summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* ucc_geth: Fix the wrong the Rx/Tx FIFO sizeDave Liu2010-01-061-6/+7
| | | | | | | | | | | | | | | | | | | | | current the Rx/Tx FIFO size settings cause problem when four UEC ethernets work simultaneously. eg: GETH1, UEM-J15, GETH2, UEC-J5 on 8569MDS board $ ifconfig eth0 10.193.20.166 $ ifconfig eth1 10.193.20.167 $ ifconfig eth2 10.193.20.168 then $ ifconfig eth3 10.193.20.169 The fourth ethernet will cause all of interface broken, you cann't ping successfully any more. The patch fix this issue for MPC8569 Rev1.0 and Rev2.0 Signed-off-by: Dave Liu <daveliu@freescale.com> Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb3i: Fix flags test.David S. Miller2010-01-041-1/+1
| | | | | | As noticed by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: fix ethtool link testSucheta Chakraborty2010-01-032-21/+10
| | | | | | | | | o Fix ethtool link test for NX3031 chip. o Remove unused code from phy interrupt callback Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: fix ethtool register dumpSucheta Chakraborty2010-01-031-111/+59
| | | | | | | | | o Dump registers such as tx ring and rx ring counter, firmware state, niu regs, etc. which can be useful for debugging purpose. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* rrunner: fix buffer overflowDan Carpenter2010-01-031-1/+1
| | | | | | | | | | | | tx_skbuff is define as: struct sk_buff *tx_skbuff[TX_RING_ENTRIES]; EVT_RING_ENTRIES is 64 and TX_RING_ENTRIES is 32. This function is in a error path so that's why it wasn't noticed. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* broadcom: Fix &&/|| confusion in bcm54xx_adjust_rxrefclk()roel kluin2010-01-031-2/+2
| | | | | | | This always evaluates to true. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Test off by one in sh_eth_reset()roel kluin2010-01-031-1/+1
| | | | | | | If no break occurred, cnt reaches 0 after the loop. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* niu: timeout ignored in tcam_wait_bit()roel kluin2010-01-031-1/+1
| | | | | | | | With `while (--limit > 0)' i reaches 0 after the loop, so upon timeout the error was not returned. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atarilance: timeout ignored in lance_open()roel kluin2010-01-031-1/+1
| | | | | | | | With `while (--i > 0)' i reaches 0 after the loop, so upon timeout the error was not issued. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net : Correct the size argument to kzallocJulia Lawall2010-01-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | lp->rx_skb has type struct sk_buff **, not struct sk_buff *, so the elements of the array should have pointer type, not structure type. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @disable sizeof_type_expr@ type T; T **x; @@ x = <+...sizeof( - T + *x )...+> // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb3i: Fix a login over vlan issueRakesh Ranjan2010-01-031-1/+33
| | | | | | | | | Fix a target login issue, when parent interface is vlan and we are using cxgb3i sepecific private ip address in '/etc/iscsi/ifaces/' iface file. Acked-by: Karen Xie <kxie@chelsio.com> Signed-off-by: Rakesh Ranjan <rakesh@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* hamradio: avoid null deref v3Dan Carpenter2010-01-031-1/+3
| | | | | | | | | This should address the problems in version 1 (lazy) and version 2 (ugly). Bump the stats on orig_dev not on the newly assigned NULL dev variable. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* usbnet: test off by oneroel kluin2010-01-031-2/+2
| | | | | | | | With `while (i++ < MII_TIMEOUT)' i reaches MII_TIMEOUT + 1 after the loop This is probably unlikely a problem in practice. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/can: Correct NULL testJulia Lawall2010-01-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Test the just-allocated value for NULL rather than some other value. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,y; statement S; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ( if ((x) == NULL) S | if ( - y + x == NULL) S ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/isdn: eliminate duplicated testJulia Lawall2010-01-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | The code checked slot_rx twice. Check slot_tx by analogy with the bank case. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E; @@ ( *E && E | *E || E ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* via-velocity: Give RX descriptors to the NIC later on open or MTU changeBen Hutchings2010-01-031-4/+4
