summaryrefslogtreecommitdiffstats
path: root/fs/ocfs2/localalloc.c
Commit message (Collapse)AuthorAgeFilesLines
* ocfs2: Remove DISK_ALLOC from masklog.Tao Ma2011-02-221-1/+0
| | | | | | | | Since all 4 files, localalloc.c, suballoc.c, alloc.c and resize.c, which use DISK_ALLOC are changed to trace events, Remove masklog DISK_ALLOC totally. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
* ocfs2: Remove mlog(0) from fs/ocfs2/localalloc.cTao Ma2011-02-221-34/+23
| | | | | | | | | | | | | | This is the 2nd step to remove the debug info of DISK_ALLOC. So this patch removes all mlog(0,...) from localalloc.c and adds the corresponding tracepoints. Different mlogs have different solutions. 1. Some are replaced with trace event directly. 2. Some are replaced while some new parameters are added. 3. Some are combined into one trace events. 4. Some redundant mlogs are removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
* ocfs2: Remove EXIT from masklog.Tao Ma2011-03-071-15/+20
| | | | | | | | | | | | | | | | | | mlog_exit is used to record the exit status of a function. But because it is added in so many functions, if we enable it, the system logs get filled up quickly and cause too much I/O. So actually no one can open it for a production system or even for a test. This patch just try to remove it or change it. So: 1. if all the error paths already use mlog_errno, it is just removed. Otherwise, it will be replaced by mlog_errno. 2. if it is used to print some return value, it is replaced with mlog(0,...). mlog_exit_ptr is changed to mlog(0. All those mlog(0,...) will be replaced with trace events later. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
* ocfs2: Remove ENTRY from masklog.Tao Ma2011-02-211-21/+5
| | | | | | | | | | | | | | ENTRY is used to record the entry of a function. But because it is added in so many functions, if we enable it, the system logs get filled up quickly and cause too much I/O. So actually no one can open it for a production system or even for a test. So for mlog_entry_void, we just remove it. for mlog_entry(...), we replace it with mlog(0,...), and they will be replace by trace event later. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
* ocfs2: Limit default local alloc size within bitmap range.Tao Ma2010-06-151-0/+7
| | | | | | | | | | | | | | | | In commit 6b82021b9e91cd689fdffadbcdb9a42597bbe764, we increase our local alloc size and calculate how much megabytes we can get according to group size and volume size. But we also need to check the maximum bits a local alloc block bitmap can have. With a bs=512, cs=32K, local volume with 160G, it calculate 96MB while the maximum local alloc size is only 76M. So the bitmap will overflow and corrupt the system truncate log file. See bug http://oss.oracle.com/bugzilla/show_bug.cgi?id=1262 Signed-off-by: Tao Ma <tao.ma@oracle.com> Acked-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: ocfs2_group_bitmap_size has to handle old volume.Tao Ma2010-04-131-1/+1
| | | | | | | | ocfs2_group_bitmap_size has to handle the case when the volume don't have discontiguous block group support. So pass the feature_incompat in and check it. Signed-off-by: Tao Ma <tao.ma@oracle.com>
* ocfs2: ocfs2_claim_*() don't need an ocfs2_super argument.Joel Becker2010-05-061-2/+2
| | | | | | | They all take an ocfs2_alloc_context, which has the allocation inode. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Tao Ma <tao.ma@oracle.com>
* ocfs2: Define data structures for discontiguous block groups.Joel Becker2010-04-131-1/+1
| | | | | | | | Defines the OCFS2_FEATURE_INCOMPAT_DISCONTIG_BG feature bit and modifies struct ocfs2_group_desc for the feature. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Tao Ma <tao.ma@oracle.com>
* ocfs2/trivial: Code cleanup for allocation reservation.Tao Ma2010-05-051-5/+2
| | | | | | | | | | Two tiny cleanup for allocation reservation. 1. Remove some extra codes in ocfs2_local_alloc_find_clear_bits. 2. Remove an unuseful variables in ocfs2_find_resv_lhs. Signed-off-by: Tao Ma <tao.ma@oracle.com> Acked-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: increase the default size of local alloc windowsMark Fasheh2010-05-051-2/+112
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I have observed that the current size of 8M gives us pretty poor fragmentation on multi-threaded workloads which do lots of writes. Generally, I can increase the size of local alloc windows and observe a marked decrease in fragmentation, even up and beyond window sizes of 512 megabytes. This makes sense for a couple reasons - larger local alloc means more room for reservation windows. On multi-node workloads the larger local alloc helps as well because we don't have to do window slides as often. Also, I removed the OCFS2_DEFAULT_LOCAL_ALLOC_SIZE constant as it is no longer used and the comment above it was out of date. To test fragmentation, I used a workload which launched 4 threads that did 4k writes into a series of about 140 alternating files. With resv_level=2, and a 4k/4k file system I observed the following average fragmentation for various localalloc= parameters: localalloc= avg. fragmentation 8 48 32 16 64 10 120 7 On larger cluster sizes, the difference is more dramatic. The new default size top out at 256M, which we'll only get for cluster sizes of 32K and above. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: clean up localalloc mount option size parsingMark Fasheh2010-05-051-0/+28
