summaryrefslogtreecommitdiffstats
path: root/drivers/usb/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* usb host: Faraday USB2.0 FUSBH200-HCD driverYuan-Hsin Chen2013-05-171-0/+1
| | | | | | | | | | | FUSBH200-HCD is an USB2.0 hcd for Faraday FUSBH200. FUSBH200 is an ehci-like controller with some differences. First, register layout of FUSBH200 is incompatible with EHCI. Furthermore, FUSBH200 is lack of siTDs which means iTDs are used for both HS and FS ISO transfer. Signed-off-by: Yuan-Hsin Chen <yhchen@faraday-tech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: phy: remove CONFIG_USB_OTG_UTILSFelipe Balbi2013-03-181-1/+1
| | | | | | | | | | | | there are no more users of CONFIG_USB_OTG_UTILS left in tree, we can remove it just fine. [ kishon@ti.com : fixed a linking error due to original patch forgetting to change drivers/usb/Makefile ] Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: phy: move all PHY drivers to drivers/usb/phy/Felipe Balbi2013-03-181-2/+0
| | | | | | | | | | | | that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: Makefile: fix drivers/usb/phy/ Makefile entryFelipe Balbi2013-03-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | drivers/usb/phy/ should be compiled everytime we have CONFIG_USB_OTG_UTILS enabled. phy/ should've been part of the build process based on CONFIG_USB_OTG_UTILS, don't know where I had my head when I allowed CONFIG_USB_COMMON there. In fact commit c6156328dec52a55f90688cbfad21c83f8711d84 tried to fix a previous issue but it made things even worse. The real solution is to compile phy/ based on CONFIG_USB_OTG_UTILS which gets selected by all PHY drivers. I only triggered the error recently after accepting a patch which moved a bunch of code from otg/otg.c to phy/phy.c and running 100 randconfig cycles. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: phy: Fix Kconfig dependency for Phy driversAlexandre Pereira da Silva2012-06-261-1/+1
| | | | | | | | | USB phy layer driver are only built if usb host is selected, but they are used too by USB_GADGET drivers Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: move ci13xxx and related code to drivers/usb/chipideaAlexander Shishkin2012-05-111-0/+1
| | | | | | | | | | | | | Since chipidea is a dual role controller, it makes sense to move it to its own directory, where we can also have host, otg and platform code related to this controller. It also makes sense to break out the driver into several compilation units like udc, host, debugging code, etc. Firstly, let's move the udc and platform code to drivers/usb/chipidea. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: Add driver for NXP ISP1301 USB transceiverRoland Stigge2012-05-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | This new driver registers the NXP ISP1301 chip via the I2C subsystem. The chip is the USB transceiver shared by ohci-nxp, lpc32xx_udc (gadget) and isp1301_omap. ISP1301 is a very low-level driver that primarily separates out the I2C client registration of the ISP1301 chip (including instantiation via DT), used by other drivers, and declares the chip's registers. It's only a helper driver for some OHCI and USB device drivers. The driver can be considered as a register set extension of ohci-nxp, lpc32xx-udc and isp1301_omap, which in turn know best what to do with the low level functionality (individual ISP1301 registers and timing, see the different initialization strategies in those drivers). Those drivers previously internally duplicated ISP1301 register definitions which is solved by this new isp1301 driver. The ISP1301 registers exposed via isp1301.h can be accessed by other drivers using it with standard i2c_smbus_*() accesses. Following patches let the respective USB host and gadget drivers use this driver, instead of duplicating ISP1301 handling. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: OTG should be linked before HostNeil Zhang2011-11-261-1/+2
| | | | | | | | | | For OTG controller, the host driver will call function otg_get_transceiver to get the otg transceiver, so we need to init the OTG driver before HOST. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: Provide usb_speed_string() functionMichal Nazarewicz2011-09-181-0/+2
| | | | | | | | | | | | | | | | | | | In a few places in the kernel, the code prints a human-readable USB device speed (eg. "high speed"). This involves a switch statement sometimes wrapped around in ({ ... }) block leading to code repetition. To mitigate this issue, this commit introduces usb_speed_string() function, which returns a human-readable name of provided speed. It also changes a few places switch was used to use this new function. This changes a bit the way the speed is printed in few instances at the same time standardising it. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: Introduce DesignWare USB3 DRD DriverFelipe Balbi2011-08-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DesignWare USB3 is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI) configurations. Several other parameters can be configured like amount of FIFO space, amount of TX and RX endpoints, amount of Host Interrupters, etc. The current driver has been validated with a virtual model of version 1.73a of that core and with an FPGA burned with version 1.83a of the DRD core. We have support for PCIe bus, which is used on FPGA prototyping, and for the OMAP5, more adaptation (or glue) layers can be easily added and the driver is half prepared to handle any possible configuration the HW engineer has chosen considering we have the information on one of the GHWPARAMS registers to do runtime checking of certain features. More runtime checks can, and should, be added in order to make this driver even more flexible with regards to number of endpoints, FIFO sizes, transfer types, etc. While this supports only the device side, for now, we will add support for Host side (xHCI - see the updated series Sebastian has sent [1]) and OTG after we have it all stabilized. [1] http://marc.info/?l=linux-usb&m=131341992020339&w=2 Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix build of FSL MPH DR OF platform driverAnatolij Gustschin2011-05-021-0/+1
| | | | | | | | | | | | | | | When only FSL USB gadget driver is selected in the kernel configuration the MPH DR OF driver for creation of FSL USB platform devices from device tree won't be built. As a result no USB platform devices for MPH DR USB controller will be created at run time and no probing will be done in the fsl_udc_core driver. Add an entry to the Makefile to build the MPH DR OF platform driver if CONFIG_USB_FSL_MPH_DR_OF is defined. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: don't enter usb subdirectories directlyFelipe Balbi2011-04-131-0/+5
| | | | | | | | | Instead, make we enter usb/ directory on all needed cases and enter the subdirectories from drivers/usb/Makefile. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: drivers/usb/Makefile: conditionally descend to 'early'Nicolas Kaiser2010-08-101-1/+1
| | | | | | | | | Don't descend to the EARLY_PRINTK_DBGP directory unless it is actually used. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: MXC: Add i.MX21 specific USB host controller driver.Martin Fuzzey2010-03-021-0/+1
| | | | | | | | | This driver is a Full / Low speed only USB host for the i.MX21. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Fix double-linking of drivers/usb/otg when ULPI is selectedBill Gatliff2009-12-231-2/+0
| | | | | | | | | | | | | This patch corrects a problem where drivers/usb/otg is linked twice if CONFIG_USB_ULPI is selected, resulting in a build error (symbol conflict). The files in that directory are properly linked already as part of CONFIG_USB, and need not be indicated specifically for CONFIG_USB_ULPI. Signed-off-by: Bill Gatliff <bgat@billgatliff.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB OTG: Add generic driver for ULPI OTG transceiverDaniel Mack2009-12-111-0/+2
| | | | | | | | | | | | | | This adds a minimal generic driver for ULPI connected transceivers, using the OTG framework functions recently introduced. The driver got a table to match the ULPI chips, which currently only has one entry for NXP's ISP 1504 transceiver. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Heikki Krogerus <ext-heikki.krogerus@nokia.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ehci,dbgp,early_printk: split ehci debug driver from early_printk.cJason Wessel2009-09-231-0/+1
| | | | | | | | | | | | | | | | | | Move the dbgp early printk driver in advance of refactoring and adding new code, so the changes to this code are tracked separately from the move of the code. The drivers/usb/early directory will be the location of the current and future early usb code for driving usb devices prior initializing the standard interrupt driven USB drivers. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: NXP ISP1362 USB host driverLothar Wassmann2009-09-231-0/+1
| | | | | | | | | Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: xhci: Add Makefile, MAINTAINERS, and Kconfig entries.Sarah Sharp2009-06-151-0/+1
| | | | | | | | | Add Makefile and Kconfig entries for the xHCI host controller driver. List Sarah Sharp as the maintainer for the xHCI driver. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Revert "USB: Correct Makefile to make isp1760 buildable"Mike Frysinger2009-05-281-1/+0
| | | | | | | | | | | | | | | This reverts commit 26e1287594864169577327fef233befc9739be3b. A larger patch (f7e7aa585) a few days after this one added the same line to the Makefile, but in a different place. While it'd be more correct to revert that one, it's easier to revert this one because this is a one-liner. Signed-off-by: Mike Frysinger <vapier@gentoo.org> CC: Greg Kroah-Hartman <gregkh@suse.de> CC: linux-usb@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Fix makefile so that CONFIG_WDM and CONFIG_TMC work.Andy Lutomirski2009-05-081-0/+2
