summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] fbdev: Sanitize ->fb_ioctl prototypeChristoph Hellwig2006-01-1426-105/+63
| | | | | | | | | | | The ioctl and file arguments to ->fb_mmap are totally unused and there's not reason a driver should need them. Also update the ->fb_compat_ioctl prototype to be the same as ->fb_mmap. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] gx1fb: (try to) play nicer with various BIOSesDavid Vrabel2006-01-141-7/+4
| | | | | | | | | | | | | | | | | | | | | Seems that the CS5530A chip used in Geode GX1 systems has some crazy feature that causes SMI traps when accessing the PCI configuration space of the video device. Various GX1 BIOSes seem to use this 'feature' to hide the real BARs of the device. This patch disables these traps (in an early PCI fixup) so that Linux sees the real, physical BARs and not the virtual ones provided by the BIOS. This should allow the GX1 framebuffer driver to work on more systems that have different BIOSes as the driver no longer guesses at what the virtual BARs mean. I'm not entirely sure it the correct solution as I can neither test regular VGA console nor the X's 'cyrix' video driver so there might be some breakage there -- probably best to get some more testers before applying it. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] neofb: take existing display configuration as defaultChristian Trefzer2006-01-141-1/+1
| | | | | | | | | | | | | | | | | | | | On a Dell Latitude CPi-A I noticed a strangeness wrt. the handling of an external monitor by the neomagic framebuffer driver, namely when the laptop is docked in a C/Dock II with the lid shut. A cold boot would result in the BIOS configuring the video chip to use the "external monitor only" mode, yet neofb would default to "internal LCD only". An attempt for a quick fix by using the Fn-F8 keystroke to toggle the display combination modes resulted in a reproductible hard lock, powering down being the only solution. The attached patch makes neofb probe the register for the current display mode, using that value as a default if nothing was specified as kernel/module parameter. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cs89x0: add ixdp2351 supportDeepak Saxena2006-01-142-6/+25
| | | | | | | | This patch adds support for the Intel IXDP2351 to the CS89x0 driver. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cs89x0: use u16 for device register dataLennert Buytenhek2006-01-141-19/+19
| | | | | | | | | | cs89x0 inconsistently used 'int' and 'u32' for device register data. As the cs89x0 is a 16-bit chip, change the I/O accessors over to 'u16'. (Spotted by Deepak Saxena.) Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cs89x0: use #elif instead of #else/#if/#endifLennert Buytenhek2006-01-141-3/+1
| | | | | | Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cs89x0: credit Dmitry PervushinLennert Buytenhek2006-01-141-0/+3
| | | | | | | | Credit Dmitry Pervushin for the PNX010X platform support. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dell_rbu: fix Bug 5854Abhay Salunke2006-01-141-22/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes http://bugzilla.kernel.org/show_bug.cgi?id=5854 Root cause: The dell_rbu driver creates entries in /sys/class/firmware/dell_rbu/ by calling request_firmware_nowait (without hotplug ) this function inturn starts a kernel thread which creates the entries in /sys/class/firmware/dell_rbu/loading , data and the thread waits on the user action to return control back to the callback fucntion of dell_rbu. The thread calls wait_on_completion which puts it in a D state until the user action happens. If there is no user action happening the load average goes up as the thread D state is taken in to account. Also after downloading the BIOS image the enrties go away momentarily but they are recreated from the callback function in dell_rbu. This causes the thread to get recreated causing the load average to permenently stay around 1. Fix: The dell_rbu also creates the entry /sys/devices/platform/dell_rbu/image_type at driver load time. The image type by default is mono if required the user can echo packet to image_type to make the BIOS update mechanism using packets. Also by echoing init in to image_type the /sys/class/firmware/dell_rbu entries can be created. The driver code was changed to not create /sys/class/firmware/dell_rbu entries during load time, and also to not create the above entries from the callback function. The entries are only created by echoing init to /sys/devices/platform/dell_rbu/image_type The user now needs to create the entries to download the image monolithic or packet. This fixes the issue since the kernel thread only is created when ever the user is ready to download the BIOS image; this minimizes the life span of the kernel thread and the load average goes back to normal. Signed off by Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] s390: fix blk_queue_ordered call in dasd.c fixupHeiko Carstens2006-01-141-1/+1
| | | | | | | | | The QUEUE_ORDERED_* numbers got renumbered and by accident the dasd driver was changed to use QUEUE_ORDERED_DRAIN instead of QUEUE_ORDERED_TAG. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] s390: email-address changeCornelia Huck2006-01-1417-34/+35
| | | | | | | Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] s390: chps[] array too shortCornelia Huck2006-01-141-1/+1
| | | | | | | | | | | | The chps[] array in struct channel_subsystem is one too short; therefore the code doesn't realize the chpid ff is already known. When several devices on chpid ff become available, the message "new_channel_path: could not register ff" is displayed for every device but the first one. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] s390: fix blk_queue_ordered call in dasdcMartin Schwidefsky2006-01-141-1/+1
| | | | | | | | | Add the missing third argument to the blk_queue_ordered call and use the constant QUEUE_ORDERED_DRAIN instead of "1". Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] powerpc: Add support for the MPC83xx watchdogKumar Gala2006-01-143-0/+234
| | | | | | | | | | | | | | | Add support for the PowerPC MPC83xx watchdog. The MPC83xx has a simple watchdog that once enabled it can not be stopped, has some simple timeout range selection, and the ability to either reset the processor or take a machine check. Signed-off-by: Dave Updegraff <dave@cray.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Watchdog: Winsystems EPX-C3 SBCCalin A. Culianu2006-01-143-0/+239
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a 2.6 patch that adds support for the watchdog timer built into the EPX-C3 single board computer manufactured by Winsystems, Inc. Driver details: This is for x86 only. This watchdog is pretty basic and simple. It is only configurable via jumpers on the SBC, and it only has either a 1.5s or 200s interval. The watchdog can either be auto-configured to start as soon as the machine powers up (bad idea for the 1.5s interval!) or it can be enabled and disabled by writing to io port 0x1ee. Petting the watchdog involves writing any value to io port 0x1ef. The only unfortunate thing about this watchdog (and it is not at all uncommmon in watchdogs that linux supports) is that it is not a PCI or ISA-PNP device and as such it isn't at all probeable. Either the watchdog exists as 2 bytes at 0x1ee, or it doesn't. Thus, using this driver on a machine that doesn't have that watchdog can potentially hang/crash the system, etc. So only use this driver if you in fact are on a Winsystems EPX-C3 SBC. Anyway this driver fits into the already-existing watchdog framework quite nicely and I already tested it on my EPX-C3 and it works like a charm. Signed-off-by: Calin A. Culianu <calin@ajvar.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Unlinline a bunch of other functionsArjan van de Ven2006-01-1444-141/+140
| | | | | | | | | | | Remove the "inline" keyword from a bunch of big functions in the kernel with the goal of shrinking it by 30kb to 40kb Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Altix: ioc3 serial supportPatrick Gefre2006-01-146-1/+3072
| | | | | | | | | | | | | | | Add driver support for a 2 port PCI IOC3-based serial card on Altix boxes: This is a re-submission. On the original submission I was asked to organize the code so that the MIPS ioc3 ethernet and serial parts could be used with this driver. Stanislaw Skowronek was kind enough to provide the shim layer for this - thanks Stanislaw. This patch includes the shim layer and the Altix PCI ioc3 serial driver. The MIPS merged ioc3 ethernet and serial support is forthcoming. Signed-off-by: Patrick Gefre <pfg@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2006-01-1492-3220/+4910
|\
| * [SCSI] qla2xxx: Update version number to 8.01.04-k.andrew.vasquez@qlogic.com2006-01-141-2/+2
| | | | | | | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: Disable port-type RSCN handling via driver state-machine.andrew.vasquez@qlogic.com2006-01-144-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Given the semantic changes in both the device-model and fc-transport APIs, the driver's handling of port-type RSCNs via a series of ADISCs and PLOGIs can cause series of badness ranging from unexpectedly device loss to devices not being discovered. In the interim, disable (via a module-parameter) this feature and allow RSCN management to continue to occur within the driver's DPC thread. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: Kconfig update: Add URL to download firmware images.andrew.vasquez@qlogic.com2006-01-141-0/+4
| | | | | | | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: Correct setting of FDMI supported/current port speed.andrew.vasquez@qlogic.com2006-01-141-5/+2
| | | | | | | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: Correct execution-throttle setting for ISP24xx.andrew.vasquez@qlogic.com2006-01-141-0/+2
| | | | | | | | | | | | | | | | | | Similarly to other ISPs, set execution throttle to maximum allowed value since 'throttling' is done on a per-lun basis via queue-depth. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: Collapse load RISC RAM implementations.andrew.vasquez@qlogic.com2006-01-143-101/+15
| | | | | | | | | | | | | | | | Simplify essentially duplicate load RISC RAM implementation in qla2x00_load_ram_ext() and qla2x00_load_ram(). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: Correct swing/emphasis settings for ISP24XX.andrew.vasquez@qlogic.com2006-01-141-3/+5
