adding the blocks to the journal. We make sure to calculate their checksum and ecc before the write. Since we pass around the journal_access functions. Let's typedef them in ocfs2.h. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Add the underlying blockcheck code.Joel Becker2009-01-051-0/+8
| | | | | | | | | | | | | | This is the code that computes crc32 and ecc for ocfs2 metadata blocks. There are high-level functions that check whether the filesystem has the ecc feature, mid-level functions that work on a single block or array of buffer_heads, and the low-level ecc hamming code that can handle multiple buffers like crc32_le(). It's not hooked up to the filesystem yet. Signed-off-by: Joel Becker <joel.becker@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Enable quota accounting on mount, disable on umountJan Kara2009-01-051-0/+3
| | | | | | | | | Enable quota usage tracking on mount and disable it on umount. Also add support for quota on and quota off quotactls and usrquota and grpquota mount options. Add quota features among supported ones. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Implement quota recoveryJan Kara2009-01-051-1/+3
| | | | | | | | Implement functions for recovery after a crash. Functions just read local quota file and sync info to global quota file. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Wrap extent block reads in a dedicated function.Joel Becker2009-01-051-8/+0
| | | | | | | | | | We weren't consistently checking extent blocks after we read them. Most places checked the signature, but none checked h_blkno or h_fs_signature. Create a toplevel ocfs2_read_extent_block() that does the read and the validation. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Morph the haphazard OCFS2_IS_VALID_GROUP_DESC() checks.Joel Becker2009-01-051-7/+0
| | | | | | | | | | | | | Random places in the code would check a group descriptor bh to see if it was valid. The previous commit unified descriptor block reads, validating all block reads in the same place. Thus, these checks are no longer necessary. Rather than eliminate them, however, we change them to BUG_ON() checks. This ensures the assumptions remain true. All of the code paths to these checks have been audited to ensure they come from a validated descriptor read. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Morph the haphazard OCFS2_IS_VALID_DINODE() checks.Joel Becker2009-01-051-8/+0
| | | | | | | | | | | | | | | | Random places in the code would check a dinode bh to see if it was valid. Not only did they do different levels of validation, they handled errors in different ways. The previous commit unified inode block reads, validating all block reads in the same place. Thus, these haphazard checks are no longer necessary. Rather than eliminate them, however, we change them to BUG_ON() checks. This ensures the assumptions remain true. All of the code paths to these checks have been audited to ensure they come from a validated inode read. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: add POSIX ACL APITiger Yang2009-01-051-0/+1
| | | | | | | | | This patch adds POSIX ACL(access control lists) APIs in ocfs2. We convert struct posix_acl to many ocfs2_acl_entry and regard them as an extended attribute entry. Signed-off-by: Tiger Yang <tiger.yang@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: comments typo fixColy Li2008-12-011-1/+1
| | | | | | | This patch fixes two typos in comments of ocfs2. Signed-off-by: Coly Li <coyli@suse.de> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Check xattr block signatures properly.Joel Becker2008-11-101-0/+3
| | | | | | | | | | | | The xattr.c code is currently memcmp()ing naking buffer pointers. Create the OCFS2_IS_VALID_XATTR_BLOCK() macro to match its peers and use that. In addition, failed signature checks were returning -EFAULT, which is completely wrong. Return -EIO. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Switch over to JBD2.Joel Becker2008-10-131-1/+6
| | | | | | | | | | | | | | | | | | | | | | ocfs2 wants JBD2 for many reasons, not the least of which is that JBD is limiting our maximum filesystem size. It's a pretty trivial change. Most functions are just renamed. The only functional change is moving to Jan's inode-based ordered data mode. It's better, too. Because JBD2 reads and writes JBD journals, this is compatible with any existing filesystem. It can even interact with JBD-based ocfs2 as long as the journal is formated for JBD. We provide a compatibility option so that paranoid people can still use JBD for the time being. This will go away shortly. [ Moved call of ocfs2_begin_ordered_truncate() from ocfs2_delete_inode() to ocfs2_truncate_for_delete(). --Mark ] Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Add the 'inode64' mount option.Joel Becker2008-10-131-0/+1
