summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* e1000e: fix acquisition of SW/FW/HW semaphore for ICHx partsBruce Allan2009-08-091-13/+31
| | | | | | | | | | | For ICHx parts, write the EXTCNF_CTRL.SWFLAG bit once when trying to acquire the SW/FW/HW semaphore instead of multiple times to prevent the hardware from having problems (especially for systems with manageability enabled), and extend the timeout for the hardware to set the SWFLAG bit. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: Disable packet split only on FCoE queues in 82599Yi Zou2009-08-092-16/+19
| | | | | | | | | | | | | For 82599, packet split has to be disabled for FCoE direct data placement. However, this is only required on received queues allocated for FCoE. This patch adds a per ring flags to indicate if packet split is disabled on a per queue basis, particularly for FCoE, as packet split must be disabled for large receive using direct data placement (DDP). Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: Pass rx_ring directly in ixgbe_configure_srrctl()Yi Zou2009-08-091-40/+15
| | | | | | | | | | | | | Instead of passing the register index of the corresponding rx_ring and find the way back to get to corresponding rx_ring in ixgbe_configure_srrctl(), simplify the function ixgbe_configure_srrctl() by passing the rx_ring into it. Then the register index for that rx_ring is already available from rx_ring->reg_idx. Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tun: Extend RTNL lock coverage over whole ioctlHerbert Xu2009-08-091-31/+19
| | | | | | | | | | | | | | | | | | | | | | As it is, parts of the ioctl runs under the RTNL and parts of it do not. The unlocked section is still protected by the BKL, but there can be subtle races. For example, Eric Biederman and Paul Moore observed that if two threads tried to create two tun devices on the same file descriptor, then unexpected results may occur. As there isn't anything in the ioctl that is expected to sleep indefinitely, we can prevent this from occurring by extending the RTNL lock coverage. This also allows to get rid of the BKL. Finally, I changed tun_get_iff to take a tun device in order to avoid calling tun_put which would dead-lock as it also tries to take the RTNL lock. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* fec: fix FEC driver packet transmission breakageGreg Ungerer2009-08-091-4/+5
| | | | | | | | | | | | | | | | | | | | Commit f0b3fbeae11a526c3d308b691684589ee37c359b ("FEC Buffer rework") breaks transmission of packets where the skb data buffer is not memory aligned according to FEC_ALIGNMENT. It incorrectly passes to dma_sync_single() the buffer address directly from the skb, instead of the address calculated for use (which may be the skb address or one of the bounce buffers). It seems there is no use converting the cpu address of the buffer to a physical either, since dma_map_single() expects the cpu address and will return the dma address to use in the descriptor. So remove the use of __pa() on the buffer address as well. This patch is against 2.6.30-rc5. This breakage is a regression over 2.6.30, which does not have this problem. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* atlx: strncpy does not null terminate stringRoel Kluin2009-08-092-8/+8
| | | | | | | | | | | strlcpy() will always null terminate the string. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Jay Cliburn <jcliburn@gmail.com> Cc: Chris Snook <csnook@redhat.com> Cc: Jie Yang <jie.yang@atheros.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* irda: fix read buffer overflowRoel Kluin2009-08-091-1/+1
| | | | | | | | | io[i] is read before the bounds check on i, order should be reversed. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller2009-08-09694-12298/+23374
|\
| * Merge branch 'for-linus' of git://git.infradead.org/ubi-2.6Linus Torvalds2009-08-092-1/+13
| |\ | | | | | | | | | | | | | | | * 'for-linus' of git://git.infradead.org/ubi-2.6: UBI: compatible fallback in absense of sequence numbers UBI: fix double free on error path
| | * UBI: compatible fallback in absense of sequence numbersAdrian Hunter2009-07-241-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fall back onto thinking everything's OK if either of the sequence numbers we are asked to compare is zero, which is what was used before sequence numbers were introduced. [ Artem: modified the patch to be applicable to upstream UBI, added big comment ] Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
| | * UBI: fix double free on error pathAdrian Hunter2009-07-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we fail in 'ubi_eba_init_scan()', we free 'ubi->volumes[i]->eba_tbl' in there, but also later free it in 'free_internal_volumes()'. Fix this by assigning NULL to 'ubi->volumes[i]->eba_tbl' after it is freed. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
| * | drm/i915: silence vblank warningsFrans Pop2009-08-091-2/+2