| | | | | | | | | | | | | | | | | | Swing/emphasis settings in NVRAM were not being honoured due to the driver not converting the serial-link options from LE to host-endian format. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: Correct issue where portstate does not transition during ↵andrew.vasquez@qlogic.com2006-01-141-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | loop-resync. If the Get Port Database call fails during local-loop update, then schedule the DPC routine to perform a rescan as the firmware would have updated the Get ID List port-entries of their new state. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: Update firmware-dump procedure for ISP24xx.andrew.vasquez@qlogic.com2006-01-142-54/+55
| | | | | | | | | | | | | | | | Small changes to register retrieval and order as per latest firmware specification. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: Re-enable flash-part write protection on ISP24xx boards.andrew.vasquez@qlogic.com2006-01-141-0/+3
| | | | | | | | | | | | | | | | Driver would not correctly re-enable the write-protection bits of the flash part after updates. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: Correct excessive delay during LOAD-RISC-RAM mailbox command.andrew.vasquez@qlogic.com2006-01-141-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem report (against 2.4.x driver) from Jeff Layton <jlayton@redhat.com>: An OEM noticed that the U6 qla2200 driver would hang for around 2 minutes at boot time and then proceed normally. I found that the delay was occurring when loading the new firmware into the card, and was due to a schedule_timeout(10) added to the bottom of the polling loop. Some testing showed that the load ram operation on the card was very quick (on the order of a couple of jiffies), but the sleep in the polling loop was making each operation take around 25-30. The attached patch corrects this by making it skip sleeping during the load ram operation, since I believe we only do that when the module is plugged in. It also skips sleeping if the mbox_int flag got set during the current loop. This corrected the hang on my test setup, and OEM also confirmed that it corrected the problem for them. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: Use msleep() as delay during ISP polling.andrew.vasquez@qlogic.com2006-01-141-1/+1
| | | | | | | | | | | | | | | | | | | | Mailbox commands are polled for completion during ISP initialization. During potentially 'long' mailbox commands (i.e. fabric login), we really don't want a busy-wait delay to potentially trigger a (benign) soft-lockup BUG(). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: Drop noisy 'UNDERRUN' status message.andrew.vasquez@qlogic.com2006-01-141-5/+6
| | | | | | | | | | | | | | | | | | There's no point in displaying the message during a valid underrun case. Limit the message to potentially problematic cases. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: Correct FC4 feature assignment during RFF_ID.andrew.vasquez@qlogic.com2006-01-141-0/+1
| | | | | | | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: Reference proper node/port names in fc_host class.andrew.vasquez@qlogic.com2006-01-141-2/+2
| | | | | | | | | | | | | | | | | | | | The initial-control-block references are not always correct as the use-node-name qualifier during NVRAM configuration will cause the firmware to use the portname as a base for the nodename. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] iscsi: use pageslabMike Christie2006-01-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From: FUJITA Tomonori <tomof@acm.org> and zhenyu.z.wang@intel.com: We cannot handle filesystems like XFS becuase of the pages they are sending us. We had thought page_count could be used to work around this, but the correct test is for PageSlab. The proper solution is to figure out what type of pages filesystems can use so we do not have to add tests like this or handle it in the block layer for all network block drivers but the issue still has not been resolved on fs-devel so we are sending this patch as a temporary fix. This is last patch just in case it is Nakd with the explanation that we need to push the correct fix through fs-devel, mm or the block layer. The rest of the patchset can live without the patch, but the driver will not work with filesystems like XFS. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] iscsi: fix 4k stack iscsi setupsMike Christie2006-01-142-14/+6
| | | | | | | | | | | | | | | | | | | | | | | | When we run the xmit code from queuecomand the stack trace gets too deep. The patch runs the xmit code from the scsi_host work queue. This fixes 4k stack and xfs support and should fix the st and sg stack usage bugs. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] iscsi: seperate iscsi interface from setup functionsMike Christie2006-01-142-453/+510
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the second version of the patch to address Christoph's comments. Instead of doing the lib, I just kept everything in scsi_trnapsort_iscsi.c like the FC and SPI class. This was becuase the driver model and sysfs class is tied to the session and connection setup so separating did not buy very much at this time. The reason for this patch was becuase HW iscsi LLDs like qla4xxx cannot use the iscsi class becuase the scsi_host was tied to the interface and class code. This patch just seperates the session from scsi host so that LLDs that allocate the host per some resource like pci device can still use the class. This is also fixes a couple refcount bugs that can be triggered when users have a sysfs file open, close the session, then read or write to the file. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] iscsi: add high mem supportMike Christie2006-01-142-55/+31