| | | | | | | | | | | Now that ocfs2 limits inode numbers to 32bits, add a mount option to disable the limit. This parallels XFS. 64bit systems can handle the larger inode numbers. [ Added description of inode64 mount option in ocfs2.txt. --Mark ] Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Add incompatible flag for extended attributeTiger Yang2008-10-131-0/+7
| | | | | | | | | This patch adds the s_incompat flag for extended attribute support. This helps us ensure that older versions of Ocfs2 or ocfs2-tools will not be able to mount a volume with xattr support. Signed-off-by: Tiger Yang <tiger.yang@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Add extended attribute supportTiger Yang2008-10-131-0/+2
| | | | | | | | | | This patch implements storing extended attributes both in inode or a single external block. We only store EA's in-inode when blocksize > 512 or that inode block has free space for it. When an EA's value is larger than 80 bytes, we will store the value via b-tree outside inode or block. Signed-off-by: Tiger Yang <tiger.yang@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: reserve inline space for extended attributeTiger Yang2008-10-131-0/+1
| | | | | | | | | | Add the structures and helper functions we want for handling inline extended attributes. We also update the inline-data handlers so that they properly function in the event that we have both inline data and inline attributes sharing an inode block. Signed-off-by: Tiger Yang <tiger.yang@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: track local alloc state via debugfsMark Fasheh2008-10-131-0/+5
| | | | | | | | | | A per-mount debugfs file, "local_alloc" is created which when read will expose live state of the nodes local alloc file. Performance impact is minimal, only a bit of memory overhead per mount point. Still, the code is hidden behind CONFIG_OCFS2_FS_STATS. This feature will help us debug local alloc performance problems on a live system. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: throttle back local alloc when low on disk spaceMark Fasheh2008-10-131-4/+19
| | | | | | | | | | | | | | | | | | | | | | | Ocfs2's local allocator disables itself for the duration of a mount point when it has trouble allocating a large enough area from the primary bitmap. That can cause performance problems, especially for disks which were only temporarily full or fragmented. This patch allows for the allocator to shrink it's window first, before being disabled. Later, it can also be re-enabled so that any performance drop is minimized. To do this, we allow the value of osb->local_alloc_bits to be shrunk when needed. The default value is recorded in a mostly read-only variable so that we can re-initialize when required. Locking had to be updated so that we could protect changes to local_alloc_bits. Mostly this involves protecting various local alloc values with the osb spinlock. A new state is also added, OCFS2_LA_THROTTLED, which is used when the local allocator is has shrunk, but is not disabled. If the available space dips below 1 megabyte, the local alloc file is disabled. In either case, local alloc is re-enabled 30 seconds after the event, or when an appropriate amount of bits is seen in the primary bitmap. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Track local alloc bits internallyMark Fasheh2008-10-131-1/+9
| | | | | | | | | Do this instead of tracking absolute local alloc size. This avoids needless re-calculatiion of bits from bytes in localalloc.c. Additionally, the value is now in a more natural unit for internal file system bitmap work. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* [PATCH 2/2] ocfs2: Fix race between mount and recoverySunil Mushran2008-07-311-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | As the fs recovery is asynchronous, there is a small chance that another node can mount (and thus recover) the slot before the recovery thread gets to it. If this happens, the recovery thread will block indefinitely on the journal/slot lock as that lock will be held for the duration of the mount (by design) by the node assigned to that slot. The solution implemented is to keep track of the journal replays using a recovery generation in the journal inode, which will be incremented by the thread replaying that journal. The recovery thread, before attempting the blocking lock on the journal/slot lock, will compare the generation on disk with what it has cached and skip recovery if it does not match. This bug appears to have been inadvertently introduced during the mount/umount vote removal by mainline commit 34d024f84345807bf44163fac84e921513dde323. In the mount voting scheme, the messaging would indirectly indicate that the slot was being recovered. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* [PATCH 2/2] ocfs2: Instrument fs cluster locksSunil Mushran2008-07-141-0/+12
