summaryrefslogtreecommitdiffstats
path: root/drivers/usb/chipidea/core.c
Commit message (Collapse)AuthorAgeFilesLines
...
| * usb: chipidea: Fix memleak for ci->hw_bank.regmap when removalPeter Chen2013-09-251-0/+1
| | | | | | | | | | | | | | | | It needs to free ci->hw_bank.regmap explicitly since it is not managed resource. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: chipidea: move platform related things to ci_get_platdataPeter Chen2013-09-251-10/+9
|/ | | | | | | | Like vbus, the dr_mode and phy_mode are also got from glue layer's platform data or device node. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: add wait vbus lower than OTGSC_BSV before role startsPeter Chen2013-08-141-0/+32
| | | | | | | | | | | | | | | When the gadget role starts, we need to make sure the vbus is lower than OTGSC_BSV, or there will be an vbus interrupt since we use B_SESSION_VALID as vbus interrupt to indicate connect and disconnect. When the host role starts, it may not be useful to wait vbus to lower than OTGSC_BSV, but it can indicate some hardware problems like the vbus is still higher than OTGSC_BSV after we disconnect to host some time later (5000 milliseconds currently), which is obvious not correct. Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: add vbus interrupt handlerPeter Chen2013-08-141-5/+23
| | | | | | | | | | | | We add vbus interrupt handler at ci_otg_work, it uses OTGSC_BSV(at otgsc) to know it is connect or disconnet event. Meanwhile, we introduce two flags id_event and b_sess_valid_event to indicate it is an id interrupt or a vbus interrupt. Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: move otg related things to otg filePeter Chen2013-08-141-50/+13
| | | | | | | | | Move otg related things to otg file. Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: disable all interrupts and clear all interrupts statusPeter Chen2013-08-141-1/+10
| | | | | | | | | | | During the initialization, it needs to disable all interrupts enable bit as well as clear all interrupts status bits to avoid exceptional interrupt. Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: add flag CI_HDRC_DUAL_ROLE_NOT_OTGPeter Chen2013-08-141-7/+30
| | | | | | | | | | | | | | | | Since we need otgsc to know vbus's status at some chipidea controllers even it is peripheral-only mode. Besides, some SoCs (eg, AR9331 SoC) don't have otgsc register even the DCCPARAMS_DC and DCCPARAMS_HC are both 1 at CAP_DCCPARAMS. We inroduce flag CI_HDRC_DUAL_ROLE_NOT_OTG to indicate if the controller is dual role, but not supports OTG. If this flag is not set, we follow the rule that if DCCPARAMS_DC and DCCPARAMS_HC are both 1 at CAP_DCCPARAMS, then this controller is otg capable. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: add role init and destroy APIsPeter Chen2013-08-141-2/+8
| | | | | | | | | | | | | - The role's init will be called at probe procedure. - The role's destroy will be called at fail patch at probe and driver's removal. - The role's start/stop will be called when specific role has started. Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: otg: add otg file used to access otgscPeter Chen2013-08-141-1/+2
| | | | | | | | | | This file is mainly used to access otgsc currently, it may add otg related things in the future. Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: move vbus regulator operation to corePeter Chen2013-08-141-0/+23
| | | | | | | | | | | The vbus regulator is a common element for USB vbus operation, So, move it from glue layer to core. Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: remove previous MODULE_ALIASFabio Estevam2013-08-141-1/+0
| | | | | | | | | | After the rename to ci_hdrc we ended up with two MODULE_ALIAS entries, so remove the old one. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: prevent endless loop registering platform_devices when probe ↵Lothar Waßmann2013-08-141-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | fails Commit 40dcd0e ("usb: chipidea: add PTW, PTS and STS handling") introduced the following code to the ci_hdrc_probe() function: + if (!dev->of_node && dev->parent) + dev->of_node = dev->parent->of_node; This inadvertently associates the ci_hdrc device with the ci_hdrc_imx driver (which created the ci_hdrc device in the first place). This results in ci_hdrc_imx_probe() being run for the ci_hdrc device if ci_hdrc_probe() fails for some reason. ci_hdrc_imx_probe() will happily create a new ci_hdrc platform_device whose probing will likewise fail and trigger a new invocation of ci_hdrc_imx_probe() ... ad nauseam. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Reviewed-and-tested-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: don't clobber return value of ci_role_start()Lothar Waßmann2013-08-141-1/+0
| | | | | | | | | If a role fails to start, propagate the error code up the call stack from probe. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: move hw_phymode_configure() into probeFabio Estevam2013-08-141-2/+2
| | | | | | | | | | | | | | | | Currently hw_phymode_configure() is located inside hw_device_reset(), which is only called by chipidea udc driver. When operating in host mode, we also need to call hw_phymode_configure() in order to properly configure the PHY mode, so move this function into probe. After this change, USB Host1 port on mx53qsb board is functional. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Arnaud Patard <arnaud.patard@rtp-net.org> Reviewed-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: drop "13xxx" infixAlexander Shishkin2013-06-241-18/+18