| | | | | | | | | | | | | | | | | | | | | these errors are pretty pointless Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | drm: silence pointless vblank warning.Paul Rolland2009-08-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some applications/hardware combinations are triggering the message "failed to acquire vblank counter" to be issued up to 20 times a second, which makes it both useless and dangerous, as this may hide other important messages. This changes makes it only appear when people are debugging. Signed-off-by: Paul Rolland <rol@as2917.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Lost-twice-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | drm: When adding probed modes, preserve duplicate mode typesKeith Packard2009-08-091-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code which takes probed modes and adds them to a connector eliminates duplicate modes by comparing them using drm_mode_equal. That function doesn't consider the type bits, which means that any modes which differ only in the type field will be lost. One of the bits in the mode->type field is the DRM_MODE_TYPE_PREFERRED bit. If the mode with that bit is lost, then higher level code will not know which mode to select, causing a random mode to be used instead. This patch simply merges the two mode type bits together; that seems reasonable to me, but perhaps only a subset of the bits should be used? None of these can be user defined as they all come from looking at just the hardware. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds2009-08-0712-18/+53
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: fix oops on disconnect in cdc-acm USB: storage: include Prolific Technology USB drive in unusual_devs list USB: ftdi_sio: add product_id for Marvell OpenRD Base, Client USB: ftdi_sio: add vendor and product id for Bayer glucose meter serial converter cable USB: EHCI: fix counting of transaction error retries USB: EHCI: fix two new bugs related to Clear-TT-Buffer USB: usbfs: fix -ENOENT error code to be -ENODEV USB: musb: fix the nop registration for OMAP3EVM USB: devio: Properly do access_ok() checks USB: pl2303: New vendor and product id
| | * | USB: fix oops on disconnect in cdc-acmOliver Neukum2009-08-072-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes an oops caused when during an unplug a device's table of endpoints is zeroed before the driver is notified. A pointer to the endpoint must be cached. this fixes a regression caused by commit 5186ffee2320942c3dc9745f7930e0eb15329ca6 Therefore it should go into 2.6.31 Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | USB: storage: include Prolific Technology USB drive in unusual_devs listRogerio Brito2009-08-071-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a quirk entry for the Leading Driver UD-11 usb flash drive. As Alan Stern told me, the device doesn't deal correctly with the locking media feature of the device, and this patch incorporates it. Compiled, tested, working. Signed-off-by: Rogerio Brito <rbrito@ime.usp.br> Cc: Phil Dibowitz <phil@ipom.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Robert Hancock <hancockrwd@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | USB: ftdi_sio: add product_id for Marvell OpenRD Base, ClientDhaval Vasa2009-08-072-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | reference: http://www.open-rd.org Signed-off-by: Dhaval Vasa <dhaval.vasa@einfochips.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | USB: ftdi_sio: add vendor and product id for Bayer glucose meter serial ↵Marko Hänninen2009-08-072-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | converter cable Attached patch adds USB vendor and product IDs for Bayer's USB to serial converter cable used by Bayer blood glucose meters. It seems to be a FT232RL based device and works without any problem with ftdi_sio driver when this patch is applied. See: http://winglucofacts.com/cables/ Signed-off-by: Marko Hänninen <bugitus@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | USB: EHCI: fix counting of transaction error retriesAlan Stern2009-08-072-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1274) simplifies the counting of transaction-error retries. Now we will count up from 0 to QH_XACTERR_MAX instead of down from QH_XACTERR_MAX to 0. The patch also fixes a small bug: qh->xacterr was not getting initialized for interrupt endpoints. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | USB: EHCI: fix two new bugs related to Clear-TT-BufferAlan Stern2009-08-072-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1273) fixes two(!) bugs introduced by the new Clear-TT-Buffer implementation in ehci-hcd. It is now possible for an idle QH to have some URBs on its queue -- this will happen if a Clear-TT-Buffer is pending for the QH's endpoint. Consequently we should not issue a warning when someone tries to unlink an URB from an idle QH; instead we should process the request immediately. The refcounts for QHs could get messed up, because submit_async() would increment the refcount when calling qh_link_async() and qh_link_async() would then refuse to link the QH into the schedule if a Clear-TT-Buffer was pending. Instead we should increment the refcount only when the QH actually is added to the schedule. The current code tries to be clever by leaving the refcount alone if an unlink is immediately followed by a relink; the patch changes this to an unconditional decrement and increment (although they occur in the opposite order). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Tested-by: Manuel Lauss <manuel.lauss@gmail.com> Tested-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | USB: usbfs: fix -ENOENT error code to be -ENODEVAlan Stern2009-08-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1272) changes the error code returned when an open call for a USB device node fails to locate the corresponding device. The appropriate error code is -ENODEV, not -ENOENT. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Kay Sievers <kay.sievers@vrfy.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | USB: musb: fix the nop registration for OMAP3EVMGupta, Ajay Kumar2009-08-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OMAP3EVM uses ISP1504 phy which doesn't require any programming and thus has to use NOP otg transceiver. Cleanups being done: - Remove unwanted code in usb-musb.c file - Register NOP in OMAP3EVM board file using usb_nop_xceiv_register(). - Select NOP_USB_XCEIV for OMAP3EVM boards. - Don't enable TWL4030_USB in omap3_evm_defconfig Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Eino-Ville Talvala <talvala@stanford.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | USB: devio: Properly do access_ok() checksMichael Buesch2009-08-071-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | access_ok() checks must be done on every part of the userspace structure that is accessed. If access_ok() on one part of the struct succeeded, it does not imply it will succeed on other parts of the struct. (Does depend on the architecture implementation of access_ok()). This changes the __get_user() users to first check access_ok() on the data structure. Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: stable <stable@kernel.org> Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | USB: pl2303: New vendor and product idKhanh-Dang Nguyen Thu Lam2009-08-072-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I am submitting a patch for the pl2303 driver. This patch adds support for the "Sony QN-3USB" cable (vendor=0x054c, product=0x0437). This USB cable is a so-called data cable used to connect a Sony mobile phone to a computer. Supported models are Sony CMD-J5, J6, J7, J16, J26, J70 and Z7. I have used this patch with my Sony CMD-J70 for several days and I haven't encountered any kernel/hardware issue. From: Khanh-Dang Nguyen Thu Lam <kdntl@yahoo.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds2009-08-0712-58/+80
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: rspiusb: Fix buffer overflow staging: add dependencies on PCI for drivers that require it Staging: rtl8192su: fix build error Staging: rt2870: Revert d44ca7 Removal of kernel_thread() API Staging: rt2870: Add USB ID for Linksys, Planex Communications, Belkin
| | * | | Staging: rspiusb: Fix buffer overflowRoel Kluin2009-08-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | usb_buffer_map_sg() may return -1. This will result in a read from pdx->PixelUrb[frameInfo][-1] Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | | staging: add dependencies on PCI for drivers that require itJeff Mahoney2009-08-072-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds PCI dependencies to staging drivers that require it. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | | Staging: rtl8192su: fix build errorGreg Kroah-Hartman2009-08-074-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a build error when selecting the rtl8192su driver as a module. This has been reported by me, and the opensuse kernel developer team, and I finally tracked it down. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | | Staging: rt2870: Revert d44ca7 Removal of kernel_thread() APIMike Galbraith2009-08-075-54/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Staging: rt2870: Revert d44ca7 Removal of kernel_thread() API The sanity check this patch introduced triggers on shutdown, apparently due to threads having already exited by the time BUG_ON() is reached. Signed-off-by: Mike Galbraith <efault@gmx.de> Cc: Peter Teoh <htmldeveloper@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | | Staging: rt2870: Add USB ID for Linksys, Planex Communications, BelkinJakob Gruber2009-08-071-0/+3
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linksys WUSB100, Belkin F5D8053 N, Planex Communications unknown model. Signed-off-by: Jakob Gruber <jakob.gruber@kabelnet.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | Merge branch 'for-linus' of ↵Linus Torvalds2009-08-0717-513/+1221
| |\ \ \ | | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (22 commits) drm/i915: Fix read outside array bounds in restoring the SWF10 range. drm/i915: Use our own workqueue to avoid wedging the system along with the GPU. drm/i915: Add support for dual-channel LVDS on 8xx. drm/i915: Return disconnected for SDVO DVI when there's no digital EDID. drm/i915: Choose real sdvo output according to result from detection drm/i915: Set preferred mode for integrated TV according to TV format drm/i915: fix 845G FIFO size & burst length drm/i915: fix VGA detect on IGDNG drm/i915: Add eDP support on IGDNG mobile chip drm/i915: enable DisplayPort support on IGDNG drm/i915: Fix channel ending action for DP aux transaction drm/i915: fix issue in display pipe setup on IGDNG drm/i915: disable VGA plane reliably drm/I915: Fix offset to DVO timings in LVDS data drm/i915: hdmi detection according by reading edid drm/i915: correct self-refresh calculation in "everything off" case drm/i915: handle FIFO oversubsription correctly drm/i915: FIFO watermark calculation fixes drm/i915: ignore lvds on AOpen Mini PC MP-915 drm/i915: Allow frame buffers up to 4096x4096 on 915/945 class hardware ...
| | * | drm/i915: Fix read outside array bounds in restoring the SWF10 range.Roel Kluin2009-08-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dev_priv->saveSWF1 is a 16 element array, but this reads up to index 22, and restored values from the wrong registers. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | drm/i915: Use our own workqueue to avoid wedging the system along with the GPU.Eric Anholt2009-08-054-6/+19
| | | | | | | | | | | | | | | | Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | drm/i915: Add support for dual-channel LVDS on 8xx.ling.ma@intel.com2009-07-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This corresponds to a fix to UMS back in 2007. Fixes fd.o bug #20115. Signed-off-by: Ma Ling <ling.ma@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | drm/i915: Return disconnected for SDVO DVI when there's no digital EDID.ling.ma@intel.com2009-07-301-6/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch fixed a bug on MP965-D. When VGA is connected to a DVI-I connector, it incorrectly shows sdvo dvi as connected. Signed-off-by: Ma Ling <ling.ma@intel.com> [anholt: hand-resolved against previous commit and fixed up commit message] Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | drm/i915: Choose real sdvo output according to result from detectionling.ma@intel.com2009-07-291-78/+153
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Baed on Eric's idea in order to handle multiple sdvo encoders we implement another approach to dynamically chose real one encoder after detection, which is contrasted with patch - drm/i915:Construct all possible sdvo outputs for sdvo encoder. Signed-off-by: Ma Ling <ling.ma@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | drm/i915: Set preferred mode for integrated TV according to TV formatling.ma@intel.com2009-07-291-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to get best possible quality image we chose 640x480 for NTSC, PAL and 480p, 1280x720 for 720p, 1920x1080 for 1080i/p TV format respectively. Signed-off-by: Ma Ling <ling.ma@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | drm/i915: fix 845G FIFO size & burst lengthJesse Barnes2009-07-291-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I had one report of flicker due to FIFO underruns on 845G. Scott was kind enough to test a few patches and report success with this one. Looks like 845G measures FIFO size slightly differently than other chips, and we were also clobbering the FIFO burst length. Fixing both of those issues gives him a healthy machine again. Note that we still only adjust plane A's watermark in the 830/845 case. If someone is willing to test we could support a bigger variety of dual-head 830/845 configurations with a bit more code. Fixes fdo bug #19304 (again). Reported-by: Scott Hansen <scottandchrystie@comcast.net> Tested-by: Scott Hansen <scottandchrystie@comcast.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | drm/i915: fix VGA detect on IGDNGZhenyu Wang2009-07-291-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check FORCE_DETECT bit to be clear for the finish of hotplug detect process. Also check possible mono monitor which should also be marked as connected. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | drm/i915: Add eDP support on IGDNG mobile chipZhenyu Wang2009-07-298-168/+468
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds embedded DisplayPort support on next mobile chip which aims to replace origin LVDS port. VBT's driver feature block has been used to determine the type of current internal panel for eDP or LVDS. Currently no panel fitting support for eDP and backlight control would be added in future. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | drm/i915: enable DisplayPort support on IGDNGZhenyu Wang2009-07-293-21/+157