| | | | | | | | | | | | | | | | | | velocity_open() calls velocity_give_many_rx_descs(), which gives RX descriptors to the NIC, before installing an interrupt handler or calling velocity_init_registers(). I think this is very unsafe and it appears to explain the bug report <http://bugs.debian.org/508527>. On MTU change, velocity_give_many_rx_descs() is again called before velocity_init_registers(). I'm not sure whether this is unsafe but it does look wrong. Therefore, move the calls to velocity_give_many_rx_descs() after request_irq() and velocity_init_registers(). Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Tested-by: Jan Ceuleers <jan.ceuleers@computer.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* fsl_pq_mdio: Fix iomem unmapping for non-eTSEC2.0 controllersAnton Vorontsov2009-12-301-7/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We use a rather complicated logic to support eTSEC and eTSEC2.0 registers maps in a single driver. Currently, the code tries to unmap 'regs', but for non-eTSEC2.0 controllers 'regs' doesn't point to a mapping start, and this might cause badness on probe failure or module removal: Freescale PowerQUICC MII Bus: probed Trying to vfree() nonexistent vm area (e107f000) ------------[ cut here ]------------ Badness at c00a7754 [verbose debug info unavailable] NIP: c00a7754 LR: c00a7754 CTR: c02231ec [...] NIP [c00a7754] __vunmap+0xec/0xf4 LR [c00a7754] __vunmap+0xec/0xf4 Call Trace: [df827e50] [c00a7754] __vunmap+0xec/0xf4 (unreliable) [df827e70] [c001519c] iounmap+0x44/0x54 [df827e80] [c028b924] fsl_pq_mdio_probe+0x1cc/0x2fc [df827eb0] [c02fb9b4] of_platform_device_probe+0x5c/0x84 [df827ed0] [c0229928] really_probe+0x78/0x1a8 [df827ef0] [c0229b20] __driver_attach+0xa4/0xa8 Fix this by introducing a proper priv structure (finally!), which now holds 'regs' and 'map' fields separately. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ucc_geth: Fix netdev watchdog triggering on suspendAnton Vorontsov2009-12-301-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Sometimes ucc_geth fails to suspend with the following trace: ucc_geth e0103000.ucc: suspend ucc_geth e0102000.ucc: suspend NETDEV WATCHDOG: eth0 (ucc_geth): transmit queue 0 timed out ------------[ cut here ]------------ Badness at net/sched/sch_generic.c:255 NIP: c021cb5c LR: c021cb5c CTR: c01ab4b4 [...] NIP [c021cb5c] dev_watchdog+0x298/0x2a8 LR [c021cb5c] dev_watchdog+0x298/0x2a8 Call Trace: [c0389da0] [c021cb5c] dev_watchdog+0x298/0x2a8 (unreliable) [c0389e00] [c0031ed8] run_timer_softirq+0x16c/0x1dc [c0389e50] [c002c638] __do_softirq+0xa4/0x11c [...] This patch fixes the issue by properly detaching the device on suspend, and attaching it back on resume. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phylib: Properly reinitialize PHYs after hibernationAnton Vorontsov2009-12-302-22/+58
| | | | | | | | | | | | Since hibernation assumes power loss, we should fully reinitialize PHYs (including platform fixups), as if PHYs were just attached. This patch factors phy_init_hw() out of phy_attach_direct(), then converts mdio_bus to dev_pm_ops and adds an appropriate restore() callback. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phylib: Fix deadlock on resumeAnton Vorontsov2009-12-301-2/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sometimes kernel hangs on resume with the following trace: ucc_geth e0102000.ucc: resume INFO: task bash:1764 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. bash D 0fecf43c 0 1764 1763 0x00000000 Call Trace: [cf9a7c10] [c0012868] ret_from_except+0x0/0x14 (unreliable) --- Exception: cf9a7ce0 at __switch_to+0x4c/0x6c LR = 0xcf9a7cc0 [cf9a7cd0] [c0008c14] __switch_to+0x4c/0x6c (unreliable) [cf9a7ce0] [c028bcfc] schedule+0x158/0x260 [cf9a7d10] [c028c720] __mutex_lock_slowpath+0x80/0xd8 [cf9a7d40] [c01cf388] phy_stop+0x20/0x70 [cf9a7d50] [c01d514c] ugeth_resume+0x6c/0x13c [...] Here is why. On suspend: - PM core starts suspending devices, ucc_geth_suspend gets called; - ucc_geth calls phy_stop() on suspend. Note that phy_stop() is mostly asynchronous so it doesn't block ucc_geth's suspend routine, it just sets PHY_HALTED state and disables PHY's interrupts; - Suddenly the state machine gets scheduled, it grabs the phydev->lock mutex and tries to process the PHY_HALTED state, so it calls phydev->adjust_link(phydev->attached_dev). In ucc_geth case adjust_link() calls msleep(), which reschedules the code flow back to PM core, which now finishes suspend and so we end up sleeping with phydev->lock mutex held. On resume: - PM core starts resuming devices (notice that nobody rescheduled the state machine yet, so the mutex is still held), the core calls ucc_geth's resume routine; - ucc_geth_resume restarts the PHY with phy_stop()/phy_start() sequence, and the phy_*() calls are trying to grab the phydev->lock mutex. Here comes the deadlock. This patch fixes the issue by stopping the state machine on suspend and starting it again on resume. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-12-2923-441/+89
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| * Revert "b43: Enforce DMA descriptor memory constraints"John W. Linville2009-12-292-158/+46
| | | | | | | | | | | | | | | | | | | | | | This reverts commit 9bd568a50c446433038dec2a5186c5c57c3dbd23. That commit is shown to cause allocation failures during initialization on some machines. http://bugzilla.kernel.org/show_bug.cgi?id=14844 Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwmc3200wifi: fix array out-of-boundary accessZhu Yi2009-12-281-1/+1
| | | | | | | | | | | | | | | | | | Allocate priv->rx_packets[IWM_RX_ID_HASH + 1] because the max array index is IWM_RX_ID_HASH according to IWM_RX_ID_GET_HASH(). Cc: stable@kernel.org Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1251: timeout one too soon in wl1251_boot_run_firmware()Roel Kluin2009-12-281-1/+1
| | | | | | | | | | | | | | | | | | | | `loop' reaches INIT_LOOP + 1 after the loop. so if ACX_INTR_INIT_COMPLETE occurs in the last iteration the write occurs but also the error out as if a timeout occurred. This is probably very unlikely to ever occur. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: fix missed error codes in the tx status checkFelix Fietkau2009-12-282-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | My previous change added in: commit 815833e7ecf0b9a017315cae6aef4d7cd9517681 ath9k: fix tx status reporting was not checking all possible tx error conditions. This could possibly lead to throughput issues due to slow rate control adaption or missed retransmissions of failed A-MPDU frames. This patch adds a mask for all possible error conditions and uses it in the xmit ok check. Cc: stable@kernel.org Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: wake hardware during AMPDU TX actionsLuis R. Rodriguez2009-12-281-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | AMDPDU actions poke hardware for TX operation, as such we want to turn hardware on for these actions. AMDPU RX operations do not require hardware on as nothing is done in hardware for those actions. Without this we cannot guarantee hardware has been programmed correctly for each AMPDU TX action. Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: wake hardware for interface IBSS/AP/Mesh removalLuis R. Rodriguez2009-12-281-0/+2
| | | | | | | | | | | | | | | | | | | | | | When we remove a IBSS/AP/Mesh interface we stop DMA but to do this we should ensure hardware is on. Awaken the device prior to these calls. This should ensure DMA is stopped upon suspend and plain device removal. Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: fix suspend by waking device prior to stopSujith2009-12-281-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | Ensure the device is awake prior to trying to tell hardware to stop it. Impact of not doing this is we can likely leave the device in an undefined state likely causing issues with suspend and resume. This patch ensures harware is where it should be prior to suspend. Cc: stable@kernel.org Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271_cmd.c: cleanup char => u8Dan Carpenter2009-12-281-2/+2