| | | | | | | | | | | | | | "ci13xxx" is bad for at least the following reasons: * people often mistype it * it doesn't add any informational value to the names it's used in * it needlessly attracts mail filters This patch replaces it with "ci_hdrc", "ci_udc" or "ci_hw", depending on the situation. Modules with ci13xxx prefix are also renamed accordingly and aliases are added for compatibility. Otherwise, no functional changes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: introduce dual role mode pdata flagsSascha Hauer2013-06-171-6/+18
| | | | | | | | | | Even if a chipidea core is otg capable the board may not be. This allows to explicitly set the core to host/peripheral mode. Without these flags the driver falls back to the old behaviour. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: add PTW, PTS and STS handlingMichael Grzeschik2013-06-171-0/+48
| | | | | | | | | | | | | This patch makes it possible to configure the PTW, PTS and STS bits inside the portsc register for host and device mode before the driver starts and the phy can be addressed as hardware implementation is designed. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: udc: add multiple td support to hardware_{en,de}queueMichael Grzeschik2013-06-171-1/+0
| | | | | | | | | | | | | | | This patch removes the restriction of having a limited amount of only four active tds on one endpoint. We use the linked list implementation to manage all tds which get added and removed by hardware_{en,de}queue. The removal of this restriction adds the driver to run into a hardware errata. It's possible that the hardware will still address an transfer descriptor that already got cleaned up. To solve this the patch also postpone the cleanup of processed tds by one. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: udc: configure iso endpointsMichael Grzeschik2013-06-171-1/+1
| | | | | | | | | | | | This patch adds iso endpoint support to the device controller. It makes use of the multiplication bits in the maxpacket field of the endpoint and calculates the multiplier bits for each transfer description on every request. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: fix id change handlingAlexander Shishkin2013-06-111-1/+2
| | | | | | | | | | Re-enable chipidea irq even if there's no role changing to do. This is a problem since b183c19f ("USB: chipidea: re-order irq handling to avoid unhandled irqs"); when it manifests, chipidea irq gets disabled for good. Cc: stable@vger.kernel.org # v3.7 Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drivers/usb/chipidea: don't check resource with devm_ioremap_resourceWolfram Sang2013-05-181-5/+0
| | | | | | | | devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
* usb: chipidea: big-endian supportSvetoslav Neykov2013-03-301-1/+1
| | | | | | | | | | | | | Convert between big-endian and little-endian format when accessing the usb controller structures which are little-endian by specification. Fix cases where the little-endian memory layout is taken for granted. The patch doesn't have any effect on the already supported little-endian architectures. Signed-off-by: Svetoslav Neykov <svetoslav@neykov.name> [Alex: minor cosmetic fixes] Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: don't redefine __ffs()Felipe Balbi2013-03-301-4/+4
| | | | | | | | | | | chipidea's ffs_nr() is pretty much what __ffs() does. Use that one instead. Signed-off-by: Felipe Balbi <balbi@ti.com> [rebased on top of debug infrastructure rework] Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: move debug files creation/removal to the coreAlexander Shishkin2013-03-301-1/+5
| | | | | | | | | Create and remove debugfs entries in hdrc probe/remove instead of start/stop of the device controller. Gadget specific will not export anything while the controller is in host mode. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: move role to debugfsAlexander Shishkin2013-03-301-39/+0
| | | | | | | | Manual role switching function is there for debugging purposes, so has to move to debugfs. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: core: switch over to devm_ioremap_resourceFelipe Balbi2013-03-291-5/+3
| | | | | | | | | switch over to the newly added devm_ioremap_resource which provides more consistent error messages. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: trim include list in the coreAlexander Shishkin2013-03-291-3/+0
| | | | | | | | Some headers included in the chipidea controller core are not needed, remove them. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drivers/usb/chipidea/core.c: adjust duplicate testJulia Lawall2013-01-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Delete successive tests to the same location. In this case res has already been tested for being NULL, and calling devm_request_and_ioremap will not make it NULL. On the other hand, devm_request_and_ioremap can return NULL on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @s exists@ local idexpression y; expression x,e; @@ *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } ... when != \(y = e\|y += e\|y -= e\|y |= e\|y &= e\|y++\|y--\|&y\) when != \(XT_GETPAGE(...,y)\|WMI_CMD_BUF(...)\) *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: chipidea: fix use after free bugLothar Waßmann2012-11-261-1/+2
| | | | | | | | | | | | | The pointer to a platform_device struct must not be dereferenced after the device has been unregistered. This bug produces a crash when unloading the ci13xxx kernel module compiled with CONFIG_PAGE_POISONING enabled. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Cc: stable <stable@vger.kernel.org> # 3.6 Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: remove use of __devexitBill Pemberton2012-11-211-1/+1
| | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: remove use of __devinitBill Pemberton2012-11-211-1/+1
| | | | | | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Geoff Levand <geoff@infradead.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Olav Kongas <ok@artecdesign.ee> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: remove use of __devexit_pBill Pemberton2012-11-211-1/+1
| | | | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: chipidea: re-order irq handling to avoid unhandled irqsRichard Zhao2012-09-121-8/+13
| | | | | | | | | | | | | - let role driver handle irq before ID change check; this gives the role driver a chance to handle disconnect; - disable irq during switch role; no role driver to handle irq in the period. Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: chipidea: acknowledge ID change interrupt in irq handlerRichard Zhao2012-09-121-2/+1
| | | | | | | | | | | In order to avoid re-queueing of the role changing work, we need to clear the ID change interrupt bit right in the irq handler. Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: chipidea: delay 2ms before read ID status at probe timeRichard Zhao2012-09-121-0/+2
| | | | | | | | | | | The ID pin needs 1ms debounce time, even at probe time. We delay 2ms to be on the safe side. Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: permit driver bindings pass phy pointerRichard Zhao2012-07-091-0/+4
| | | | | | | | | | | | Sometimes, the driver bindings may know what phy they use. For example, when using device tree, the usb controller may have a phandler pointing to usb phy. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Subodh Nijsure <snijsure@grid-net.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: Chipidea: add ci13xxx device id managementRichard Zhao2012-07-091-5/+16
| | | | | | | | | We use ida_simple_get and ida_simple_remove to manage the ids. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: Chipidea: add unified ci13xxx_{add,remove}_device for platform driversRichard Zhao2012-07-091-0/+43
| | | | | | | | | | Platform drivers do the similar things to add/remove ci13xxx device, so create a unified one. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: Chipidea: rename struct ci13xxx_udc_driver to struct ci13xxx_platform_dataRichard Zhao2012-07-061-6/+6
| | | | | | | | | | | This patch rename struct ci13xxx_udc_driver and var with the type. ci13xxx_platform_data reflect it's passed from platfrom driver. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: remove zero check of hw_ep_maxRichard Zhao2012-05-151-1/+1
| | | | | | | | | | | It's 0 for host only device. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: add host roleAlexander Shishkin2012-05-111-4/+11
| | | | | | | | | | | | | | | | | | | | This adds EHCI host support to the chipidea driver. We want it to be part of the hdrc driver and not a standalone (sub-)driver module, as the structure of ehci-hcd.c suggests, so for chipidea controller we hack it to not provide platform-related code, but only the ehci hcd. The ehci-platform driver won't work for us here too, because the controller uses the same registers for both device and host mode and also otg-related bits, so it's not really possible to put ehci registers into a separate resource. This is not a pretty solution, but the alternative is exporting symbols from the chipidea driver to a ehci-chipidea driver and doing all the module refcounting. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: use common definition for USBMODE bitsAlexander Shishkin2012-05-111-3/+3
| | | | | | | | Some of the bits of USBMODE register are defined in <usb/ehci_def.h>, use them instead of having our own definitions. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: drop unused msm register definitionsAlexander Shishkin2012-05-111-3/+0
| | | | | | | | These definitions are unused, and the same registers are also defined in <linux/usb/msm_hsusb_hw.h>. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: add support for rolesAlexander Shishkin2012-05-111-52/+198
| | | | | | | | | | | | | | Add some generic code for roles and implement simple role switching based on ID pin state and/or a sysfs file. At this, we also rename the device to ci_hdrc, which is what it is. The "manual" switch is made into a sysfs file and not debugfs, because it might be useful even in non-debug context. For some boards, like sheevaplug, it seems to be the only way to switch roles without modifying the hardware, since the ID pin is always grounded. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: split the driver code into unitsAlexander Shishkin2012-05-111-0/+324
Split the driver into the following parts: * core -- resources, register access, capabilities, etc; * udc -- device controller functionality; * debug -- logging events. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OpenPOWER on IntegriCloud