| | | | | | | | | If CONFIG_USB_ACM and CONFIG_USB_PRINTER are not set, then cdc-wdm and usbtmc won't get built. Signed-off-by: Andy Lutomirski <amluto@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add platform device support for the ISP1760 USB chipCatalin Marinas2009-03-241-0/+1
| | | | | | | | | | | | | | Currently, the driver only supports PCI and PPC_OF but there are boards like ARM RealView where this is a platform device. The patch adds the necessary functions and registration to the isp1760-if.c file and modifies the corresponding Makefile and Kconfig to be able to use this driver even if PCI and PPC_OF are not enabled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Correct Makefile to make isp1760 buildableIvan Kuten2009-02-091-0/+1
| | | | | | | | Signed-off-by: Ivan Kuten <ivan.kuten@promwad.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Driver for Freescale QUICC Engine USB Host ControllerAnton Vorontsov2009-01-271-0/+1
| | | | | | | | | | | | | | | | | | This patch adds support for the FHCI USB controller, as found in the Freescale MPC836x and MPC832x processors. It can support Full or Low speed modes. Quite a lot the hardware is doing by itself (SOF generation, CRC generation and checking), though scheduling and retransmission is on software's shoulders. This controller does not integrate the root hub, so this driver also fakes one-port hub. External hub is required to support more than one device. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* wusb: add HWA host controller driverInaky Perez-Gonzalez2008-09-171-0/+1
| | | | | | | Add a driver for Wireless USB host controllers connected via USB (a Host Wire Adapter or HWA). Signed-off-by: David Vrabel <david.vrabel@csr.com>
* wusb: add the Wireless USB core (build-system)Greg Kroah-Hartman2008-09-171-0/+2
| | | | | | | Add the WUSB build system (Kconfig and Kbuild) files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David Vrabel <david.vrabel@csr.com>
* USB: add Cypress c67x00 OTG controller HCD driverPeter Korsgaard2008-05-021-0/+2
| | | | | | | | This patch adds HCD support for the Cypress c67x00 family of devices. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: always visit drivers/usb/misc/Adrian Bunk2007-10-121-22/+1
| | | | | | | | | | | | | Currently, every driver under drivers/usb/misc/ also has to be listed in drivers/usb/Makefile. This has been forgotten more than once, and this patch changes drivers/usb/Makefile to simply always visit drivers/usb/misc/ when building the USB code. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Toralf Förster <toralf.foerster@gmx.de> Acked-by: Satyam Sharma <satyam@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add drivers/usb/misc/iowarrior.c to the MakefileNico Erfurth2007-10-121-0/+1
| | | | | | | | | | This patch adds the new iowarrior module to the Makefile in drivers/usb. Currently the module isn't build unless another driver from usb/misc is selected. Signed-off-by: Nico Erfurth <masta@perlgolf.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: devices misc: Trivial patch to build the IOWARRIOR when it is selected ↵Juergen Beisert2007-07-301-0/+1
| | | | | | | | | | in Kconfig Trivial patch to build the IOWARRIOR when it is selected in Kconfig. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove Makefile reference to obsolete OHCI_AT91Robert P. J. Day2007-07-121-1/+0
| | | | | | | Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: r8a66597-hcd: host controller driver for R8A66597Yoshihiro Shimoda2007-07-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | I would like to submit Renesas R8A66597 USB HCD driver. R8A66597 is Renesas USB 2.0 host and peripheral combined controller device originally designed for embedded products. As a limitation of this device, it does not support externel hub more than 2 tier, and cannot communicate with a USB device more than 10. Then this device is not compatible with EHCI and/or OHCI, I wrote driver support patch based on sl811 code. This driver has the following unique specifications: - Implement transfer timeout to share one pipe with plural endpoint. - Detach detection of a USB device connected to externel hub. The driver has been tested external hub, usb-hdd, usb-cdrom, usb-speaker, mice, keyboard, and usbtest driver. Signed-off-by : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Move USB network drivers to drivers/net/usb.Jeff Garzik2007-05-091-7/+0
