summaryrefslogtreecommitdiffstats
path: root/drivers/usb/chipidea/core.c
Commit message (Collapse)AuthorAgeFilesLines
...
* | usb: chipidea: ehci_init_driver is intended to call one timePeter Chen2015-07-221-1/+12
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ehci_init_driver is used to initialize hcd APIs for each ehci controller driver, it is designed to be called only one time and before driver register is called. The current design will cause ehci_init_driver is called multiple times at probe process, it will cause hc_driver's initialization affect current running hcd. We run out NULL pointer dereference problem when one hcd is started by module_init, and the other is started by otg thread at SMP platform. The reason for this problem is ehci_init_driver will do memory copy for current uniform hc_driver, and this memory copy will do memset (as 0) first, so when the first hcd is running usb_add_hcd, and the second hcd may clear the uniform hc_driver's space (at ehci_init_driver), then the first hcd will meet NULL pointer at the same time. See below two logs: LOG_1: ci_hdrc ci_hdrc.0: EHCI Host Controller ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 ci_hdrc ci_hdrc.1: doesn't support gadget Unable to handle kernel NULL pointer dereference at virtual address 00000014 pgd = 80004000 [00000014] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 108 Comm: kworker/u8:2 Not tainted 3.14.38-222193-g24b2734-dirty #25 Workqueue: ci_otg ci_otg_work task: d839ec00 ti: d8400000 task.ti: d8400000 PC is at ehci_run+0x4c/0x284 LR is at _raw_spin_unlock_irqrestore+0x28/0x54 pc : [<8041f9a0>] lr : [<8070ea84>] psr: 60000113 sp : d8401e30 ip : 00000000 fp : d8004400 r10: 00000001 r9 : 00000001 r8 : 00000000 r7 : 00000000 r6 : d8419940 r5 : 80dd24c0 r4 : d8419800 r3 : 8001d060 r2 : 00000000 r1 : 00000001 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 1000404a DAC: 00000015 Process kworker/u8:2 (pid: 108, stack limit = 0xd8400238) Stack: (0xd8401e30 to 0xd8402000) 1e20: d87523c0 d8401e48 66667562 d8419800 1e40: 00000000 00000000 d8419800 00000000 00000000 00000000 d84198b0 8040fcdc 1e60: 00000000 80dd320c d8477610 d8419c00 d803d010 d8419800 00000000 00000000 1e80: d8004400 00000000 d8400008 80431494 80431374 d803d100 d803d010 d803d1ac 1ea0: 00000000 80432428 804323d4 d803d100 00000001 80435eb8 80e0d0bc d803d100 1ec0: 00000006 80436458 00000000 d803d100 80e92ec8 80436f44 d803d010 d803d100 1ee0: d83fde00 8043292c d8752710 d803d1f4 d803d010 8042ddfc 8042ddb8 d83f3b00 1f00: d803d1f4 80042b60 00000000 00000003 00000001 00000001 80054598 d83f3b00 1f20: d8004400 d83f3b18 d8004414 d8400000 80e3957b 00000089 d8004400 80043814 1f40: d839ec00 00000000 d83fcd80 d83f3b00 800436e4 00000000 00000000 00000000 1f60: 00000000 80048f34 00000000 00000000 00000000 d83f3b00 00000000 00000000 1f80: d8401f80 d8401f80 00000000 00000000 d8401f90 d8401f90 d8401fac d83fcd80 1fa0: 80048e68 00000000 00000000 8000e538 00000000 00000000 00000000 00000000 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<8041f9a0>] (ehci_run) from [<8040fcdc>] (usb_add_hcd+0x248/0x6e8) [<8040fcdc>] (usb_add_hcd) from [<80431494>] (host_start+0x120/0x2e4) [<80431494>] (host_start) from [<80432428>] (ci_otg_start_host+0x54/0xbc) [<80432428>] (ci_otg_start_host) from [<80435eb8>] (otg_set_protocol+0xa4/0xd0) [<80435eb8>] (otg_set_protocol) from [<80436458>] (otg_set_state+0x574/0xc58) [<80436458>] (otg_set_state) from [<80436f44>] (otg_statemachine+0x408/0x46c) [<80436f44>] (otg_statemachine) from [<8043292c>] (ci_otg_fsm_work+0x3c/0x190) [<8043292c>] (ci_otg_fsm_work) from [<8042ddfc>] (ci_otg_work+0x44/0x1c4) [<8042ddfc>] (ci_otg_work) from [<80042b60>] (process_one_work+0xf4/0x35c) [<80042b60>] (process_one_work) from [<80043814>] (worker_thread+0x130/0x3bc) [<80043814>] (worker_thread) from [<80048f34>] (kthread+0xcc/0xe4) [<80048f34>] (kthread) from [<8000e538>] (ret_from_fork+0x14/0x3c) Code: e5953018 e3530000 0a000000 e12fff33 (e5878014) LOG_2: ci_hdrc ci_hdrc.0: EHCI Host Controller ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 ci_hdrc ci_hdrc.1: doesn't support gadget Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = 80004000 [00000000] *pgd=00000000 In Online 00:00ternal e Offline rror: Oops: 80000005 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 108 Comm: kworker/u8:2 Not tainted 3.14.38-02007-g24b2734-dirty #127 Workque Online 00:00ue: ci_o Offline tg ci_otg_work Online 00:00task: d8 Offline 39ec00 ti: d83ea000 task.ti: d83ea000 PC is at 0x0 LR is at usb_add_hcd+0x248/0x6e8 pc : [<00000000>] lr : [<8040f644>] psr: 60000113 sp : d83ebe60 ip : 00000000 fp : d8004400 r10: 00000001 r9 : 00000001 r8 : d85fd4b0 r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : d85fd400 r3 : 00000000 r2 : d85fd4f4 r1 : 80410178 r0 : d85fd400 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 1000404a DAC: 00000015 Process kworker/u8:2 (pid: 108, stack limit = 0xd83ea238) Stack: (0xd83ebe60 to 0xd83ec000) be60: 00000000 80dd920c d8654e10 d85fd800 d803e010 d85fd400 00000000 00000000 be80: d8004400 00000000 d83ea008 80430e34 80430d14 d803e100 d803e010 d803e1ac bea0: 00000000 80431dc8 80431d74 d803e100 00000001 80435858 80e130bc d803e100 bec0: 00000006 80435df8 00000000 d803e100 80e98ec8 804368e4 d803e010 d803e100 bee0: d86e8100 804322cc d86cf050 d803e1f4 d803e010 8042d79c 8042d758 d83cf900 bf00: d803e1f4 80042b78 00000000 00000003 00000001 00000001 800545e8 d83cf900 bf20: d8004400 d83cf918 d8004414 d83ea000 80e3f57b 00000089 d8004400 8004382c bf40: d839ec00 00000000 d8393780 d83cf900 800436fc 00000000 00000000 00000000 bf60: 00000000 80048f50 80e019f4 00000000 0000264c d83cf900 00000000 00000000 bf80: d83ebf80 d83ebf80 00000000 00000000 d83ebf90 d83ebf90 d83ebfac d8393780 bfa0: 80048e84 00000000 00000000 8000e538 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ee66e85d 133ebd03 [<804 Online 00:000f644>] Offline (usb_add_hcd) from [<80430e34>] (host_start+0x120/0x2e4) [<80430e34>] (host_start) from [<80431dc8>] (ci_otg_start_host+0x54/0xbc) [<80431dc8>] (ci_otg_start_host) from [<80435858>] (otg_set_protocol+0xa4/0xd0) [<80435858>] (otg_set_protocol) from [<80435df8>] (otg_set_state+0x574/0xc58) [<80435df8>] (otg_set_state) from [<804368e4>] (otg_statemachine+0x408/0x46c) [<804368e4>] (otg_statemachine) from [<804322cc>] (ci_otg_fsm_work+0x3c/0x190) [<804322cc>] (ci_otg_fsm_work) from [<8042d79c>] (ci_otg_work+0x44/0x1c4) [<8042d79c>] (ci_otg_work) from [<80042b78>] (process_one_work+0xf4/0x35c) [<80042b78>] (process_one_work) from [<8004382c>] (worker_thread+0x130/0x3bc) [<8004382c>] (worker_thread) from [<80048f50>] (kthread+0xcc/0xe4) [<80048f50>] (kthread) from [<8000e538>] (ret_from_fork+0x14/0x3c) Code: bad PC value Cc: Jun Li <jun.li@freescale.com> Cc: <stable@vger.kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Peter Chen <peter.chen@freescale.com>
* usb: chipidea: support runtime power management for otg fsm modeLi Jun2015-03-181-4/+39
| | | | | | | | | | | This patch adds runtime power management support for otg fsm mode, since A-device in a_idle state cannot detect data pulse irq after suspended, here enable wakeup by connection before suspend to make it can be resumed by DP; and handle wakeup from that state like SRP. Signed-off-by: Li Jun <jun.li@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: add chipidea revision informationPeter Chen2015-03-181-2/+21
| | | | | | | | | | | | Define ci_get_revision API to know the controller revision information according to chipidea 1.1a, 2.0a and 2.5a spec. Besides, add one entry at struct ci_hdrc to indicate revision information, it can be used for adding different code for revisions, eg kinds of errata. Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: clear otg interrupt status for otg capable controllerPeter Chen2015-03-181-4/+5
| | | | | | | | | We need to do it for all otg capable controller, not only peripheral featured otg capable controller, otherwise, the host-only role, but otg capable controller may be responded by otg interrupt. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: add usb as system wakeup sourcePeter Chen2015-03-181-0/+10
| | | | | | | | | | The USB signal can be system wakeup source, this patch add the support, for how to enable it, see Documentation/usb/chipidea.txt. Since USB wakeup enable logic is vendor/platform specific, the glue layer needs to implement it to support this feature. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: add runtime power management supportPeter Chen2015-03-181-6/+94
| | | | | | | Add runtime power management support. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "usb: chipidea: remove duplicate dev_set_drvdata for host_start"Peter Chen2015-01-091-1/+1
| | | | | | | | | | | | | | | | This reverts commit 14b4099c074f2ddf4d84b22d370170e61b527529 It moved platform_set_drvdata(pdev, ci) before hcd is created, and the hcd will assign itself as ci controller's drvdata during the hcd creation function (in usb_create_shared_hcd), so it overwrites the real ci's drvdata which we want to use. So, if the controller is at host mode, the system suspend API will get the wrong struct ci_hdrc pointer, and cause the oops. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds2014-12-141-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
| * Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman2014-11-031-1/+0
| |\ | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
| | * usb: chipidea: drop owner assignment from platform_driversWolfram Sang2014-10-201-1/+0
| | | | | | | | | | | | | | | | | | | | | A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | | usb: chipidea: Fixed a few typos in commentsMickael Maison2014-11-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Fixed typos in comments of 2 drivers/usb/chipidea files Signed-off-by: Mickael Maison <mickael.maison@gmail.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | usb: chipidea: fix phy handlingAntoine Tenart2014-11-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The generic plaftorm device for ChipIdea drivers is probed by calling ci_hdrc_probe. The device structure used is not the one of the specific ChipIdea driver but the one of the generic ChipIdea platform device. This results in not being able to probe the PHYs as we're not using the right device structure. Since all ChipIdea drivers are retrieving their PHYs in their specific driver code, this didn't impact any of them yet. Fixes it using the right device structure (dev->parent). Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | usb: chipidea: remove duplicate dev_set_drvdata for host_startPeter Chen2014-11-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The core driver has already done it, besides, move set driver data operation just after ci has allocated successfully in case some code (like ci_role_start) want to access this driver data. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | usb: chipidea: parameter 'mode' isn't needed for hw_device_resetPeter Chen2014-11-261-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | The hw_device_reset is dedicated to be used at device mode initializaiton, so delete the parameter 'mode'. For host driver, the ehci driver will handle all things. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | usb: chipidea: add controller reset APIPeter Chen2014-11-261-4/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add controller reset API, currently it is used for device mode only. It may be used for host/otg driver in future. Ususally, we need this API for dual-role switch and back from hibernation suspend to let the controller at default state. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | usb: chipidea: add system power management supportPeter Chen2014-11-261-0/+48
| | | | | | | | | | | | | | | | | | | | | Add system power management support Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | usb: chipidea: add hw_wait_phy_stable for getting stable statusPeter Chen2014-11-261-8/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The phy needs some delay to output the stable status from low power mode. And for OTGSC, the status inputs are debounced using a 1 ms time constant, so, delay 2ms for controller to get the stable status(like vbus and id) when the phy leaves low power. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | usb: chipidea: remove the unnecessary delay after clear portsc.phcdPeter Chen2014-11-261-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | The individual PHY driver should take this responsibility if it needs to delay between clear portsc.phcd and let the phy leave low power mode. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | usb: chipidea: core: Remove unneeded OOM messageFabio Estevam2014-11-261-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | MM core code already complains when devm_kzalloc() fails, so no need to print the error locally. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | usb: chipidea: using devm_request_irq to instead of request_irqPeter Chen2014-11-261-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | Using devm_request_irq to instead of request_irq. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | usb: chipidea: add support to the generic PHY frameworkAntoine Tenart2014-11-031-18/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support of the PHY framework for ChipIdea drivers. Changes are done in both the ChipIdea common code and in the drivers accessing the PHY. This is done by adding a new PHY member in ChipIdea's structures and by taking care of it in the code. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | | usb: allow to supply the PHY in the drivers when using HCDAntoine Tenart2014-11-031-10/+10
|/ / | | | | | | | | | | | | | | | | | | | | | | This patch modify the generic code handling PHYs to allow them to be supplied from the drivers. This adds checks to ensure no PHY was already there when looking for one in the generic code. This also makes sure we do not modify its state in the generic HCD functions, it was provided by the driver. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com>
* / usb: chipidea: Fix oops when removing the ci_hdrc moduleTorsten Fleischer2014-10-271-1/+0
|/ | | | | | | | | | | | | The call of 'kfree(ci->hw_bank.regmap)' in ci_hdrc_remove() sometimes causes a kernel oops when removing the ci_hdrc module. Since there is no separate memory allocated for the ci->hw_bank.regmap array, there is no need to free it. Cc: v3.14+ <stable@@vger.kernel.org> Signed-off-by: Torsten Fleischer <to-fleischer@t-online.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: enhance kernel-doc formatPeter Chen2014-09-231-1/+7