| | | | | | | | | | | | | | | | | | | | | | | | From Mike Christie <michaelc@cs.wisc.edu> and FUJITA Tomonori <tomof@acm.org>: We cannot use page_address becuase some pages could be highmem. Instead, we can use sock_no_sendpage which does kmap for us. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] iscsi: data digest page cache usage fixFUJITA Tomonori2006-01-142-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | Users can write to a page while we are sending it and making digest calculations. This ends up causing us to retry the command when a digest error is later reported. By using sock_no_sendpage when data digests are calculated we can avoid a lot of (not all but it helps) the retries becuase sock_no_sendpage is not zero copy. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] iscsi: host locking fixzhenyu.z.wang@intel.com2006-01-141-3/+4
| | | | | | | | | | | | | | | | | | | | We should be taking the host_lock instead of the conn lock when checking host_busy. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] iscsi: data under/over flow fixzhenyu.z.wang@intel.com2006-01-141-4/+2
| | | | | | | | | | | | | | | | | | We need to check the ISCSI_FLAG_DATA_* flags. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] iscsi: whitespace cleanupFUJITA Tomonori2006-01-141-11/+11
| | | | | | | | | | | | | | | | | | Remove extra whitespaces. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] sem2mutex 3w-[x9]xxxJes Sorensen2006-01-144-8/+10
| | | | | | | | | | | | | | | | Convert a the 3w-9xxx.c and 3w-xxxx.c drivers to use mutexes instead of semaphores. Untested, but compiles and looks obviously correct. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] mptfc: need to select transport attrsJames Bottomley2006-01-141-0/+1
| | | | | | | | | | | | | | Now that mptfc actually uses the transport class, it can't be built without it. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] fusion - fix pci express bugMoore, Eric2006-01-141-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | The fix is to write 'MPI_HIM_DIM' to the Host Interrupt Mask register, when enabling interrupts. Instead of the tilde of MPI_HIM_RIM. Apparently writing '1's to some of the reserved bits was causing all the bits to go to `1`, which effectly disabled all interrupts. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] scsi_transport_sas: mapping the rphy channel equal to the port identifierMoore, Eric2006-01-141-3/+3
| | | | | | | | | | | | | | | | | | | | | | We will be mapping the RAID volumes in mptsas to a reserved channel that is one larger than the anticapated number of ports on the direct attached host adapter. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] fusion - mpi header udpateMoore, Eric2006-01-148-102/+554
| | | | | | | | | | | | | | This updates mpi headers in fusion drivers to version 1.5.12. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] fusion - adding raid support in mptsasMoore, Eric2006-01-142-1/+27
| | | | | | | | | | | | | | The SAS RAID volumes are reported beyond the expected number of phys. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] remove target parent limitiationChristoph Hellwig2006-01-146-48/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When James Smart fixed the issue of the userspace scan atributes crashing the system with the FC transport class he added a patch to let the transport class check if the parent is valid for a given transport class. When adding support for the integrated raid of fusion sas devices we ran into a problem with that, as it didn't allow adding virtual raid volumes without the transport class knowing about it. So this patch adds a user_scan attribute instead, that takes over from scsi_scan_host_selected if the transport class sets it and thus lets the transport class control the user-initiated scanning. As this plugs the hole about user-initiated scanning the target_parent hook goes away and we rely on callers of the scanning routines to do something sensible. For SAS this meant I had to switch from a spinlock to a mutex to synchronize the topology linked lists, in FC they were completely unsynchronized which seems wrong. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] fusion - adding support for FC949ESMoore, Eric2006-01-142-0/+6
| | | | | | | | | | | | | | Add software recognition for the new LSI Logic Fibre Channel controller. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] mptfusion - fc transport attributesMichael Reed2006-01-144-27/+613
| | | | | | | | | | | | Signed-off-by: Michael Reed <mdr@sgi.com> Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] sem2mutex: scsi_transport_spi.cJes Sorensen2006-01-141-5/+5
| | | | | | | | | | | | | | | | | | | | Convert the SCSI transport class code to use a mutex rather than a semaphore. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
OpenPOWER on IntegriCloud