summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/ohci-at91.c
Commit message (Collapse)AuthorAgeFilesLines
* Revert "USB: OHCI: Properly handle ohci-at91 suspend"Greg Kroah-Hartman2013-10-141-8/+2
| | | | | | | | | | | | | | | | | | | This reverts commit 056ca85dab838bf064485b6cd73ddfcd9bf707e7. Manjunath is no longer at Linaro, the email address bounces. Given that, and the fact that others have reported problems with these patches, I'm reverting them until someone from Linaro who can SUPPORT THEM submits them. I will no longer accept patches from linaro.com developers unless a senior Linaro developer has signed off on them, which did not happen with this patch set. Reported-by: Olof Johansson <olof@lixom.net> Cc: Manjunath Goudar <manjunath.goudar@linaro.org> Cc: Manjunath Goudar <csmanjuvijay@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Arnd Bergmann <arnd@arndb.de>
* USB: OHCI: Properly handle ohci-at91 suspendManjunath Goudar2013-10-051-2/+8
| | | | | | | | | | | | | | | | Suspend scenario in case of ohci-at91 glue was not properly handled as it was not suspending generic part of ohci controller. Alan Stern suggested, properly handle ohci-at91 suspend scenario. Calling explicitly the ohci_suspend() routine in ohci_hcd_at91_drv_suspend() will ensure proper handling of suspend scenario. This task is sugested by Alan Stern. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Signed-off-by: Manjunath Goudar <csmanjuvijay@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: OHCI: make ohci-at91 a separate driverManjunath Goudar2013-09-261-86/+70
| | | | | | | | | | | | | Separate the TI OHCI Atmel host controller driver from ohci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Signed-off-by: Deepak Saxena <dsaxena@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: ohci-at91: remove unnecessary dev_set_drvdata()Libo Chen2013-08-271-2/+0
| | | | | | | | Unnecessary dev_set_drvdata() is removed, because the driver core clears the driver data to NULL after device_release or on probe failure. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ohci-at91: add usb_clk for transition to common clk frameworkBoris BREZILLON2013-08-021-2/+21
| | | | | | | | | | | | | | | | | | | The AT91 PMC (Power Management Controller) provides an USB clock used by USB Full Speed host (ohci) and USB Full Speed device (udc). The usb drivers (ohci and udc) must configure this clock to 48Mhz. This configuration was formely done in mach-at91/clock.c, but this implementation will be removed when moving to common clk framework. This patch adds support for usb clock retrieval and configuration, and is backward compatible with the current at91 clk implementation (if usb clk is not found, it does not configure/enable it). Changes since v1: - use IS_ENABLED(CONFIG_COMMON_CLK) to isolate new at91 clk support Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: host: use dev_get_platdata()Jingoo Han2013-07-311-6/+6
| | | | | | | | Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ohci-at91: prepare clk before calling enableBoris BREZILLON2013-06-241-6/+6
| | | | | | | | Replace clk_enable/disable with clk_prepare_enable/disable_unprepare to avoid common clk framework warnings. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: set device dma_mask without reference to global dataStephen Warren2013-05-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Many USB host drivers contain code such as: if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &tegra_ehci_dma_mask; ... where tegra_ehci_dma_mask is a global. I suspect this code originated in commit 4a53f4e "USB: ehci-tegra: add probing through device tree" and was simply copied everywhere else. This works fine when the code is built-in, but can cause a crash when the code is in a module. The first module load sets up the dma_mask pointer, but if the module is removed and re-inserted, the value is now non-NULL, and hence is not updated to point at the new location, and hence points at a stale location within the previous module load address, which in turn causes a crash if the pointer is de-referenced. The simplest way of solving this seems to be to copy the code from ehci-platform.c, which uses the coherent_dma_mask as the target for the dma_mask pointer. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-12-121-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC Header cleanups from Olof Johansson: "This is a collection of header file cleanups, mostly for OMAP and AT91, that keeps moving the platforms in the direction of multiplatform by removing the need for mach-dependent header files used in drivers and other places." Fix up mostly trivial conflicts as per Olof. * tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (106 commits) ARM: OMAP2+: Move iommu/iovmm headers to platform_data ARM: OMAP2+: Make some definitions local ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h ARM: OMAP2+: Move iopgtable header to drivers/iommu/ ARM: OMAP: Merge iommu2.h into iommu.h atmel: move ATMEL_MAX_UART to platform_data/atmel.h ARM: OMAP: Remove omap_init_consistent_dma_size() arm: at91: move at91rm9200 rtc header in drivers/rtc arm: at91: move reset controller header to arm/arm/mach-at91 arm: at91: move pit define to the driver arm: at91: move at91_shdwc.h to arch/arm/mach-at91 arm: at91: move board header to arch/arm/mach-at91 arn: at91: move at91_tc.h to arch/arm/mach-at91 arm: at91 move at91_aic.h to arch/arm/mach-at91 arm: at91 move board.h to arch/arm/mach-at91 arm: at91: move platfarm_data to include/linux/platform_data/atmel.h arm: at91: drop machine defconfig ARM: OMAP: Remove NEED_MACH_GPIO_H ARM: OMAP: Remove unnecessary mach and plat includes ...
| * arm: at91: move platfarm_data to include/linux/platform_data/atmel.hJean-Christophe PLAGNIOL-VILLARD2012-11-061-1/+1
| | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
* | usb: remove use of __devexitBill Pemberton2012-11-211-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: remove use of __devinitBill Pemberton2012-11-211-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Geoff Levand <geoff@infradead.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Olav Kongas <ok@artecdesign.ee> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: remove use of __devexit_pBill Pemberton2012-11-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: ohci: merge ohci_finish_controller_resume with ohci_resumeFlorian Fainelli2012-10-221-1/+1
|/ | | | | | | | | | | | | | Merge ohci_finish_controller_resume with ohci_resume as suggested by Alan Stern. Since ohci_finish_controller_resume no longer exists, update the various OHCI drivers to call ohci_resume() instead. Some drivers used to set themselves the bit HCD_FLAG_HW_ACCESSIBLE, which is now handled by ohci_resume(). Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irqJoachim Eastwood2012-09-271-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the following NULL pointer dereference: [ 7.740000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.810000] Unable to handle kernel NULL pointer dereference at virtual address 00000028 [ 7.810000] pgd = c3a38000 [ 7.810000] [00000028] *pgd=23a8c831, *pte=00000000, *ppte=00000000 [ 7.810000] Internal error: Oops: 17 [#1] PREEMPT ARM [ 7.810000] Modules linked in: ohci_hcd(+) regmap_i2c snd_pcm usbcore snd_page_alloc at91_cf snd_timer pcmcia_rsrc snd soundcore gpio_keys regmap_spi