summaryrefslogtreecommitdiffstats
path: root/drivers/usb/misc/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* usb: misc: Add driver for usb4604Stephen Boyd2016-08-091-0/+1
| | | | | | | | | | | | | | | This is a minimal driver to support bringing a usb4604 device from microchip out of reset and into hub mode. The usb4604 device is related to the usb3503 device, but it didn't seem close enough to warrant putting both into the same file. This patch borrows some of the usb3503 structure and trims it down to just handle the optional reset gpio and adds the i2c command to put the device into hub mode. Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/00001716A.pdf Cc: <devicetree@vger.kernel.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge branch 'for-4.8/hid-led' into for-linusJiri Kosina2016-07-281-1/+0
|\ | | | | | | | | Conflicts: drivers/hid/hid-thingm.c
| * usb: misc: remove outdated USB LED driverHeiner Kallweit2016-06-171-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The USB LED driver exposes a undocumented sysfs interface and doesn't use the standard kernel LED subsystem. It supports three devices: Delcom Visual Signal Indicator The driver supports generation 1 of the device only which was manufactured until 2008. Remove support for this device completely. Riso Kagaku RGB LED + Dream Cheeky Webmail Notifier These devices are HID compliant and are supported by a new USB LED driver under drivers/hid utilizing the kernel LED subsystem. So let's remove the old USB LED driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | usb: Add driver for UCSIHeikki Krogerus2016-04-291-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | USB Type-C Connector System Software Interface (UCSI) is specification that defines the registers and data structures that can be used to control USB Type-C ports on a system. UCSI is used on several Intel Broxton SoC based platforms. Things that UCSI can be used to control include at least USB Data Role swapping, Power Role swapping and controlling of Alternate Modes on top of providing general details about the port and the partners that are attached to it. The initial purpose of the UCSI driver is to make sure USB is in host mode on desktop and server systems that are USB dual role capable, and provide UCSI interface. The goal is to integrate the driver later to an USB Type-C framework for Linux kernel, and at the same time add support for more extensive USB Type-C port control that UCSI offers, for example data role swapping, power role swapping, Alternate Mode control etc. The UCSI specification is public can be obtained from here: http://www.intel.com/content/www/us/en/io/universal-serial-bus/usb-type-c-ucsi-spec.html Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: Add driver for Altus Metrum ChaosKey device (v2)Keith Packard2015-03-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a hardware random number generator. The driver provides both a /dev/chaoskeyX entry and hooks the entropy source up to the kernel hwrng interface. More information about the device can be found at http://chaoskey.org The USB ID for ChaosKey was allocated from the OpenMoko USB vendor space and is visible as 'USBtrng' here: http://wiki.openmoko.org/wiki/USB_Product_IDs v2: Respond to review from Oliver Neukum <oneukum@suse.de> * Delete extensive debug infrastructure and replace it with calls to dev_dbg. * Allocate I/O buffer separately from device structure to obey requirements for non-coherant architectures. * Initialize mutexes before registering device to ensure that open cannot be invoked before the device is ready to proceed. * Return number of bytes read instead of -EINTR when partial read operation is aborted due to a signal. * Make sure device mutex is unlocked in read error paths. * Add MAINTAINERS entry for the driver Signed-off-by: Keith Packard <keithp@keithp.com> Cc: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: Add LVS Test device driverPratyush Anand2014-07-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OTG3 and EH Compliance Plan 1.0 talks about Super Speed OTG Verification system (SS-OVS) which consists of an excersizer and analyzer. USB Compliance Suite from Lecroy or Ellisys can act as such SS-OVS for Link Layer Validation (LVS). Some modifications are needed for an embedded Linux USB host to pass all these tests. Most of these tests require just Link to be in U0. They do not work with default Linux USB stack since, default stack does port reset and then starts sending setup packet, which is not expected by Link Layer Validation (LVS) device of Lecroy Compliance Suit. Then, There are many Link Layer Tests which need host to generate specific traffic. This patch supports specific traffic generation cases. As of now all the host Lecroy Link Layer-USBIF tests (except TD7.26) passes with this patch for single run using Lecroy USB Compliance Suite Version 1.98 Build 239 and Lecroy USB Protocol Analyzer version 4.80 Build 1603. Therefore patch seems to be a good candidate for inclusion. Further