| | | | | | | | | | | | | | | | | | This is just a clean up and doesn't make a functional difference. It keeps the lint checkers happy. Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: Storage class should be before const qualifierTobias Klauser2009-12-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: Storage class should be before const qualifierTobias Klauser2009-12-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wireless: remove remaining qual codeJohannes Berg2009-12-2810-255/+4
| | | | | | | | | | | | | | | | This removes the remaining users of the rx status 'qual' field and the field itself. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: Add USB ID for Linksys WUSB 600N rev 2.Gertjan van Wingerde2009-12-281-0/+1
| | | | | | | | | | | | | | | | This is a rt2870 based device. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath5k: fix SWI calibration interrupt stormBob Copeland2009-12-281-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The calibration period is now invoked by triggering a software interrupt from within the ISR by ath5k_hw_calibration_poll() instead of via a timer. However, the calibration interval isn't initialized before interrupts are enabled, so we can have a situation where an interrupt occurs before the interval is assigned, so the interval is actually negative. As a result, the ISR will arm a software interrupt to schedule the tasklet, and then rearm it when the SWI is processed, and so on, leading to a softlockup at modprobe time. Move the initialization order around so the calibration interval is set before interrupts are active. Another possible fix is to schedule the tasklet directly from the poll routine, but I think there are additional plans for the SWI. Signed-off-by: Bob Copeland <me@bobcopeland.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * libertas: Remove carrier signaling from the scan codeSamuel Ortiz2009-12-281-14/+8
| | | | | | | | | | | | | | | | | | There is no reason to signal a carrier off when doing a 802.11 scan. Cc: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * orinoco: fix GFP_KERNEL in orinoco_set_key with interrupts disabledAndrey Borzenkov2009-12-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | orinoco_set_key is called from two places both with interrupts disabled (under orinoco_lock). Use GFP_ATOMIC instead of GFP_KERNEL. Fixes following warning: [ 77.254109] WARNING: at /home/bor/src/linux-git/kernel/lockdep.c:2465 lockdep_trace_alloc+0x9a/0xa0() [ 77.254109] Hardware name: PORTEGE 4000 [ 77.254109] Modules linked in: af_packet irnet ppp_generic slhc ircomm_tty ircomm binfmt_misc dm_mirror dm_region_hash dm_log dm_round_robin dm_multipath dm_mod loop nvram toshiba cryptomgr aead pcompress crypto_blkcipher michael_mic crypto_hash crypto_algapi orinoco_cs orinoco cfg80211 smsc_ircc2 pcmcia irda toshiba_acpi yenta_socket video i2c_ali1535 backlight rsrc_nonstatic ali_agp pcmcia_core psmouse output crc_ccitt i2c_core alim1535_wdt rfkill sg evdev ohci_hcd agpgart usbcore pata_ali libata reiserfs [last unloaded: scsi_wait_scan] [ 77.254109] Pid: 2296, comm: wpa_supplicant Not tainted 2.6.32-1avb #1 [ 77.254109] Call Trace: [ 77.254109] [<c011f0ad>] warn_slowpath_common+0x6d/0xa0 [ 77.254109] [<c014206a>] ? lockdep_trace_alloc+0x9a/0xa0 [ 77.254109] [<c014206a>] ? lockdep_trace_alloc+0x9a/0xa0 [ 77.254109] [<c011f0f5>] warn_slowpath_null+0x15/0x20 [ 77.254109] [<c014206a>] lockdep_trace_alloc+0x9a/0xa0 [ 77.254109] [<c018d296>] __kmalloc+0x36/0x130 [ 77.254109] [<dffcb6a8>] ? orinoco_set_key+0x48/0x1c0 [orinoco] [ 77.254109] [<dffcb6a8>] orinoco_set_key+0x48/0x1c0 [orinoco] [ 77.254109] [<dffcb9fc>] orinoco_ioctl_set_encodeext+0x1dc/0x2d0 [orinoco] [ 77.254109] [<c035b117>] ioctl_standard_call+0x207/0x3b0 [ 77.254109] [<dffcb820>] ? orinoco_ioctl_set_encodeext+0x0/0x2d0 [orinoco] [ 77.254109] [<c0307f1f>] ? rtnl_lock+0xf/0x20 [ 77.254109] [<c0307f1f>] ? rtnl_lock+0xf/0x20 [ 77.254109] [<c02fb115>] ? __dev_get_by_name+0x85/0xb0 [ 77.254109] [<c035b616>] wext_handle_ioctl+0x176/0x200 [ 77.254109] [<dffcb820>] ? orinoco_ioctl_set_encodeext+0x0/0x2d0 [orinoco] [ 77.254109] [<c030020f>] dev_ioctl+0x6af/0x730 [ 77.254109] [<c02eec65>] ? move_addr_to_kernel+0x55/0x60 [ 77.254109] [<c02eed59>] ? sys_sendto+0xe9/0x130 [ 77.254109] [<c02ed77e>] sock_ioctl+0x7e/0x250 [ 77.254109] [<c02ed700>] ? sock_ioctl+0x0/0x250 [ 77.254109] [<c019cf4c>] vfs_ioctl+0x1c/0x70 [ 77.254109] [<c019d1fa>] do_vfs_ioctl+0x6a/0x590 [ 77.254109] [<c0178e50>] ? might_fault+0x90/0xa0 [ 77.254109] [<c0178e0a>] ? might_fault+0x4a/0xa0 [ 77.254109] [<c02ef90e>] ? sys_socketcall+0x17e/0x280 [ 77.254109] [<c019d759>] sys_ioctl+0x39/0x60 [ 77.254109] [<c0102e3b>] sysenter_do_call+0x12/0x32 [ 77.254109] ---[ end trace 95ef563548d21efd ]--- Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | bond_3ad.c avoid possible null derefDan Carpenter2009-12-261-1/+1
| | | | | | | | | | | | | | | | A few lines earlier we assume that best->slave could be either null or non-null so we should check it here as well. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Fix MAC address access in 3c507, ibmlana, pcnet32 and libertasDaniel Drake2009-12-264-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit f001fde5eadd915f4858d22ed70d7040f48767cf changed net_device.dev_addr from a 32-byte array to a pointer. I found 4 ethernet drivers which rely on sizeof(dev_addr), which are now only copying 4 bytes of the address information on 32bit systems. Fix them to use ETH_ALEN. Signed-off-by: Daniel Drake <dsd@laptop.org> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | gianfar: Fix gianfar select_queue bogositySandeep Gopalpet2009-12-261-9/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The gfar_select_queue() function was used to set queue mapping only for forwarding/bridging applications and the condition for locally generated packets was completely ignored. The solution is to remove the gfar_select_queue() function and use skb_record_rx_queue to set queue mapping for forwarding/bridging applications. This will ensure that in case of forwarding/bridging applications txq = rxq will be selected and skb_tx_hash will be used to pick up a txq for locally generated packets. Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tun: use tun_sk instead container_ofVitaliy Gusev2009-12-261-3/+3
| | | | | | | | | | | | | | | | Using macro tun_sk is more clear and shorter. However tun.c has tun_sk, but doesn't use it. Signed-off-by: Vitaliy Gusev <vgusev@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ucc_geth: Don't needlessly change MAC settings in adjust_link()Anton Vorontsov2009-12-261-15/+18
| | | | | | | | | | | | | | | | | | | | | | | | If PHY doesn't have an IRQ, phylib would poll for link changes, and would call adjust_link() every second. In that case we disable and enable the controller every second. Let's better check if there is actually anything changed, and, if so, change the MAC settings. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ucc_geth: Fix netdev watchdog triggering on link changesAnton Vorontsov2009-12-261-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 864fdf884e82bacbe8ca5e93bd43393a61d2e2b4 ("ucc_geth: Fix hangs after switching from full to half duplex") ucc_geth driver disables the controller during MAC configuration changes. Though, disabling the controller might take quite awhile, and so the netdev watchdog might get upset: NETDEV WATCHDOG: eth2 (ucc_geth): transmit queue 0 timed out ------------[ cut here ]------------ Badness at c02729a8 [verbose debug info unavailable] NIP: c02729a8 LR: c02729a8 CTR: c01b6088 REGS: c0451c40 TRAP: 0700 Not tainted (2.6.32-trunk-8360e) [...] NIP [c02729a8] dev_watchdog+0x280/0x290 LR [c02729a8] dev_watchdog+0x280/0x290 Call Trace: [c0451cf0] [c02729a8] dev_watchdog+0x280/0x290 (unreliable) [c0451d50] [c00377c4] run_timer_softirq+0x164/0x224 [c0451da0] [c0032a38] __do_softirq+0xb8/0x13c [c0451df0] [c00065cc] do_softirq+0xa0/0xac [c0451e00] [c003280c] irq_exit+0x7c/0x9c [c0451e10] [c00640c4] __ipipe_sync_stage+0x248/0x24c [...] This patch fixes the issue by detaching the netdev during the time we change the configuration. Reported-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Tested-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca> Cc: Stable <stable@vger.kernel.org> [2.6.32] Signed-off-by: David S. Miller <davem@davemloft.net>