| | | | | | | | | | | | It is preferable to group drivers by usage (net, scsi, ATA, ...) than by bus. When reviewing drivers, the [PCI|USB|PCMCIA|...] maintainer is probably less qualified on networking issues than a networking maintainer. Also, from a practical standpoint, chips often appear on multiple buses, which is why we do not put drivers into drivers/pci/net. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Input: move USB miscellaneous devices under drivers/input/miscDmitry Torokhov2007-05-081-3/+0
| | | | | | | | This will allow concentrating all input devices in one place in {menu|x|q}config. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
* Input: move USB gamepads under drivers/input/joystickDmitry Torokhov2007-05-081-1/+0
| | | | | | | | This will allow concentrating all input devices in one place in {menu|x|q}config. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
* Input: move USB touchscreens under drivers/input/touchscreenDmitry Torokhov2007-05-081-1/+0
| | | | | | | | This will allow concentrating all input devices in one place in {menu|x|q}config. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
* Input: move USB tablets under drivers/input/tabletDmitry Torokhov2007-05-081-4/+0
| | | | | | | | This will allow concentrating all input devices in one place in {menu|x|q}config. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'for-linus' of ↵Linus Torvalds2007-04-301-3/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid: (21 commits) USB HID: don't warn on idVendor == 0 USB HID: add 'quirks' module parameter USB HID: add support for dynamically-created quirks USB HID: clarify static quirk handling as squirks USB HID: encapsulate quirk handling into hid-quirks.c USB HID: EMS USBII device needs HID_QUIRK_MULTI_INPUT HID: update copyright and authorship macro HID: introduce proper zeroing of unused bits in output reports USB HID: add support for WiseGroup MP-8800 Quad Joypad USB HID: add FF support for Logitech Force 3D Pro Joystick USB HID: numlock quirk for dell W7658 keyboard USB HID: Logitech MX3000 keyboard needs report descriptor quirk USB HID: extend quirk for Logitech S510 keyboard USB HID: usbkbd/usbmouse - handle errors when registering devices USB HID: add QUIRK_HIDDEV for Belkin Flip KVM HID: enable dead keys on a belkin wireless keyboard USB HID: Thustmaster firestorm dual power v1 support USB HID: specify explicit size for hid_blacklist.quirks USB HID: fix retry & reset logic USB HID: consolidate vendor/product ids ...
| * USB HID: move usbhid code from drivers/usb/input to drivers/hid/usbhidJiri Kosina2007-04-111-3/+0
| | | | | | | | | | | | | | | | Separate usbhid code into dedicated drivers/hid/usbhid directory as discussed previously with Greg, so that it eases maintaineance process. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | USB: remove ancient/broken CRIS hcdDavid Brownell2007-04-271-1/+0
|/ | | | | | | | | | | | | | | Remove the old crisv10 HCD ... it can't have built for some time, doesn't even have a Kconfig entry, was the last driver not to have been converted to the "hcd" framework, and considering the usbcore changes since its last patch was merged, has just got to buggy as all get-out. I'm told Axis has a new driver, and will be submitting it soon. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Driver to charge USB blackberry devicesGreg Kroah-Hartman2007-02-161-0/+1
| | | | | | | | | | | | | A simple driver to turn on the charging capability of a USB BlackBerry device when it is plugged into the machine. It does not bind to the device, so all userspace programs can still sync properly with it. Note, if CONFIG_USB_SUSPEND is enabled, it can play havoc with this device as the power to the port will be shut down. This device id will have to be added to the global blacklist table when it is created. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: move trancevibrator.c to the proper usb directoryGreg Kroah-Hartman2006-10-171-1/+1
| | | | | | | | | | It's not a input driver, so it doesn't belong in the input directory. Cc: Sam Hocevar <sam@zoy.org> Cc: Dmitry Torokhov <dtor@insightbb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: u132-hcd: host controller driver for ELAN U132 adapterTony Olech2006-09-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This "u132-hcd" module is one half of the "driver" for ELAN's U132 which is a USB to CardBus OHCI controller adapter. This module needs the "ftdi-elan" module in order to communicate to CardBus OHCI controller inserted into the U132 adapter. When the "ftdi-elan" module detects a supported CardBus OHCI controller in the U132 adapter it loads this "u132-hcd" module. Upon a successful device probe() the single workqueue is started up which does all the processing of commands from the USB core that implement the host controller. The workqueue maintains the urb queues and issues commands via the functions exported by the "ftdi-elan" module. Each such command will result in a callback. Note that the "ftdi-elan" module is a USB client driver. Note that this "u132-hcd" module is a (cut-down OHCI) host controller. Thus we have a topology with the parent of a host controller being a USB client! This really stresses the USB subsystem semaphore/mutex handling in the module removal. Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ftdi-elan: client driver for ELAN Uxxx adaptersTony Olech2006-09-271-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This "ftdi-elan" module is one half of the "driver" for ELAN's Uxxx series adapters which are USB to PCMCIA CardBus adapters. Currently only the U132 adapter is available and it's module is called "u132-hcd". When the USB hot plug subsystem detects a Uxxx series adapter it should load this module. Upon a successful device probe() the jtag device file interface is created and the status workqueue started up. The jtag device file interface exists for the purpose of updating the firmware in the Uxxx series adapter, but as yet it had never been used. The status workqueue initializes the Uxxx and then sits there polling the Uxxx until a supported PCMCIA CardBus device is detected it will start the command and respond workqueues and then load the module that handles the device. This will initially be only the u132-hcd module. The status workqueue then just polls the Uxxx looking for card ejects. The command and respond workqueues implement a command sequencer for communicating with the firmware on the other side of the FTDI chip in the Uxxx. This "ftdi-elan" module exports some functions to interface with the sequencer. Note that this module is a USB client driver. Note that the "u132-hcd" module is a (cut-down OHCI) host controller. Thus we have a topology with the parent of a host controller being a USB client! This really stresses the USB subsystem semaphore/mutex handling in the module removal. Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add PlayStation 2 Trance Vibrator driverSam Hocevar2006-09-271-1/+2
| | | | | | | | | | | This patch is a driver for the PlayStation 2 specific Trance Vibrator device. The only thing that device can do is vibrate at various speeds. Signed-off-by: Sam Hocevar <sam@zoy.org> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Luiz Fernando N. Capitulino" <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add ADU support for Ontrak ADU devicesSteven Haigh2006-09-271-0/+1
| | | | | | | | | | This patch adds support for Ontrak ADU USB devices. Fixed for printk issues by Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Steven Haigh <netwiz@crc.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: rename Cypress CY7C63xxx driver to proper name and fix up some ↵Oliver Bock2006-07-121-1/+1
| | | | | | | | | | | | | | tiny things This is a new driver for the Cypress CY7C63xxx mirco controller series. It currently supports the pre-programmed CYC63001A-PC by AK Modul-Bus GmbH. It's based on a kernel 2.4 driver (cyport) by Marcus Maul which I ported to kernel 2.6 using sysfs. I intend to support more controllers of this family (and more features) as soon as I get hold of the required IDs etc. Please see the source code's header for more information. Signed-off-by: Oliver Bock <o.bock@fh-wolfenbuettel.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: new driver for Cypress CY7C63xxx mirco controllersOliver Bock2006-06-211-0/+1
| | | | | | | | | | | | This is a new driver for the Cypress CY7C63xxx mirco controller series. It currently supports the pre-programmed CYC63001A-PC by AK Modul-Bus GmbH. It's based on a kernel 2.4 driver (cyport) by Marcus Maul which I ported to kernel 2.6 using sysfs. I intend to support more controllers of this family (and more features) as soon as I get hold of the required IDs etc. Please see the source code's header for more information. Signed-off-by: Oliver Bock <o.bock@fh-wolfenbuettel.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] Driver for Apple Cinema Displayakpm@osdl.org2006-06-211-0/+1
| | | | | | | | | | | | | This is a driver to control the brightness of an Apple Cinema Display over USB. It updates the local brightness value if the user presses a button on the display. Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch> Cc: Oliver Neukum <oliver@neukum.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* V4L/DVB (3599a): Move drivers/usb/media to drivers/media/videoMauro Carvalho Chehab2006-03-251-14/+0
| | | | | | | | | | | | | | | Because of historic reasons, there are two separate directories with V4L stuff. Most drivers are located at driver/media/video. However, some code for USB Webcams were inserted under drivers/usb/media. This makes difficult for module authors to know were things should be. Also, makes Kconfig menu confusing for normal users. This patch moves all V4L content under drivers/usb/media to drivers/media/video, and fixes Kconfig/Makefile entries. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
OpenPOWER on IntegriCloud