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | drm/i915: Fix channel ending action for DP aux transactionZhenyu Wang2009-07-291-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We should use current channel 'status' bits to clear DP aux channel's done and error bits, instead of using the channel setting bits, that will set send/busy bit again to initiate new transaction. This also includes also some minor cleanup. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | drm/i915: fix issue in display pipe setup on IGDNGZhenyu Wang2009-07-292-12/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During pipe DPMS off, instead of busy waiting pipe off, insert delays during wait and don't loop after enough tries which matches spec requirement. Also try to match DPMS on path by disable FDI TX PLL in DPMS off. Disable PF by writing PF_WIN_SZ which really trigger the update. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | drm/i915: disable VGA plane reliablyZhenyu Wang2009-07-291-3/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This does VGA disable like DDX driver. SR01 bit 5 should be set before VGA plane disable through control register, otherwise we might get random crash and lockups. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | drm/I915: Fix offset to DVO timings in LVDS dataZhao Yakui2009-07-291-9/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now the DVO timing in LVDS data entry is obtained by using the following step: a. get the entry size for every LVDS panel data b. Get the LVDS fp entry for the preferred panel type c. get the DVO timing by using entry->dvo_timing In our driver the entry->dvo_timing is related with the size of lvds_fp_timing. For example: the size is 46. But it seems that the size of lvds_fp_timing varies on the differnt platform. In such case we will get the incorrect DVO timing entry because of the incorrect DVO offset in LVDS panel data entry. This also removes a hack on new IGDNG to get proper DVO timing. Calculate the DVO timing offset in LVDS data entry to get the DVO timing a. get the DVO timing offset in the LVDS fp data entry by using the pointer definition in LVDS data ptr b. get the LVDS data entry c. get the DVO timing by adding the DVO timing offset to data entry https://bugs.freedesktop.org/show_bug.cgi?id=22787 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Tested-by: Zhenyu Wang <zhenyuw@linux.intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | drm/i915: hdmi detection according by reading edidling.ma@intel.com2009-07-221-60/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to investigations from windows team ,hw team, and our test results on all 4x platofrms available (gm45, g45b, q45, g45a, g45c, g41a, and g41), we find currently Hot plug live status and Hot plug interrupt detection are not reliable, sometime the results from the two approaches are contradicts. So we chose edid detection for hdmi output. Signed-off-by: Ma Ling <ling.ma@intel.com> Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | drm/i915: correct self-refresh calculation in "everything off" caseJesse Barnes2009-07-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If no planes are enabled, the self-refresh calculation may end up doing a divide by zero. This patch should prevent that by making sure at least one of the CRTCs had a valid hdisplay value. Reported-by: Eric Anholt <eric@anholt.net> Tested-by: Eric Anholt <eric@anholt.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | drm/i915: handle FIFO oversubsription correctlyJesse Barnes2009-07-161-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If you're pushing a plane hard (i.e. you need most or all of the FIFO entries just to cover your frame refresh latency), the watermark level may end up being negative. So fix up the signed vs. unsigned math in the calculation function to handle this correctly, giving all available FIFO entries to such a configuration. Reported-by: Eric Anholt <eric@anholt.net> Tested-by: Eric Anholt <eric@anholt.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | drm/i915: FIFO watermark calculation fixesJesse Barnes2009-07-142-75/+113
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I discovered several bugs in the FIFO code that was recently applied. Some of them fell into the "how did this ever work" category, since in some cases we were using the wrong FIFO size values, and the calculations ended up being way off. This patch fixes all the bugs I found, and works well on my GM45, 915GM and 855GM test machines; but as usual with these sorts of patches broader testing is definitely requested (in particular this patch affects 830, 845 and 865 for which I don't have test hardware). Overall, the patch clarifies the watermark calculation function by adding some comments and debug info, and making the variable names a bit clearer. The "get FIFO size" portion of the code has also been corrected, so we should be able to properly detect the FIFO allocations for each pipe, for use in the watermark calculation. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
OpenPOWER on IntegriCloud