* | ucc_geth: Fix empty TX queue processingAnton Vorontsov2009-12-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following oops was seen with the ucc_geth driver: Unable to handle kernel paging request for data at address 0x00000058 Faulting instruction address: 0xc024f2fc Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c024f2fc] skb_recycle_check+0x14/0x100 LR [e30aa0a4] ucc_geth_poll+0xd8/0x4e0 [ucc_geth_driver] Call Trace: [df857d50] [c000b03c] __ipipe_grab_irq+0x3c/0xa4 (unreliable) [df857d60] [e30aa0a4] ucc_geth_poll+0xd8/0x4e0 [ucc_geth_driver] [df857dd0] [c0258cf8] net_rx_action+0xf8/0x1b8 [df857e10] [c0032a38] __do_softirq+0xb8/0x13c [df857e60] [c00065cc] do_softirq+0xa0/0xac [...] This is because ucc_geth_tx() tries to process an empty queue when queues are logically stopped. Stopping the queues doesn't disable polling, and since nowadays ucc_geth_tx() is actually called from the polling routine, the oops above might pop up. Fix this by removing 'netif_queue_stopped() == 0' check. Reported-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Tested-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca> Cc: Stable <stable@vger.kernel.org> [2.6.32] Signed-off-by: David S. Miller <davem@davemloft.net>
* | vxge: use DMA_BIT_MASK instead of plain values.Denis Kirjanov2009-12-251-3/+3
| | | | | | | | | | | | | | Use DMA_BIT_MASK instead of plain values. Signed-off-by: Denis Kirjanov <kirjanov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: Initialize cnic status block during chip resetMichael Chan2009-12-251-0/+2
| | | | | | | | | | | | | | | | | | | | When the device is reset during MTU change, ring size change, or self test, etc, the cnic status block needs to be properly initialized if cnic is registered. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/via-rhine: Fix scheduling while atomic bugsJarek Poplawski2009-12-231-13/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are BUGs "scheduling while atomic" triggered by the timer rhine_tx_timeout(). They are caused by calling napi_disable() (with msleep()). This patch fixes it by moving most of the timer content to the workqueue function (similarly to other drivers, like tg3), with spin_lock() changed to BH version. Additionally, there is spin_lock_irq() moved in rhine_close() to exclude napi_disable() etc., also tg3's way. Reported-by: Andrey Rahmatullin <wrar@altlinux.org> Tested-by: Andrey Rahmatullin <wrar@altlinux.org> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ixgbe: fix Need to call pci_save_state after pci_restore_stateDon Skidmore2009-12-231-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a pci_save_state() call in ixgbe_resume() after pci_restore_state(). A similar change was made in ixgbe_io_slot_reset() that accommodates pci_restore_state() new behavior. This change makes pci_restore_state() clear the saved_state flag This is necessary due to a resent kernel change to pci_restore_state() so that it now clears the saved_state flag of the device right after the device.s standard configuration registers have been poplulated with the previously saved values. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | be2net: Bug fix to return correct values in ethtool get_settings.Sarveshwar Bandi2009-12-232-9/+32
| | | | | | | | | | | | | | | | Changes to return correct values for transceiver and supported in ethtool get_settings function. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | be2net: Bug fix to config NIC appropriately before loopback testSarveshwar Bandi2009-12-233-14/+74
| | | | | | | | | | | | | | | | NIC controller has to be set to an appropriate mode before doing a loopback test. Test will fail otherwise. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | be2net: Bug fix to avoid soft lockup in loopback test.Sarveshwar Bandi2009-12-231-0/+1
| | | | | | | | | | | | | | | | | | This change ensures that loopback test command gives up after 4 seconds when the hardware is not responsive. This could happen if the ports are connected properly in loopback mode. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud