summaryrefslogtreecommitdiffstats
path: root/drivers/usb/musb/musb_gadget.c
Commit message (Collapse)AuthorAgeFilesLines
* usb: musb: gadget: use common is_selfpoweredPeter Chen2015-01-291-3/+1
| | | | | | | Delete private selfpowered variable, and use common one. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: gadget: use udc-core's reset notifierFelipe Balbi2014-11-101-3/+6
| | | | | | | | | Replace usb_gadget_driver's disconnect with udc-core's reset notifier at bus reset handler. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: move the OTG state from the USB PHY to the OTG structureAntoine Tenart2014-11-031-18/+18
| | | | | | | | | | | | | | | | Before using the PHY framework instead of the USB PHY one, we need to move the OTG state into another place, since it won't be available when USB PHY isn't used. This patch moves the OTG state into the OTG structure, and makes all the needed modifications in the drivers using the OTG state. [ balbi@ti.com : fix build regressions with phy-tahvo.c, musb_dsps.c, phy-isp1301-omap, and chipidea's debug.c ] Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: gadget: remove unnecessary 'driver' argumentFelipe Balbi2014-11-031-4/+2
| | | | | | | | | | | | | | | | | | | | | | now that no UDC driver relies on the extra 'driver' argument to ->udc_stop(), we can safely remove it. This commit is based on previous work by Robert Baldyga <r.baldyga@samsung.com> which can be found at [1]; however that patch turned out to have a high probability of regressing many UDC drivers because of a blind search & replace s/driver/$udc->driver/ which caused the 'driver' argument to stop_activity() to be a valid non-NULL pointer when it should be NULL, thus causing UDCs to mistakenly call gadget driver's ->disconnect() callback. [1] http://markmail.org/message/x5zneg4xea4zntab Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: gadget: remove bind/unbind messagesFelipe Balbi2014-11-031-5/+0
| | | | | | | | now that we provide generic register/unregister debugging messages from udc-core, we can remove the same messages from this driver. Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: gadget: do not rely on 'driver' argumentFelipe Balbi2014-11-031-2/+2
| | | | | | | | | future patches will remove the extra 'driver' argument to ->udc_stop(), in order to do that, we must make sure that our UDC does not rely on it first. Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: gadget: Refactor request completionMichal Sojka2014-09-251-1/+1
| | | | | | | | | | | | | | Use the recently introduced usb_gadget_giveback_request() in favor of direct invocation of the completion routine. All places in drivers/usb/ matching "[-.]complete(" were replaced with a call to usb_gadget_giveback_request(). This was compile-tested with all ARM drivers enabled and runtime-tested for musb. Signed-off-by: Michal Sojka <sojka@merica.cz> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: musb: fix setting JZ4740 gadget periphal mode on resetApelete Seketeli2013-12-201-1/+9
| | | | | | | | | | | | | | | | | | | JZ4740 USB Device Controller is not OTG compatible and does not have DEVCTL register in silicon. During ethernet-over-usb transactions, on reset, musb driver tries to read from DEVCTL and consequently sets device as host (A-Device) instead of peripheral (B-Device), which makes it a composite device to the USB gadget driver. This induces a kernel panic during power down where the USB gadget driver does a null pointer dereference when trying to access the composite device configuration. On reset, do not rely on DEVCTL value for setting gadget peripheral mode. Use is_otg flag instead to set it to B-Device. Signed-off-by: Apelete Seketeli <apelete@seketeli.net> Signed-off-by: Felipe Balbi <balbi@ti.com>
* Merge tag 'v3.13-rc4' into nextFelipe Balbi2013-12-191-0/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux 3.13-rc4 * tag 'v3.13-rc4': (1001 commits) Linux 3.13-rc4 null_blk: mem garbage on NUMA systems during init radeon_pm: fix oops in hwmon_attributes_visible() and radeon_hwmon_show_temp_thresh() Revert "selinux: consider filesystem subtype in policies" igb: Fix for issue where values could be too high for udelay function. i40e: fix null dereference ARM: fix asm/memory.h build error dm array: fix a reference counting bug in shadow_ablock dm space map: disallow decrementing a reference count below zero mm: memcg: do not allow task about to OOM kill to bypass the limit mm: memcg: fix race condition between memcg teardown and swapin thp: move preallocated PTE page table on move_huge_pmd() mfd/rtc: s5m: fix register updating by adding regmap for RTC rtc: s5m: enable IRQ wake during suspend rtc: s5m: limit endless loop waiting for register update rtc: s5m: fix unsuccesful IRQ request during probe drivers/rtc/rtc-s5m.c: fix info->rtc assignment include/linux/kernel.h: make might_fault() a nop for !MMU drivers/rtc/rtc-at91rm9200.c: correct alarm over day/month wrap procfs: also fix proc_reg_get_unmapped_area() for !MMU case ... Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: fix musb gadget to enable OTG mode conditionallyApelete Seketeli2013-11-251-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The musb driver is usable in host, gadget or dual role mode depending on the kernel configuration. However, the musb gadget part of the driver is enabling OTG mode whether the driver is built for dual role or gadget only mode. This induces a bug for gadget only USB device controllers where the kernel tries to use Host Negotiation Protocol with such controllers, which causes a panic. This behaviour is now fixed by enabling OTG mode only when musb driver is built for dual role mode. Signed-off-by: Apelete Seketeli <apelete@seketeli.net> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: gadget: add "maxpacket_limit" field to struct usb_epRobert Baldyga2013-12-171-3/+3
|/ | | | | | | | | | | | | | | | | | | | | | | | This patch adds "maxpacket_limit" to struct usb_ep. This field contains maximum value of maxpacket supported by driver, and is set in driver probe. This value should be used by autoconfig() function, because value of field "maxpacket" is set to value from endpoint descriptor when endpoint becomes enabled. So when autoconfig() function will be called again for this endpoint, "maxpacket" value will contain wMaxPacketSize from descriptior instead of maximum packet size for this endpoint. For this reason this patch adds new field "maxpacket_limit" which contains value of maximum packet size (which defines maximum endpoint capabilities). This value is used in ep_matches() function used by autoconfig(). Value of "maxpacket_limit" should be set in UDC driver probe function, using usb_ep_set_maxpacket_limit() function, defined in gadget.h. This function set choosen value to both "maxpacket_limit" and "maxpacket" fields. This patch modifies UDC drivers by adding support for maxpacket_limit. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* Merge 3.12-rc6 into usb-next.Greg Kroah-Hartman2013-10-191-0/+3
|\ | | | | | | | | | | We want those USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Revert "usb: musb: gadget: fix otg active status flag"Greg Kroah-Hartman2013-10-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 9b0a1de3c85d99d881c86a29b3d52da7b9c7bd61. Aaro writes: With v3.12-rc4 I can no longer connect to N800 (OMAP2) with USB (peripheral, g_ether). According to git bisect this is caused by: 9b0a1de3c85d99d881c86a29b3d52da7b9c7bd61 is the first bad commit So revert this patch, as Felipe says: It's unfortunate that tusb6010 is so messed up Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: musb: start musb on the udc side, tooSebastian Andrzej Siewior2013-10-111-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I have am335x-evm with one port running in OTG mode. Since commit fe4cb09 ("usb: musb: gadget: remove hcd initialization") the loaded gadget does non pop up on the host. All I see is |usb 4-5: new high-speed USB device number 52 using ehci-pci |usb 4-5: device descriptor read/64, error -110 Since a later commit 2cc65fe ("usb: musb: add musb_host_setup() and musb_host_cleanup()) the gadget shows up on the host again but only in OTG mode (because we have the host init code running). It does not work in device only mode. If running in OTG mode and the gadget is removed and added back (rmmod followed by modprobe of a gadget) then the same error is pops up on the host side. This patch ensures that the gadget side also executes musb_start() which puts the chip in "connect accept" mode. With this change the device works in OTG & device mode and the gadget can be added & removed multiple times. A device (if musb is in OTG mode acting as a host) is only recognized if it is attached during module load (musb_hdrc module). After the device unplugged and plugged again the host does not recognize it. We get a buch of errors if musb running in OTG mode, attached to a host and no gadget is loaded. Bah. This is one step forward. Host & device only mode should work. I will look at OTG later. I looked at this before commit fe4cb09 and OTG wasn't working there perfectly so I am not sure that it is a regression :) Cc: <stable@vger.kernel.org> # v3.11 Cc: Daniel Mack <zonque@gmail.com> Cc: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: Remove unnecessary semicolonsJoe Perches2013-10-111-1/+1
|/ | | | | | | These aren't necessary after switch and if blocks. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: musb: gadget: fix otg active status flagBin Liu2013-09-251-1/+0
| | | | | | | | In gadget mode, musb->is_active should be set only when connected to the host. musb_g_reset() already takes care of it. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: fix otg default stateBin Liu2013-09-171-0/+4
| | | | | | | | | | | | | | | | | | Right after the musb_hdrc driver is loaded, the otg default state is a_idle, and Mode=Host, which are set by musb_host_setup(). This causes the following kernel message during musb gadget enumeration. CAUTION: musb: Babble Interrupt Occurred This patch sets the otg default state to b_idle, and its Mode to Peripheral. It has been validated on TI AM335x GP EVM USB0 port with g_zero. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: only remove host/udc if it has been addedSebastian Andrzej Siewior2013-08-271-0/+2
| | | | | | | | | | | | | | musb_shutdown() removes always USB host and device. musb_init_controller() adds host and device depending on port_mode. If port mode is set to HOST then the removal of UDC leads only to: |(NULL device *): gadget not registered. and nothing else happens. If port mode is set to DEVICE and we remove the host then we oops in usb_remove_hcd(). This patch ensures that we only remove host in OTG/host mode and device only in OTG/device mode to avoid any trouble. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: avoid null pointer dereference in debug loggingMaarten ter Huurne2013-08-271-1/+2
| | | | | | | | | Since commit 511f3c53 (usb: gadget: udc-core: fix a regression during gadget driver unbinding) usb_gadget_remove_driver will pass NULL for the driver argument. Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: honour the return value of dma_map_single()Sebastian Andrzej Siewior2013-08-271-1/+9
| | | | | | | | Since dma_map_single() may fail it is good to actually check the return code to see if it succeeded. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: Use is_cppi_enabled() and tusb_dma_omap() instead of the ifdefSebastian Andrzej Siewior2013-08-131-40/+42
| | | | | | | | | | This patch makes use of the two function is_cppi_enabled() and tusb_dma_omap() instead of the ifdef for the proper DMA implementation setup code. It basically shifts the code right by one indention level and adds a few line breaks once the chars are crossed. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: unmap reqs in musb_gadget_queue()'s error caseSebastian Andrzej Siewior2013-07-291-2/+3
| | | | | | | | | | If the descriptor is missing the reqeust is never unmapped. This patch changes this and renames the cleanup label to unlock since there is no cleanup done. The cleanup would revert the allocation of ressource (i.e. this dma mapping) but it does not, it simply unlocks and returns. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: gadget: remove hcd initializationDaniel Mack2013-05-281-10/+0
| | | | | | | | | This will be done from a more appropriate location and as it doesn't work anyway, it can safely be removed before the other changes. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
* Merge tag 'usb-for-v3.10' of ↵Greg Kroah-Hartman2013-04-051-140/+16
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.10 merge window Here is the big Gadget & PHY pull request. Many of us have been really busy lately getting multiple drivers to a better position. Since this pull request is so large, I will divide it in sections so it's easier to grasp what's included. - cleanups: . UDC drivers no longer touch gadget->dev, that's now udc-core responsibility . Many more UDC drivers converted to usb_gadget_map/unmap_request() . UDC drivers no longer initialize DMA-related fields from gadget's device structure . UDC drivers don't touch gadget.dev.driver directly . UDC drivers don't assign gadget.dev.release directly . Removal of some unused DMA_ADDR_INVALID . Introduction of CONFIG_USB_PHY . All phy drivers have been moved to drivers/usb/phy and renamed to a common naming scheme . Fix PHY layer so it never returns a NULL pointer, also fix all callers to avoid using IS_ERR_OR_NULL() . Sparse fixes all over the place . drivers/usb/otg/ has been deleted . Marvel drivers (mv_udc, ehci-mv, mv_otg and mv_u3d) improved clock usage - new features: . UDC core now provides a generic way for tracking and reporting UDC's state (not attached, resuming, suspended, addressed, default, etc) . twl4030-usb learned that it shouldn't be enabled during init . Full DT support for DWC3 has been implemented . ab8500-usb learned about pinctrl framework . nop PHY learned about DeviceTree and regulators . DWC3 learned about suspend/resume . DWC3 can now be compiled in host-only and gadget-only (as well as DRD) configurations . UVC now enables streaming endpoint based on negotiated speed . isp1301 now implements the PHY API properly . configfs-based interface for gadget drivers which will lead to the removal of all code which just combines functions together to build functional gadget drivers. . f_serial and f_obex were converted to new configfs interface while maintaining old interface around. - non-critical fixes: . UVC gadget driver got fixes for Endpoint usage and stream calculation . ab8500-usb fixed unbalanced clock and regulator API usage . twl4030-usb got a fix for when OMAP3 is booted with cable connected . fusb300_udc got a fix for DMA usage . UVC got fixes for two assertions of the USB Video Class Compliance specification revision 1.1 . build warning issues caused by recent addition of __must_check to regulator API These are all changes which deserve a mention, all other changes are related to these one or minor spelling fixes and other similar tasks. Signed-of-by: Felipe Balbi <balbi@ti.com>
| * usb: musb: gadget: use platform callback to enable vbusGrazvydas Ignotas2013-04-021-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | On some platform configurations (like OMAP3+twl4030) it's the platform code that enables VBUS, not OTG transceiver, so call vbus platform callback instead, it will then call the transceiver if needed. This fixes a use case where USB cable is plugged first and gadget driver is loaded later after that. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: musb: gadget: clear gadget_driver when gadget is stoppedGrazvydas Ignotas2013-03-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Some musb glue drivers use gadget_driver pointer to know if any gadget drivers are loaded at some moment and base further decisions on it, like to do runtime suspend/resume or not. Right now the pointer is left alone on stop and OMAP musb glue later does wrong runtime_pm decisions because of it. Clear the gadget_driver pointer on remove, it's invalid after stop anyway. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: otg: prefix otg_state_string with usb_Felipe Balbi2013-03-181-4/+4
| | | | | | | | | | | | | | | | | | | | all other functions under drivers/usb/ start with usb_, let's do the same thing. This patch is in preparation for moving otg_state_string to usb-common.c and deleting otg.c completely. Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: musb: gadget: don't assign gadget.dev.release directlyFelipe Balbi2013-03-181-8/+0
| | | | | | | | | | | | | | udc-core provides a better way to handle release methods, let's use it. Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: musb: gadget: remove unnecessary initializationsFelipe Balbi2013-03-181-2/+0
| | | | | | | | | | | | | | udc-core now sets dma-related and parent fields for us, we don't need to do it ourselves. Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: musb: gadget: fix compile warningFelipe Balbi2013-03-181-6/+9
| | | | | | | | | | | | | | | | | | Fix the following compile warning: drivers/usb/musb/musb_gadget.c: In function ‘rxstate’: drivers/usb/musb/musb_gadget.c:714:22: warning: comparison of distinct pointer types lacks a cast [enabled by default] Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: musb: gadget: delete wrong commentFelipe Balbi2013-03-181-108/+0
| | | | | | | | | | | | | | | | | | Those comments haven't been updated for a long time, so much that they don't make sense anymore. Best to remove them. Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: gadget: drop now unnecessary flagFelipe Balbi2013-03-181-1/+0
| | | | | | | | | | | | | | | | | | | | We don't need the ->register_my_device flag anymore because all UDC drivers have been properly converted. Let's remove every history of it. Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: musb: gadget: let udc-core manage gadget-devFelipe Balbi2013-03-181-9/+1
| | | | | | | | | | | | | | By simply setting a flag, we can delete a little boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: musb: gadget: do *unmap_dma_buffer* only for valid DMA addrKishon Vijay Abraham I2013-03-181-2/+7
|/ | | | | | | | | | | | musb does not use DMA buffer for ep0 but it uses the same giveback function *musb_g_giveback* for all endpoints (*musb_g_ep0_giveback* calls *musb_g_giveback*). So for ep0 case request.dma will be '0' and will result in kernel OOPS if tried to *unmap_dma_buffer* for requests in ep0. Fixed it by doing *unmap_dma_buffer* only for valid DMA addr and checking that musb_ep->dma is valid when unmapping. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: set TXMAXP and AUTOSET for full speed bulk in device modesupriya karanth2013-01-101-3/+19
| | | | | | | | | | | | | | | | | | | | | | | The TXMAXP register is not set correctly for full speed bulk case when the can_bulk_split() is used. Without this PIO transfers will not take place correctly The "mult" factor needs to be updated correctly for the can_bulk_split() case The AUTOSET bit in the TXCSR is not being set if the "mult" factor is greater than 0 for the High Bandwidth ISO case. But the "mult" factor is also greater than 0 in case of Full speed bulk transfers with the packet splitting in TXMAXP register Without the AUTOSET the DMA transfers will not progress in mode1 [ balbi@ti.com : add braces to both branches ] Signed-off-by: supriya karanth <supriya.karanth@stericsson.com> Signed-off-by: Praveena NADAHALLY <praveen.nadahally@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: remove use of __devinitBill Pemberton2012-11-211-3/+3
| | | | | | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Geoff Levand <geoff@infradead.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Olav Kongas <ok@artecdesign.ee> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 3.7-rc6 into usb-next.Greg Kroah-Hartman2012-11-161-4/+26
|\ | | | | | | | | | | | | | | | | | | This resolves a conflict with these files: drivers/usb/early/ehci-dbgp.c drivers/usb/host/ehci-ls1x.c drivers/usb/host/ohci-xls.c drivers/usb/musb/ux500.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Revert "usb: musb: use DMA mode 1 whenever possible"Felipe Balbi2012-10-261-4/+26
| | | | | | | | | | | | | | | | | | | | | | This reverts commit 4f3e8d263d34e52e75b5adfa14811467d3033d8e. it turns out that current implementation of Mode 1 DMA added a few regressions to some users, so we need to revert this patch and let author work on a better version of Mode 1 DMA support. Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: musb: Perform only write access on MUSB_INTRTXESebastian Andrzej Siewior2012-10-311-10/+7
| | | | | | | | | | | | | | | | | | | | | | | | This is part of the workaround for AM35x advisory Advisory 1.1.20. The advisory says that the IPSS bridge can't handle 8 & 16 bit read access. An 16bit read access to MUSB_INTRTXE results in an 32bit read access which also reads INTRRX and therefore may lose interrupts. This patch uses a shadow register of MUSB_INTRTXE so we only perform write access to it. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: musb: Perform only write access on MUSB_INTRRXESebastian Andrzej Siewior2012-10-311-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | This is part of the workaround for AM35x advisory Advisory 1.1.20. The advisory says that the IPSS bridge can't handle 8 & 16 bit read access. An 16bit read access to MUSB_INTRRXE results in an 32bit read access which also reads INTRUSB and therefore may lose interrupts. This patch uses a shadow register of MUSB_INTRRXE so we only perform write access to it. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: musb: avoid FADDR read accessSebastian Andrzej Siewior2012-10-311-2/+1
|/ | | | | | | | | | | This is part of the workaround for AM35x advisory Advisory 1.1.20. The advisory says that the IPSS bridge can't handle 8 & 16 bit read access. An 8bit read access to FADDR results in an 32bit read access which also reads INTRTX and therefore may lose interrupts. This patch removes any reads to FADDR as they are not really required. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: Remove redundant if statementRoger Quadros2012-08-091-19/+15
| | | | | | | Remove unnecessary if condition. No change in logic. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: drop useless board_mode usageFelipe Balbi2012-08-091-53/+30
| | | | | | | | we are compiling the driver always with full OTG capabilities, so that board_mode trick becomes useless. Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: use DMA mode 1 whenever possibleRoger Quadros2012-08-071-26/+4
| | | | | | | | | | | | | | Do not rely on any hints from gadget drivers and use DMA mode 1 whenever we expect data of at least the endpoint's packet size and have not yet received a short packet. The last packet if short is always transferred using DMA mode 0. This patch fixes USB throughput issues in mass storage mode for host to device transfers. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: gadget: don't program dma for zero byte txAjay Kumar Gupta2012-08-031-1/+1
| | | | | | | | This is to reduce the overhead of dma programming for zero byte transmit as same can be done using pio mode. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: gadget: use variables according to their names in rxstate()Sergei Shtylyov2012-08-031-12/+13
| | | | | | | | | | | | In rxstate(), improper types are given to 'fifo_count' and 'len' variables, and these variables are not used in accordance to their names (up to the certain point), i.e. 'len' to hold the size of a packet in the RX FIFO, and 'fifo_count' to hold a difference between 'request->length' and 'request->actual'... Interchange the variables up to the point where their use starts to make sense again. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* Merge tag 'musb-for-v3.6' of ↵Greg Kroah-Hartman2012-07-051-0/+14
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next usb: musb: patches for v3.6 merge window Just two patches here: First we have a fix to disable DMA in case DMA channel request fails. Second, there's a fix for situations where the user kills musb (by rmmod or any other means) while a transfer is on the fly. In such cases, we could be led into a NULL pointer dereference due to endpoint being disabled and endpoint descriptor being NULL.
| * usb: musb: handle nuked ep dma interruptVikram Pandita2012-06-041-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | User can trigger disabling of gadget at run time while the transfers are going on. Eg: 1: rmmod of musb driver while transfers are going on Eg: 2: On android doing: echo 0 > /sys/class/android_usb/android0/enable While a big file transfer is going on via PTP/MTP. In such a case, musb_gadget_disable() calls nuke() but the dma interrupt may still happen for an endpoint since hw would raise the interrupt in anycase. This can result in a NULL pointer access crash: [ 314.030426] PC is at txstate+0x74/0x20c [ 314.034759] LR is at musb_g_tx+0x140/0x204 [ 314.039489] pc : [<c03506f4>] lr : [<c0350bcc>] psr: 20000193 [ 314.039520] sp : c783bc68 ip : 00000002 fp : c783bc9c [ 314.052429] r10: 00000018 r9 : 00000000 r8 : 00000200 [ 314.058258] r7 : 00000000 r6 : fc0ab130 r5 : c781a410 r4 : c6caf640 [ 314.065643] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : c781a000 [ 315.083251] Backtrace: [ 315.086242] [<c0350680>] (txstate+0x0/0x20c) from [<c0350bcc>] (musb_g_tx+0x140/0x204) [ 315.095123] [<c0350a8c>] (musb_g_tx+0x0/0x204) from [<c034eb00>] (musb_dma_completion+0x40/0x54) [ 315.104980] [<c034eac0>] (musb_dma_completion+0x0/0x54) from [<c0351e6c>] (dma_controller_irq+0x118/0x184) [ 315.115661] [<c0351d54>] (dma_controller_irq+0x0/0x184) from [<c00d86b8>] (handle_irq_event_percpu+0x54/0x188) So put protection in code to handle possiblity of getting an interrupt for an endpoint that might have been already nuked. Reported-by: Todd Poynor <toddpoynor@google.com> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: musb_gadget: fix crash caused by dangling pointerGrazvydas Ignotas2012-06-041-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | usb_ep_ops.disable must clear external copy of the endpoint descriptor, otherwise musb crashes after loading/unloading several gadget modules in a row: Unable to handle kernel paging request at virtual address bf013730 pgd = c0004000 [bf013730] *pgd=8f26d811, *pte=00000000, *ppte=00000000 Internal error: Oops: 7 [#1] Modules linked in: g_cdc [last unloaded: g_file_storage] CPU: 0 Not tainted (3.2.17 #647) PC is at musb_gadget_enable+0x4c/0x24c LR is at _raw_spin_lock_irqsave+0x4c/0x58 [<c027c030>] (musb_gadget_enable+0x4c/0x24c) from [<bf01b760>] (gether_connect+0x3c/0x19c [g_cdc]) [<bf01b760>] (gether_connect+0x3c/0x19c [g_cdc]) from [<bf01ba1c>] (ecm_set_alt+0x15c/0x180 [g_cdc]) [<bf01ba1c>] (ecm_set_alt+0x15c/0x180 [g_cdc]) from [<bf01ecd4>] (composite_setup+0x85c/0xac4 [g_cdc]) [<bf01ecd4>] (composite_setup+0x85c/0xac4 [g_cdc]) from [<c027b744>] (musb_g_ep0_irq+0x844/0x924) [<c027b744>] (musb_g_ep0_irq+0x844/0x924) from [<c027a97c>] (musb_interrupt+0x79c/0x864) [<c027a97c>] (musb_interrupt+0x79c/0x864) from [<c027aaa8>] (generic_interrupt+0x64/0x7c) [<c027aaa8>] (generic_interrupt+0x64/0x7c) from [<c00797cc>] (handle_irq_event_percpu+0x28/0x178) ... Cc: stable@vger.kernel.org # v3.1+ Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: core: hcd: make hcd->irq unsignedFelipe Balbi2012-03-011-1/+1
| | | | | | | | | | | | There's really no point in having hcd->irq as a signed integer when we consider the fact that IRQ 0 means NO_IRQ. In order to avoid confusion, make hcd->irq unsigned and fix users who were passing -1 as the IRQ number to usb_add_hcd. Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OpenPOWER on IntegriCloud