summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/ohci-pxa27x.c
Commit message (Collapse)AuthorAgeFilesLines
* USB: don't explicitly reenable root-hub status interruptsAlan Stern2008-04-241-1/+0
| | | | | | | | | | | | | | | | | This patch (as1069b) changes the way OHCI root-hub status-change interrupts are enabled. Currently a special HCD method, hub_irq_enable(), is called when the hub driver is finished using a root hub. This approach turns out to be subject to races, resulting in unnecessary polling. The patch does away with the method entirely. Instead, the driver automatically enables the RHSC interrupt when no more status changes are present. This scheme is safe with controllers using level-triggered semantics for their interrupt flags. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: OHCI: host-controller resumes leave root hub suspendedAlan Stern2008-04-241-2/+1
| | | | | | | | | | | | | | | | | | | | | | | Drivers in the ohci-hcd family should perform certain tasks whenever their controller device is resumed. These include checking for loss of power during suspend, turning on port power, and enabling interrupt requests. Until now these jobs have been carried out when the root hub is resumed, not when the controller is. Many drivers work around the resulting awkwardness by automatically resuming their root hub whenever the controller is resumed. But this is wasteful and unnecessary. To simplify the situation, this patch (as1066) adds a new core routine, ohci_finish_controller_resume(), which can be used by all the OHCI-variant drivers. They can call the new routine instead of resuming their root hubs. And ohci-pci.c can call it instead of using its own special-purpose handler. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove dev->power.power_stateAlan Stern2008-04-241-2/+0
| | | | | | | | | | | | | | | | power.power_state is scheduled for removal. This patch (as1053) removes all uses of that field from drivers/usb. Almost all of them were write-only, the most significant exceptions being sl811-hcd.c and u132-hcd.c. Part of this patch was written by Pavel Machek. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb host: fix platform driver hotplug/coldplugKay Sievers2008-04-111-0/+3
| | | | | | | | | | | | | Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable USB HCDs, to allow re-enable auto loading. [dbrownell@users.sourceforge.net: more drivers; registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [ARM] USB: update pxa27x ohci driver to use clk supporteric miao2008-01-261-2/+11
| | | | | Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4304/1: removes the unnecessary bit number from CKENnn_XXXXEric Miao2007-04-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the unnecessary bit number from CKENnn_XXXX definitions for PXA, so that CKEN0_PWM0 --> CKEN_PWM0 CKEN1_PWM1 --> CKEN_PWM1 ... CKEN24_CAMERA --> CKEN_CAMERA The reasons for the change of these defitions are: 1. they do not scale - they are currently valid for pxa2xx, but definitely not valid for pxa3xx, e.g., pxa3xx has bit 3 for camera instead of bit 24 2. they are unnecessary - the peripheral name within the definition has already announced its usage, we don't need those bit numbers to know which peripheral we are going to enable/disable clock for 3. they are inconvenient - think about this: a driver programmer for pxa has to remember which bit in the CKEN register to turn on/off Another change in the patch is to make the definitions equal to its clock bit index, so that #define CKEN_CAMERA (24) instead of #define CKEN_CAMERA (1 << 24) this change, however, will add a run-time bit shift operation in pxa_set_cken(), but the benefit of this change is that it scales when bit index exceeds 32, e.g., pxa3xx has two registers CKENA and CKENB, totally 64 bit for this, suppose CAMERA clock enabling bit is CKENB:10, one can simply define CKEN_CAMERA to be (32 + 10) and so that pxa_set_cken() need minimum change to adapt to that. Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ohci: Rework bus glue integration to allow several at onceSylvain Munaut2007-02-071-16/+0
| | | | | | | | | | | | | | | | | The previous model had the module_init & module_exit function in the bus glue .c files themselves. That's a problem if several glues need to be selected at once and the driver is built has module. This case is quite common in embedded system where you want to handle both the integrated ohci controller and some extra controller on PCI. The ohci-hcd.c file now provide the module_init & module_exit and appropriate driver registering/unregistering is done conditionally, using #ifdefs. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ohci whitespace/comment fixupsDavid Brownell2006-12-201-5/+5
