summaryrefslogtreecommitdiffstats
path: root/fs/ext4/balloc.c
Commit message (Collapse)AuthorAgeFilesLines
* ext4: open-code ext4_mb_update_group_infoEric Sandeen2009-08-171-1/+1
| | | | | | | | | | | | | | ext4_mb_update_group_info is only called in one place, and it's extremely simple. There's no reason to have it in a separate function in a separate file as far as I can tell, it just obfuscates what's really going on. Perhaps it was intended to keep the grp->bb_* manipulation local to mballoc.c but we're already accessing other grp-> fields in balloc.c directly so this seems ok. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Convert ext4_lock_group to use sb_bgl_lockAneesh Kumar K.V2009-05-021-6/+6
| | | | | | | | | | | We have sb_bgl_lock() and ext4_group_info.bb_state bit spinlock to protech group information. The later is only used within mballoc code. Consolidate them to use sb_bgl_lock(). This makes the mballoc.c code much simpler and also avoid confusion with two locks protecting same info. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Move fs/ext4/group.h into ext4.hTheodore Ts'o2009-05-011-1/+0
| | | | | | | Move the function prototypes in group.h into ext4.h so they are all defined in one place. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Avoid races caused by on-line resizing and SMP memory reorderingTheodore Ts'o2009-05-011-8/+7
| | | | | | | | | | | | | | | | | | | | | Ext4's on-line resizing adds a new block group and then, only at the last step adjusts s_groups_count. However, it's possible on SMP systems that another CPU could see the updated the s_group_count and not see the newly initialized data structures for the just-added block group. For this reason, it's important to insert a SMP read barrier after reading s_groups_count and before reading any (for example) the new block group descriptors allowed by the increased value of s_groups_count. Unfortunately, we rather blatently violate this locking protocol documented in fs/ext4/resize.c. Fortunately, (1) on-line resizes happen relatively rarely, and (2) it seems rare that the filesystem code will immediately try to use just-added block group before any memory ordering issues resolve themselves. So apparently problems here are relatively hard to hit, since ext3 has been vulnerable to the same issue for years with no one apparently complaining. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Use atomic_t's in struct flex_groupsTheodore Ts'o2009-03-041-3/+2
| | | | | | | | | Reduce pressure on the sb_bgl_lock family of locks by using atomic_t's to track the number of free blocks and inodes in each flex_group. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: remove call to ext4_group_desc() in ext4_group_used_meta_blocks()Theodore Ts'o2009-02-061-6/+3
| | | | | | | | | | | | | | | The static function ext4_group_used_meta_blocks() only has one caller, who already has access to the block group's group descriptor. So it's better to have ext4_init_block_bitmap() pass the group descriptor to ext4_group_used_meta_blocks(), so it doesn't need to call ext4_group_desc(). Previously this function did not check if ext4_group_desc() returned NULL due to an error, potentially causing a kernel OOPS report. This avoids the issue entirely. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Use lowercase names of quota functionsJan Kara2009-03-261-1/+1
| | | | | | | | Use lowercase names of quota functions instead of old uppercase ones. Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Mingming Cao <cmm@us.ibm.com> CC: linux-ext4@vger.kernel.org
* ext4: don't call jbd2_journal_force_commit_nested without journalEric Sandeen2009-02-261-1/+3
| | | | | | | | | | | Running without a journal, I oopsed when I ran out of space, because we called jbd2_journal_force_commit_nested() from ext4_should_retry_alloc() without a journal. This should take care of it, I think. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Fix building with EXT4FS_DEBUGThadeu Lima de Souza Cascardo2009-01-261-3/+3
| | | | | | | | | | | | | | | | When bg_free_blocks_count was renamed to bg_free_blocks_count_lo in 560671a0, its uses under EXT4FS_DEBUG were not changed to the helper ext4_free_blks_count. Another commit, 498e5f24, also did not change everything needed under EXT4FS_DEBUG, thus making it spill some warnings related to printing format. This commit fixes both issues and makes ext4 build again when EXT4FS_DEBUG is enabled. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Use new buffer_head flag to check uninit group bitmaps initializationAneesh Kumar K.V2009-01-051-2/+23
| | | | | | | | | | | | | For uninit block group, the on-disk bitmap is not initialized. That implies we cannot depend on the uptodate flag on the bitmap buffer_head to find bitmap validity. Use a new buffer_head flag which would be set after we properly initialize the bitmap. This also prevents (re-)initializing the uninit group bitmap every time we call ext4_read_block_bitmap(). Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
* ext4: code cleanupAneesh Kumar K.V2009-01-031-1/+1
| | | | | | | | Rename some variables. We also unlock locks in the reverse order we acquired as a part of cleanup. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Use high 16 bits of the block group descriptor's free counts fieldsAneesh Kumar K.V2009-01-051-6/+7
| | | | | | | | | Rename the lower bits with suffix _lo and add helper to access the values. Also rename bg_itable_unused_hi to bg_pad as in e2fsprogs. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Use EXT4_GROUP_INFO_NEED_INIT_BIT during resizeAneesh Kumar K.V2009-01-051-8/+13
| | | | | | | | | | | | | | | The new groups added during resize are flagged as need_init group. Make sure we properly initialize these groups. When we have block size < page size and we are adding new groups the page may still be marked uptodate even though we haven't initialized the group. While forcing the init of buddy cache we need to make sure other groups part of the same page of buddy cache is not using the cache. group_info->alloc_sem is added to ensure the same. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> cc: stable@kernel.org
* ext4: Add blocks added during resize to bitmapAneesh Kumar K.V2009-01-051-106/+30
| | | | | | | | | | | | | With this change new blocks added during resize are marked as free in the block bitmap and the group is flagged with EXT4_GROUP_INFO_NEED_INIT_BIT flag. This makes sure when mballoc tries to allocate blocks from the new group we would reload the buddy information using the bitmap present in the disk. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
* ext4: Change unsigned long to unsigned intTheodore Ts'o2008-11-051-7/+7
| | | | | | | | | | | Convert the unsigned longs that are most responsible for bloating the stack usage on 64-bit systems. Nearly all places in the ext3/4 code which uses "unsigned long" is probably a bug, since on 32-bit systems a ulong a 32-bits, which means we are wasting stack space on 64-bit systems. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Make ext4_group_t be an unsigned intTheodore Ts'o2009-01-051-5/+5
| | | | | | | | Nearly all places in the ext3/4 code which uses "unsigned long" is probably a bug, since on 32-bit systems a ulong a 32-bits, which means we are wasting stack space on 64-bit systems. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: remove extraneous newlines from calls to ext4_error() and ext4_warning()Theodore Ts'o2009-01-051-1/+1
| | | | | | | | | This removes annoying blank syslog entries emitted by ext4_error() or ext4_warning(), since these functions add their own newline. Signed-off-by: Nick Warne <nick@ukfsn.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Allow ext4 to run without a journalFrank Mayhar2009-01-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A few weeks ago I posted a patch for discussion that allowed ext4 to run without a journal. Since that time I've integrated the excellent comments from Andreas and fixed several serious bugs. We're currently running with this patch and generating some performance numbers against both ext2 (with backported reservations code) and ext4 with and without a journal. It just so happens that running without a journal is slightly faster for most everything. We did iozone -T -t 4 s 2g -r 256k -T -I -i0 -i1 -i2 which creates 4 threads, each of which create and do reads and writes on a 2G file, with a buffer size of 256K, using O_DIRECT for all file opens to bypass the page cache. Results: ext2 ext4, default ext4, no journal initial writes 13.0 MB/s 15.4 MB/s 15.7 MB/s rewrites 13.1 MB/s 15.6 MB/s 15.9 MB/s reads 15.2 MB/s 16.9 MB/s 17.2 MB/s re-reads 15.3 MB/s 16.9 MB/s 17.2 MB/s random readers 5.6 MB/s 5.6 MB/s 5.7 MB/s random writers 5.1 MB/s 5.3 MB/s 5.4 MB/s So it seems that, so far, this was a useful exercise. Signed-off-by: Frank Mayhar <fmayhar@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: remove do_blk_alloc()Theodore Ts'o2008-12-121-34/+15
| | | | | | | | | | | | The convenience function do_blk_alloc() is a static function with only one caller, so fold it into ext4_new_meta_blocks() to simplify the code and to make it easier to understand. To save more stack space, if count is a null pointer in ext4_new_meta_blocks() assume that caller wanted a single block (and if there is an error, no blocks were allocated). Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: remove ext4_new_meta_block()Theodore Ts'o2008-12-071-17/+0
| | | | | | | | | There were only two one callers of the function ext4_new_meta_block(), which just a very simpler wrapper function around ext4_new_meta_blocks(). Change those two functions to call ext4_new_meta_blocks() directly, to save code and stack space usage. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: remove ext4_new_blocks() and call ext4_mb_new_blocks() directlyTheodore Ts'o2009-01-011-20/+0
| | | | | | | | | | There was only one caller of the compatibility function ext4_new_blocks(), in balloc.c's ext4_alloc_blocks(). Change it to call ext4_mb_new_blocks() directly, and remove ext4_new_blocks() altogether. This cleans up the code, by removing two extra functions from the call chain, and hopefully saving some stack usage. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: fix printk format warningAlexander Beregalov2008-10-291-1/+1
| | | | | | | | | | fs/ext4/balloc.c:607: warning: format '%lld' expects type 'long long int', but argument 2 has type 's64' fs/ext4/inode.c:1822: warning: format '%lld' expects type 'long long int', but argument 2 has type 's64' fs/ext4/inode.c:1824: warning: format '%lld' expects type 'long long int', but argument 2 has type 's64' Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* Merge branch 'next' into for-linusJames Morris2008-12-251-1/+1
|\
| * CRED: Wrap task credential accesses in the Ext4 filesystemDavid Howells2008-11-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: adilger@sun.com Cc: linux-ext4@vger.kernel.org Signed-off-by: James Morris <jmorris@namei.org>
* | revert "percpu_counter: new function percpu_counter_sum_and_set"Andrew Morton2008-12-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Revert commit e8ced39d5e8911c662d4d69a342b9d053eaaac4e Author: Mingming Cao <cmm@us.ibm.com> Date: Fri Jul 11 19:27:31 2008 -0400 percpu_counter: new function percpu_counter_sum_and_set As described in revert "percpu counter: clean up percpu_counter_sum_and_set()" the new percpu_counter_sum_and_set() is racy against updates to the cpu-local accumulators on other CPUs. Revert that change. This means that ext4 will be slow again. But correct. Reported-by: Eric Dumazet <dada1@cosmosbay.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mingming Cao <cmm@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Cc: <stable@kernel.org> [2.6.27.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | revert "percpu counter: clean up percpu_counter_sum_and_set()"Andrew Morton2008-12-101-2/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Revert commit 1f7c14c62ce63805f9574664a6c6de3633d4a354 Author: Mingming Cao <cmm@us.ibm.com> Date: Thu Oct 9 12:50:59 2008 -0400 percpu counter: clean up percpu_counter_sum_and_set() Before this patch we had the following: percpu_counter_sum(): return the percpu_counter's value percpu_counter_sum_and_set(): return the percpu_counter's value, copying that value into the central value and zeroing the per-cpu counters before returning. After this patch, percpu_counter_sum_and_set() has gone, and percpu_counter_sum() gets the old percpu_counter_sum_and_set() functionality. Problem is, as Eric points out, the old percpu_counter_sum_and_set() functionality was racy and wrong. It zeroes out counters on "other" cpus, without holding any locks which will prevent races agaist updates from those other CPUS. This patch reverts 1f7c14c62ce63805f9574664a6c6de3633d4a354. This means that percpu_counter_sum_and_set() still has the race, but percpu_counter_sum() does not. Note that this is not a simple revert - ext4 has since started using percpu_counter_sum() for its dirty_blocks counter as well. Note that this revert patch changes percpu_counter_sum() semantics. Before the patch, a call to percpu_counter_sum() will bring the counter's central counter mostly up-to-date, so a following percpu_counter_read() will return a close value. After this patch, a call to percpu_counter_sum() will leave the counter's central accumulator unaltered, so a subsequent call to percpu_counter_read() can now return a significantly inaccurate result. If there is any code in the tree which was introduced after e8ced39d5e8911c662d4d69a342b9d053eaaac4e was merged, and which depends upon the new percpu_counter_sum() semantics, that code will break. Reported-by: Eric Dumazet <dada1@cosmosbay.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mingming Cao <cmm@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* delay capable() check in ext4_has_free_blocks()Eric Sandeen2008-10-281-12/+14
| | | | | | | | | | | | | As reported by Eric Paris, the capable() check in ext4_has_free_blocks() sometimes causes SELinux denials. We can rearrange the logic so that we only try to use the root-reserved blocks when necessary, and even then we can move the capable() test to last, to avoid the check most of the time. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* merge ext4_claim_free_blocks & ext4_has_free_blocksEric Sandeen2008-10-281-41/+16
| | | | | | | | | Mingming pointed out that ext4_claim_free_blocks & ext4_has_free_blocks are largely cut & pasted; they can be collapsed/merged as follows. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Don't reuse released data blocks until transaction commitsAneesh Kumar K.V2008-10-101-2/+10