| | | | | | | | | | | | | | | | | This patch pulls the local alloc sizing code into localalloc.c and provides a callout to it from ocfs2_fill_super(). Behavior is essentially unchanged except that I correctly calculate the maximum local alloc size. The old code in ocfs2_parse_options() calculated the max size as: ocfs2_local_alloc_size(sb) * 8 which is correct, in bits. Unfortunately though the option passed in is in megabytes. Ultimately, this bug made no real difference - the shrink code would catch a too-large size and bring it down to something reasonable. Still, it's less than efficient as-is. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: remove ocfs2_local_alloc_in_range()Mark Fasheh2010-05-051-51/+0
| | | | | | | | Inodes are always allocated from the global bitmap now so we don't need this any more. Also, the existing implementation bounces reservations around needlessly. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: allocation reservationsMark Fasheh2010-05-051-11/+53
| | | | | | | | | | | | | | | | | | | | This patch improves Ocfs2 allocation policy by allowing an inode to reserve a portion of the local alloc bitmap for itself. The reserved portion (allocation window) is advisory in that other allocation windows might steal it if the local alloc bitmap becomes full. Otherwise, the reservations are honored and guaranteed to be free. When the local alloc window is moved to a different portion of the bitmap, existing reservations are discarded. Reservation windows are represented internally by a red-black tree. Within that tree, each node represents the reservation window of one inode. An LRU of active reservations is also maintained. When new data is written, we allocate it from the inodes window. When all bits in a window are exhausted, we allocate a new one as close to the previous one as possible. Should we not find free space, an existing reservation is pulled off the LRU and cannibalized. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Make ocfs2_journal_dirty() void.Joel Becker2010-05-051-20/+3
| | | | | | | | | | | | | | | | | | | jbd[2]_journal_dirty_metadata() only returns 0. It's been returning 0 since before the kernel moved to git. There is no point in checking this error. ocfs2_journal_dirty() has been faithfully returning the status since the beginning. All over ocfs2, we have blocks of code checking this can't fail status. In the past few years, we've tried to avoid adding these checks, because they are pointless. But anyone who looks at our code assumes they are needed. Finally, ocfs2_journal_dirty() is made a void function. All error checking is removed from other files. We'll BUG_ON() the status of jbd2_journal_dirty_metadata() just in case they change it someday. They won't. Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: Clear undo bits when local alloc is freedMark Fasheh2010-03-231-2/+4
| | | | | | | | | | | | | | When the local alloc file changes windows, unused bits are freed back to the global bitmap. By defnition, those bits can not be in use by any file. Also, the local alloc will never have been able to allocate those bits if they were part of a previous truncate. Therefore it makes sense that we should clear unused local alloc bits in the undo buffer so that they can be used immediatly. [ Modified to call it ocfs2_release_clusters() -- Joel ] Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: Always try for maximum bits with new local alloc windowsMark Fasheh2010-03-181-2/+2
| | | | | | | | | | | | | | | What we were doing before was to ask for the current window size as the maximum allocation. This had the effect of limiting the amount of allocation we could get for the local alloc during times when the window size was shrunk due to fragmentation. In some cases, that could actually *increase* fragmentation by artificially limiting the number of bits we can accept. So while we still want to ask for a minimum number of bits equal to window size, there is no reason why we should limit the number of bits the local alloc should accept. Hence always allow the maximum number of local alloc bits. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: add extent block stealing for ocfs2 v5Tiger Yang2010-02-261-1/+1
| | | | | | | | | | | This patch add extent block (metadata) stealing mechanism for extent allocation. This mechanism is same as the inode stealing. if no room in slot specific extent_alloc, we will try to allocate extent block from the next slot. Signed-off-by: Tiger Yang <tiger.yang@oracle.com> Acked-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: Pass struct ocfs2_caching_info to the journal functions.Joel Becker2009-09-041-4/+6
| | | | | | | | | | | | | The next step in divorcing metadata I/O management from struct inode is to pass struct ocfs2_caching_info to the journal functions. Thus the journal locks a metadata cache with the cache io_lock function. It also can compare ci_last_trans and ci_created_trans directly. This is a large patch because of all the places we change ocfs2_journal_access..(handle, inode, ...) to ocfs2_journal_access..(handle, INODE_CACHE(inode), ...). Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: Take the inode out of the metadata read/write paths.Joel Becker2009-09-041-1/+1
| | | | | | | | | We are really passing the inode into the ocfs2_read/write_blocks() functions to get at the metadata cache. This commit passes the cache directly into the metadata block functions, divorcing them from the inode. Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: Remove debugfs file local_alloc_statsSunil Mushran2009-04-031-86/+0
| | | | | | | | This patch removes the debugfs file local_alloc_stats as that information is now included in the fs_state debugfs file. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Use metadata-specific ocfs2_journal_access_*() functions.Joel Becker2009-01-051-8/+10
| | | | | | | | | | | | | | | | | | | | | | | | The per-metadata-type ocfs2_journal_access_*() functions hook up jbd2 commit triggers and allow us to compute metadata ecc right before the buffers are written out. This commit provides ecc for inodes, extent blocks, group descriptors, and quota blocks. It is not safe to use extened attributes and metaecc at the same time yet. The ocfs2_extent_tree and ocfs2_path abstractions in alloc.c both hide the type of block at their root. Before, it didn't matter, but now the root block must use the appropriate ocfs2_journal_access_*() function. To keep this abstract, the structures now have a pointer to the matching journal_access function and a wrapper call to call it. A few places use naked ocfs2_write_block() calls instead of adding the blocks to the journal. We make sure to calculate their checksum and ecc before the write. Since we pass around the journal_access functions. Let's typedef them in ocfs2.h. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Wrap inode block reads in a dedicated function.Joel Becker2009-01-051-4/+4
| | | | | | | | | | | | | | | | | | | | | | | The ocfs2 code currently reads inodes off disk with a simple ocfs2_read_block() call. Each place that does this has a different set of sanity checks it performs. Some check only the signature. A couple validate the block number (the block read vs di->i_blkno). A couple others check for VALID_FL. Only one place validates i_fs_generation. A couple check nothing. Even when an error is found, they don't all do the same thing. We wrap inode reading into ocfs2_read_inode_block(). This will validate all the above fields, going readonly if they are invalid (they never should be). ocfs2_read_inode_block_full() is provided for the places that want to pass read_block flags. Every caller is passing a struct inode with a valid ip_blkno, so we don't need a separate blkno argument either. We will remove the validation checks from the rest of the code in a later commit, as they are no longer necessary. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Make cached block reads the common case.Joel Becker2008-10-141-2/+2
| | | | | | | | | | | ocfs2_read_blocks() currently requires the CACHED flag for cached I/O. However, that's the common case. Let's flip it around and provide an IGNORE_CACHE flag for the special users. This has the added benefit of cleaning up the code some (ignore_cache takes on its special meaning earlier in the loop). Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Simplify ocfs2_read_block()Joel Becker2008-10-141-4/+4
| | | | | | | | | | More than 30 callers of ocfs2_read_block() pass exactly OCFS2_BH_CACHED. Only six pass a different flag set. Rather than have every caller care, let's make ocfs2_read_block() take no flags and always do a cached read. The remaining six places can call ocfs2_read_blocks() directly. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Require an inode for ocfs2_read_block(s)().Joel Becker2008-10-141-4/+4
| | | | | | | | | | Now that synchronous readers are using ocfs2_read_blocks_sync(), all callers of ocfs2_read_blocks() are passing an inode. Use it unconditionally. Since it's there, we don't need to pass the ocfs2_super either. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Don't check for NULL before brelse()Mark Fasheh2008-10-131-10/+5
| | | | | | This is pointless as brelse() already does the check. Signed-off-by: Mark Fasheh
* ocfs2: make la_debug_mutex staticMark Fasheh2008-10-131-2/+1