| | | | | | | | | This is an OHCI cleanup patch ... it removes a lot of erroneous whitespace (space before tab, at end of line) as well as the obsolete inline changelog. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Properly unregister reboot notifier in case of failure in ehci hcdAleksey Gorelov2006-09-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | If some problem occurs during ehci startup, for instance, request_irq fails, echi hcd driver tries it best to cleanup, but fails to unregister reboot notifier, which in turn leads to crash on reboot/poweroff. The following patch resolves this problem by not using reboot notifiers anymore, but instead making ehci/ohci driver get its own shutdown method. For PCI, it is done through pci glue, for everything else through platform driver glue. One downside: sa1111 does not use platform driver stuff, and does not have its own shutdown hook, so no 'shutdown' is called for it now. I'm not sure if it is really necessary on that platform, though. Signed-off-by: Aleks Gorelov <dared1st@yahoo.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: OHCI avoids root hub timer pollingDavid Brownell2006-09-271-0/+1
| | | | | | | | | | | | | | This teaches OHCI to use the root hub status change (RHSC) IRQ, bypassing root hub timers most of the time and switching over to the "new" root hub polling scheme. It's complicated by the fact that implementations of OHCI trigger and ack that IRQ differently (the spec is vague there). Avoiding root hub timers helps mechanisms like "dynamic tick" leave the CPU in lowpower modes for longer intervals. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] irq-flags: usb: Use the new IRQF_ constantsThomas Gleixner2006-07-021-1/+1
| | | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [ARM] 3547/1: PXA-OHCI: Allow platforms to specify a power budgetRichard Purdie2006-06-081-0/+3
| | | | | | | | | | | Patch from Richard Purdie Add a power budget variable to the PXA OHCI platform data and add a default value for the spitz platform(s) which prevents known failures with certain USB devices. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] USB: Correct ohci-pxa27x suspend/resume struct confusionRichard Purdie2006-01-041-4/+7
| | | | | | | | | The device data in ohci-pxa27x is a struct hcd, not a struct ohci_hcd. This correct the suspend/resume calls to account for this and adds some code to invalidate the platform data when the module is removed. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: Add pxa27x OHCI PM functionsRichard Purdie2006-01-041-6/+27
| | | | | | | | | | Add power management functions for the pxa27x USB OHCI host controller. This is a totally rewritten version of the patch by Nicolas Pitre and Todd Poynor which accounts for recent USB changes. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: pxa27x OHCI - Separate platform code from main driverRichard Purdie2006-01-041-42/+43
| | | | | | | | | | | | | | | | To allow multiple platforms to use the PXA27x OHCI driver, the platform code needs to be moved into the board specific files in arch/arm/mach-pxa. This patch does this for mainstone and adds preliminary hooks to allow other boards to use the driver. This has been compile tested for mainstone and successfully run on Spitz (Sharp Zaurus SL-C3000) with the addition of an appropriate board support file. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Nicolas Pitre <nico@cam.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [DRIVER MODEL] Convert platform drivers to use struct platform_driverRussell King2005-11-091-17/+14
| | | | | | | | | This allows us to eliminate the casts in the drivers, and eventually remove the use of the device_driver function pointer methods for platform device drivers. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge master.kernel.org:/home/rmk/linux-2.6-drvmodelLinus Torvalds2005-10-311-0/+2
|\ | | | | | | Manual #include fixups for clashes - there may be some unnecessary
| * Create platform_device.h to contain all the platform device details.Russell King2005-10-291-1/+1
| | | | | | | | | | | | | | | | Convert everyone who uses platform_bus_type to include linux/platform_device.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] fix missing includesTim Schmielau2005-10-301-0/+1
|/ | | | | | | | | | | | | | | | | | | | | I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] USB: Rename hcd->hub_suspend to hcd->bus_suspendAlan Stern2005-10-281-2/+2
| | | | | | | | | | | | | | | | This patch (as580) is perhaps the only result from the long discussion I had with David about his changes to the root-hub suspend/resume code. It renames the hub_suspend and hub_resume methods in struct usb_hcd to bus_suspend and bus_resume. These are more descriptive names, since the methods really do suspend or resume an entire USB bus, and less likely to be confused with the hub_suspend and hub_resume routines in hub.c. It also takes David's advice about removing the layer of bus glue, where those methods are called. And it implements a related change that David made to the other HCDs but forgot to put into dummy_hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] all HCDs provide root hub suspend/resume methodsDavid Brownell2005-10-281-0/+1
| | | | | | | | | | | | | | | | | | | | | This cleans up a small recent FIXME, ensuring that all the HCDs provide root hub suspend/resume methods. It also wraps the calls to those root suspend routines just like on the PCI "USB_SUSPEND not defined" cases, so non-PCI bus glue won't be as tempted to behave very differently. Several of the SOC based OHCI drivers forgot to list those methods; the patch also adds those missing declarations. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 42 +++++++++++++++++++++++++--------------- drivers/usb/host/ohci-au1xxx.c | 5 ++++ drivers/usb/host/ohci-lh7a404.c | 5 ++++ drivers/usb/host/ohci-pxa27x.c | 1 drivers/usb/host/ohci-s3c2410.c | 1 drivers/usb/host/ohci-sa1111.c | 1 6 files changed, 40 insertions(+), 15 deletions(-)
* [PATCH] remove some USB_SUSPEND dependenciesDavid Brownell2005-10-281-1/+1
| | | | | | | | | | | | | | | | | | | | This simplifies some of the PM-related #ifdeffing by recognizing that USB_SUSPEND depends on PM. Also, OHCI drivers were often testing for USB_SUSPEND when they should have tested just PM. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 2 ++ drivers/usb/host/ohci-hcd.c | 2 +- drivers/usb/host/ohci-hub.c | 4 ++-- drivers/usb/host/ohci-omap.c | 2 +- drivers/usb/host/ohci-pci.c | 2 +- drivers/usb/host/ohci-ppc-soc.c | 4 ++-- drivers/usb/host/ohci-pxa27x.c | 2 +- drivers/usb/host/ohci-s3c2410.c | 3 +-- drivers/usb/host/ohci-sa1111.c | 2 +- 9 files changed, 12 insertions(+), 11 deletions(-)
* [PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacksRussell King2005-10-281-2/+2
| | | | | | | | | | | | | | | | In PM v1, all devices were called at SUSPEND_DISABLE level. Then all devices were called at SUSPEND_SAVE_STATE level, and finally SUSPEND_POWER_DOWN level. However, with PM v2, to maintain compatibility for platform devices, I arranged for the PM v2 suspend/resume callbacks to call the old PM v1 suspend/resume callbacks three times with each level in order so that existing drivers continued to work. Since this is obsolete infrastructure which is no longer necessary, we can remove it. Here's an (untested) patch to do exactly that. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: OHCI, pxa27x OHCI port power tweaksDavid Brownell2005-09-121-38/+7
| | | | | | | | | | | | | | Now that it's in use on other boards, a bug in the original code needs fixing. There is no need for the PXA27x OHCI to set usb power during init, since the hub driver in usbcore handles that. Those platform-specific power control functions are also incorrect, and should therefore be removed. Add a check to clear the OTG pin hold bit until such times OTG is properly implemented. Signed-Off-By: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: OHCI relies less on NDP registerDavid Brownell2005-09-121-0/+3
| | | | | | | | | | | | | | Some OHCI implementations have differences in the way the NDP register (in roothub_a) reports the number of ports present. This patch allows the platform specific code to optionally supply the number of ports. The driver just reads the value at init (if not supplied) instead of reading it every time its needed (except for an AMD756 bug workaround). It also sets the value correctly for the ARM pxa27x architecture. Signed-Off-By: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: fix up remaining pm_message_t usagesPavel Machek2005-04-181-2/+2
| | | | | Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-161-0/+383
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
OpenPOWER on IntegriCloud