| | | | | | | | | | | This patch adds code to track the number of times the fs takes various cluster locks as well as the times associated with it. The information is made available to users via debugfs. This patch was originally written by Jan Kara <jack@suse.cz>. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Add inode stealing for ocfs2_reserve_new_inodeTao Ma2008-04-181-2/+32
| | | | | | | | | | Inode allocation is modified to look in other nodes allocators during extreme out of space situations. We retry our own slot when space is freed back to the global bitmap, or whenever we've allocated more than 1024 inodes from another slot. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Add the USERSPACE_STACK incompat bit.Joel Becker2008-04-181-0/+7
| | | | | | | | | | | | | | | | | | The filesystem gains the USERSPACE_STACK incomat bit and the s_cluster_info field on the superblock. When a userspace stack is in use, the name of the stack is stored on-disk for mount-time verification. The "cluster_stack" option is added to mount(2) processing. The mount process needs to pass the matching stack name. If the passed name and the on-disk name do not match, the mount is failed. When using the classic o2cb stack, the incompat bit is *not* set and no mount option is used other than the usual heartbeat=local. Thus, the filesystem is compatible with older tools. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Remove CANCELGRANT from the view of dlmglue.Joel Becker2008-04-181-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | o2dlm has the non-standard behavior of providing a cancel callback (unlock_ast) even when the cancel has failed (the locking operation succeeded without canceling). This is called CANCELGRANT after the status code sent to the callback. fs/dlm does not provide this callback, so dlmglue must be changed to live without it. o2dlm_unlock_ast_wrapper() in stackglue now ignores CANCELGRANT calls. Because dlmglue no longer sees CANCELGRANT, ocfs2_unlock_ast() no longer needs to check for it. ocfs2_locking_ast() must catch that a cancel was tried and clear the cancel state. Making these changes opens up a locking race. dlmglue uses the the OCFS2_LOCK_BUSY flag to ensure only one thread is calling the dlm at any one time. But dlmglue must unlock the lockres before calling into the dlm. In the small window of time between unlocking the lockres and calling the dlm, the downconvert thread can try to cancel the lock. The downconvert thread is checking the OCFS2_LOCK_BUSY flag - it doesn't know that ocfs2_dlm_lock() has not yet been called. Because ocfs2_dlm_lock() has not yet been called, the cancel operation will just be a no-op. There's nothing to cancel. With CANCELGRANT, dlmglue uses the CANCELGRANT callback to clear up the cancel state. When it comes around again, it will retry the cancel. Eventually, the first thread will have called into ocfs2_dlm_lock(), and either the lock or the cancel will succeed. The downconvert thread can then do its downconvert. Without CANCELGRANT, there is nothing to clean up the cancellation state. The downconvert thread does not know to retry its operations. More importantly, the original lock may be blocking on the other node that is trying to cancel us. With neither able to make progress, the ast is never called and the cancellation state is never cleaned up that way. dlmglue is deadlocked. The OCFS2_LOCK_PENDING flag is introduced to remedy this window. It is set at the same time OCFS2_LOCK_BUSY is. Thus, the downconvert thread can check whether the lock is cancelable. If not, it just loops around to try again. Once ocfs2_dlm_lock() is called, the thread then clears OCFS2_LOCK_PENDING and wakes the downconvert thread. Now, if the downconvert thread finds the lock BUSY, it can safely try to cancel it. Whether the cancel works or not, the state will be properly set and the lock processing can continue. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Move o2hb functionality into the stack glue.Joel Becker2008-04-181-4/+0
| | | | | | | | | | | | | | | | | The last bit of classic stack used directly in ocfs2 code is o2hb. Specifically, the check for heartbeat during mount and the call to ocfs2_hb_ctl during unmount. We create an extra API, ocfs2_cluster_hangup(), to encapsulate the call to ocfs2_hb_ctl. Other stacks will just leave hangup() empty. The check for heartbeat is moved into ocfs2_cluster_connect(). It will be matched by a similar check for other stacks. With this change, only stackglue.c includes cluster/ headers. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Abstract out node number queries.Joel Becker2008-04-181-1/+1
