summaryrefslogtreecommitdiffstats
path: root/drivers/usb/musb
Commit message (Collapse)AuthorAgeFilesLines
* usb: musb: Fix getting a generic phy for musb_dspsTony Lindgren2015-02-231-1/+24
| | | | | | | | | We still have a combination of legacy phys and generic phys in use so we need to support both types of phy for musb_dsps.c. Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: Fix use for of_property_read_bool for disabled multipointTony Lindgren2015-02-232-4/+10
| | | | | | | | | | | | | | The value for the multipoint dts property is ignored when parsing with of_property_read_bool, so we currently have multipoint always set as 1 even if value 0 is specified in the dts file. Let's fix this to read the value too instead of just the property like the binding documentation says as otherwise MUSB will fail to work on devices with Mentor configuration that does not support multipoint. Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: core: add pm_runtime_irq_safe()Felipe Balbi2015-02-231-4/+6
| | | | | | | | | | | | | | | | | | | | | | We need a pm_runtime_get_sync() call from within musb_gadget_pullup() to make sure registers are accessible at that time. The problem is that musb_gadget_pullup() is called with IRQs disabled and, because of that, we need to tell pm_runtime that this pm_runtime_get_sync() is IRQ safe. We can simply add pm_runtime_irq_safe(), however, because we need to make our read/write accessor function pointers have been initialized before trying to use them. This means that all pm_runtime initialization for musb_core needs to be moved down so that when we call pm_runtime_irq_safe(), the pm_runtime_get_sync() that it calls on the parent, won't cause a crash due to NULL musb_read/write accessors. Reported-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: musb_host: Enable HCD_BH flag to handle urb return in bottom halfGeorge Cherian2015-02-231-1/+1
| | | | | | | | | Enable HCD_BH flag for musb host controller driver. This improves the MSC/UVC through put. With this enabled even 640x480@30fps webcam streaming is also supported. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: fix device hotplug behind hubBin Liu2015-02-042-1/+7
| | | | | | | | | | | | | | | | The commit 889ad3b "usb: musb: try a race-free wakeup" breaks device hotplug enumeraitonn when the device is connected behind a hub while usb autosuspend is enabled. Adding finish_resume_work into runtime resume callback fixes the issue. Also resume root hub is required to resume the bus from runtime suspend, so move musb_host_resume_root_hub() back to its original location, where handles RESUME interrupt. Signed-off-by: Bin Liu <b-liu@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: blackfin: remove incorrect __exit_p()Dmitry Torokhov2015-02-021-1/+1
| | | | | | | | | bfin_remove() is not (nor should it be) marked as __exit, so we should not be using __exit_p() wrapper with it, otherwise unbinding through sysfs does not work properly. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: add omap-control dependencyArnd Bergmann2015-01-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | The omap musb front-end calls into the phy driver directly instead of using a generic phy interface, which causes a link error when the specific driver is not built-in: drivers/built-in.o: In function `omap2430_musb_disable': usb/musb/omap2430.c:480: undefined reference to `omap_control_usb_set_mode' drivers/built-in.o: In function `omap2430_musb_enable': usb/musb/omap2430.c:466: undefined reference to `omap_control_usb_set_mode' usb/musb/omap2430.c:447: undefined reference to `omap_control_usb_set_mode' drivers/built-in.o: In function `omap_musb_set_mailbox': usb/musb/omap2430.c:273: undefined reference to `omap_control_usb_set_mode' usb/musb/omap2430.c:304: undefined reference to `omap_control_usb_set_mode' drivers/built-in.o:(.debug_addr+0xbd9e0): more undefined references to `omap_control_usb_set_mode' follow This adds an explicit dependency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: ca784be36cc725 ("usb: start using the control module driver") Cc: <stable@vger.kernel.org> # v3.9+ Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: add generic usb phy dependenciesArnd Bergmann2015-01-291-0/+5
| | | | | | | | | | | | | | | | | | | | | Multiple musb glue drivers depend on the generic usb phy support, but fail to list it as a dependency in Kconfig. This results in build erros like: drivers/built-in.o: In function `am35x_remove': :(.text+0xadacc): undefined reference to `usb_phy_generic_unregister' drivers/built-in.o: In function `am35x_probe': :(.text+0xae1c8): undefined reference to `usb_phy_generic_register' :(.text+0xae244): undefined reference to `usb_phy_generic_unregister' drivers/built-in.o: In function `jz4740_remove': :(.text+0xaf648): undefined reference to `usb_phy_generic_unregister' drivers/built-in.o: In function `jz4740_musb_init': :(.text+0xaf694): undefined reference to `usb_phy_generic_register' This adds the ones that are missing. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: gadget: use common is_selfpoweredPeter Chen2015-01-292-4/+2
| | | | | | | Delete private selfpowered variable, and use common one. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: cppi41: improve rx channel abort routineBin Liu2015-01-271-3/+9
| | | | | | | | | | | | | | | | | 1. set AUTOREQ to NONE at the beginning of teardown; 2. add delay for dma pipeline to drain; 3. Do not set USB_TDOWN bit for RX teardown. The CPPI hw has an issue that when tearing down a RX channel, if another RX channel is receiving data, the CPPI will lockup. To workaround the issue, do not set the CPPI TD bit. The steps before this point ensures the CPPI channel will be torn down properly. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: cppi41: correct the macro name EP_MODE_AUTOREG_*Bin Liu2015-01-271-6/+6
| | | | | | | | The macro EP_MODE_AUTOREG_* should be called EP_MODE_AUTOREQ_*, as they are used for register AUTOREQ. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: virthub: use HUB_CHAR_*Sergei Shtylyov2015-01-271-3/+3
| | | | | | | | Fix using the bare numbers to set the 'wHubCharacteristics' field of the Hub Descriptor while the values are #define'd in <linux/usb/ch11.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* Merge tag 'v3.19-rc5' into nextFelipe Balbi2015-01-195-20/+25
|\ | | | | | | | | | | | | | | Linux 3.19-rc5 Conflicts: drivers/usb/dwc2/gadget.c drivers/usb/gadget/udc/bdc/bdc_ep.c
| * usb: musb: stuff leak of struct usb_hcdSebastian Andrzej Siewior2014-12-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | since the split of host+gadget mode in commit 74c2e9360058 ("usb: musb: factor out hcd initalization") we leak the usb_hcd struct. We call now musb_host_cleanup() which does basically usb_remove_hcd() and also sets the hcd variable to NULL. Doing so makes the finall call to musb_host_free() basically a nop and the usb_hcd remains around for ever without anowner. This patch drops that NULL assignment for that reason. Fixes: 74c2e9360058 ("usb: musb: factor out hcd initalization") Cc: <stable@vger.kernel.org> # v3.11+ Cc: Daniel Mack <zonque@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: musb: Fix randconfig build issues for Kconfig optionsTony Lindgren2014-12-221-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 82c02f58ba3a ("usb: musb: Allow multiple glue layers to be built in") enabled selecting multiple glue layers, which in turn exposed things more for randconfig builds. If NOP_USB_XCEIV is built-in and TUSB6010 is a loadable module, we will get: drivers/built-in.o: In function `tusb_remove': tusb6010.c:(.text+0x16a817): undefined reference to `usb_phy_generic_unregister' drivers/built-in.o: In function `tusb_probe': tusb6010.c:(.text+0x16b24e): undefined reference to `usb_phy_generic_register' make: *** [vmlinux] Error 1 Let's fix this the same way as commit 70c1ff4b3c86 ("usb: musb: tusb-dma can't be built-in if tusb is not"). And while at it, let's not allow selecting the glue layers except on platforms really using them unless COMPILE_TEST is specified: - TUSB6010 is in practise only used on omaps - DSPS is only used on TI platforms - UX500 is only used on STE platforms Cc: Linus Walleij <linus.walleij@linaro.org> Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: musb: Fix a few off-by-one lengthsRasmus Villemoes2014-12-222-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | !strncmp(buf, "force host", 9) is true if and only if buf starts with "force hos". This was obviously not what was intended. The same error exists for "force full-speed", "force high-speed" and "test packet". Using strstarts avoids the error-prone hardcoding of the prefix length. For consistency, also change the other occurences of the !strncmp idiom. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: musb: blackfin: fix build breakFelipe Balbi2014-12-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit cc92f681 (usb: musb: Populate new IO functions for blackfin) added a typo which prevented MUSB's blackfin glue layer from being built. Due to lack of tests and compilers for that architecture, the typo ended up being merged and causing a build regression. Fix that here Cc: Tony Lindgren <tony@atomide.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: musb: debugfs: cope with blackfin's odditiesFelipe Balbi2014-12-221-8/+10
| | | | | | | | | | | | | | | | | | | | | | | | Blackfin's MUSB implementation lacks a bunch of registers which they end up not defining a macro for. In order to avoid build breaks, let's ifdef out some of the registers from our regdump debugfs utility so that we don't try to use those on Blackfin builds. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: musb: debugfs: improve copy_from_user() argumentMarkus Pargmann2015-01-151-1/+1
|/ | | | | | | | | | | | While the code is correct and functions well, it's still a bit misleading to add the reference operator in from of the buf argument. This patch simply removes that operator in order to make use of buf slightly better to the eyes. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds2014-12-141-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
| * Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman2014-11-031-1/+0
| |\ | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
| | * usb: musb: drop owner assignment from platform_driversWolfram Sang2014-10-201-1/+0
| | | | | | | | | | | | | | | | | | | | | A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | | usb: musb: Use IS_ENABLED for tusb6010Tony Lindgren2014-11-253-10/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This removes the ifdef clutter a bit and saves few lines. It also makes it easier to detect the remaining places where we have conditional building of code done based on if defined for things like DMA. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: Allow multiple glue layers to be built inTony Lindgren2014-11-251-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | There's no reason any longer to keep it as a choice now that the IO access has been fixed. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: Pass fifo_mode in platform dataTony Lindgren2014-11-255-15/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows setting the correct fifo_mode when multiple MUSB glue layers are built-in. Cc: Fabio Baltieri <fabio.baltieri@linaro.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Apelete Seketeli <apelete@seketeli.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: Change end point selection to use new IO accessTony Lindgren2014-11-2511-51/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows the endpoints to work when multiple MUSB glue layers are built in. Cc: Fabio Baltieri <fabio.baltieri@linaro.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Apelete Seketeli <apelete@seketeli.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: Change to use new IO accessTony Lindgren2014-11-257-120/+146
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change to use new IO access. This allows us to build in multiple MUSB glue layers. [ balbi@ti.com : switch to EXPORT_SYMBOL_GPL() fix long lines ] Cc: Fabio Baltieri <fabio.baltieri@linaro.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: Populate new IO functions for blackfinTony Lindgren2014-11-251-0/+43
| | | | | | | | | | | | | | | | | | | | | | | | Populate new IO functions for blackfin Cc: Bryan Wu <cooloney@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: Populate new IO functions for tusb6010Tony Lindgren2014-11-251-0/+41
| | | | | | | | | | | | | | | | | | | | | | | | Let's populate the new IO functions for tusb6010 but not use them yet. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: Add function pointers for IO access functionsTony Lindgren2014-11-252-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MUSB currently breaks badly if we try to build in support for multiple platforms. This also happens if done as loadable modules, which is not nice for distros. Let's fix the issue by adding new struct musb_io for the IO access functions that the platform code can populate. Note that we don't want to use the current ops as that's really platform_data and and set as a const. This should allow eventually adding function pointers also for the DMA code to struct musb_io, but that's a whole different set of patches. For now, let's just fix the PIO access. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: core: Disable the Interrupts till BABBLE is fully handledGeorge Cherian2014-11-181-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Disable the MUSB interrupts till MUSB is recovered fully from BABBLE condition. There are chances that we could get multiple interrupts till the time the babble recover work gets scheduled. Sometimes this could even end up in an endless loop making MUSB itself unusable. Reported-by: Felipe Balbi <balbi@ti.com> Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: musb_cppi41: recognize HS devices in hostmodeSebastian Andrzej Siewior2014-11-181-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a poll loop for max 25us for HS devices. Now guess what, I tested it in gadget mode and forgot about the little detail. Nobody seem to have it noticed… This patch adds the missing logic for hostmode so it is recognized in host and device mode properly. Fixes: 50aea6fca771 ("usb: musb: cppi41: fire hrtimer according to programmed channel length") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: replace hard coded registers with definesRoman Byshko2014-11-181-27/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | musb registers can be dumped using the file regdump which is created in debugfs. Up to now hard coded register addresses are used for that. Different glue layers however have different register addresses. The patch addresses this issue by substituting bare register addresses with defines. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: core: make sure musb is in RPM_ACTIVE on resumeSebastian Andrzej Siewior2014-11-181-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On am335x-evm with musb in host mode and using it as a wakeup source the following happens once the CPU comes out of suspend to ram: |PM: Wakeup source MPU_WAKE |PM: noirq resume of devices complete after 15.453 msecs |PM: early resume of devices complete after 2.222 msecs |PM: resume of devices complete after 507.351 msecs |Restarting tasks ... |------------[ cut here ]------------ |WARNING: CPU: 0 PID: 322 at drivers/usb/core/urb.c:339 usb_submit_urb+0x494/0x4c8() |URB cc0db380 submitted while active |[<c0348e64>] (usb_submit_urb) from [<c0340f94>] (hub_activate+0x2b8/0x49c) |[<c0340f94>] (hub_activate) from [<c03411dc>] (hub_resume+0x14/0x1c) |[<c03411dc>] (hub_resume) from [<c034be10>] (usb_resume_interface.isra.4+0xdc/0x110) |[<c034be10>] (usb_resume_interface.isra.4) from [<c034beb0>] (usb_resume_both+0x6c/0x13c) |[<c034beb0>] (usb_resume_both) from [<c034cca4>] (usb_runtime_resume+0x10/0x14) |[<c034cca4>] (usb_runtime_resume) from [<c02bbd80>] (__rpm_callback+0x2c/0x60) |[<c02bbd80>] (__rpm_callback) from [<c02bbdd4>] (rpm_callback+0x20/0x74) |[<c02bbdd4>] (rpm_callback) from [<c02bcc48>] (rpm_resume+0x380/0x548) |[<c02bcc48>] (rpm_resume) from [<c02bcb00>] (rpm_resume+0x238/0x548) |[<c02bcb00>] (rpm_resume) from [<c02bd08c>] (__pm_runtime_resume+0x64/0x94) |[<c02bd08c>] (__pm_runtime_resume) from [<c034b5a4>] (usb_autopm_get_interface+0x18/0x5c) |[<c034b5a4>] (usb_autopm_get_interface) from [<c03438b8>] (hub_thread+0x10c/0x115c) |[<c03438b8>] (hub_thread) from [<c005a70c>] (kthread+0xbc/0xd8) |---[ end trace 036aa5fe78203142 ]--- |hub 1-0:1.0: activate --> -16 |hub 2-0:1.0: activate --> -16 The reason for this backtrace is the attempt of the USB code to resume the HUB twice and thus enqueue the status URB twice. Alan Stern was a great help by explaining how the USB code supposed to work and what is most likely the problem. The root problem is that after resume the musb runtime-suspend state remains RPM_SUSPENDED. According to git log it RPM was added for the omap2430 platform. If I understand it correct the omap2430 invokes a get on musb once a cable is connected and a put once the cable is gone. In between the device could go auto-idle/off. Not sure what happens when the device goes into suspend but then I guess it was gadget only. On DSPS I see only a get in probe and put in remove function. This would forbid RPM from working but then the devices enterns suspended state anyway :) To get rid of this warning, I set the device state to RPM_ACTIVE which the expected state. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: <stable@vger.kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: gadget: use udc-core's reset notifierFelipe Balbi2014-11-101-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Replace usb_gadget_driver's disconnect with udc-core's reset notifier at bus reset handler. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: try a race-free wakeupSebastian Andrzej Siewior2014-11-053-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Attaching a keyboard, using it as a wakeup via |for f in $(find /sys/devices/ocp.3/47400000.usb -name wakeup) |do | echo enabled > $f |done going into standby | echo standby > /sys/power/state and now a wake up by a pressing a key. What happens is that the system wakes up but the USB device is dead. The USB stack tries to send a few control URBs but nothing comes back. Eventually it gaves up and the device remains dead: |[ 632.559678] PM: Wakeup source USB1_PHY |[ 632.581074] PM: noirq resume of devices complete after 21.261 msecs |[ 632.607521] PM: early resume of devices complete after 10.360 msecs |[ 632.616854] net eth2: initializing cpsw version 1.12 (0) |[ 632.704126] net eth2: phy found : id is : 0x4dd074 |[ 636.704048] libphy: 4a101000.mdio:00 - Link is Up - 1000/Full |[ 638.444620] usb 1-1: reset low-speed USB device number 2 using musb-hdrc |[ 653.713435] usb 1-1: device descriptor read/64, error -110 |[ 669.093435] usb 1-1: device descriptor read/64, error -110 |[ 669.473424] usb 1-1: reset low-speed USB device number 2 using musb-hdrc |[ 684.743436] usb 1-1: device descriptor read/64, error -110 |[ 690.065097] PM: resume of devices complete after 57450.744 msecs |[ 690.076601] PM: Finishing wakeup. |[ 690.076627] Restarting tasks ... It seems that since we got woken up via MUSB_INTR_RESUME the musb_host_finish_resume() callback is executed before the resume-callbacks of the PHY and glue layer are invoked. If I delay it until the glue layer resumed then I don't see this problem. I also move musb_host_resume_root_hub() into that callback since I don't see any reason in doing anything resume-link if there are still pieces not restored. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: core: check link status on resumeSebastian Andrzej Siewior2014-11-051-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The am335x-evmsk support two kinds of suspend: - standby the USB device remains powered while the system goes into suspend - mem the USB device becomes powerless while the system goes into suspend. In the "standby" case the device resumes quickly. In the "mem" case the system hangs for a few seconds. It seems to me that the USB-device has no address (it was disconnected) and the USB stack thinks that it is fully operational and GetPortStatus returns the status from before the suspend so it is not a big help here. This adds a check in the resume path to see if the device mode (A or B) and the speed is the same. If the device went missing between suspend/resume (VBUS went down) then MUSB seems to go into B mode and HS/FS bits are cleared. In that case we clear the port1_status bits and assume a disconnect. Once the stack learns this it does a "logical disconnect" and removes the USB-device quickly. Should the device remain connected during the suspend then MUSB will receives a "CONNECT" interrupt. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: move the OTG state from the USB PHY to the OTG structureAntoine Tenart2014-11-0312-180/+180
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before using the PHY framework instead of the USB PHY one, we need to move the OTG state into another place, since it won't be available when USB PHY isn't used. This patch moves the OTG state into the OTG structure, and makes all the needed modifications in the drivers using the OTG state. [ balbi@ti.com : fix build regressions with phy-tahvo.c, musb_dsps.c, phy-isp1301-omap, and chipidea's debug.c ] Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: core: use ->resume instead ->resume_noirqSebastian Andrzej Siewior2014-11-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 0ec8fd70fb ("USB: musb: fix possible panic while resuming") musb_resume() became musb_resume_early() in order to enable the clocks early on resume. This piece of the resume code was removed later in commit 034917612 ("usb: musb: move clock handling to glue layer"). In between the function was renamed from musb_resume_early() to musb_resume_noirq() by commit commit 48fea9659e ("USB: Rework musb suspend()/resume_early()"). Now I see that first musb_core is resumed followed by phy and glue layer and I ask myself is this really what we intend to do? This kind of revoked the purpose of the first commit (0ec8fd70fb). Because of this and because it looks wrong to resume (core) before the glue layer I push it to the ->resume callback. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: core: remove duplicate check on resourceVarka Bhadram2014-11-031-2/+2
| | | | | | | | | | | | | | | | | | | | | Sanity check on resource happening with devm_ioremap_resource(). Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: dsps: remove duplicate check on resourceVarka Bhadram2014-11-031-3/+0
| | | | | | | | | | | | | | | | | | | | | Sanity check on resource happening with devm_ioremap_resource(). Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: omap2430: use MUSB_DEVCTL_BDEVICESergei Shtylyov2014-11-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | The OMAP2+ MUSB glue layer still uses a bare number for the DEVCTL.B-Device bit in one place, while there's #define MUSB_DEVCTL_BDEVICE for that. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: gadget: remove unnecessary 'driver' argumentFelipe Balbi2014-11-031-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | now that no UDC driver relies on the extra 'driver' argument to ->udc_stop(), we can safely remove it. This commit is based on previous work by Robert Baldyga <r.baldyga@samsung.com> which can be found at [1]; however that patch turned out to have a high probability of regressing many UDC drivers because of a blind search & replace s/driver/$udc->driver/ which caused the 'driver' argument to stop_activity() to be a valid non-NULL pointer when it should be NULL, thus causing UDCs to mistakenly call gadget driver's ->disconnect() callback. [1] http://markmail.org/message/x5zneg4xea4zntab Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: gadget: remove bind/unbind messagesFelipe Balbi2014-11-031-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | now that we provide generic register/unregister debugging messages from udc-core, we can remove the same messages from this driver. Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: gadget: do not rely on 'driver' argumentFelipe Balbi2014-11-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | future patches will remove the extra 'driver' argument to ->udc_stop(), in order to do that, we must make sure that our UDC does not rely on it first. Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: ux500_dma: use dmaengine_xxx() APIsVinod Koul2014-11-031-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | The drivers should use dmaengine_terminate_all() or dmaengine_slave_config() API instead of accessing the device_control which will be deprecated soon Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: musb_dsps: delete unnecessary 'out of memory' messagesPeter Chen2014-11-031-4/+1
| | | | | | | | | | | | | | | | | | | | | The memory subsystem has already had similar message for it. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: tusb6010: delete unnecessary 'out of memory' messagesPeter Chen2014-11-031-3/+1
| | | | | | | | | | | | | | | | | | | | | The memory subsystem has already had similar message for it. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: blackfin: delete unnecessary 'out of memory' messagesPeter Chen2014-11-031-6/+2
| | | | | | | | | | | | | | | | | | | | | The memory subsystem has already had similar message for it. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: musb: omap2430: delete unnecessary 'out of memory' messagesPeter Chen2014-11-031-15/+4
| | | | | | | | | | | | | | | | | | | | | The memory subsystem has already had similar message for it. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
OpenPOWER on IntegriCloud