pcmcia_core usb_common nls_base [ 7.810000] CPU: 0 Not tainted (3.6.0-rc6-mpa+ #264) [ 7.810000] PC is at __gpio_to_irq+0x18/0x40 [ 7.810000] LR is at ohci_hcd_at91_overcurrent_irq+0x24/0xb4 [ohci_hcd] [ 7.810000] pc : [<c01392d4>] lr : [<bf08f694>] psr: 40000093 [ 7.810000] sp : c3a11c40 ip : c3a11c50 fp : c3a11c4c [ 7.810000] r10: 00000000 r9 : c02dcd6e r8 : fefff400 [ 7.810000] r7 : 00000000 r6 : c02cc928 r5 : 00000030 r4 : c02dd168 [ 7.810000] r3 : c02e7350 r2 : ffffffea r1 : c02cc928 r0 : 00000000 [ 7.810000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 7.810000] Control: c000717f Table: 23a38000 DAC: 00000015 [ 7.810000] Process modprobe (pid: 285, stack limit = 0xc3a10270) [ 7.810000] Stack: (0xc3a11c40 to 0xc3a12000) [ 7.810000] 1c40: c3a11c6c c3a11c50 bf08f694 c01392cc c3a11c84 c2c38b00 c3806900 00000030 [ 7.810000] 1c60: c3a11ca4 c3a11c70 c0051264 bf08f680 c3a11cac c3a11c80 c003e764 c3806900 [ 7.810000] 1c80: c2c38b00 c02cb05c c02cb000 fefff400 c3806930 c3a11cf4 c3a11cbc c3a11ca8 [ 7.810000] 1ca0: c005142c c005123c c3806900 c3805a00 c3a11cd4 c3a11cc0 c0053f24 c00513e4 [ 7.810000] 1cc0: c3a11cf4 00000030 c3a11cec c3a11cd8 c005120c c0053e88 00000000 00000000 [ 7.810000] 1ce0: c3a11d1c c3a11cf0 c00124d0 c00511e0 01400000 00000001 00000012 00000000 [ 7.810000] 1d00: ffffffff c3a11d94 00000030 00000000 c3a11d34 c3a11d20 c005120c c0012438 [ 7.810000] 1d20: c001dac4 00000012 c3a11d4c c3a11d38 c0009b08 c00511e0 c00523fc 60000013 [ 7.810000] 1d40: c3a11d5c c3a11d50 c0008510 c0009ab4 c3a11ddc c3a11d60 c0008eb4 c00084f0 [ 7.810000] 1d60: 00000000 00000030 00000000 00000080 60000013 bf08f670 c3806900 c2c38b00 [ 7.810000] 1d80: 00000030 c3806930 00000000 c3a11ddc c3a11d88 c3a11da8 c0054190 c00523fc [ 7.810000] 1da0: 60000013 ffffffff c3a11dec c3a11db8 00000000 c2c38b00 bf08f670 c3806900 [ 7.810000] 1dc0: 00000000 00000080 c02cc928 00000030 c3a11e0c c3a11de0 c0052764 c00520d8 [ 7.810000] 1de0: c3a11dfc 00000000 00000000 00000002 bf090f61 00000004 c02cc930 c02cc928 [ 7.810000] 1e00: c3a11e4c c3a11e10 bf090978 c005269c bf090f61 c02cc928 bf093000 c02dd170 [ 7.810000] 1e20: c3a11e3c c02cc930 c02cc930 bf0911d0 bf0911d0 bf093000 c3a10000 00000000 [ 7.810000] 1e40: c3a11e5c c3a11e50 c0155b7c bf090808 c3a11e7c c3a11e60 c0154690 c0155b6c [ 7.810000] 1e60: c02cc930 c02cc964 bf0911d0 c3a11ea0 c3a11e9c c3a11e80 c015484c c01545e8 [ 7.810000] 1e80: 00000000 00000000 c01547e4 bf0911d0 c3a11ec4 c3a11ea0 c0152e58 c01547f4 [ 7.810000] 1ea0: c381b88c c384ab10 c2c10540 bf0911d0 00000000 c02d7518 c3a11ed4 c3a11ec8 [ 7.810000] 1ec0: c01544c0 c0152e0c c3a11efc c3a11ed8 c01536cc c01544b0 bf091075 c3a11ee8 [ 7.810000] 1ee0: bf049af0 bf09120c bf0911d0 00000000 c3a11f1c c3a11f00 c0154e9c c0153628 [ 7.810000] 1f00: bf049af0 bf09120c 000ae190 00000000 c3a11f2c c3a11f20 c0155f58 c0154e04 [ 7.810000] 1f20: c3a11f44 c3a11f30 bf093054 c0155f1c 00000000 00006a4f c3a11f7c c3a11f48 [ 7.810000] 1f40: c0008638 bf093010 bf09120c 000ae190 00000000 c00093c4 00006a4f bf09120c [ 7.810000] 1f60: 000ae190 00000000 c00093c4 00000000 c3a11fa4 c3a11f80 c004fdc4 c000859c [ 7.810000] 1f80: c3a11fa4 000ae190 00006a4f 00016eb8 000ad018 00000080 00000000 c3a11fa8 [ 7.810000] 1fa0: c0009260 c004fd58 00006a4f 00016eb8 000ae190 00006a4f 000ae100 00000000 [ 7.810000] 1fc0: 00006a4f 00016eb8 000ad018 00000080 000adba0 000ad208 00000000 000ad3d8 [ 7.810000] 1fe0: beaf7ae8 beaf7ad8 000172b8 b6e4e940 20000010 000ae190 00000000 00000000 [ 7.810000] Backtrace: [ 7.810000] [<c01392bc>] (__gpio_to_irq+0x0/0x40) from [<bf08f694>] (ohci_hcd_at91_overcurrent_irq+0x24/0xb4 [ohci_hcd]) [ 7.810000] [<bf08f670>] (ohci_hcd_at91_overcurrent_irq+0x0/0xb4 [ohci_hcd]) from [<c0051264>] (handle_irq_event_percpu+0x38/0x1a8) [ 7.810000] r6:00000030 r5:c3806900 r4:c2c38b00 [ 7.810000] [<c005122c>] (handle_irq_event_percpu+0x0/0x1a8) from [<c005142c>] (handle_irq_event+0x58/0x7c) [ 7.810000] [<c00513d4>] (handle_irq_event+0x0/0x7c) from [<c0053f24>] (handle_simple_irq+0xac/0xd8) [ 7.810000] r5:c3805a00 r4:c3806900 [ 7.810000] [<c0053e78>] (handle_simple_irq+0x0/0xd8) from [<c005120c>] (generic_handle_irq+0x3c/0x48) [ 7.810000] r4:00000030 [ 7.810000] [<c00511d0>] (generic_handle_irq+0x0/0x48) from [<c00124d0>] (gpio_irq_handler+0xa8/0xfc) [ 7.810000] r4:00000000 [ 7.810000] [<c0012428>] (gpio_irq_handler+0x0/0xfc) from [<c005120c>] (generic_handle_irq+0x3c/0x48) [ 7.810000] [<c00511d0>] (generic_handle_irq+0x0/0x48) from [<c0009b08>] (handle_IRQ+0x64/0x88) [ 7.810000] r4:00000012 [ 7.810000] [<c0009aa4>] (handle_IRQ+0x0/0x88) from [<c0008510>] (at91_aic_handle_irq+0x30/0x38) [ 7.810000] r5:60000013 r4:c00523fc [ 7.810000] [<c00084e0>] (at91_aic_handle_irq+0x0/0x38) from [<c0008eb4>] (__irq_svc+0x34/0x60) [ 7.810000] Exception stack(0xc3a11d60 to 0xc3a11da8) [ 7.810000] 1d60: 00000000 00000030 00000000 00000080 60000013 bf08f670 c3806900 c2c38b00 [ 7.810000] 1d80: 00000030 c3806930 00000000 c3a11ddc c3a11d88 c3a11da8 c0054190 c00523fc [ 7.810000] 1da0: 60000013 ffffffff [ 7.810000] [<c00520c8>] (__setup_irq+0x0/0x458) from [<c0052764>] (request_threaded_irq+0xd8/0x134) [ 7.810000] [<c005268c>] (request_threaded_irq+0x0/0x134) from [<bf090978>] (ohci_hcd_at91_drv_probe+0x180/0x41c [ohci_hcd]) [ 7.810000] [<bf0907f8>] (ohci_hcd_at91_drv_probe+0x0/0x41c [ohci_hcd]) from [<c0155b7c>] (platform_drv_probe+0x20/0x24) [ 7.810000] [<c0155b5c>] (platform_drv_probe+0x0/0x24) from [<c0154690>] (driver_probe_device+0xb8/0x20c) [ 7.810000] [<c01545d8>] (driver_probe_device+0x0/0x20c) from [<c015484c>] (__driver_attach+0x68/0x88) [ 7.810000] r7:c3a11ea0 r6:bf0911d0 r5:c02cc964 r4:c02cc930 [ 7.810000] [<c01547e4>] (__driver_attach+0x0/0x88) from [<c0152e58>] (bus_for_each_dev+0x5c/0x9c) [ 7.810000] r6:bf0911d0 r5:c01547e4 r4:00000000 [ 7.810000] [<c0152dfc>] (bus_for_each_dev+0x0/0x9c) from [<c01544c0>] (driver_attach+0x20/0x28) [ 7.810000] r7:c02d7518 r6:00000000 r5:bf0911d0 r4:c2c10540 [ 7.810000] [<c01544a0>] (driver_attach+0x0/0x28) from [<c01536cc>] (bus_add_driver+0xb4/0x22c) [ 7.810000] [<c0153618>] (bus_add_driver+0x0/0x22c) from [<c0154e9c>] (driver_register+0xa8/0x144) [ 7.810000] r7:00000000 r6:bf0911d0 r5:bf09120c r4:bf049af0 [ 7.810000] [<c0154df4>] (driver_register+0x0/0x144) from [<c0155f58>] (platform_driver_register+0x4c/0x60) [ 7.810000] r7:00000000 r6:000ae190 r5:bf09120c r4:bf049af0 [ 7.810000] [<c0155f0c>] (platform_driver_register+0x0/0x60) from [<bf093054>] (ohci_hcd_mod_init+0x54/0x8c [ohci_hcd]) [ 7.810000] [<bf093000>] (ohci_hcd_mod_init+0x0/0x8c [ohci_hcd]) from [<c0008638>] (do_one_initcall+0xac/0x174) [ 7.810000] r4:00006a4f [ 7.810000] [<c000858c>] (do_one_initcall+0x0/0x174) from [<c004fdc4>] (sys_init_module+0x7c/0x1a0) [ 7.810000] [<c004fd48>] (sys_init_module+0x0/0x1a0) from [<c0009260>] (ret_fast_syscall+0x0/0x2c) [ 7.810000] r7:00000080 r6:000ad018 r5:00016eb8 r4:00006a4f [ 7.810000] Code: e24cb004 e59f3028 e1a02000 e7930180 (e5903028) [ 7.810000] ---[ end trace 85aa37ed128143b5 ]--- [ 7.810000] Kernel panic - not syncing: Fatal exception in interrupt Commit 6fffb77c (USB: ohci-at91: fix PIO handling in relation with number of ports) started setting unused pins to EINVAL. But this exposed a bug in the ohci_hcd_at91_overcurrent_irq function where the gpio was used without being checked to see if it is valid. This patches fixed the issue by adding the gpio valid check. Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Cc: stable <stable@vger.kernel.org> # [3.4+] whereever 6fffb77c went Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ohci-at91: fix PIO handling in relation with number of portsNicolas Ferre2012-09-051-0/+10
| | | | | | | | | | | | | | | | If the number of ports present on the SoC/board is not the maximum and that the platform data is not filled with all data, there is an easy way to mess the PIO setup for this interface. This quick fix addresses mis-configuration in USB host platform data that is common in at91 boards since commit 0ee6d1e (USB: ohci-at91: change maximum number of ports) that did not modified the associatd board files. Reported-by: Klaus Falkner <klaus.falkner@solectrix.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Stable <stable@vger.kernel.org> [3.4+] Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ohci-at91: add a reset function to fix race conditionNicolas Ferre2012-05-091-1/+10
| | | | | | | | | | | | | | | A possible race condition appears because we are not initializing the ohci->regs before calling usb_hcd_request_irqs(). We move the call to ohci_init() in hcd->driver->reset() instead of hcd->driver->start() to fix this. This was experienced when we share the same IRQ line between OHCI and EHCI controllers. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Christian Eggers <christian.eggers@kathrein.de> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ohci-at91: use resource_size() for memory/io resource lengthNicolas Ferre2012-05-091-1/+1
| | | | | Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ohci-at91.c: remove err() usageGreg Kroah-Hartman2012-04-271-1/+2
| | | | | | | | | | | err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Alan Stern <stern@rowland.harvard.edu> CC: Grant Likely <grant.likely@secretlab.ca> CC: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ohci-at91: change annotations for probe/remove functionsNicolas Ferre2012-04-171-6/+6
| | | | | | | | | Add __devinit and __devexit on *_probe() and *_remove() functions with proper modification of struct platform_driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: linux-usb@vger.kernel.org
* USB: ohci-at91: trivial return code name changeNicolas Ferre2012-04-041-4/+3
| | | | | | Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Alan Stern <stern@rowland.harvard.edu>
* USB: ohci-at91: change maximum number of portsNicolas Ferre2012-04-041-30/+36
| | | | | | | | | | | | | Change number of ports to 3 for newer SoCs. Modify pdata structure and ohci-at91 code that was dealing with ports information and check of port indexes. Several coding style errors have been addresses as the patch was touching affected lines of code and was producing errors while run through checkpatch.pl. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Alan Stern <stern@rowland.harvard.edu>
* USB: ohci-at91: rework and fix initializationNicolas Ferre2012-04-041-42/+46
| | | | | | | | | | | | The DT information are filled in a pdata structure and then passed on to the usual check code of the probe function. Thus we do not need to redo the gpio checking and irq configuration in the DT-related code. On the other hand, we setup GPIO direction in driver for vbus and overcurrent. It will be useful when moving to pinctrl subsystem. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Alan Stern <stern@rowland.harvard.edu>
* USB: ohci-at91: fix vbus_pin_active_low handlingNicolas Ferre2012-04-041-2/+2
| | | | | | | | | | The information is not properly taken into account for {get|set}_power() functions. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> [3.2+]
* ARM: at91: usb ohci add dt supportJean-Christophe PLAGNIOL-VILLARD2012-03-161-1/+100
| | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ARM/USB: at91/ohci-at91: remove the use of irq_to_gpioNicolas Ferre2012-03-011-2/+3
| | | | | | | | | | | | irq_to_gpio() macro will be removed from AT91 GPIO interrupt controller. So we replace it with the use of gpio_to_irq() and a reworked test. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: linux-usb@vger.kernel.org
* ARM/USB: at91/ohci-at91: rename vbus_pin_inverted to vbus_pin_active_lowJean-Christophe PLAGNIOL-VILLARD2012-01-201-2/+4
| | | | | | | | | | Allows to configure independently the vbus_pin associated with each port. Matches usual naming scheme. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: linux-usb@vger.kernel.org
* USB: at91: fix clk_get error handlingJean-Christophe PLAGNIOL-VILLARD2012-01-201-0/+18
| | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: linux-usb@vger.kernel.org
* ARM: at91/ohci: use gpio_is_valid to check the gpioJean-Christophe PLAGNIOL-VILLARD2011-11-291-6/+6
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* USB: at91: at91-ohci: fix set/get powerJean-Christophe PLAGNIOL-VILLARD2011-11-141-0/+6
| | | | | | | | | | in commit aa6e52a35 we introduce the support of overcurrent notification but the set and get of the power without checking if the gpio is valid or not Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* at91: at91-ohci: support overcurrent notificationThomas Petazzoni2011-09-101-9/+215
| | | | | | | | | | | | | | | | | | | Several USB power switches (AIC1526 or MIC2026) have a digital output that is used to notify that an overcurrent situation is taking place. This digital outputs are typically connected to GPIO inputs of the processor and can be used to be notified of those overcurrent situations. Therefore, we add a new overcurrent_pin[] array in the at91_usbh_data structure so that boards can tell the AT91 OHCI driver which pins are used for the overcurrent notification, and an overcurrent_supported boolean to tell the driver whether overcurrent is supported or not. The code has been largely borrowed from ohci-da8xx.c and ohci-s3c2410.c. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* at91: ohci-at91: add vbus_pin_inverted platform attributeThomas Petazzoni2011-09-101-2/+2
| | | | | | | | | | | | | | The existing OHCI AT91 driver made the assumption that the enable input of the USB power switch was active low. However, some USB power switches such as the Micrel MIC2026-1 [1] have an active high input to enable the power. A new vbus_pin_inverted attribute is added to the at91_usbh_data structure so that board files can tell the OHCI driver if the vbus pin logic is active low or active high. [1] http://www.micrel.com/page.do?page=product-info/products/mic2026.shtml Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* at91: ohci-at91: always provide all the clocksJean-Christophe PLAGNIOL-VILLARD2011-09-101-10/+5
| | | | | | | | Remove the cpu_is_at91xxxx() macros in the ohci-at91 driver. SoCs at91sam9261 and at91sam9g10 expect one additional clock: hck0. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* USB: ohci-at91: fix power management hangingPatrice Vilchez2010-04-301-0/+2
| | | | | | | | | | | | | A hanging has been detected in ohci-at91 while going in suspend to ram. This is due to asynchronous operations between ohci reset and ohci clocks shutdown. This patch adds the reading of the control register between the reset of the ohci and clocks stop. This "flush the writes" idea was taken from ohci-hcd.c file (ohci_shutdown() function). Signed-off-by: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: modifications for at91sam9g10Hong Xu2009-12-111-5/+5
