summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial/spcp8x5.c
Commit message (Collapse)AuthorAgeFilesLines
* USB: serial: spcp8x5: fix modem-status handlingJohan Hovold2017-01-161-1/+7
| | | | | | | | | | | | | | | | | | Make sure to detect short control transfers and return zero on success when retrieving the modem status. This fixes the TIOCMGET implementation which since e1ed212d8593 ("USB: spcp8x5: add proper modem-status support") has returned TIOCM_LE on successful retrieval, and avoids leaking bits from the stack on short transfers. This also fixes the carrier-detect implementation which since the above mentioned commit unconditionally has returned true. Fixes: e1ed212d8593 ("USB: spcp8x5: add proper modem-status support") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: serial: spcp8x5: fix NULL-deref at openJohan Hovold2017-01-041-0/+14
| | | | | | | | | | | | | Fix NULL-pointer dereference in open() should the device lack the expected endpoints: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at spcp8x5_open+0x30/0xd0 [spcp8x5] Fixes: 619a6f1d1423 ("USB: add usb-serial spcp8x5 driver") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: serial: add missing newlines to dev_<level> messages.Johan Hovold2014-03-121-4/+3
| | | | | | | | | Add missing newlines to dev_<level> messages. Also make some messages less verbose where appropriate. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
* usb: delete non-required instances of include <linux/init.h>Paul Gortmaker2014-01-081-1/+0
| | | | | | | | | | None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: spcp8x5: correct handling of CS5 settingColin Leitner2013-12-021-16/+14
| | | | | | | | | | | | This patch removes an erroneous check of CSIZE, which made it impossible to set CS5. Compiles clean, but couldn't test against hardware. Signed-off-by: Colin Leitner <colin.leitner@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: set drain delay at port probeJohan Hovold2013-07-231-2/+2
| | | | | | | | The port drain delay is constant and should be set at port probe rather than open. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: spcp8x5: fix device initialisation at openJohan Hovold2013-06-101-6/+4
| | | | | | | | | Do not use uninitialised termios data to determine when to configure the device at open. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: spcp8x5: add proper modem-status supportJohan Hovold2013-03-251-17/+10
| | | | | | | | | | | Fetch modem status on carrier_raised and tiocmget. This driver appeared to support modem-status but only read the modem status registers once at open and then used that cached value for all further enquires. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: spcp8x5: reimplement device type detectionJohan Hovold2013-03-251-49/+21
| | | | | | | | | | | Reimplement device type detection using the device id table and quirks. Device type was used to detect one device type which did not support to control functions. Add quirks to the device table and store them in the private port data at probe instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: spcp8x5: clean up modem status retrievalJohan Hovold2013-03-251-11/+7
| | | | | | | Clean up modem status retrieval. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: spcp8x5: pass usb-serial port to control functionsJohan Hovold2013-03-251-26/+28
| | | | | | | | | | Pass usb-serial port to the control functions for uart status and work mode. Use port device for debugging and use dev_err to report errors. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: spcp8x5: clean up codeJohan Hovold2013-03-251-35/+37
| | | | | | | Clean up this driver somewhat. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: spcp8x5: remove broken uart-error handlingJohan Hovold2013-03-251-52/+0
| | | | | | | | | | | | | Remove broken uart-error handling. This driver appears to implement uart-error handling but does not receive status interrupts or status information with bulk in transfers. Instead status was retrieved at open and used to flag only the first bulk in transfer. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: spcp8x5: remove broken TIOCMIWAIT supportJohan Hovold2013-03-251-68/+0
| | | | | | | | | | Remove broken TIOCMIWAIT support. This drivers appears to implement TIOCMIWAIT but has no means of receiving modem-status interrupts. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: spcp8x5: fix use-after-free in TIOCMIWAITJohan Hovold2013-03-211-4/+5
| | | | | | | | | | | | Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* TTY: switch tty_flip_buffer_pushJiri Slaby2013-01-151-9/+9
| | | | | | | | | | | | | | | | | | | | Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. Now, the one where most of tty_port_tty_get gets removed: tty_flip_buffer_push. IOW we also closed all the races in drivers not using tty_port_tty_get at all yet. Also we move tty_flip_buffer_push declaration from include/linux/tty.h to include/linux/tty_flip.h to all others while we are changing it anyway. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* TTY: switch tty_insert_flip_charJiri Slaby2013-01-151-1/+1
| | | | | | | | | | | | | Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. tty_insert_flip_char is the next one to proceed. This one is used all over the code, so the patch is huge. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* TTY: convert more flipping functionsJiri Slaby2013-01-151-1/+1
| | | | | | | | | | | | | | | | Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty pointer in many call sites. Only tty_port will be needed and hence no more tty_port_tty_get calls in those paths. Now 4 string flipping ones are on turn: * tty_insert_flip_string_flags * tty_insert_flip_string_fixed_flag * tty_prepare_flip_string * tty_prepare_flip_string_flags Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: remove driver version informationJohan Hovold2012-10-311-4/+0
| | | | | | | | | | | Remove all MODULE_VERSION macros and driver-version information (except for garmin_gps which uses it in a status reply). It is the kernel version that matters and not some private version scheme which rarely even gets updated. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: spcp8x5: fix port-data memory leakJohan Hovold2012-10-171-28/+18
| | | | | | | | | | | | | | | Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds2012-10-011-5/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull USB changes from Greg Kroah-Hartman: "Here is the big USB pull request for 3.7-rc1 There are lots of gadget driver changes (including copying a bunch of files into the drivers/staging/ccg/ directory so that the other gadget drivers can be fixed up properly without breaking that driver), and we remove the old obsolete ub.c driver from the tree. There are also the usual XHCI set of updates, and other various driver changes and updates. We also are trying hard to remove the old dbg() macro, but the final bits of that removal will be coming in through the networking tree before we can delete it for good. All of these patches have been in the linux-next tree. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up several annoying - but fairly mindless - conflicts due to the termios structure having moved into the tty device, and often clashing with dbg -> dev_dbg conversion. * tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (339 commits) USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc USB: uas: fix gcc warning USB: uas: fix locking USB: Fix race condition when removing host controllers USB: uas: add locking USB: uas: fix abort USB: uas: remove aborted field, replace with status bit. USB: uas: fix task management USB: uas: keep track of command urbs xhci: Intel Panther Point BEI quirk. powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support Revert "usb : Add sysfs files to control port power." USB: serial: remove vizzini driver usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems Increase XHCI suspend timeout to 16ms USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq USB: sierra_ms: don't keep unused variable fsl/usb: Add support for USB controller version 2.4 USB: qcaux: add Pantech vendor class match ...
| * USB: serial: spcp8x5.c: remove debug module parameterGreg Kroah-Hartman2012-09-141-5/+0
| | | | | | | | | | | | | | | | | | | | | | Now that the dbg() macro is no longer being used in the driver, the debug module parameter doesn't do anything at all. So remove it so as to not confuse people. CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | tty: move the termios object into the ttyAlan Cox2012-07-161-6/+6
|/ | | | | | | | | | | | This will let us sort out a whole pile of tty related races. The alternative would be to keep points and refcount the termios objects. However 1. They are tiny anyway 2. Many devices don't use the stored copies 3. We can remove a pty special case Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: spcp8x5.c: remove dbg() usageGreg Kroah-Hartman2012-05-151-4/+8
| | | | | | | | | | | dbg() is a usb-serial specific macro. This patch converts the spcp8x5.c driver to use dev_dbg() instead to tie into the dynamic debug infrastructure. CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: rework usb_serial_register/deregister_drivers()Greg Kroah-Hartman2012-05-081-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reworks the usb_serial_register_drivers() and usb_serial_deregister_drivers() to not need a pointer to a struct usb_driver anymore. The usb_driver structure is now created dynamically and registered and unregistered as needed. This saves lines of code in each usb-serial driver. All in-kernel users of these functions were also fixed up at this time. The pl2303 driver was tested that everything worked properly. Thanks for the idea to do this from Alan Stern. Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Worsley <amworsley@gmail.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Donald Lee <donald@asix.com.tw> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Oliver Neukum <oliver@neukum.name> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Berger <pberger@brimson.