summaryrefslogtreecommitdiffstats
path: root/drivers/video
Commit message (Collapse)AuthorAgeFilesLines
* pm3fb: replace busy waiting with cpu_relaxKrzysztof Helt2007-10-161-3/+4
| | | | | | | | | | This patch replaces busy waiting with the cpu_relax() call. This makes scrolling faster. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pm2fb: replace busy waiting with cpu_relaxKrzysztof Helt2007-10-161-5/+4
| | | | | | | | | | This patch replaces busy waiting with the cpu_relax() call. This makes scrolling faster. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tdfxfb: replace busy waiting with cpu_relaxKrzysztof Helt2007-10-161-1/+2
| | | | | | | | | | This patch replaces busy waiting with cpu_relax() call. This makes scrolling faster. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ps3fb: Fix spurious mode change failuresGeert Uytterhoeven2007-10-161-7/+8
| | | | | | | | | | | | | | | | ps3fb: Add a `mode' parameter to ps3fb_get_res_table(), as in some cases it should check the full-screen flag of the _new_ video mode instead of the current video mode. This bug caused spurious mode change failures when switching between fullscreen and non-fullscreen modes using fbset, while ps3-video-mode worked fine. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> CC: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fbdev: Support for byte-reversed framebuffer formatsPavel Pisa2007-10-165-23/+108
| | | | | | | | | | | | | | | | | | | | Allow generic frame-buffer code to correctly write texts and blit images for 1, 2 and 4 bit per pixel frame-buffer organizations when pixels in bytes are organized to in opposite order than bytes in long type. Overhead should be reasonable. If option is not selected, than compiler should eliminate completely all overhead. The feature is disabled at compile time if CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set. [adaplas] Convert helper functions to macros if feature is not enabled. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* nvidiafb: Add boot option to reverse i2c port assignmentAntonino A. Daplas2007-10-163-4/+11
| | | | | | | | | | | | | | | | | | | There are a few nvidia hardware where the i2c port assignments are reversed, i.e., the 1st i2c port is assigned to the secondary display and the 2nd i2c port to the primary display. In most cases, if only 1 display is attached, or if only 1 flatpanel and 1 analog display is attached, the port reversal is of no consequence. However if 2 flatpanels are attached, it can cause display problems. There is no sane way of determining if the hardware reversed the i2c port assignment, so the simplest fix is to add a boot/module option, "reverse_i2c to explicitly reverse the i2c port. This also restores i2c ordering back to the pre-2.6.22 state. Signed-off-by: Antonino Daplas <adaplas@gail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fbdev: find mode with the highest/safest refresh rate in fb_find_mode()Michal Januszewski2007-10-161-12/+29
| | | | | | | | | | | | | | Currently, if the refresh rate is not specified, fb_find_mode() returns the first known video mode with the requested resolution, which provides no guarantees wrt the refresh rate. Change this so that the mode with the highest refresh rate is returned when the driver provides a custom video mode database and the monitor limits, and a mode with the safe 60 Hz refresh rate otherwise. Signed-off-by: Michal Januszewski <spock@gentoo.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Intel FB: support for interlaced video modesKrzysztof Halasa2007-10-162-5/+11
| | | | | | | | | | Intel framebuffer now supports interlaced video modes. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* vfb: make virtual framebuffer mmapableIlya Yanok2007-10-161-4/+74
| | | | | | | | | | | | | | | | | | Changed things: 1. vmalloc()/vfree() replaced with rvmalloc()/rvfree() (taken from drivers/media/video/se401.c) 2. mmap method implemented (mostly taken from drivers/media/video/se401.c) 3. smem_start and smem_len fields of struct fb_fix_screeninfo initialized. (smem_start initialized with virtual address, don't know if it is really bad...) [adaplas: sparse warning fix] Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pm2fb: panning and hardware cursor fixesKrzysztof Helt2007-10-161-16/+19
| | | | | | | | | | | | | | | | This patch: - disallows setting of virtual height above 2048 as it does not work for accelerated copyarea and imageblit - fixes blinking of pm2v cursor by pushing cursor outside the display (x=2047) - fixes hardware cursor position on Permedia 2 chips with panning enabled - enables hardware cursor by default Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pm2fb: hardware cursor support for the Permedia2Krzysztof Helt2007-10-161-12/+113
| | | | | | | | | This patch adds hardware cursor support for the Permedia 2 chip. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* cirrusfb: code improvement 2nd partKrzysztof Helt2007-10-161-30/+15
| | | | | | | | | | | | This patch removes: - redundant fields from the cirrusfb_regs structure - one redundant header - fixes two includes ("" to <>) Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* cirrusfb: code improvementsKrzysztof Helt2007-10-161-175/+41
| | | | | | | | | | | This patch does some "short-range" code improvements like merging identical switch clauses, replacing conditional branches with calculation of values, merging only once-used functions into place they are called from. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* cirrusfb: remove fields from cirrusfb_infoKrzysztof Helt2007-10-161-81/+68
| | | | | | | | | This patch removes unused or redundant fields from cirrusfb_info structure. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* cirrusfb: remove typedefsKrzysztof Helt2007-10-161-14/+14
| | | | | | | | | | This patch replaces "typedef enum" with "enum type" constructs. Using the typedef is error for the checkpatch.pl script. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* cirrusfb: checkpatch.pl cleanupKrzysztof Helt2007-10-161-805/+983
| | | | | | | | | | This patch fixes over 850 errors and warnings pointed out by the checkpatch.pl script. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* s3c2410fb: make use of default_display settingsKrzysztof Helt2007-10-161-8/+17
| | | | | | | | | | | | | This patch changes mode selection to always prefer default mode if possible and always honor type of display set by default mode settings. This patch is required in case the same display modes were defined for different panels (e.g. STN and TFT). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* s3c2410fb: removes lcdcon1 register value from s3c2410fb_displayKrzysztof Helt2007-10-161-8/+1
| | | | | | | | | | This patch removes lcdcon1 register field from the s3c2410fb_display as all bits are calculated from other fields. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* s3c2410fb: adds pixclock to s3c2410fb_displayKrzysztof Helt2007-10-161-26/+16
| | | | | | | | | | | | | | | This patch adds pixelclock field to the s3c2410fb_display structure and make use of it in the driver. The Bast machine defined 9 modes but pixclock and margin values are defined only for the 640x480 modes so I removed other modes. This patch also fixes wrong display type constant for the SMDK2440 board. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* s3c2410fb: source code improvementsKrzysztof Helt2007-10-162-124/+76
| | | | | | | | | | | | | | | | This patch: - moves more display mode preparations to s3c2410fb_check_var() - reduces number of fields in s3c2410fb_info - removes redundant values setting in s3c2410fb_probe() - removes static mach_info pointer - releases fb_info structure in s3c2410fb_remove() - changes s3c2410fb_init to __init from __devinit - fixes few typos in comments and removes unused includes Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fbdev: change asm/uaccess.h to linux/uaccess.hKrzysztof Helt2007-10-1636-37/+19
| | | | | | | | | | | This patch replaces <asm/uaccess.h> with <linux/uaccess.h> after the checkpatch.pl hint. The include of <asm/uaccess.h> is removed if the driver does not use it. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fbcon: Convert struct font_desc to use ISO C initializersRalf Baechle2007-10-1610-64/+65
| | | | | | | | | | | Akpm's patch "newport_con warning fix" got me to look at the console drivers again and one thing that I noticed was that none of the fonts was using ISO initializers for it's fonts. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* atyfb: atyfb: Unshare pseudo_paletteGeert Uytterhoeven2007-10-162-3/+2
| | | | | | | | | | atyfb: Move the pseudo palette into the card-specific atyfb_par, so it's no longer shared among multiple cards Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* s3c2410fb: byte ordering fixesKrzysztof Helt2007-10-161-5/+15
| | | | | | | | | | | | | | This patch sets correct bits related to the byte ordering of the framebuffer. This was tested on little endian kernel only. The big endian kernel may require different settings. The patch also adds 32 bpp mode which is called 24 bpp by Samsung. One pixel takes 32 bits but only 24 bits are used in this mode. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* s3c2410fb: fix missing registers offsetKrzysztof Helt2007-10-161-12/+20
| | | | | | | | | | This patch adds missing virtual register offsets where appropriate. This fixes crashes in the driver. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* s3c2410fb: remove lcdcon2 and lcdcon3 register fieldsKrzysztof Helt2007-10-161-6/+2
| | | | | | | | | | This patch removes unused lcdcon2 and lcdcon3 register value from the s3c2410fb_display structure. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* s3c2410fb: add pulse length fields to s3c2410fb_displayKrzysztof Helt2007-10-161-18/+16
| | | | | | | | | | | This patch adds synchronization pulse lenght fields to the s3c2410fb_display structure and makes use of them in the driver. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* s3c2410fb: use vertical margins valuesKrzysztof Helt2007-10-161-14/+7
| | | | | | | | | | This patch makes use of vertical margins fields in the s3c2410fb_display structure. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* s3c2410fb: remove lcdcon3 register from s3c2410fb_displayKrzysztof Helt2007-10-161-8/+9
| | | | | | | | | | This patch removes unused lcdcon3 register from the s3c2410fb_display structure. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* s3c2410fb: use new margin fieldsKrzysztof Helt2007-10-161-98/+136
| | | | | | | | | | This patch makes use of margins fields in the s3c2410fb_display structure. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* s3c2410fb: multi-display supportKrzysztof Helt2007-10-162-34/+51
| | | | | | | | | | | This patch adds a new structure to describe and handle more than one panel (display mode) for the s3c2410 framebuffer. This structure is added after the pxafb driver. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* s3c2410fb: remove fb_info pointer from s3c2410fb_infoKrzysztof Helt2007-10-162-22/+22
| | | | | | | | | | | This patch removes redundant fb field from the s3c2410fb_info structure. This breaks circular reference fb_info -> s3c2410fb_info -> fb_info again. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* s3c2410fb: code cleanupKrzysztof Helt2007-10-161-185/+172
| | | | | | | | | | | This patch cleans up the driver a bit. It contains coding style fixes (pointed by Lindent and checkpatch), white space clean ups and few minor code improvements. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pm3fb: hardware cursor supportKrzysztof Helt2007-10-161-0/+118
| | | | | | | | | This patch adds hardware cursor support to the pm3fb driver. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pm2fb: Permedia 2V hardware cursor supportKrzysztof Helt2007-10-161-0/+137
| | | | | | | | | | | This patch adds hardware cursor support for Permedia 2V chips. The hardware cursor is disabled by default. It does not blink - the same issue is mentioned in the x11 driver. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fbdev: fb_create_modedb() non-static `int first = 1;'Geert Uytterhoeven2007-10-161-3/+1
| | | | | | | | | | | | | Looking at the code flow, `int first' in fb_create_modedb() should be static. [adaplas] Better for 'int first' to be moved outside the loop. [akpm@linux-foundation.org: kill stray semicolon] Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/video/geode/lxfb_core.c: fix lxfb_setup warningEugene Teo2007-10-161-6/+1
| | | | | | | | | | drivers/video/geode/lxfb_core.c: In function 'lxfb_setup': drivers/video/geode/lxfb_core.c:564: warning: unused variable 'opt' Signed-off-by: Eugene Teo <eugeneteo@kernel.sg> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pm3fb: checkpatch fixesKrzysztof Helt2007-10-161-70/+82
| | | | | | | | | | This patch fixes all errors detected by checkpatch.pl script in the pm3fb.c file. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pm2fb: checkpatch fixesKrzysztof Helt2007-10-161-74/+88