| | | | | | | | | Modify both host and gadget USB drivers for at91sam9g10. This add a clock management equivalent to at91sam9261 on usb drivers. It also add the way of handling gadget pull-ups (like the at91sam9261). Signed-off-by: Hong Xu <hong.xu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* USB: at91: modify OHCI driver to allow shared interruptsNicolas Ferre2009-09-231-1/+1
| | | | | | | | | | | | | At91sam9g45 series has a set of high speed USB interfaces. The host driver is an EHCI with its companion OHCI. OHCI is always handled by ohci-at91.c. This wrapper is just modified to allow IRQ sharing between two controllers. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [ARM] 5446/1: ohci-at91: Limit vbus_pin assignment to the size of the arrayJustin Waters2009-04-081-2/+2
| | | | | | | | | | Currently, the vbus_pin assignment loop is limited by the value of the "ports" variable in the platform data. Now that the vbus_pin array is no longer flexible, we can use its actual size. Signed-off-by: Justin Waters <justin.waters@timesys.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* USB: automatically enable RHSC interruptsAlan Stern2008-08-211-1/+0
| | | | | | | | | | | | | | | | | This patch (as1069c) changes the way OHCI root-hub status-change interrupts are enabled. Currently a special HCD method, hub_irq_enable(), is called when the hub driver is finished using a root hub. This approach turns out to be subject to races, resulting in unnecessary polling. The patch does away with the method entirely. Instead, the driver automatically enables the RHSC interrupt when no more status changes are present. This scheme is safe with controllers using level-triggered semantics for their interrupt flags. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King2008-08-071-3/+3
| | | | | | This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Remove asm/hardware.h, use asm/arch/hardware.h insteadRussell King2008-08-071-1/+1
| | | | | | | | | Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Eliminate useless includes of asm/mach-types.hRussell King2008-08-071-1/+0
| | | | | | | | There are 43 includes of asm/mach-types.h by files that don't reference anything from that file. Remove these unnecessary includes. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* USB: missing usb_put_hcd to ohci-at91Pete Zaitcev2008-07-211-4/+5
| | | | | | | | | | Looks like usb_put_hcd was missing. Also, make an always-zero function return void. Signed-off-by: Pete Zaitcev <zaitcev@yahoo.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Revert "USB: don't explicitly reenable root-hub status interrupts"Linus Torvalds2008-07-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | This reverts commit e872154921a6b5256a3c412dd69158ac0b135176. Andrey Borzenkov reports that it resulted in a totally hung machine for him when loading the OHCI driver. Extensive netconsole capture with SysRq output shows that modprobe gets stuck in ohci_hub_status_data() when probing and enabling the OHCI controller, see for example http://lkml.org/lkml/2008/7/5/236 for an analysis. The problem appears to be an interrupt flood triggered by the commit that gets reverted, and Andrey confirmed that the revert makes things work for him again. Reported-and-tested-by: Andrey Borzenkov <arvidjaar@mail.ru> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: don't explicitly reenable root-hub status interruptsAlan Stern2008-04-241-1/+0