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Support Department <support@connecttech.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Wang YanQing <Udknight@gmail.com> Cc: William Greathouse <wgreathouse@smva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: remove usb_serial_disconnect call in all driversGreg Kroah-Hartman2012-05-071-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is now set by the usb-serial core, no need for the driver to individually set it. Thanks to Alan Stern for the idea to get rid of it. Cc: William Greathouse <wgreathouse@smva.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Peter Berger <pberger@brimson.com> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Oliver Neukum <oliver@neukum.name> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Support Department <support@connecttech.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Andrew Worsley <amworsley@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Donald Lee <donald@asix.com.tw> Cc: Julia Lawall <julia@diku.dk> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: Wang YanQing <Udknight@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: remove usb_serial_probe call in all driversGreg Kroah-Hartman2012-05-071-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is now set by the usb-serial core, no need for the driver to individually set it. Thanks to Alan Stern for the idea to get rid of it. Cc: William Greathouse <wgreathouse@smva.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Peter Berger <pberger@brimson.com> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Oliver Neukum <oliver@neukum.name> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Support Department <support@connecttech.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Andrew Worsley <amworsley@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Donald Lee <donald@asix.com.tw> Cc: Julia Lawall <julia@diku.dk> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: Wang YanQing <Udknight@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: spcp8x5.c: remove dbg() tracing callsGreg Kroah-Hartman2012-05-031-2/+0
| | | | | | | | | | dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: spcp8x5.c: use module_usb_serial_driverGreg Kroah-Hartman2012-02-281-18/+1
| | | | | | | | | | | This converts the spcp8x5.c driver to use the module_usb_serial_driver() call instead of having to have a module_init/module_exit function, saving a lot of duplicated code. CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb-serial: use new registration API in [q-s]* driversAlan Stern2012-02-241-16/+10
| | | | | | | | | | | This patch (as1528) modifies the following usb-serial drivers to utilize the new usb_serial_{de}register_drivers() routines: qcaux, qcserial, safe_serial, siemens_mpi, sierra, spcp8x5, ssu100, and symbolserial. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* module_param: make bool parameters really bool (drivers & misc)Rusty Russell2012-01-131-1/+1
| | | | | | | | | | | | module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* tty: remove filp from the USB tty ioctlsAlan Cox2011-02-171-1/+1
| | | | | | | | We don't use it so we can trim it from here as we try and stamp the file object dependencies out of the serial code. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* tiocmset: kill the file pointer argumentAlan Cox2011-02-171-1/+1
| | | | | | | | Doing tiocmget was such fun we should do tiocmset as well for the same reasons Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* tiocmget: kill off the passing of the struct fileAlan Cox2011-02-171-1/+1
| | | | | | | | | | We don't actually need this and it causes problems for internal use of this functionality. Currently there is a single use of the FILE * pointer. That is the serial core which uses it to check tty_hung_up_p. However if that is true then IO_ERROR is also already set so the check may be removed. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: serial: handle Data Carrier Detect changesLibor Pechacek2011-01-221-1/+5
| | | | | | | | | | | | | | | | | Alan's commit 335f8514f200e63d689113d29cb7253a5c282967 introduced .carrier_raised function in several drivers. That also means tty_port_block_til_ready can now suspend the process trying to open the serial port when Carrier Detect is low and put it into tty_port.open_wait queue. We need to wake up the process when Carrier Detect goes high and trigger TTY hangup when CD goes low. Some of the devices do not report modem status line changes, or at least we don't understand the status message, so for those we remove .carrier_raised again. Signed-off-by: Libor Pechacek <lpechacek@suse.cz> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB serial: add missing .usb_driver field in serial driversAlan Stern2011-01-221-0/+1
| | | | | | | | | | | | | | | | This patch (as1443) fixes a bug found in many of the USB serial drivers: They don't set the .usb_driver field in their usb_serial_driver structure. This field is needed for assigning dynamic IDs for device matching. In addition, starting with the 2.6.37 kernel, the .usb_driver field is needed for proper autosuspend operation. Without it, attempts to open the device file will fail. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Dan Williams <dcbw@redhat.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* drivers/usb: Remove unnecessary return's from void functionsJoe Perches2010-08-101-1/+0
| | | | | | | | | | | | | | | Greg prefers this to go through the trivial tree. http://lkml.org/lkml/2010/6/24/1 There are about 2500 void functions in drivers/usb Only a few used return; at end of function. Standardize them a bit. Moved a statement down a line in drivers/usb/host/u132-hcd.c Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* USB: spcp8x5: reimplement using generic frameworkJohan Hovold2010-05-201-378/+29
| | | | | | | | | | Kill custom fifo, read, and single-urb write implementations. Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: tty: fix incorrect use of tty_insert_flip_string_fixed_flagJohan Hovold2010-05-201-2/+2
| | | | | | | | | | | | | Fix regression introduced by commit a108bfcb372d8c4452701039308fb95747911c59 (USB: tty: Prune uses of tty_request_room in the USB layer) which broke three drivers (cypress_m8, digi_acceleport and spcp8x5) through incorrect use of tty_insert_flip_string_fixed_flag. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> [.34] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove references to port->port.count from the serial driversAlan Stern2010-03-021-12/+5
| | | | | | | | | | | | This patch (as1344) removes references to port->port.count from the USB serial drivers. Now that serial ports are properly reference counted, port.count checking is unnecessary and incorrect. Drivers should assume that the port is in use from the time the open method runs until the close method is called. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: tty: Prune uses of tty_request_room in the USB layerAlan Cox2010-03-021-4/+2
| | | | | | | | | | | We have lots of callers that do not need to do this in the first place. Remove the calls as they both cost CPU and for big buffers can mess up the multi-page allocation avoidance. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: serial: Remove unnecessary \n's from dbg usesJoe Perches2010-03-021-1/+1
| | | | | | | | | #define dbg adds the newline, messages shouldn't. Converted dbg("%s", "some string") to dbg("some string") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB serial: make USB device id constantNémeth Márton2010-03-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The id_table field of the struct usb_device_id is constant in <linux/usb.h> so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Németh Márton <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* trivial: remove unnecessary semicolonsJoe Perches2009-09-211-1/+1
| | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* tty: USB serial termios bitsAlan Cox2009-09-191-11/+10
| | | | | | | | | Various drivers have hacks to mangle termios structures. This stems from the fact there is no nice setup hook for configuring the termios settings when the port is created Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* tty: USB does not need the filp argument in the driversAlan Cox2009-09-191-4/+1
| | | | | | | | And indeed none of them use it. Clean this up as it will make moving to a standard open method rather easier. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb-serial: replace shutdown with disconnect, releaseAlan Stern2009-06-151-3/+2
| | | | | | | | | | | | | | | | This patch (as1254) splits up the shutdown method of usb_serial_driver into a disconnect and a release method. The problem is that the usb-serial core was calling shutdown during disconnect handling, but drivers didn't expect it to be called until after all the open file references had been closed. The result was an oops when the close method tried to use memory that had been deallocated by shutdown. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* tty: Bring the usb tty port structure into more useAlan Cox2009-06-111-54/+31
| | | | | | | | | | This allows us to clean stuff up, but is probably also going to cause some app breakage with buggy apps as we now implement proper POSIX behaviour for USB ports matching all the other ports. This does also mean other apps that break on USB will now work properly. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: serial: fix up urb->status usageGreg Kroah-Hartman2009-01-071-10/+10
| | | | | | | | Some of the usb-serial drivers are starting to use urb->status in ways they should not be doing. This fixes up some of them to prevent that. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove use of err() in drivers/usb/serialGreg Kroah-Hartman2008-10-171-3/+4
| | | | | | | | | err() is going away, so switch to dev_err() or printk() if it's really needed. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud