summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* libata: increase 128 KB / cmd limit for ATAPI tape drivesTony Battersby2007-11-031-0/+4
| | | | | | | | | | | | | | | | | | | | | | | Commands sent to ATAPI tape drives via the SCSI generic (sg) driver are limited in the amount of data that they can transfer by the max_sectors value. The max_sectors value is currently calculated according to the command set for disk drives, which doesn't apply to tape drives. The default max_sectors value of 256 limits ATAPI tape drive commands to 128 KB. This patch against 2.6.24-rc1 increases the max_sectors value for tape drives to 65535, which permits tape drive commands to transfer just under 32 MB. Tested with a SuperMicro PDSME motherboard, AHCI, and a Sony SDX-570V SATA tape drive. Note that some of the chipset drivers also set their own max_sectors value, which may override the value set in libata-core. I don't have any of these chipsets to test, so I didn't go messing with them. Also, ATAPI devices other than tape drives may benefit from similar changes, but I have only tape drives and disk drives to test. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sata_promise: fix endianess bug in ASIC PRD bug workaroundMikael Pettersson2007-11-031-1/+1
| | | | | | | | | | | | | | | | | The original workaround for the Promise ASIC PRD bug contained an endianess bug which I failed to detect: the adjustment of the last PRD entry's length field applied host arithmetic to little-endian data, which is incorrect on big-endian machines. We have the length available in host-endian format, so do the adjustment on host-endian data and then convert and store it in the PRD entry's little-endian data field. Thanks to an anonymous reviewer for detecting this bug. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: fix docbookStephen Hemminger2007-11-031-3/+3
| | | | | | | Fix docbook format in the comments. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* make ata_scsi_lpm_get() staticAdrian Bunk2007-11-031-1/+1
| | | | | | | ata_scsi_lpm_get() can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: suppress two warningsStephen Rothwell2007-11-031-0/+4
| | | | | | | | drivers/ata/libata-core.c:768: warning: 'ata_lpm_enable' defined but not used drivers/ata/libata-core.c:784: warning: 'ata_lpm_disable' defined but not used Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: Remove ata_scsi_suspend/resume callbacksashish kalra2007-11-031-4/+0
| | | | | | Signed-off-by: ashish kalra <ashish.kalra@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: Remove sending LOG EXT command in sata_fsl_softreset()ashish kalra2007-11-031-70/+0
| | | | | | Signed-off-by: ashish kalra <ashish.kalra@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: Move MPC8315DS link speed limit workaround to specific ifdefashish kalra2007-11-031-0/+2
| | | | | | Signed-off-by: ashish kalra <ashish.kalra@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: cleanup style problemLi Yang2007-11-031-6/+6
| | | | | Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: remove unneeded sata_fsl_hardreset()Jeff Garzik2007-11-031-13/+1
| | | | | | Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: remove unneeded on-stack copy of FISJeff Garzik2007-11-031-3/+1
| | | | | | | | | Remove unneeded on-stack copy of FIS in sata_fsl_cache_taskfile_from_d2h_fis(). Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: cleanup needless casts to/from void __iomem *Jeff Garzik2007-11-031-2/+2
| | | | | | Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: Remove unnecessary SCR casesJeff Garzik2007-11-031-14/+2
| | | | | | | | | | SCRs in the driver map to the standard values found in include/linux/ata.h, so no need for individual scr_read/scr_write case statements duplicating the natural value. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: Kill ata_sg_is_last()Li Yang2007-11-031-1/+1
| | | | | Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: save irq in private data for irq unmappingLi Yang2007-11-031-1/+3
| | | | | | | Powerpc uses virtual irq which has to be unmapped. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: Remove deprecated hooksLi Yang2007-11-031-4/+0
| | | | | Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata/sata_fsl: Update for ata_link introductionLi Yang2007-11-031-13/+18
| | | | | | | Update the driver to use the newly added ata_link structure. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Use i8253.c lock for PC speaker on MIPS, too.Ralf Baechle2007-11-021-1/+1