| | | | | | | | | | | | | | | | | This patch (as1069b) changes the way OHCI root-hub status-change interrupts are enabled. Currently a special HCD method, hub_irq_enable(), is called when the hub driver is finished using a root hub. This approach turns out to be subject to races, resulting in unnecessary polling. The patch does away with the method entirely. Instead, the driver automatically enables the RHSC interrupt when no more status changes are present. This scheme is safe with controllers using level-triggered semantics for their interrupt flags. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: OHCI: host-controller resumes leave root hub suspendedAlan Stern2008-04-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | Drivers in the ohci-hcd family should perform certain tasks whenever their controller device is resumed. These include checking for loss of power during suspend, turning on port power, and enabling interrupt requests. Until now these jobs have been carried out when the root hub is resumed, not when the controller is. Many drivers work around the resulting awkwardness by automatically resuming their root hub whenever the controller is resumed. But this is wasteful and unnecessary. To simplify the situation, this patch (as1066) adds a new core routine, ohci_finish_controller_resume(), which can be used by all the OHCI-variant drivers. They can call the new routine instead of resuming their root hubs. And ohci-pci.c can call it instead of using its own special-purpose handler. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb host: fix platform driver hotplug/coldplugKay Sievers2008-04-111-2/+1
| | | | | | | | | | | | | Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable USB HCDs, to allow re-enable auto loading. [dbrownell@users.sourceforge.net: more drivers; registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: ohci-at91 uses generic GPIO callsDavid Brownell2008-02-011-0/+31
| | | | | | | | | | | | | | Update the ohci-at91 bus glue to start understanding about the per-port power switch GPIOs it's given (on the sam9263-ek and potentially other boards). For the moment this just claims them and forces them active (assuming active-low power enables) whenever the HCD is loaded. The assumption is still that board setup configures the GPIOs. Using gpio_request() tracks actual usage and guards against conflict. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: at91-ohci, handle extra at91sam9261 ahb clockAndrew Victor2007-02-161-17/+33
| | | | | | | | | | | | The AT91SAM9261 needs to activate an AHB clock (HCK0) to use the USB Host controller. Previously clock.c would just enable it at startup, but now all the unused clocks are automatically disabled. Based on patch from Nicolas Ferre. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ohci-at91 refcount fix for irq wake enablesMarc Pignat2007-02-071-3/+5
| | | | | | | | | | | | | | | | | | The attached patch fixes the unbalanced calls to enable_irq_wake() and disable_irq_wake() in the AT91 USB Host driver. It should resolve these kernel messages: Unbalanced IRQ x wake disable BUG: warning at kernel/irq/manage.c:167/set_irq_wake() (The original code was debugged before a bug in the genirq wakeup irq logic was fixed by adding the IRQ wake enable/disable refcounting. Not all code yet uses the bugfixed model.) Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ohci: Rework bus glue integration to allow several at onceSylvain Munaut2007-02-071-15/+0
| | | | | | | | | | | | | | | | | The previous model had the module_init & module_exit function in the bus glue .c files themselves. That's a problem if several glues need to be selected at once and the driver is built has module. This case is quite common in embedded system where you want to handle both the integrated ohci controller and some extra controller on PCI. The ohci-hcd.c file now provide the module_init & module_exit and appropriate driver registering/unregistering is done conditionally, using #ifdefs. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud