summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] i2c: Drop i2c_driver.flags, 1 of 3Jean Delvare2006-01-051-4/+0
| | | | | | | | The I2C_DF_DUMMY flag is gone since 2.5.70, it's about time to drop all ifdef'd out references thereto. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: New vt8231 driverRoger Lucas2006-01-053-0/+874
| | | | | | | | | Port the vt8231 hardware monitoring driver from lm_sensors CVS to Linux 2.6. Signed-off-by: Roger Lucas <roger@planbit.co.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: Add support for Barco LPT->DVI to i2c-parportPeter Korsgaard2006-01-051-1/+11
| | | | | | | | | The following patch adds support for the Barco LPT->DVI I2C adapter to the i2c-parport driver. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: Remove duplicate rtc8564 BCD macrosNicolas Kaiser2006-01-051-19/+17
| | | | | | | | Remove duplicate of BCD macros. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: W83627THF VID fixesYuan Mu2006-01-051-9/+7
| | | | | | | | | This patch fixes the VID reading; no cpu0_vid and vrm files created if the chip is w83627thf and GPIO5 not enabled. Signed-off-by: Yuan Mu <ymu@winbond.com.tw> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Support the VRM 10 mode of the ADT7463Jean Delvare2006-01-051-8/+36
| | | | | | | Support the VRM 10 mode of the ADT7463. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: remove deprecated sysfs names of adm1025 and adm1026Grant Coady2006-01-052-8/+0
| | | | | | | | | | drivers, hwmon, adm1025 and adm1026: remove deprecated sysfs names. these names have been listed for removal for six months, time for them to go Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: Extend ds1337 initializationMichael Burian2006-01-051-6/+31
| | | | | | | | | Add code to handle case where board firmware does not start the RTC. Signed-off-by: Jean Delvare <khali@linux-fr.org> CC: James Chapman <jchapman@katalix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: i2c-i801 explicitly enables/disables PECMark M. Hoffman2006-01-051-5/+1
| | | | | | | | | This patch tweaks i2c-i801.c so that the driver always sets the SMBAUXCTL register (which enables/disables PEC) explicitly before each transaction. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds2006-01-0570-5147/+2399
|\
| * [PATCH] pcmcia: add some IDs for ide-cs and dtl1_csRichard Purdie2006-01-062-0/+5
| | | | | | | | | | | | | | | | Add some PCMCIA device IDs for the microdrive found in the Sharp Zaurus and a different revision of the Socket CF+ Bluetooth card. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] pcmcia: cleanup cs.c, reduce sizeDaniel Ritz2006-01-061-49/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | kill the socket_shutdown()/shutdown_socket() confusion by making it one single function. move cs_socket_put() in there. nicer to read and smaller: original: text data bss dec hex filename 25181 1076 32 26289 66b1 drivers/pcmcia/pcmcia_core.ko patched: text data bss dec hex filename 24973 1076 32 26081 65e1 drivers/pcmcia/pcmcia_core.ko Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] drivers/pcmcia/cistpl.c: fix endian warningsAlexey Dobriyan2006-01-061-15/+15
| | | | | | | | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] pcmcia: kzalloc conversionDominik Brodowski2006-01-069-28/+13
| | | | | | | | | | | | | | Convert users of kmalloc and memset to kzalloc Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] pcmcia: no probing of ioports on PARISCDominik Brodowski2006-01-061-1/+1
| | | | | | | | | | | | | | Do not wildly probe the IO ports we're trying to use on PARISC. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] pcmcia: export stored values in sysfsDominik Brodowski2006-01-061-17/+10
| | | | | | | | | | | | | | | | | | Export the stored values instead of re-reading everything in the socket information sysfs files, and make them accessible to all users, not only to root. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] 8xx PCMCIA: support for MPC885ADS and MPC866ADSVitaly Bordug2006-01-061-6/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | This adds PCMCIA support for both MPC885ADS and MPC866ADS. This is established not together with FADS, because 885 does not have io_block_mapping() for BCSR area. Also, some cleanups done both for 885ADS and MBX. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] m8xx_pcmcia: support MAP_AUTOSZ required for CF cardsVitaly Bordug2006-01-061-2/+1
| | | | | | | | | | | | | | | | | | | | This fixes misconfiguration that could result in odd work of some old CF cards. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] pcmcia: properly handle static mem, but dynamic io socketsDominik Brodowski2006-01-063-2/+107
| | | | | | | | | | | | | | | | | | | | | | | | Some PCMCIA sockets have statically mapped memory windows, but dynamically mapped IO windows. Using the "nonstatic" socket library is inpractical for them, as they do neither need a resource database (as we can trust the kernel resource database on m68k and ppc) nor lots of other features of that library. Let them get a small "iodyn" socket library (105 lines of code) instead. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe ↵Dominik Brodowski2006-01-0645-2225/+467
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | callback Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified probe() callback. As all in-kernel drivers are changed to this new callback, there will be no temporary backwards-compatibility. Inside a probe() function, each driver _must_ set struct pcmcia_device *p_dev->instance and instance->handle correctly. With these patches, the basic driver interface for 16-bit PCMCIA drivers now has the classic four callbacks known also from other buses: int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); int (*suspend) (struct pcmcia_device *dev); int (*resume) (struct pcmcia_device *dev); Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] pcmcia: remove dev_list from driversDominik Brodowski2006-01-0638-651/+78
| | | | | | | | | | | | | | | | The linked list of devices managed by each PCMCIA driver is, in very most cases, unused. Therefore, remove it from many drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] pcmcia: remove old detach mechanismDominik Brodowski2006-01-061-60/+17
| | | | | | | | | | | | | | Remove the old "detach" mechanism as it is unused now. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] pcmcia: unify detach, REMOVAL_EVENT handlers into one remove callbackDominik Brodowski2006-01-0645-896/+368
| | | | | | | | | | | | | | | | Unify the "detach" and REMOVAL_EVENT handlers to one "remove" function. Old functionality is preserved, for the moment. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] pcmcia: merge suspend into device modelDominik Brodowski2006-01-064-11/+100
| | | | | | | | | | | | | | | | | | | | Merge the suspend and resume methods for 16-bit PCMCIA cards into the device model -- for both runtime power management and suspend to ram/disk. Bugfix in ds.c by Richard Purdie Signed-Off-By: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] pcmcia: new suspend coreDominik Brodowski2006-01-0543-991/+1419
| | | | | | | | | | | | | | | | | | | | | | | | | | Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] yenta: make bridge specific init code configurableDaniel Ritz2006-01-053-2/+66
| | | | | | | | | | | | | | | | | | | | | | Make the bridge specific initialization code config options depending on CONFIG_EMBEDDED. Config options for TI/EnE, Toshiba, Ricoh and O2Micro are available. Disabling all of the specific tweaks cuts off more than half of yenta_socket.ko. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] pcmcia: validate_mem fixAndrew Morton2006-01-051-2/+6
| | | | | | | | | | | | | | | | Also return a value if CONFIG_PCMCIA_PROBE is not set. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] pcmcia: validate_mem shouldn't be voidDominik Brodowski2006-01-054-61/+74
| | | | | | | | | | | | | | | | | | Add a return value to pcmcia_validate_mem. Only if we have enough memory available to map the CIS, we should proceed in trying to determine information about the device. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] pcmcia: remove get_socket callbackDominik Brodowski2006-01-0514-606/+0
| | | | | | | | | | | | | | | | The .get_socket callback is never used by the PCMCIA core, therefore remove it. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] yenta: optimize interrupt handlerDaniel Ritz2006-01-051-4/+4
| | | | | | | | | | | | | | | | | | Don't waste cpu time in yenta interrupt handler when the interrupt was for another device. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * [PATCH] pcmcia: avoid macro usage in cistplPavel Machek2006-01-051-3/+3
| | | | | | | | | | | | | | | | Fix macro abuse in pcmcia. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
* | [ATYFB]: Fix onboard video on SPARC Blade 100 for 2.6.{13,14,15}Luis F. Ortiz2006-01-051-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I have recently been switching from using 2.4.32 on my trusty old Sparc Blade 100 to using 2.6.15 . Some of the problems I ran into were distorted video when the console was active (missing first character, skipped dots) and when running X windows (colored snow, stripes, missing pixels). A quick examination of the 2.6 versus 2.4 source for the ATY driver revealed alot of changes. A closer look at the code/data for the 64GR/XL chip revealed two minor "typos" that the rewriter(s) of the code made. The first is a incorrect clock value (230 .vs. 235) and the second is a missing flag (M64F_SDRAM_MAGIC_PLL). Making both these changes seems to have fixed my problem. I tend to think the 235 value is the correct one, as there is a 29.4 Mhz clock crystal close to the video chip and 235.2 (29.4*8) is too close to 235 to make it a coincidence. The flag for M64F_SDRAM_MAGIC_PLL was dropped during the changes made by adaplas in file revision 1.72 on the old bitkeeper repository. The change relating to the clock rate has been there forever, at least in the 2.6 tree. I'm not sure where to look for the old 2.5 tree or if anyone cares when it happened. On SPARC Blades 100's, which use the ATY MACH64GR video chipset, the clock crystal frequency is 235.2 Mhz, not 230 Mhz. The chipset also requires the use of M64F_SDRAM_MAGIC_PLL in order to setup the PLL properly for the DRAM. Signed-off-by: Luis F. Ortiz <lfo@Polyad.Org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds2006-01-0437-295/+451
|\ | | | | | | Trivial manual merge fixup for usb_find_interface clashes.