| | | | | | It can also be moved into ocfs2_la_debug_read(). Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Limit inode allocation to 32bits.Joel Becker2008-10-131-0/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | ocfs2 inode numbers are block numbers. For any filesystem with less than 2^32 blocks, this is not a problem. However, when ocfs2 starts using JDB2, it will be able to support filesystems with more than 2^32 blocks. This would result in inode numbers higher than 2^32. The problem is that stat(2) can't handle those numbers on 32bit machines. The simple solution is to have ocfs2 allocate all inodes below that boundary. The suballoc code is changed to honor an optional block limit. Only the inode suballocator sets that limit - all other allocations stay unlimited. The biggest trick is to grow the inode suballocator beneath that limit. There's no point in allocating block groups that are above the limit, then rejecting their elements later on. We want to prevent the inode allocator from ever having block groups above the limit. This involves a little gyration with the local alloc code. If the local alloc window is above the limit, it signals the caller to try the global bitmap but does not disable the local alloc file (which can be used for other allocations). [ Minor cleanup - removed an ML_NOTICE comment. --Mark ] Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: track local alloc state via debugfsMark Fasheh2008-10-131-0/+87
| | | | | | | | | | A per-mount debugfs file, "local_alloc" is created which when read will expose live state of the nodes local alloc file. Performance impact is minimal, only a bit of memory overhead per mount point. Still, the code is hidden behind CONFIG_OCFS2_FS_STATS. This feature will help us debug local alloc performance problems on a live system. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: throttle back local alloc when low on disk spaceMark Fasheh2008-10-131-12/+186
| | | | | | | | | | | | | | | | | | | | | | | Ocfs2's local allocator disables itself for the duration of a mount point when it has trouble allocating a large enough area from the primary bitmap. That can cause performance problems, especially for disks which were only temporarily full or fragmented. This patch allows for the allocator to shrink it's window first, before being disabled. Later, it can also be re-enabled so that any performance drop is minimized. To do this, we allow the value of osb->local_alloc_bits to be shrunk when needed. The default value is recorded in a mostly read-only variable so that we can re-initialize when required. Locking had to be updated so that we could protect changes to local_alloc_bits. Mostly this involves protecting various local alloc values with the osb spinlock. A new state is also added, OCFS2_LA_THROTTLED, which is used when the local allocator is has shrunk, but is not disabled. If the available space dips below 1 megabyte, the local alloc file is disabled. In either case, local alloc is re-enabled 30 seconds after the event, or when an appropriate amount of bits is seen in the primary bitmap. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Track local alloc bits internallyMark Fasheh2008-10-131-22/+12
| | | | | | | | | Do this instead of tracking absolute local alloc size. This avoids needless re-calculatiion of bits from bytes in localalloc.c. Additionally, the value is now in a more natural unit for internal file system bitmap work. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Fix CONFIG_OCFS2_DEBUG_FS #ifdefsJoel Becker2008-07-141-1/+1
| | | | | | | | A couple places use OCFS2_DEBUG_FS where they really mean CONFIG_OCFS2_DEBUG_FS. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: Use GFP_NOFS in kmalloc during localalloc window moveSunil Mushran2008-04-301-2/+2
| | | | | | | | | | | | | | | kmalloc() during a localalloc window move can trigger the mm to prune the dcache which inturn can trigger the fs to delete an inode causing it start a recursive transaction. The fix also makes the change in kmalloc during localalloc shutdown just to be safe. Fixes oss bugzilla#901 http://oss.oracle.com/bugzilla/show_bug.cgi?id=901 Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Add inode stealing for ocfs2_reserve_new_inodeTao Ma2008-04-181-0/+2
| | | | | | | | | | Inode allocation is modified to look in other nodes allocators during extreme out of space situations. We retry our own slot when space is freed back to the global bitmap, or whenever we've allocated more than 1024 inodes from another slot. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Add ac_alloc_slot in ocfs2_alloc_contextTao Ma2008-04-181-0/+2
| | | | | | | | | | | | In inode stealing, we no longer restrict the allocation to happen in the local node. So it is neccessary for us to add a new member in ocfs2_alloc_context to indicate which slot we are using for allocation. We also modify the process of local alloc so that this member can be used there also. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* [PATCH] ocfs2: le*_add_cpu conversionMarcin Slusarz2008-03-031-2/+1
| | | | | | | | | | | | replace all: little_endian_variable = cpu_to_leX(leX_to_cpu(little_endian_variable) + expression_in_cpu_byteorder); with: leX_add_cpu(&little_endian_variable, expression_in_cpu_byteorder); generated with semantic patch Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Enable localalloc for local mountsSunil Mushran2008-03-031-3/+0
| | | | | | | | | Commit 2fbe8d1ebe004425b4f7b8bba345623d2280be82 disabled localalloc for local mounts. This caused issues as ocfs2 uses localalloc to provide write locality. This patch enables localalloc for local mounts. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Local alloc window size changeable via mount optionSunil Mushran2008-01-251-12/+30
| | | | | | | | | | | | | | Local alloc is a performance optimization in ocfs2 in which a node takes a window of bits from the global bitmap and then uses that for all small local allocations. This window size is fixed to 8MB currently. This patch allows users to specify the window size in MB including disabling it by passing in 0. If the number specified is too large, the fs will use the default value of 8MB. mount -o localalloc=X /dev/sdX /mntpoint Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Rename ocfs2_meta_[un]lockMark Fasheh2008-01-251-4/+4
| | | | | | | Call this the "inode_lock" now, since it covers both data and meta data. This patch makes no functional changes. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* [PATCH] ocfs2: Remove expensive bitmap scanningJan Kara2007-11-271-2/+3
| | | | | | | | | | Enable expensive bitmap scanning only if DEBUG option is enabled. The bitmap scanning quite loads the CPU and on my machine the write throughput of dd if=/dev/zero of=/ocfs2/file bs=1M count=500 conv=sync improves from 37 MB/s to 45.4 MB/s in local mode... Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Unlock mutex in local alloc failure caseSunil Mushran2007-10-031-1/+3
| | | | | | | | The fs was not unlocking the local alloc inode mutex in the code path in which it failed to find a window of free bits in the global bitmap. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Allow smaller allocations during large writesMark Fasheh2007-09-201-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | The ocfs2 write code loops through a page much like the block code, except that ocfs2 allocation units can be any size, including larger than page size. Typically it's equal to or larger than page size - most kernels run 4k pages, the minimum ocfs2 allocation (cluster) size. Some changes introduced during 2.6.23 changed the way writes to pages are handled, and inadvertantly broke support for > 4k page size. Instead of just writing one cluster at a time, we now handle the whole page in one pass. This means that multiple (small) seperate allocations might happen in the same pass. The allocation code howver typically optimizes by getting the maximum which was reserved. This triggered a BUG_ON in the extend code where it'd ask for a single bit (for one part of a > 4k page) and get back more than it asked for. Fix this by providing a variant of the high level allocation function which allows the caller to specify a maximum. The traditional function remains and just calls the new one with a maximum determined from the initial reservation. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: fix inode leakMark Fasheh2007-05-251-3/+4
| | | | | | | | | We weren't cleaning up our inode reference on error in ocfs2_reserve_local_alloc_bits(). Add a check for error return and iput() if need be. Move the code to set the alloc context inode info to the end of the function so we don't have any possibility of passing back a bad pointer. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* [PATCH] Fix numerous kcalloc() calls, convert to kzalloc()Robert P. J. Day2006-12-131-1/+1
| | | | | | | | | | | | | | | | | | | All kcalloc() calls of the form "kcalloc(1,...)" are converted to the equivalent kzalloc() calls, and a few kcalloc() calls with the incorrect ordering of the first two arguments are fixed. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Adam Belay <ambx1@neo.rr.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* ocfs2: Remove struct ocfs2_journal_handle in favor of handle_tMark Fasheh2006-12-011-9/+9
| | | | | | | | | | This is mostly a search and replace as ocfs2_journal_handle is now no more than a container for a handle_t pointer. ocfs2_commit_trans() becomes very straight forward, and we remove some out of date comments / code. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: remove handle argument to ocfs2_start_trans()Mark Fasheh2006-12-011-3/+3
| | | | | | | | | All callers either pass in NULL directly, or a local variable that is already set to NULL. The internals of ocfs2_start_trans() get a nice cleanup as a result. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: pass ocfs2_super * into ocfs2_commit_trans()Mark Fasheh2006-12-011-3/+3
| | | | | | This sets us up to remove handle->journal. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: remove unused handle argument from ocfs2_meta_lock_full()Mark Fasheh2006-12-011-2/+2
| | | | | | Now that this is unused and all callers pass NULL, we can safely remove it. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: don't use handle for locking in allocation functionsMark Fasheh2006-12-011-20/+6
| | | | | | | | | Instead we record our state on the allocation context structure which all callers already know about and lifetime correctly. This means the reservation functions don't need a handle passed in any more, and we can also take it off the alloc context. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: don't pass handle to ocfs2_meta_lock() in localalloc.cMark Fasheh2006-12-011-44/+40
| | | | | | Take and drop the locks directly. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
OpenPOWER on IntegriCloud