| | | | | | | | | | This patch fixes all errors detected by checkpatch.pl script in the pm2fb.c file. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tdfxfb: mtrr supportKrzysztof Helt2007-10-161-4/+43
| | | | | | | | | | | This patch adds mtrr support to the tdfxfb driver. It also kills one redundant include and initialization value. [akpm@linux-foundation.org: cleanups] Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tdfxfb: hardware cursorKrzysztof Helt2007-10-161-95/+74
| | | | | | | | | This patch adds hardware cursor support to the tdfxfb driver. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tdfxfb: code improvementsKrzysztof Helt2007-10-161-114/+47
| | | | | | | | | | This patch improves source code mainly by killing redundant variable loads, reducing number of variables, simplifying conditional branches, etc. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fbdev: Fix incorrect timings in some modedb entriesAntonino A. Daplas2007-10-161-6/+6
| | | | | | | | | | | | Reported by: John Lumby <johnlumby@hotmail.com> Some of the entries in the mode database does not match the comments and/or the refresh field. Adjust the timings so they match with both the comments and the refresh rate. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* unexport fb_prepare_logoAdrian Bunk2007-10-161-1/+0
| | | | | | | | | The logo code is not and should not be used by modules. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tdfxfb: palette fixesKrzysztof Helt2007-10-161-1/+17
| | | | | | | | | | | | This patch fixes: - palette setting in 8-bit mode (aka 'funky penguin') - grayscale handling - adds proper barriers in xxx_inb/outb functions Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tdfxfb: 3 fixesKrzysztof Helt2007-10-161-64/+108
| | | | | | | | | | | | | | | | This patch fixes 3 issues: - transparency handling in tdfxfb - panning with more than 4096 virtual height and acceleration (acceleration with x & y > 4096) - exit paths on errors in tdfxfb_probe() Additionally it sets a FBINFO_READS_FAST flag to use smart blitter scrolling (speed up on tdfxfb). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tdfxfb: coding style improvementKrzysztof Helt2007-10-161-361/+376
| | | | | | | | | | | | | This patch contains coding style improvements to the tdfxfb driver (white spaces, indentations, long lines). It also moves fb_ops structure to the end of file, so forward declarations of ops functions are redundant. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tridentfb: coding style improvementKrzysztof Helt2007-10-161-483/+592
| | | | | | | | | | | | This patch contains coding style improvements to the tridentfb driver (white spaces, indentations, long lines). It also moves fb_ops structure after fb api functions are defined. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pxafb: Add support for other palette formatsHans J. Koch2007-10-162-15/+51
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the other three palette formats possible with the PXA LCD controller. This is required on boards where an LCD is connected with all its 18 bits. With this patch, it's possible to use an 8-bit mode with 18-bit palette entries. This used to be possible in 2.4 kernels but disappeared in 2.6. With current kernels, you can only get wrong colours out of an LCD connected this way. Users can choose the palette format by doing something like this in their board definition: static struct pxafb_mach_info my_fb_info = { [...] .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_PDFOR_3, .lccr4 = LCCR4_PAL_FOR_2, [...] }; Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mbxfb: Improvements and new featuresRaphael Assenat2007-10-163-77/+356
| | | | | | | | | | | | | | | | | | | | | | | | | | | This contains the following changes: * Overlay surface alpha is configured separately from the overlay. This prevents display glitches (configure and fill the overlay first, set alpha to a visible value next) * Added an ioctl for configuring transparency of the Overlay and graphics planes. Blend mode, colorkey mode and global alpha mode are supported. * Added an ioctl for setting the plane order. The overlay plance can be placed over or under the graphics plane. * Added an ioctl for setting and reading chip registers, with mask. * Updated copyright for 2007 [adaplas] * Coding style changes Signed-off-by: Raphael Assenat <raph@8d.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OpenPOWER on IntegriCloud