| * [PATCH] drivers/base/power/runtime.c: #if 0 dpm_set_power_state()Adrian Bunk2006-01-041-0/+2
| | | | | | | | | | | | | | | | This patch #if 0's an unused global function. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] Driver core: only all userspace bind/unbind if CONFIG_HOTPLUG is enabledGreg Kroah-Hartman2006-01-041-4/+22
| | | | | | | | | | | | | | | | | | Thanks to drivers making their id tables __devinit, we can't allow userspace to bind or unbind drivers from devices manually through sysfs. So we only allow this if CONFIG_HOTPLUG is enabled. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] Driver Core: Rearrange exports in platform.cDmitry Torokhov2006-01-041-11/+10
| | | | | | | | | | | | | | | | | | | | | | Driver core: rearrange exports in platform.c The new way is to specify export right after symbol definition. Rearrange exports to follow new style to avoid mixing two styles in one file. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] Driver Core: Add platform_device_del()Dmitry Torokhov2006-01-041-15/+30
| | | | | | | | | | | | | | | | | | | | Driver core: add platform_device_del function Having platform_device_del90 allows more straightforward error handling code in drivers registering platform devices. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] Input: add modalias supportRusty Russell2006-01-041-0/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Here's the patch for modalias support for input classes. It uses comma-separated numbers, and doesn't describe all the potential keys (no module currently cares, and that would make the strings huge). The changes to input.h are to move the definitions needed by file2alias outside __KERNEL__. I chose not to move those definitions to mod_devicetable.h, because there are so many that it might break compile of something else in the kernel. The rest is fairly straightforward. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> CC: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] ide: MODALIAS support for autoloading of ide-cd, ide-disk, ...Kay Sievers2006-01-045-0/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IDE: MODALIAS support for autoloading of ide-cd, ide-disk, ... Add MODULE_ALIAS to IDE midlayer modules: ide-disk, ide-cd, ide-floppy and ide-tape, to autoload these modules depending on the probed media type of the IDE device. It is used by udev and replaces the former agent shell script of the hotplug package, which was required to lookup the media type in the proc filesystem. Using proc was racy, cause the media file is created after the hotplug event is sent out. The module autoloading does not take any effect, until something like the following udev rule is configured: SUBSYSTEM=="ide", ACTION=="add", ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe $env{MODALIAS}" The module ide-scsi will not be autoloaded, cause it requires manual configuration. It can't be, and never was supported for automatic setup in the hotplug package. Adding a MODULE_ALIAS to ide-scsi for all supported media types, would just lead to a default blacklist entry anyway. $ modinfo ide-disk filename: /lib/modules/2.6.15-rc4-g1b0997f5/kernel/drivers/ide/ide-disk.ko description: ATA DISK Driver alias: ide:*m-disk* license: GPL ... $ modprobe -vn ide:m-disk insmod /lib/modules/2.6.15-rc4-g1b0997f5/kernel/drivers/ide/ide-disk.ko $ cat /sys/bus/ide/devices/0.0/modalias ide:m-disk It also adds attributes to the IDE device: $ tree /sys/bus/ide/devices/0.0/ /sys/bus/ide/devices/0.0/ |-- bus -> ../../../../../../../bus/ide |-- drivename |-- media |-- modalias |-- power | |-- state | `-- wakeup `-- uevent $ cat /sys/bus/ide/devices/0.0/{modalias,drivename,media} ide:m-disk hda disk Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] Allow overlapping resources for platform devicesKumar Gala2006-01-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There are cases in which a device's memory mapped registers overlap with another device's memory mapped registers. On several PowerPC devices this occurs for the MDIO bus, whose registers tended to overlap with one of the ethernet controllers. By switching from request_resource to insert_resource we can register the MDIO bus as a proper platform device and not hack around how we handle its memory mapped registers. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] Hold the device's parent's lock during probe and removeAlan Stern2006-01-042-2/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as604) makes the driver core hold a device's parent's lock as well as the device's lock during calls to the probe and remove methods in a driver. This facility is needed by USB device drivers, owing to the peculiar way USB devices work: A device provides multiple interfaces, and drivers are bound to interfaces rather than to devices; Nevertheless a reset, reset-configuration, suspend, or resume affects the entire device and requires the caller to hold the lock for the device, not just a lock for one of the interfaces. Since a USB driver's probe method is always called with the interface lock held, the locking order rules (always lock parent before child) prevent these methods from acquiring the device lock. The solution provided here is to call all probe and remove methods, for all devices (not just USB), with the parent lock already acquired. Although currently only the USB subsystem requires these changes, people have mentioned in prior discussion that the overhead of acquiring an extra semaphore in all the prove/remove sequences is not overly large. Up to now, the USB core has been using its own set of private semaphores. A followup patch will remove them, relying entirely on the device semaphores provided by the driver core. The code paths affected by this patch are: device_add and device_del: The USB core already holds the parent lock, so no actual change is needed. driver_register and driver_unregister: The driver core will now lock both the parent and the device before probing or removing. driver_bind and driver_unbind (in sysfs): These routines will now lock both the parent and the device before binding or unbinding. bus_rescan_devices: The helper routine will lock the parent before probing a device. I have not tested this patch for conflicts with other subsystems. As far as I can see, the only possibility of conflict would lie in the bus_rescan_devices pathway, and it seems pretty remote. Nevertheless, it would be good for this to get a lot of testing in -mm. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] driver kill hotplug word from sn and others fixPaul Jackson2006-01-042-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | The first of these changes s/hotplug/uevent/ was needed to compile sn2_defconfig (ia64/sn). The other three files changed are blind changes of all remaining bus_type.hotplug references I could find to bus_type.uevent. This patch attempts to finish similar changes made in the gregkh-driver-kill-hotplug-word-from-driver-core Nov 22 patch. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] driver core: replace "hotplug" by "uevent"Kay Sievers2006-01-0424-253/+248
| | | | | | | | | | | | | | | | | | Leave the overloaded "hotplug" word to susbsystems which are handling real devices. The driver core does not "plug" anything, it just exports the state to userspace and generates events. Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] merge kobject_uevent and kobject_hotplugKay Sievers2006-01-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The distinction between hotplug and uevent does not make sense these days, netlink events are the default. udev depends entirely on netlink uevents. Only during early boot and in initramfs, /sbin/hotplug is needed. So merge the two functions and provide only one interface without all the options. The netlink layer got a nice generic interface with named slots recently, which is probably a better facility to plug events for subsystem specific events. Also the new poll() interface to /proc/mounts is a nicer way to notify about changes than sending events through the core. The uevents should only be used for driver core related requests to userspace now. Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] remove CONFIG_KOBJECT_UEVENT optionKay Sievers2006-01-042-2/+0
| | | | | | | | | | | | | | | | | | It makes zero sense to have hotplug, but not the netlink events enabled today. Remove this option and merge the kobject_uevent.h header into the kobject.h header file. Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * [PATCH] keep pnpbios usermod_helper away from hotplug_path[]Kay Sievers2006-01-041-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | These days we use udev to manage all kernel events. /proc/sys/kernel/hotplug will usually be disabled by an init-script. pnpnbios is not integrated with the driver core and should stay away from the now disabled /sbin/hotplug. Set the helper to /sbin/phpbios, even when there is probably no current user of this faciliy. If it's needed, it should definitely get proper driver core integration instead of forking binaries from the kernel. Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] Fix IXP4xx watchdog errata workaroundDeepak Saxena2006-01-041-2/+2
| | | | | | | | | | | | | | | | The IXP4xx driver bails out on all A0 CPUs, but it should only do so on IXP42x as IXP46x has functioning HW. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsaLinus Torvalds2006-01-043-19/+131
|\ \
| * | [ALSA] [PATCH] alsa: Improved PnP suspend supportPierre Ossman2006-01-032-24/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also use the PnP functions to start/stop the devices during the suspend so that drivers will not have to duplicate this code. Cc: Adam Belay <ambx1@neo.rr.com> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | [ALSA] PATCH] Add PM support to PnP driversTakashi Iwai2006-01-032-0/+45
| |/ | | | | | | | | | | Add suspend/resume callback to pnp_driver and pnp_card_driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
OpenPOWER on IntegriCloud