summaryrefslogtreecommitdiffstats
path: root/drivers/watchdog/iTCO_wdt.c
Commit message (Collapse)AuthorAgeFilesLines
* watchdog: iTCO_wdt: TCO Watchdog patch for Intel DH89xxCC PCHSeth Heasley2011-01-121-1/+5
| | | | | | | | This patch adds the DeviceIDs for TCO Watchdog on the Intel DH89xxCC PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: iTCO_wdt: TCO Watchdog patch for Intel NM10 DeviceIDsWim Van Sebroeck2011-01-121-1/+5
| | | | | | | | This patch adds the Intel NM10 DeviceIDs for iTCO Watchdog. Reported-by: Dan Weinlader <dan@weinlader.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: iTCO_wdt: TCO Watchdog patch for Intel Patsburg PCHSeth Heasley2010-12-021-2/+6
| | | | | | | | This patch adds an additional LPC Controller DeviceID for the Intel Patsburg PCH for TCO Watchdog. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: iTCO_wdt.c: remove extra pci_dev_put()'s from init codePrarit Bhargava2010-10-281-2/+0
| | | | | | | | | | | | | | | | The iTCO_wdt driver erroneously releases the pci_dev, and causes PCI hotremove to fail because of an incorrect usage count. The probe for this driver does a for_each_pci_dev() which gets a reference for a pci_dev when iTCO_wdt_init() is successful. The for_each_pci_dev() loop puts a reference for a pci_dev when iTCO_wdt_init() fails, so the iTCO_wdt_init() does not need to do any pci_dev_put()'s. The only pci_dev_put() that is required is in the iTCO_wdt_cleanup() function. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: iTCO_wdt: Cleanup warning messagesPrarit Bhargava2010-10-281-9/+12
| | | | | | | | | | | | | | | | | | | | | | The current iTCO_wdt driver warnings are confusing. Currently when the device driver returns an error the console contains: iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware iTCO_wdt: No card detected After the patch, iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: failed to reset NO_REBOOT flag, device disabled by hardware/BIOS Clean this up and use the word "device" to describe the device. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: iTCO_wdt: TCO Watchdog patch for Intel Patsburg DeviceIDsSeth Heasley2010-10-281-0/+3
| | | | | | | | This patch adds the Intel Patsburg (PCH) DeviceIDs for iTCO Watchdog. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* iTCO_wdt: fix TCO V1 timeout values and limitsPádraig Brady2010-05-251-9/+20
| | | | | | | | | | | | | | For TCO V1 devices the programmed timeout was twice too long because the fact that the TCO V1 timer needs to count down twice before triggering the watchdog, wasn't accounted for. Also the timeout values in the module description and error message were clarified. And the _STS registers are 16 bit instead of 8 bit. Signed-off-by: Pádraig Brady <P@draigBrady.com> Tested-by: Simon Kagstrom <simon.kagstrom@netinsight.se> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] iTCO_wdt: TCO Watchdog patch for additional Intel Cougar Point ↵Seth Heasley2010-04-061-6/+93
| | | | | | | | | | | DeviceIDs This patch adds the Intel Cougar Point PCH LPC Controller DeviceIDs for iTCO Watchdog. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: stable <stable@kernel.org>
* [WATCHDOG] watchdog_info constifyWim Van Sebroeck2010-03-071-1/+1
| | | | | | | make the watchdog_info struct const where possible. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] iTCO_wdt: clean up probe(), modify err msgNaga Chumbalkar2010-03-061-10/+9
| | | | | | | | | | | | It's possible that the platform is not allowing reboot via TCO timer expiration. Also, differentiate between not finding a chipset that has TCO, and the case where TCO is present but the driver fails to initialize for some reason. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] iTCO_wdt: Add Intel Cougar Point and PCH DeviceIDsSeth Heasley2010-01-181-1/+44
| | | | | | | | This patch adds the Intel Cougar Point and PCH DeviceIDs for iTCO Watchdog. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] iTCO_wdt: add PCI ID for the Intel EP80579 (Tolapai) SoCImre Kaloz2009-12-231-0/+4
| | | | | | | | add PCI ID for the Intel EP80579 (Tolapai) SoC Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] iTCO_wdt.c - cleanup chipset documentationWim Van Sebroeck2009-12-041-44/+17
| | | | | | | Cleanup the documentation about the supported chipsets. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] iTCO_wdt: Add support for Intel Ibex PeakSeth Heasley2009-12-041-1/+12
| | | | | | | | Add the Intel Ibex Peak (PCH) Device IDs to iTCO_wdt.c. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] iTCO_wdt: fix memory corruption when RCBA is disabled by hardwareDenis V. Lunev2009-06-181-3/+9
| | | | | | | | | | | | | | According to 9.1.33 on p.343 of ICH8.pdf RCBA can be disabled by hardware if bit 0 of RCBA register is not set. Perform correct check for this to prevent memory corruption under some virtual machines where this feature is disabled. Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Vasily Averin <vvs@openvz.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* [WATCHDOG] iTCO_wdt: Cleanup codeWim Van Sebroeck2009-06-181-12/+12