| | | | | | | | | | | We need to make sure we don't reuse the data blocks released during the transaction untill the transaction commits. We force this mode only for ordered and journalled mode. Writeback mode already don't provided data consistency. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: fix initialization of UNINIT bitmap blocksFrederic Bohe2008-10-101-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | This fixes a bug which caused on-line resizing of filesystems with a 1k blocksize to fail. The root cause of this bug was the fact that if an uninitalized bitmap block gets read in by userspace (which e2fsprogs does try to avoid, but can happen when the blocksize is less than the pagesize and an adjacent blocks is read into memory) ext4_read_block_bitmap() was erroneously depending on the buffer uptodate flag to decide whether it needed to initialize the bitmap block in memory --- i.e., to set the standard set of blocks in use by a block group (superblock, bitmaps, inode table, etc.). Essentially, ext4_read_block_bitmap() assumed it was the only routine that might try to read a block containing a block bitmap, which is simply not true. To fix this, ext4_read_block_bitmap() and ext4_read_inode_bitmap() must always initialize uninitialized bitmap blocks. Once a block or inode is allocated out of that bitmap, it will be marked as initialized in the block group descriptor, so in general this won't result any extra unnecessary work. Signed-off-by: Frederic Bohe <frederic.bohe@bull.net> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Remove old legacy block allocatorTheodore Ts'o2008-10-101-1344/+11
| | | | Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Don't add the inode to journal handle until after the block is allocatedAneesh Kumar K.V2008-09-081-1/+1
| | | | | | | | | | Make sure we don't add the inode to the journal handle until after the block allocation, so that a journal commit will not include the inode in case of block allocation failure. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Fix ext4 nomballoc allocator for ENOSPCAneesh Kumar K.V2008-09-081-8/+10
| | | | | | | | | | | | | | | | | | | | We run into ENOSPC error on nonmballoc ext4, even when there is free blocks on the filesystem. The patch includes two changes: a) Set reservation to NULL if we trying to allocate near group_target_block from the goal group if the free block in the group is less than windows. This should give us a better chance to allocate near group_target_block. This also ensures that if we are not allocating near group_target_block then we don't trun off reservation. This should enable us to allocate with reservation from other groups that have large free blocks count. b) we don't need to check the window size if the block reservation is off. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Signed arithmetic fixAneesh Kumar K.V2008-10-081-9/+10
| | | | | | | | | | This patch converts some usage of ext4_fsblk_t to s64. This is needed so that some of the sign conversion works as expected in if loops. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Add percpu dirty block accounting.Aneesh Kumar K.V2008-10-101-22/+40
| | | | | | | | | | | | This patch adds dirty block accounting using percpu_counters. Delayed allocation block reservation is now done by updating dirty block counter. In a later patch we switch to non delalloc mode if the filesystem free blocks is greater than 150% of total filesystem dirty blocks Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao<cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Retry block reservationAneesh Kumar K.V2008-09-081-1/+7
| | | | | | | | | | | | | During block reservation if we don't have enough blocks left, retry block reservation with smaller block counts. This makes sure we try fallocate and DIO with smaller request size and don't fail early. The delayed allocation reservation cannot try with smaller block count. So retry block reservation to handle temporary disk full conditions. Also print free blocks details if we fail block allocation during writepages. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Make sure all the block allocation paths reserve blocksAneesh Kumar K.V2008-10-091-16/+42
| | | | | | | | | | | | | | | | With delayed allocation we need to make sure block are reserved before we attempt to allocate them. Otherwise we get block allocation failure (ENOSPC) during writepages which cannot be handled. This would mean silent data loss (We do a printk stating data will be lost). This patch updates the DIO and fallocate code path to do block reservation before block allocation. This is needed to make sure parallel DIO and fallocate request doesn't take block out of delayed reserve space. When free blocks count go below a threshold we switch to a slow patch which looks at other CPU's accumulated percpu counter values. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Fix whitespace checkpatch warnings/errorsTheodore Ts'o2008-09-081-35/+35
| | | | | Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Add printk priority levels to clean up checkpatch warningsTheodore Ts'o2008-09-081-14/+15
| | | | | Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* percpu counter: clean up percpu_counter_sum_and_set()Mingming Cao2008-10-091-1/+1
| | | | | | | | | | | | | | | | percpu_counter_sum_and_set() and percpu_counter_sum() is the same except the former updates the global counter after accounting. Since we are taking the fbc->lock to calculate the precise value of the counter in percpu_counter_sum() anyway, it should simply set fbc->count too, as the percpu_counter_sum_and_set() does. This patch merges these two interfaces into one. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: make sure ext4_has_free_blocks returns 0 for ENOSPCAneesh Kumar K.V2008-08-191-0/+3
| | | | | | | | Fix ext4_has_free_blocks() to return 0 when we don't have enough space. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: lock block groups when initializingEric Sandeen2008-08-021-0/+3
| | | | | | | | | | | | | | | | | | | | | | | I noticed when filling a 1T filesystem with 4 threads using the fs_mark benchmark: fs_mark -d /mnt/test -D 256 -n 100000 -t 4 -s 20480 -F -S 0 that I occasionally got checksum mismatch errors: EXT4-fs error (device sdb): ext4_init_inode_bitmap: Checksum bad for group 6935 etc. I'd reliably get 4-5 of them during the run. It appears that the problem is likely a race to init the bg's when the uninit_bg feature is enabled. With the patch below, which adds sb_bgl_locking around initialization, I was able to complete several runs with no errors or warnings. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: sync up block and inode bitmap reading functionsEric Sandeen2008-08-021-4/+4
| | | | | | | | | | | | | | | | | | | | | ext4_read_block_bitmap and read_inode_bitmap do essentially the same thing, and yet they are structured quite differently. I came across this difference while looking at doing bg locking during bg initialization. This patch: * removes unnecessary casts in the error messages * renames read_inode_bitmap to ext4_read_inode_bitmap * and more substantially, restructures the inode bitmap reading function to be more like the block bitmap counterpart. The change to the inode bitmap reader simplifies the locking to be applied in the next patch. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: delayed allocation ENOSPC handlingMingming Cao2008-07-141-17/+32
| | | | | | | | | | | | | | | | | | | | This patch does block reservation for delayed allocation, to avoid ENOSPC later at page flush time. Blocks(data and metadata) are reserved at da_write_begin() time, the freeblocks counter is updated by then, and the number of reserved blocks is store in per inode counter. At the writepage time, the unused reserved meta blocks are returned back. At unlink/truncate time, reserved blocks are properly released. Updated fix from Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> to fix the oldallocator block reservation accounting with delalloc, added lock to guard the counters and also fix the reservation for meta blocks. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* percpu_counter: new function percpu_counter_sum_and_setMingming Cao2008-07-111-1/+1
| | | | | | | | | | | | | | | | Delayed allocation need to check free blocks at every write time. percpu_counter_read_positive() is not quit accurate. delayed allocation need a more accurate accounting, but using percpu_counter_sum_positive() is frequently is quite expensive. This patch added a new function to update center counter when sum per-cpu counter, to increase the accurate rate for next percpu_counter_read() and require less calling expensive percpu_counter_sum(). Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: mballoc avoid use root reserved blocks for non root allocationMingming Cao2008-07-111-18/+33
| | | | | | | | | mballoc allocation missed check for blocks reserved for root users. Add ext4_has_free_blocks() check before allocation. Also modified ext4_has_free_blocks() to support multiple block allocation request. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: cleanup block allocatorAneesh Kumar K.V2008-07-111-53/+74
| | | | | | | | | Move the code related to block allocation to a single function and add helper funtions to differient allocation for data and meta data blocks Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Use inode preallocation with -o noextentsAneesh Kumar K.V2008-07-111-2/+34
| | | | | | | | | | | | | | | | | | | When mballoc is enabled, block allocation for old block-based files are allocated using mballoc allocator instead of old block-based allocator. The old ext3 block reservation is turned off when mballoc is turned on. However, the in-core preallocation is not enabled for block-based/ non-extent based file block allocation. This result in performance regression, as now we don't have "reservation" ore in-core preallocation to prevent interleaved fragmentation in multiple writes workload. This patch fix this by enable per inode in-core preallocation for non extent files when mballoc is used. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: fix ext4_init_block_bitmap() for metablock block groupAkinobu Mita2008-07-111-6/+1
| | | | | | | | | | | | | | | When meta_bg feature is enabled and s_first_meta_bg != 0, ext4_init_block_bitmap() miscalculates the number of block used by the group descriptor table (0 or 1 for metablock block group) This patch fixes this by using ext4_bg_num_gdb() Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Stephen Tweedie <sct@redhat.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Acked-by: Andreas Dilger <adilger@sun.com>
* ext4: Fix sparse warningAneesh Kumar K.V2008-07-111-1/+1
| | | | | Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
OpenPOWER on IntegriCloud