| | | | | | | | | | The Jazz machines have to use the PIT timer for dyntick and highresolution kernels. This may break because currently just like i386 used to do MIPS uses two separate spinlocks in the actual PIT code and the PC speaker code. So switch to do it the same that x86 currently does PIT locking. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2007-11-025-54/+81
|\ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: linux-input mailing list moved to vger.kernel.org Input: inport, logibm - use KERN_INFO when reporting missing mouse Input: appletouch - idle reset logic broke older Fountains Input: hp_sdc.c - fix section mismatch Input: appletouch - add Johannes Berg as maintainer Input: Add Euro and Dollar key codes Input: xpad - add more USB IDs
| * Input: inport, logibm - use KERN_INFO when reporting missing mouseHelge Deller2007-11-012-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Many mouse drivers are often compiled (e.g. in Linux distributions) into the kernel at the same time just to make sure that at least one driver will suceed in find it's mouse device. Nevertheless, only the inport and logitech busmouse mouse drivers report with KERN_ERR log level if the mouse wasn't found. They should use KERN_INFO instead, because it's not an error if the mouse isn't attached at all. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * Input: appletouch - idle reset logic broke older FountainsDmitry Torokhov2007-11-011-48/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fountains do not support change mode request and therefore should be excluded from idle reset attempts. Also: - do not re-submit URB when we decide that touchpad needs to be reinicialized - do not repeat size detection when reinitializing the touchpad - Add missing KERN_* prefixes to messages Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Johannes Berg <johannes@sipsolutions.net>
| * Input: hp_sdc.c - fix section mismatchAdrian Bunk2007-10-271-4/+0
| | | | | | | | | | | | | | | | hp_sdc_exit() mustn't be __exit since it's called from the __init hp_sdc_register(). Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * Input: xpad - add more USB IDsJoshua J Bowman2007-10-271-0/+2
| | | | | | | | | | | | | | | | Add USB IDs of Mad Catz Wired Xbox 360 Controller and Pelican 'TSZ' Wired Xbox 360 Controller. Signed-off-by: Joshua J Bowman <bowmanj@augsburg.edu> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds2007-11-0221-109/+92
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] iTCO_wdt.c ICH8 pci-device-id's [WATCHDOG] iTCO_wdt.c init & exit fixes [WATCHDOG] iTCO_wdt.c pci_device_id table clean-up [WATCHDOG] spin_lock_init() fixes [WATCHDOG] Unlock in iTCO_wdt_start when reboot is disabled [WATCHDOG] Add necessary braces to if (...) \n #if... cases [WATCHDOG] trivial fix two returns in void functions
| * | [WATCHDOG] iTCO_wdt.c ICH8 pci-device-id'sWim Van Sebroeck2007-11-021-4/+12
| | | | | | | | | | | | | | | | | | | | | Add the pci-device-id's for the ICH8M and the ICH8M-E chipsets. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * | [WATCHDOG] iTCO_wdt.c init & exit fixesWim Van Sebroeck2007-11-021-5/+5
| | | | | | | | | | | | | | | | | | | | | Mark init and exit procedures as __devinit & _-devexit. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * | [WATCHDOG] iTCO_wdt.c pci_device_id table clean-upWim Van Sebroeck2007-11-021-39/+48
| | | | | | | | | | | | | | | | | | | | | Make the pci_device_id table more readable. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * | [WATCHDOG] spin_lock_init() fixesAlexey Dobriyan2007-11-0219-57/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some watchdog drivers initialize global spinlocks in module's init function which is tolerable, but some do it in PCI probe function. So, switch to static initialization to fix theoretical bugs and, more importantly, stop giving people bad examples. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | [WATCHDOG] Unlock in iTCO_wdt_start when reboot is disabledRoel Kluin2007-10-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Unlock in iTCO_wdt_start when reboot is disabled Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * | [WATCHDOG] Add necessary braces to if (...) \n #if... casesIlpo Jarvinen2007-10-252-2/+4
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Ilpo Jarvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | [WATCHDOG] trivial fix two returns in void functionsFlorian Fainelli2007-10-252-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes two returns in the TI Davinci and PNX4008 in void functions. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* | | Merge branch 'for-linus' of ↵Linus Torvalds2007-11-013-7/+25
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Don't access input_dev->private directly HID: fix hidinput_connect ignoring retval from input_register_device HID: hiddev - fix compiler warning HID: Add GoTop tablets to blacklist
| * | | HID: Don't access input_dev->private directlyDmitry Torokhov2007-10-311-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | input_{get|set}_drvdata() helpers should be used instead. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | | HID: fix hidinput_connect ignoring retval from input_register_deviceDirk Hohndel2007-10-311-4/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | hidinput_connect() ignores retval from input_register_device(). Fix it by properly undoing all the registrations that have been already done, and return error. Signed-off-by: Dirk Hohndel <hohndel@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | | HID: hiddev - fix compiler warningJiri Kosina2007-10-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/hid/usbhid/hiddev.c: In function 'hiddev_compat_ioctl': drivers/hid/usbhid/hiddev.c:746: warning: passing argument 4 of 'hiddev_ioctl' makes integer from pointer without a cast Add cast to hiddev_compat_ioctl() Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | | HID: Add GoTop tablets to blacklistJerrold Jones2007-10-311-0/+8
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | GoTop devices are handled by usbtouchscreen driver, make sure HID ignores them. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | Merge branch 'upstream-linus' of ↵Linus Torvalds2007-11-013-8/+6
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: Fix myri10ge NAPI oops & warnings Fix region size check in mpc5200 FEC driver mpc5200: Fix Kconfig dependancies on MPC5200 FEC device driver
| * | | Fix myri10ge NAPI oops & warningsAndrew Gallatin2007-11-011-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When testing the myri10ge driver with 2.6.24-rc1, I found that the machine crashed under heavy load: Unable to handle kernel paging request at 0000000000100108 RIP: [<ffffffff803cc8dd>] net_rx_action+0x11b/0x184 The address corresponds to the list_move_tail() in netif_rx_complete(): if (unlikely(work == weight)) list_move_tail(&n->poll_list, list); Eventually, I traced the crashes to calling netif_rx_complete() with work_done == budget. From looking at other drivers, it appears that one should only call netif_rx_complete() when work_done < budget. To fix it, I changed the test in myri10ge_poll() so that it refers to to work_done rather than looking at the rx ring status. If work_done is < budget, then that implies we have no more packets to process. Any races will be resolved by the NIC when the write to irq_claim is made. In myri10ge_clean_rx_done(), if we ever exceeded our budget, it would report a work_done one larger than was acutally done. This is because the increment was done in the conditional, so work_done would be incremented regardless of whether or not the test passed or failed. This would lead to the WARN_ON_ONCE(work > weight); warning in net_rx_action triggering. I've moved the increment of work_done inside the loop. Note that this would only be a problem when we had exceeded our budget. Signed off by: Andrew Gallatin <gallatin@myri.com> Andrew Gallatin Myricom Inc Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | Fix region size check in mpc5200 FEC driverGrant Likely2007-11-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Driver shouldn't complain if the register range is larger than what it expects. This works around failures with some device trees. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | mpc5200: Fix Kconfig dependancies on MPC5200 FEC device driverGrant Likely2007-11-011-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When not building an arch/powerpc kernel, the mpc5200 FEC driver depends on some symbols which are not defined (BESTCOMM & BESTCOMM_FEC). This patch flips around the dependancy logic so that it cannot be selected unless BESTCOMM_FEC is selected first. Kconfig stops complaining this way. Also, the driver only works for arch/powerpc (not arch/ppc) anyway so it should depend on PPC_MERGE also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | | [NET]: Forget the zero_it argument of sk_alloc()Pavel Emelyanov2007-11-012-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Finally, the zero_it argument can be completely removed from the callers and from the function prototype. Besides, fix the checkpatch.pl warnings about using the assignments inside if-s. This patch is rather big, and it is a part of the previous one. I splitted it wishing to make the patches more readable. Hope this particular split helped. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds2007-10-311-0/+18
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: Revert "Driver core: remove class_device_*_bin_file"
| * | | | Revert "Driver core: remove class_device_*_bin_file"Greg Kroah-Hartman2007-10-311-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit fcd239d3d5575e5cc63aab5c33cf6dc66904f6d6. I messed up, ia64 still uses these files in the current tree, and now can not build the pci code, which all ia64 boxes seem to require :) This fixes that mistake. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | | Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2007-10-312-8/+11
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4634/1: DaVinci GPIO header build fix [ARM] 4636/1: pxa: add default configuration for zylonite [ARM] 4635/1: pxa: Change Eric Miao's email address to eric.miao@marvell.com [ARM] Fix assignment instead of condition in arm/mach-omap2/clock.c [ARM] nommu: fix breakage caused by f9720205d1f847cb59e197e851b5276425363f6b [ARM] pxa: shut up CLOCK_EVT_MODE_RESUME warning [ARM] Fix FIQ issue with ARM926 [ARM] Fix pxamci regression [ARM] Fix netx_defconfig regression [ARM] Fix ateb9200_defconfig build regression [ARM] Fix an rpc_defconfig regression [ARM] Fix omap_h2_1610_defconfig regressions [ARM] 4632/1: Fix a typo in include/asm-arm/plat-s3c/regs-nand.h
| * | | | | [ARM] Fix pxamci regressionRussell King2007-10-311-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix: WARNING: at arch/arm/mach-pxa/clock.c:69 clk_disable() [<c002d7c8>] (dump_stack+0x0/0x14) from [<c00334f4>] (clk_disable+0x34/0xa0) [<c00334c0>] (clk_disable+0x0/0xa0) from [<c028a43c>] (pxamci_set_ios+0x74/0xf0) [<c028a3c8>] (pxamci_set_ios+0x0/0xf0) from [<c0281548>] (mmc_power_off+0x90/0x9c) [<c02814b8>] (mmc_power_off+0x0/0x9c) from [<c0281a30>] (mmc_start_host+0x18/0x28) [<c0281a18>] (mmc_start_host+0x0/0x28) from [<c02825a0>] (mmc_add_host+0xe8/0x104) [<c02824b8>] (mmc_add_host+0x0/0x104) from [<c028a7d0>] (pxamci_probe+0x24c/0x2f4) [<c028a584>] (pxamci_probe+0x0/0x2f4) from [<c01e5948>] (platform_drv_probe+0x20/0x24) ... Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | [ARM] Fix an rpc_defconfig regressionRussell King2007-10-311-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix: CC drivers/scsi/arm/powertec.o In file included from drivers/scsi/arm/powertec.c:29: drivers/scsi/arm/scsi.h: In function 'next_SCp': drivers/scsi/arm/scsi.h:42: error: 'struct scatterlist' has no member named 'page' drivers/scsi/arm/scsi.h: In function 'init_SCp': drivers/scsi/arm/scsi.h:80: error: 'struct scatterlist' has no member named 'page' Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | | | ieee1394: ieee1394_transactions.c: remove dead codeAdrian Bunk2007-10-311-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes dead code spotted by the Intel C Compiler. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | | | | | firewire: Fix pci resume to not pass in a __be32 config rom.Kristian Høgsberg2007-10-311-12/+25
| |/ / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ohci_enable() function shared between pci_probe and pci_resume takes a host endian config rom, but ohci->config_rom is __be32. This sets up the config rom in the wrong endian on little endian machine, specifically, BusOptions will be initialized to a 0 max receive size. This patch changes the way we reuse the config rom so that we avoid this problem. Signed-off-by: Kristian Hoegsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | | | | [MEDIA] IVTV: exit_ivtv_i2c() cannot be __devexitDavid Miller2007-10-312-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is referenced both from __devinit code (ivtv_probe) and normal .text (ivtv_process_eeprom), and therefore cannot be discarded via __devexit. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | Merge branch 'master' of ↵Linus Torvalds2007-10-312-5/+2
|\ \ \ \ \ | |/ / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: [AF_KEY]: suppress a warning for 64k pages. [TIPC]: Fix headercheck wrt. tipc_config.h [COMPAT]: Fix build on COMPAT platforms when CONFIG_NET is disabled. [CONNECTOR]: Fix a spurious kfree_skb() call [COMPAT]: Fix new dev_ifname32 returning -EFAULT [NET]: Fix incorrect sg_mark_end() calls. [IPVS]: Remove /proc/net/ip_vs_lblcr [IPV6]: remove duplicate call to proc_net_remove [NETNS]: fix net released by rcu callback [NET]: Fix free_netdev on register_netdev failure. [WAN]: fix drivers/net/wan/lmc/ compilation
OpenPOWER on IntegriCloud