| | | | | | | Clean-up the iTCO_wdt code so that checkpatch.pl get's happy... Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] More coding-style and trivial clean-upWim Van Sebroeck2009-03-251-5/+10
| | | | | | | Some more cleaning-up of the watchdog drivers. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] iTCO_wdt: fix SMI_EN regression 2Wim Van Sebroeck2009-02-141-21/+14
| | | | | | | | | | bugzilla: #12363 commit 7cd5b08be3c489df11b559fef210b81133764ad4 added a second regression: some Dell's and Compaq's lockup on boot. So we revert most of the code. The ICH9 reboot issue remains in place and will need some more fixing... :-( Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* iTCO_wdt: fix typo when setting TCO_EN bitLinus Torvalds2008-12-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The code used '&= 0x00002000' when it tried to set the TCO_EN bit, which obviously didn't set that bit at all, but instead just reset all the other bits in the SMI_EN register. This bug seemingly caused various random behavior, with Frans Pop reporting that X.org just silently hung at startup and Rafael Wysocki reports the fan spinning with full speed. See http://lkml.org/lkml/2008/12/3/178 http://bugzilla.kernel.org/show_bug.cgi?id=12162 The problem seems to have been triggered by "[WATCHDOG] iTCO_wdt : problem with rebooting on new ICH9 based motherboards" (commit 7cd5b08be3c489df11b559fef210b81133764ad4), but the bogus code existed before that too (in the "supermicro_old_pre_stop()" function), it just apparently never showed up due to different logic. In that commit the broken code got moved around and now gets executed much more. Reported-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Frans Pop <elendil@planet.nl> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [WATCHDOG] iTCO_wdt: add PCI ID's for ICH9 & ICH10 chipsetsWim Van Sebroeck2008-11-211-45/+73
| | | | | | | | Add support for the following I/O controller hubs: ICH7DH, ICH9M, ICH9M-E, ICH10, ICH10R, ICH10D and ICH10DO. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] iTCO_wdt : correct status clearingWim Van Sebroeck2008-11-211-2/+3
| | | | | | | | | | | The iTCO_wdt code was not clearing the correct bits. It now clears the timeout status bit and then the SECOND_TO_STS bit and then the BOOT_STS bit. Note: we should first clear the SECOND_TO_STS bit before clearing the BOOT_STS bit. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] iTCO_wdt : problem with rebooting on new ICH9 based motherboardsWim Van Sebroeck2008-11-211-13/+28
| | | | | | | | | | | | Bugzilla #9868: On Intel motherboards with the ICH9 based I/O controllers (Like DP35DP and DG33FB) the iTCO timer counts but it doesn't reboot the system after the counter expires. This patch fixes this by moving the enabling & disabling of the TCO_EN bit in the SMI_EN register into the start and stop code. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] more coding style clean-up'sWim Van Sebroeck2008-08-061-5/+5
| | | | | | More coding style clean-up's. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] Coding style - Indentation - part 2Wim Van Sebroeck2008-08-061-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | This brings the watchdog drivers into line with coding style. This patch takes cares of the indentation as described in chapter 1. Main changes: * Re-structure the ioctl switch call for all drivers as follows: switch (cmd) { case WDIOC_GETSUPPORT: case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: case WDIOC_GETTEMP: case WDIOC_SETOPTIONS: case WDIOC_KEEPALIVE: case WDIOC_SETTIMEOUT: case WDIOC_GETTIMEOUT: case WDIOC_GETTIMELEFT: default: } This to make the migration from the drivers to the uniform watchdog device driver easier in the future. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG 18/57] iTCO: unlocked_ioctl, coding style and cleanupAlan Cox2008-05-281-151/+145
| | | | | | | | Review and switch to unlocked_ioctl Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] Add ICH9DO into the iTCO_wdt.c driverGabriel C2008-05-251-5/+9
| | | | | | | | | | | | Add the Intel ICH9DO controller ID's for the iTCO_wdt kernel driver and bump the driver version. Tested on an P5E-VM DO ASUS motherboard. Signed-off-by: Gabriel Craciunescu <nix.or.die@googlemail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* [WATCHDOG] iTCO_wdt.c ICH8 pci-device-id'sWim Van Sebroeck2007-11-021-4/+12
| | | | | | | Add the pci-device-id's for the ICH8M and the ICH8M-E chipsets. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] iTCO_wdt.c init & exit fixesWim Van Sebroeck2007-11-021-5/+5
| | | | | | | Mark init and exit procedures as __devinit & _-devexit. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] iTCO_wdt.c pci_device_id table clean-upWim Van Sebroeck2007-11-021-39/+48
| | | | | | | Make the pci_device_id table more readable. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] Unlock in iTCO_wdt_start when reboot is disabledRoel Kluin2007-10-271-0/+1
| | | | | | | | Unlock in iTCO_wdt_start when reboot is disabled Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* mv watchdog tree under driversWim Van Sebroeck2007-10-181-0/+804
move watchdog tree from drivers/char/watchdog to drivers/watchdog. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
OpenPOWER on IntegriCloud