| | | | | | | | | | | | | | | | | ocfs2 asks the cluster stack for the local node's node number for two reasons; to fill the slot map and to print it. While the slot map isn't necessary for userspace cluster stacks, the printing is very nice for debugging. Thus we add ocfs2_cluster_this_node() as a generic API to get this value. It is anticipated that the slot map will not be used under a userspace cluster stack, so validity checks of the node num only need to exist in the slot map code. Otherwise, it just gets used and printed as an opaque value. [ Fixed up some "int" versus "unsigned int" issues and made osb->node_num truly opaque. --Mark ] Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Introduce the new ocfs2_cluster_connect/disconnect() API.Joel Becker2008-04-181-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | This step introduces a cluster stack agnostic API for initializing and exiting. fs/ocfs2/dlmglue.c no longer uses o2cb/o2dlm knowledge to connect to the stack. It is all handled in stackglue.c. heartbeat.c no longer needs to know how it gets called. ocfs2_do_node_down() is now a clean recovery trigger. The big gotcha is the ordering of initializations and de-initializations done underneath ocfs2_cluster_connect(). ocfs2_dlm_init() used to do all o2dlm initialization in one block. Thus, the o2dlm functionality of ocfs2_cluster_connect() is very straightforward. ocfs2_dlm_shutdown(), however, did a few things between de-registration of the eviction callback and actually shutting down the domain. Now de-registration and shutdown of the domain are wrapped within the single ocfs2_cluster_disconnect() call. I've checked the code paths to make sure we can safely tear down things in ocfs2_dlm_shutdown() before calling ocfs2_cluster_disconnect(). The filesystem has already set itself to ignore the callback. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Create the lock status block union.Joel Becker2008-04-181-2/+3
| | | | | | | | | | | | Wrap the lock status block (lksb) in a union. Later we will add a union element for the fs/dlm lksb. Create accessors for the status and lvb fields. Other than a debugging function, dlmglue.c does not directly reference the o2dlm locking path anymore. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: New slot map formatJoel Becker2008-04-181-0/+7
| | | | | | | | | | | | | | | The old slot map had a few limitations: - It was limited to one block, so the maximum slot count was 255. - Each slot was signed 16bits, limiting node numbers to INT16_MAX. - An empty slot was marked by the magic 0xFFFF (-1). The new slot map format provides 32bit node numbers (UINT32_MAX), a separate space to mark a slot in use, and extra room to grow. The slot map is now bounded by i_size, not a block. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: De-magic the in-memory slot map.Joel Becker2008-04-181-3/+3
| | | | | | | | | | | | | | | The in-memory slot map uses the same magic as the on-disk one. There is a special value to mark a slot as invalid. It relies on the size of certain types and so on. Write a new in-memory map that keeps validity as a separate field. Outside of the I/O functions, OCFS2_INVALID_SLOT now means what it is supposed to. It also is no longer tied to the type size. This also means that only the I/O functions refer to 16bit quantities. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Change the recovery map to an array of node numbers.Joel Becker2008-04-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | The old recovery map was a bitmap of node numbers. This was sufficient for the maximum node number of 254. Going forward, we want node numbers to be UINT32. Thus, we need a new recovery map. Note that we can't keep track of slots here. We must write down the node number to recovery *before* we get the locks needed to convert a node number into a slot number. The recovery map is now an array of unsigned ints, max_slots in size. It moves to journal.c with the rest of recovery. Because it needs to be initialized, we move all of recovery initialization into a new function, ocfs2_recovery_init(). This actually cleans up ocfs2_initialize_super() a little as well. Following on, recovery cleaup becomes part of ocfs2_recovery_exit(). A number of node map functions are rendered obsolete and are removed. Finally, waiting on recovery is wrapped in a function rather than naked checks on the recovery_event. This is a cleanup from Mark. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Make ocfs2_slot_info private.Joel Becker2008-04-181-0/+1
| | | | | | | | | Just use osb_lock around the ocfs2_slot_info data. This allows us to take the ocfs2_slot_info structure private in slot_info.c. All access is now via accessors. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* byteorder: move le32_add_cpu & friends from OCFS2 to coreMarcin Slusarz2008-02-081-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patchset moves le*_add_cpu and be*_add_cpu functions from OCFS2 to core header (1st), converts ext3 filesystem to this API (2nd) and replaces XFS different named functions with new ones (3rd). There are many places where these functions will be useful. Just look at: grep -r 'cpu_to_[ble12346]*([ble12346]*_to_cpu.*[-+]' linux-src/ Patch for ext3 is an example how conversions will probably look like. This patch: - move inline functions which add native byte order variable to little/big endian variable to core header * le16_add_cpu(__le16 *var, u16 val) * le32_add_cpu(__le32 *var, u32 val) * le64_add_cpu(__le64 *var, u64 val) * be32_add_cpu(__be32 *var, u32 val) - add for completeness: * be16_add_cpu(__be16 *var, u16 val) * be64_add_cpu(__be64 *var, u64 val) Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: Timothy Shimmin <tes@sgi.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ocfs2: Negotiate locking protocol versions.Joel Becker2008-02-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | Currently, when ocfs2 nodes connect via TCP, they advertise their compatibility level. If the versions do not match, two nodes cannot speak to each other and they disconnect. As a result, this provides no forward or backwards compatibility. This patch implements a simple protocol negotiation at the dlm level by introducing a major/minor version number scheme for entities that communicate. Specifically, o2dlm has a major/minor version for interaction with o2dlm on other nodes, and ocfs2 itself has a major/minor version for interacting with the filesystem on other nodes. This will allow rolling upgrades of ocfs2 clusters when changes to the locking or network protocols can be done in a backwards compatible manner. In those cases, only the minor number is changed and the negotatied protocol minor is returned from dlm join. In the far less likely event that a required protocol change makes backwards compatibility impossible, we simply bump the major number. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: document access rules for blocked_lock_listMark Fasheh2008-01-251-0/+6
| | | | | | | | | ocfs2_super->blocked_lock_list and ocfs2_super->blocked_lock_count have some usage restrictions which aren't immediately obvious to anyone reading the code. It's a good idea to document this so that we avoid making costly mistakes in the future. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* [PATCH 2/2] ocfs2: cluster aware flock()Mark Fasheh2008-01-251-0/+1
| | | | | | | | Hook up ocfs2_flock(), using the new flock lock type in dlmglue.c. A new mount option, "localflocks" is added so that users can revert to old functionality as need be. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* [PATCH 1/2] ocfs2: add flock lock typeMark Fasheh2008-01-251-0/+1
| | | | | | | | | | | | | | | | | | This adds a new dlmglue lock type which is intended to back flock() requests. Since these locks are driven from userspace, usage rules are much more liberal than the typical Ocfs2 internal cluster lock. As a result, we can't make use of most dlmglue features - lock caching and lock level optimizations in particular. Additionally, userspace is free to deadlock itself, so we have to deal with that in the same way as the rest of the kernel - by allowing a signal to abort a lock request. In order to keep ocfs2_cluster_lock() complexity down, ocfs2_file_lock() does it's own dlm coordination. We still use the same helper functions though, so duplicated code is kept to a minimum. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Local alloc window size changeable via mount optionSunil Mushran2008-01-251-0/+1
| | | | | | | | | | | | | | Local alloc is a performance optimization in ocfs2 in which a node takes a window of bits from the global bitmap and then uses that for all small local allocations. This window size is fixed to 8MB currently. This patch allows users to specify the window size in MB including disabling it by passing in 0. If the number specified is too large, the fs will use the default value of 8MB. mount -o localalloc=X /dev/sdX /mntpoint Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Support commit= mount optionMark Fasheh2008-01-251-0/+1
| | | | | | | | | Mostly taken from ext3. This allows the user to set the jbd commit interval, in seconds. The default of 5 seconds stays the same, but now users can easily increase the commit interval. Typically, this would be increased in order to benefit performance at the expense of data-safety. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Remove mount/unmount votesMark Fasheh2008-01-251-20/+5
| | | | | | | | | | | | The node maps that are set/unset by these votes are no longer relevant, thus we can remove the mount and umount votes. Since those are the last two remaining votes, we can also remove the entire vote infrastructure. The vote thread has been renamed to the downconvert thread, and the small amount of functionality related to managing it has been moved into fs/ocfs2/dlmglue.c. All references to votes have been removed or updated. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
OpenPOWER on IntegriCloud