modification can be done on top of it. lvstest driver will not bind to any device by default. It can bind manually to a super speed USB host controller root hub. Therefore, regular hub driver must be unbound before this driver is bound. For example, if 2-0:1.0 is the xhci root hub, then execute following to unbind hub driver. echo 2-0:1.0 > /sys/bus/usb/drivers/hub/unbind Then write Linux Foundation's vendor ID which is used by root hubs and SS root hub's device ID into new_id file. Writing IDs into new_id file will also bind the lvs driver with any available SS root hub interfaces. echo "1D6B 3" > /sys/bus/usb/drivers/lvs/new_id Now connect LVS device with root hub port. Test case specific traffic can be generated as follows whenever needed: 1. To issue "Get Device descriptor" command for TD.7.06: echo > /sys/bus/usb/devices/2-0\:1.0/get_dev_desc 2. To set U1 timeout to 127 for TD.7.18 echo 127 > /sys/bus/usb/devices/2-0\:1.0/u1_timeout 3. To set U2 timeout to 0 for TD.7.18 echo 0 > /sys/bus/usb/devices/2-0\:1.0/u2_timeout 4. To issue "Hot Reset" for TD.7.29 echo > /sys/bus/usb/devices/2-0\:1.0/hot_reset 5. To issue "U3 Entry" for TD.7.35 echo > /sys/bus/usb/devices/2-0\:1.0/u3_entry 6. To issue "U3 Exit" for TD.7.36 echo > /sys/bus/usb/devices/2-0\:1.0/u3_exit Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: misc: EHSET Test Fixture device driver for host complianceManu Gautam2013-07-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | An Embedded Host High-Speed Electrical Test (EHSET) test fixture is used to initiate test modes on a host controller in order to perform the high speed electrical testing procedure for USB-IF compliance. When this test fixture is connected to a host, it can enumerate as one of several selectable VID/PID pairs, each corresponding to one of the following test modes: * TEST_SE0_NAK * TEST_J * TEST_K * TEST_PACKET * HS_HOST_PORT_SUSPEND_RESUME * SINGLE_STEP_GET_DEV_DESC * SINGLE_STEP_SET_FEATURE The USB EHSET procedure can be found here: http://www.usb.org/developers/onthego/EHSET_v1.01.pdf Signed-off-by: Manu Gautam <mgautam@codeaurora.org> [jackp@codeaurora.org: imported from commit 073c9409 on codeaurora.org; minor cleanup and updated author email] Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: misc: remove CONFIG_USB_DEBUG from MakefileGreg Kroah-Hartman2013-07-231-3/+0
| | | | | | | Now that no usb misc driver is looking for CONFIG_USB_DEBUG, or DEBUG, don't enable it in the Makefile, as that's pointless. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: misc: Add USB3503 High-Speed Hub ControllerDongjin Kim2013-01-111-0/+1
| | | | | | | | | | | | This patch adds new driver of SMSC USB3503 USB 2.0 hub controller with HSIC upstream connectivity and three USB 2.0 downstream ports. The specification can be found from 'http://www.smsc.com/index.php?tid=295&pid=325'. The current version have been tested very basic features switching the modes, HUB-MODE and STANDBY-MODE. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/miscRene Buergel2012-09-261-0/+1
| | | | | | | | | | This patch - moves drivers/usb/serial/ezusb.c to drivers/usb/misc/ - renamed CONFIG_USB_EZUSB to CONFIG_USB_EZUSB_FX2 to avoid build errors - adapts Makefiles and Kconfigs switching from bool to tristate for CONFIG_USB_EZUSB_FX2 Signed-off-by: René Bürgel <rene.buergel@sohard.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: makefile cleanupmatt mooney2010-10-221-22/+22
| | | | | | | | | | | | | | | For all modules, change <module>-objs to <module>-y; remove if-statements and replace with lists using the kbuild idiom; move flags to the top of the file; and fix alignment while trying to maintain the original scheme in each file. None of the dependencies are modified. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: change to new flag variablematt mooney2010-10-221-3/+1
| | | | | | | | | Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add driver for Meywa-Denki & Kayac YUREXTomoki Sekiyama2010-10-221-0/+1
| | | | | | | | | | | | | | Meywa-Denki/Kayac YUREX is a leg-shakes sensor device. See http://bbu.kayac.com/en/about/ for further information. This driver support read/write the leg-shakes counter in the device via a device file /dev/yurex[0-9]*. [minor coding style cleanups fixed by gregkh] Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: vstusb.c: removal of driver for Vernier Software & Technology, Inc., ↵Dennis O'Brien2010-03-021-1/+0
| | | | | | | | | | | | | devices and spectrometers This patch removes the vstusb driver and support from the Linux tree. This driver provided support for Vernier Software & Technology devices and spectrometers (Ocean Optics). This driver is being replaced by a user space - libusb - implementation. Signed-off-by: Jim Collar <jim.collar@eqware.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove the berry_charge driverGreg Kroah-Hartman2010-03-021-1/+0