| | | | | | | Some kernel-doc style comment are not satisfied for format, fix them. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: otg initialization is only needed when the gadget is supportedPeter Chen2014-09-231-1/+1
| | | | | | | | | | | | | | | We have only needed to enable otg initialization when both of below conditions are satisfied: - The controller is otg capable - The gadget function is enabled If the controller is otg capable, but is host-only configuration, we do not need to access register otgsc and do any otg operations (eg, create otg workqueue). Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: add TPL support for targeted hostsPeter Chen2014-09-231-0/+4
| | | | | | | | | | For OTG and Embedded hosts, they may need TPL (Targeted Peripheral List) for usb certification and other vender specific requirements, the platform can tell chipidea core driver if it supports tpl through DT or platform data. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: using one inline function to cover queue work operationsPeter Chen2014-05-231-4/+2
| | | | | | | | | The otg queue work include operations: one is disable interrupt, another one is call kernel queue work API. Many codes do this operation, using one inline function to instead of them. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: update TODO listPeter Chen2014-05-231-4/+1
| | | | | | | Update TODO list Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: OTG HNP and SRP fsm implementationLi Jun2014-04-241-6/+18
| | | | | | | | | USB OTG interrupt handling and fsm transitions according to USB OTG and EH 2.0. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Li Jun <b47624@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: core: Add missing module owner fieldAlexander Shiyan2014-04-241-0/+1
| | | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: add proper delay for waiting correct PHY statusPeter Chen2014-04-241-13/+13
| | | | | | | | | | | | | | | After the PHY has powered and initialized, it needs some delay for controller to reflect PHY's status. Some status and values for id, vbus, dp/dm are only stable after this delay. The current code tries to clear id/vbus status without enough delay, it causes the status are not cleared properly. This patch add 2ms delay after phy has initialized, and clear the unexpected status after that. Signed-off-by: Peter Chen <peter.chen@freescale.com> Tested-by: Li Jun <b47624@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: export interrupt enable and status register read functionsLi Jun2014-04-241-0/+20
| | | | | | | | | | This patch moves usb interrupt enable and status register read functions from udc driver to core driver to use them in all ci drivers. Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Li Jun <b47624@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: operate on otgsc register in a general wayLi Jun2014-04-241-6/+10
| | | | | | | | Use a more general way to read and write otgsc register. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Li Jun <b47624@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: coordinate usb phy initialization for different phy typePeter Chen2014-04-241-3/+34
| | | | | | | | | | | | | | | | | | | | | | | For internal PHY (like UTMI), the phy clock may from internal pll, it is on/off on the fly, the access PORTSC.PTS will hang without phy clock. So, the usb_phy_init which will open phy clock needs to be called before hw_phymode_configure. See: http://marc.info/?l=linux-arm-kernel&m=139350618732108&w=2 For external PHY (like ulpi), it needs to configure portsc.pts before visit viewport, or the viewport can't be visited. so phy_phymode_configure needs to be called before usb_phy_init. See: cd0b42c2a6d2a74244f0053f8960f5dad5842278 It may not the best solution, but it can work for all situations. Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Chris Ruehl <chris.ruehl@gtsys.com.hk> Cc: shc_work@mail.ru Cc: denis@eukrea.com Cc: festevam@gmail.com Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: Propagate the real error code on platform_get_irq() failureFabio Estevam2014-02-241-1/+1
| | | | | | | | | | No need to return a 'fake' return value on platform_get_irq() failure. Just return the error code itself instead. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: udc: add maximum-speed = full-speed optionMichael Grzeschik2014-02-241-0/+11
| | | | | | | | | | This patch makes it possible to set the chipidea udc into full-speed only mode. It is set by the oftree property "maximum-speed = full-speed". Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: use dev_get_platdata()Jingoo Han2014-02-241-2/+2
| | | | | | | | | | Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: refine PHY operationPeter Chen2014-02-241-44/+26
| | | | | | | | | - Delete global_phy due to we can get the phy from phy layer now - using devm_usb_get_phy to instead of usb_get_phy - delete the otg_set_peripheral, which should be handled by otg layer Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: put hw_phymode_configure before ci_usb_phy_initChris Ruehl2014-01-131-2/+2
| | | | | | | | | | | hw_phymode_configure configures the PORTSC registers and allow the following phy_inits to operate on the right parameters. This fix a problem where the UPLI (ISP1504) could not be detected, because the Viewport was not available and read the viewport return 0's only. Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flagChris Ruehl2014-01-131-3/+5
| | | | | | | | | | | | | | * init the sts flag to 0 (missed) * fix write the real bit not sts value * Set PORTCS_STS and DEVLC_STS only if sts = 1 [Peter Chen: This one and the next patch fix the problem occurred imx27 and imx31, and imx27 and imx31 usb support are enabled until 3.14, so these two patches isn't needed for -stable] Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: add freescale imx28 special write register methodPeter Chen2014-01-131-0/+2
| | | | | | | | | | | | | | | | | | | According to Freescale imx28 Errata, "ENGR119653 USB: ARM to USB register error issue", All USB register write operations must use the ARM SWP instruction. So, we implement special hw_write and hw_test_and_clear for imx28. Discussion for it at below: http://marc.info/?l=linux-usb&m=137996395529294&w=2 This patch is needed for stable tree 3.11+. Cc: stable@vger.kernel.org Cc: robert.hodaszi@digi.com Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: mark register map as "const" and convert to u8Marc Kleine-Budde2014-01-071-40/+40
| | | | | | | | | | This patch makes the controller register map ci_regs_nolpm and ci_regs_lpm as "const". Further, as all offset fit into a single byte, the type is changed from uintptr_t to u8. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: move malloced regmap directly into struct hw_bankMarc Kleine-Budde2014-01-071-8/+0
| | | | | | | | | | | Without this patch a seperate chunk of memory is allocated for the regmap array. As the regmap is always used it makes no sense to allocate a seperate memory block for it, this patch moves the regmap array directly into the struct hw_bank. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 3.13-rc5 into usb-nextGreg Kroah-Hartman2013-12-241-0/+4
|\ | | | | | | | | | | This resolves the merge issue with drivers/usb/host/ohci-at91.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: chipidea: fix nobody cared IRQ when booting with host rolePeter Chen2013-12-091-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we connect Male-A-To-Male-A cable between otg-host and host pc, the ci->vbus_active is set wrongly, and cause the controller run at peripheral mode when we load gadget module (ci_udc_start will be run), but the software runs at host mode due to id = 0. The ehci_irq can't handle suspend (USBi_SLI) interrupt which is enabled for peripheral mode, it causes no one will handle irq error. This patch is needed for 3.12 stable Cc: stable <stable@vger.kernel.org> Acked-by: Michael Grzeschik <mgr@pengutronix.de> Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: chipidea: Reallocate regmap only if lpm is detectedChris Ruehl2013-12-081-1/+2
|/ | | | | | | | | The regmap only needs to reallocate if the hw_read on the CAP register shows lpm is used. Therefore the if() statement check the change. Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: only get vbus regulator for non-peripheral modePeter Chen2013-10-301-12/+15
| | | | | | | | | | If the user chooses peripheral mode for this controller, the vbus regulator doesn't need to get, since the host will supply the vbus, it can save one vbus pin for other usage. Signed-off-by: Peter Chen <peter.chen@freescale.com> Tested-by: Frank Li <frank.li@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: add ci_hdrc_enter_lpm APIPeter Chen2013-09-301-0/+24
| | | | | | | | | | | This API is used to let the PHY enter/leave low power mode. Before the controller going to work(at probe/resume), it needs to let the PHY leave low power mode. After the controller stopping working(at remove/suspend), it needs to let the PHY enter low power mode to save power consumption. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: move PHY operation to corePeter Chen2013-09-301-6/+51
| | | | | | | PHY operations are common, so move them to core. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 3.12-rc3 into usb-nextGreg Kroah-Hartman2013-09-291-0/+1
|\ | | | | | | | | | | We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OpenPOWER on IntegriCloud