| | | | | | | | | | | The Barry project's userspace program, bcharge, can better handle this device and functionality, and it also works with the latest phones, which this driver does not support. So remove it, as the userspace code should be used instead. Cc: Chris Frey <cdfrey@foursquare.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove phidget drivers from kernel tree.Greg Kroah-Hartman2009-03-241-4/+0
| | | | | | | | | | | | | These devices are better controlled with the LGPL userspace library found at: http://www.phidgets.com/downloads.php?os_id=3 and full documentation at: http://www.phidgets.com/documentation/web/cdoc/index.html Cc: Chester Fitchett <fitchett@phidgets.com> Acked-by: Sean Young <sean@mess.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: vstusb.c : new driver for spectrometers used by Vernier Software & ↵Stephen Ware2008-10-171-0/+1
| | | | | | | | | | | | | | | | Technology, Inc. This patch adds the vstusb driver to the drivers/usb/misc directory. This driver provides support for Vernier Software & Technology spectrometers, all made by Ocean Optics. The driver provides both IOCTL and read()/write() methods for sending raw data to spectrometers across the bulk channel. Each method allows for a configured timeout. From: Stephen Ware <stephen.ware@eqware.net> Signed-off-by: Dennis O'Brien <dennis.obrien@eqware.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Added driver for a Delcom USB 7-segment LED DisplayHarrison Metzger2008-10-171-0/+1
| | | | | | | | Added basic support for a Delcom USB 7-segment LED Display Signed-off by: Harrison Metzger <harrisonmetz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: auerswald: remove driver (obsolete)Wolfgang Mües2008-08-131-1/+0
| | | | | | | | | | | | | | | | | | | | | | | This patch removes the auerswald USB driver from the linux kernel 2.6.26. This driver was included into the kernel mainly to connect to the ISDN framework. This was done in linux 2.4.x. For 2.6.x, due to the fragile and moving ISDN support, this connection was never realized, and the only use of this driver was for device configuration. In the age of DSL, the demand of ISDN support is getting very low. Meanwhile, with the advent of libusb, an userspace driver was done for the device configuration which works fine for linux and mac. (Thanks to the libusb developers!). The userspace driver is downloadable from the auerswald web site. So this driver is obsolete now and has to be removed. Many thanks to all developers which helped me to bring this driver up and working. Signed-off-by: Wolfgang Muees <wolfgang@iksw-muees.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Firmware loader driver for USB Apple iSight cameraMatthew Garrett2008-05-291-0/+1
| | | | | | | | | | | | | | | | | Uninitialised Apple iSight drivers present with a distinctive USB ID. Once firmware has been uploaded, they disconnect and reconnect with a new ID. At this point they can be driven by the uvcvideo driver. As this is unique to the Apple cameras and not functionality shared by any other UVC devices, it makes sense to provide the firmware loading functionality in a separate driver. This driver will read an isight.fw file extracted from the Apple driver using the tools at http://bersace03.free.fr/ift/ and upload it to the camera. It will also handle the case where the device loses its firmware during hibernation and must have it reloaded. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add driver for iowarrior devices.Greg Kroah-Hartman2007-02-231-0/+1
| | | | | | | | | | The ioctl is commented out for now, until we verify some userspace application issues. Cc: Christian Lucht <lucht@codemercs.com> Cc: Robert Marquardt <marquardt@codemercs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Driver to charge USB blackberry devicesGreg Kroah-Hartman2007-02-161-0/+1
| | | | | | | | | | | | | A simple driver to turn on the charging capability of a USB BlackBerry device when it is plugged into the machine. It does not bind to the device, so all userspace programs can still sync properly with it. Note, if CONFIG_USB_SUSPEND is enabled, it can play havoc with this device as the power to the port will be shut down. This device id will have to be added to the global blacklist table when it is created. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: build the appledisplay driverAdrian Bunk2006-12-011-0/+1
| | | | | | | | | We do already have both the code and a config option, so why not build this driver? ;-) Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: move trancevibrator.c to the proper usb directoryGreg Kroah-Hartman2006-10-171-0/+1
| | | | | | | | | | It's not a input driver, so it doesn't belong in the input directory. Cc: Sam Hocevar <sam@zoy.org> Cc: Dmitry Torokhov <dtor@insightbb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ftdi-elan: client driver for ELAN Uxxx adaptersTony Olech2006-09-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This "ftdi-elan" module is one half of the "driver" for ELAN's Uxxx series adapters which are USB to PCMCIA CardBus adapters. Currently only the U132 adapter is available and it's module is called "u132-hcd". When the USB hot plug subsystem detects a Uxxx series adapter it should load this module. Upon a successful device probe() the jtag device file interface is created and the status workqueue started up. The jtag device file interface exists for the purpose of updating the firmware in the Uxxx series adapter, but as yet it had never been used. The status workqueue initializes the Uxxx and then sits there polling the Uxxx until a supported PCMCIA CardBus device is detected it will start the command and respond workqueues and then load the module that handles the device. This will initially be only the u132-hcd module. The status workqueue then just polls the Uxxx looking for card ejects. The command and respond workqueues implement a command sequencer for communicating with the firmware on the other side of the FTDI chip in the Uxxx. This "ftdi-elan" module exports some functions to interface with the sequencer. Note that this module is a USB client driver. Note that the "u132-hcd" module is a (cut-down OHCI) host controller. Thus we have a topology with the parent of a host controller being a USB client! This really stresses the USB subsystem semaphore/mutex handling in the module removal. Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add ADU support for Ontrak ADU devicesSteven Haigh2006-09-271-0/+1
| | | | | | | | | | This patch adds support for Ontrak ADU USB devices. Fixed for printk issues by Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Steven Haigh <netwiz@crc.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Put phidgets driver in a sysfs classSean Young2006-09-271-0/+1
| | | | | | | | | This patch creates a device class phidget and add the phidget drivers to them. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add driver for PhidgetMotorControlSean Young2006-09-271-0/+1
| | | | | | | | | This driver add support for the Phidgets Inc., MotorControl via sysfs. Also some minor fixes for the InterfaceKit. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: rename Cypress CY7C63xxx driver to proper name and fix up some ↵Oliver Bock2006-07-121-1/+1
| | | | | | | | | | | | | | tiny things This is a new driver for the Cypress CY7C63xxx mirco controller series. It currently supports the pre-programmed CYC63001A-PC by AK Modul-Bus GmbH. It's based on a kernel 2.4 driver (cyport) by Marcus Maul which I ported to kernel 2.6 using sysfs. I intend to support more controllers of this family (and more features) as soon as I get hold of the required IDs etc. Please see the source code's header for more information. Signed-off-by: Oliver Bock <o.bock@fh-wolfenbuettel.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: new driver for Cypress CY7C63xxx mirco controllersOliver Bock2006-06-211-0/+1
| | | | | | | | | | | | This is a new driver for the Cypress CY7C63xxx mirco controller series. It currently supports the pre-programmed CYC63001A-PC by AK Modul-Bus GmbH. It's based on a kernel 2.4 driver (cyport) by Marcus Maul which I ported to kernel 2.6 using sysfs. I intend to support more controllers of this family (and more features) as soon as I get hold of the required IDs etc. Please see the source code's header for more information. Signed-off-by: Oliver Bock <o.bock@fh-wolfenbuettel.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] Driver for Apple Cinema Displayakpm@osdl.org2006-06-211-0/+1
| | | | | | | | | | | | | This is a driver to control the brightness of an Apple Cinema Display over USB. It updates the local brightness value if the user presses a button on the display. Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch> Cc: Oliver Neukum <oliver@neukum.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: move CONFIG_USB_DEBUG checks into the MakefileGreg Kroah-Hartman2005-11-171-1/+5
| | | | | | | | | This lets us remove a lot of code in the drivers that were all checking the same thing. It also found some bugs in a few of the drivers, which has been fixed up. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] USB: add ldusb driverMichael Hund2005-07-121-0/+1
| | | | | | | | | | | | | | | | | | | The following driver provides complete interrupt-in and interrupt-out reports (raw data) to a user program. Until now it uses the HIDIOCGDEVINFO ioctl call, because I don't know better :-(. Perhaps, it will be ok for you - and I will be happy, if you assign 8 minor numbers. I have tested it in several environments and it works very well for me. However, it has a problem with two or more devices at the same hub, if the two or more devices need 1 ms interrupt-in transfers. Unfortunately more than one interrupt-in transfer every ms isn't possible (ehci driver?). This is why the min_interrupt_in_interval and min_interrupt_out_interval are increased to 2 ms (see the corresponding module parameters). This way, I can use two devices simultaneously at the same hub. Signed-off-by: Michael Hund <mhund@ld-didactic.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-161-0/+20
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
OpenPOWER on IntegriCloud