summaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi.c
Commit message (Collapse)AuthorAgeFilesLines
* spi: Clear SPI_CS_HIGH flag from bad_bits for GPIO chip-selectSerge Semin2019-05-021-0/+5
| | | | | | | | | | | | | | | | | | | | | | When GPIO chip-select is used nothing prevents any available SPI controllers to work with both CS-high and traditional CS-low modes. In fact the SPI bus core code already does it, so we don't need to introduce any modification there. But spi_setup() still fails to switch the interface settings if CS-high flag is set for the case of GPIO-driven slave chip-select when the SPI controller doesn't support the hardwired CS-inversion. Lets fix it by clearing the SPI_CS_HIGH flag out from bad_bits (unsupported by controller) when client chip is selected by GPIO. This feature is useful for slave devices, which in accordance with communication protocol can work with both active-high and active-low chip-selects. I am aware of one such device. It is MMC-SPI interface, when at init sequence the driver needs to perform a read operation with low and high chip-select sequentially (requirement of 74 clock cycles with both chipselect, see the mmc_spi driver for details). Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: Release spi_res after finalizing messageNoralf Trønnes2019-05-021-2/+2
| | | | | | | | | | spi_split_transfers_maxsize() can be used to split a transfer. This function uses spi_res to lifetime manage the added transfer structures. So in order to finalize the current message while it contains the split transfers, spi_res_release() must be called after finalizing. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: Remove warning in spi_split_transfers_maxsize()Noralf Trønnes2019-05-021-5/+0
| | | | | | | | Don't warn about splitting transfers, the info is available in the statistics if needed. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: Remove one needless transfer speed fall back caseJarkko Nikula2019-05-021-2/+0
| | | | | | | | | | Falling back to maximum speed of the controller in case of SPI slave maximum speed is not set is needless. It already defaults to maximum speed of the controller since commit 052eb2d49006 ("spi: core: Set max_speed_hz of spi_device default to max_speed_hz of controller"). Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: add a method for configuring CS timingSowjanya Komatineni2019-04-081-0/+15
| | | | | | | | | | | | This patch creates set_cs_timing SPI master optional method for SPI masters to implement configuring CS timing if applicable. This patch also creates spi_cs_timing accessory for SPI clients to use for requesting SPI master controllers to configure device requested CS setup time, hold time and inactive delay. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: kill useless initializer in spi_register_controller()Sergei Shtylyov2019-04-081-1/+1
| | | | | | | | The 'status' local variable is initialized but this value is never used, thus kill that initializer. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: Don't call spi_get_gpio_descs() before device name is setAndrey Smirnov2019-04-051-18/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move code calling spi_get_gpio_descs() to happen after ctlr->dev's name is set in order to have proper GPIO consumer names. Before: cat /sys/kernel/debug/gpio gpiochip0: GPIOs 0-31, parent: platform/40049000.gpio, vf610-gpio: gpio-6 ( |regulator-usb0-vbus ) out lo gpiochip1: GPIOs 32-63, parent: platform/4004a000.gpio, vf610-gpio: gpio-36 ( |scl ) in hi gpio-37 ( |sda ) in hi gpio-40 ( |(null) CS1 ) out lo gpio-41 ( |(null) CS0 ) out lo ACTIVE LOW gpio-42 ( |miso ) in hi gpio-43 ( |mosi ) in lo gpio-44 ( |sck ) out lo After: cat /sys/kernel/debug/gpio gpiochip0: GPIOs 0-31, parent: platform/40049000.gpio, vf610-gpio: gpio-6 ( |regulator-usb0-vbus ) out lo gpiochip1: GPIOs 32-63, parent: platform/4004a000.gpio, vf610-gpio: gpio-36 ( |scl ) in hi gpio-37 ( |sda ) in hi gpio-40 ( |spi0 CS1 ) out lo gpio-41 ( |spi0 CS0 ) out lo ACTIVE LOW gpio-42 ( |miso ) in hi gpio-43 ( |mosi ) in lo gpio-44 ( |sck ) out lo Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-spi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
* Merge branch 'spi-5.1' into spi-5.2Mark Brown2019-04-051-0/+2
|\
| * spi: Add missing error handling for CS GPIOsGeert Uytterhoeven2019-04-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While devm_gpiod_get_index_optional() returns NULL if the GPIO is not present (i.e. -ENOENT), it may still return other error codes, like -EPROBE_DEFER. Currently these are not handled, leading to unrecoverable failures later in case of probe deferral: gpiod_set_consumer_name: invalid GPIO (errorpointer) gpiod_direction_output: invalid GPIO (errorpointer) gpiod_set_value_cansleep: invalid GPIO (errorpointer) gpiod_set_value_cansleep: invalid GPIO (errorpointer) gpiod_set_value_cansleep: invalid GPIO (errorpointer) Detect and propagate errors to fix this. Fixes: f3186dd876697e69 ("spi: Optionally use GPIO descriptors for CS GPIOs") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: export tracepoint symbols to modulesArnd Bergmann2019-03-211-0/+2
|/ | | | | | | | | | | | | | | | The newly added tracepoints in the spi-mxs driver cause a link error when the driver is a loadable module: ERROR: "__tracepoint_spi_transfer_stop" [drivers/spi/spi-mxs.ko] undefined! ERROR: "__tracepoint_spi_transfer_start" [drivers/spi/spi-mxs.ko] undefined! I'm not quite sure where to put the export statements, but directly after the inclusion of the header seems as good as any other place. Fixes: f3fdea3af405 ("spi: mxs: add tracing to custom .transfer_one_message callback") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: Fix zero length xfer bugChris Lesiak2019-03-111-0/+2
| | | | | | | | | | | | | | | | | | | | | | | This fixes a bug for messages containing both zero length and unidirectional xfers. The function spi_map_msg will allocate dummy tx and/or rx buffers for use with unidirectional transfers when the hardware can only do a bidirectional transfer. That dummy buffer will be used in place of a NULL buffer even when the xfer length is 0. Then in the function __spi_map_msg, if he hardware can dma, the zero length xfer will have spi_map_buf called on the dummy buffer. Eventually, __sg_alloc_table is called and returns -EINVAL because nents == 0. This fix prevents the error by not using the dummy buffer when the xfer length is zero. Signed-off-by: Chris Lesiak <chris.lesiak@licor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: use gpio[d]_set_value_cansleep for setting chipselect GPIOFelix Fietkau2019-02-121-2/+3
| | | | | | | | | | Sleeping is safe inside spi_transfer_one_message, and some GPIO chips are running on slow busses (such as I2C GPIO expanders) and need to sleep for setting values. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: support inter-word delay requirement for devicesJonas Bonn2019-01-301-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some devices are slow and cannot keep up with the SPI bus and therefore require a short delay between words of the SPI transfer. The example of this that I'm looking at is a SAMA5D2 with a minimum SPI clock of 400kHz talking to an AVR-based SPI slave. The AVR cannot put bytes on the bus fast enough to keep up with the SoC's SPI controller even at the lowest bus speed. This patch introduces the ability to specify a required inter-word delay for SPI devices. It is up to the controller driver to configure itself accordingly in order to introduce the requested delay. Note that, for spi_transfer, there is already a field word_delay that provides similar functionality. This field, however, is specified in clock cycles (and worse, SPI controller cycles, not SCK cycles); that makes this value dependent on the master clock instead of the device clock for which the delay is intended to provide some relief. This patch leaves this old word_delay in place and provides a time-based word_delay_us alongside it; the new field fits in the struct padding so struct size is constant. There is only one in-kernel user of the word_delay field and presumably that driver could be reworked to use the time-based value instead. The time-based delay is limited to 8 bits as these delays are intended to be short. The SAMA5D2 that I've tested this on limits delays to a maximum of ~100us, which is already many word-transfer periods even at the minimum transfer speed supported by the controller. Signed-off-by: Jonas Bonn <jonas@norrbonn.se> CC: Mark Brown <broonie@kernel.org> CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: linux-spi@vger.kernel.org CC: devicetree@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: Support high CS when using descriptorsLinus Walleij2019-01-241-0/+5
| | | | | | | | | | | | | | | | | | | | | | | All controllers using GPIO descriptors can by definition support high CS connections, so just enforce this when registering an SPI controller. This fixes a regression where controllers were missing SPI_CS_HIGH, the drivers would fail like this: spi spi0.0: setup: unsupported mode bits 4 cdns-spi fd0b0000.spi: can't setup spi0.0, status -22 This is because as using descriptors moves the CS inversion logic over to gpiolib, all such controllers are registered with CS active high. Cc: Jan Kotas <jank@cadence.com> Reported-by: Jan Kotas <jank@cadence.com> Tested-by: Jan Kotas <jank@cadence.com> Fixes: f3186dd87669 ("spi: Optionally use GPIO descriptors for CS GPIOs") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: Go back to immediate teardownMark Brown2019-01-231-89/+33
| | | | | | | | | | | | Commit 412e6037324 ("spi: core: avoid waking pump thread from spi_sync instead run teardown delayed") introduced regressions on some boards, apparently connected to spi_mem not triggering shutdown properly any more. Since we've thus far been unable to figure out exactly where the breakage is revert the optimisation for now. Reported-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: kernel@martin.sperl.org
* spi: core: avoid waking pump thread from spi_sync instead run teardown delayedMartin Sperl2019-01-091-33/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When spi_sync is running alone with no other spi devices connected to the bus the worker thread is woken during spi_finalize_current_message to run the teardown code every time. This is totally unnecessary in the case that there is no message queued. On a multi-core system this results in one wakeup of the thread for each spi_message processed via spi_sync where in most cases the teardown does not happen as the hw is already in use. This patch now delays the teardown by 1 second by using a separate kthread_delayed_work for the teardown. This avoids waking the kthread too often. For spi_sync transfers in a tight loop (say 40k messages/s) this avoids the penalty of waking the worker thread 40k times/s. On a rasperry pi 3 with 4 cores the results in 32% of a single core only to find out that there is nothing in the queue and it can go back to sleep. With this patch applied the spi-worker is woken exactly once: after the load finishes and the spi bus is idle for 1 second. I believe I have also seen situations where during a spi_sync loop the worker thread (triggered by the last message finished) is slightly faster and _wins_ the race to process the message, so we are actually running the kthread and letting it do some work... This is also no longer observed with this patch applied as. Tested with a new CAN controller driver for the mcp2517fd which uses spi_sync for interrupt handling and spi_async for scheduling of can frames for transmission (in a different thread) Some statistics when receiving 100000 CAN frames with the mcp25xxfd driver on a Raspberry pi 3: without the patch: ------------------ root@raspcm3:~# for x in $(pgrep spi0) $(pgrep irq/94-mcp25xxf) ; do awk '{printf "%-20s %6i\n", $2,$15}' /proc/$x/stat; done (spi0) 5 (irq/94-mcp25xxf) 0 root@raspcm3:~# vmstat 1 procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 1 0 0 821960 13592 50848 0 0 80 2 1986 105 1 2 97 0 0 0 0 0 821968 13592 50876 0 0 0 0 8046 30 0 0 100 0 0 0 0 0 821936 13592 50876 0 0 0 0 8032 24 0 0 100 0 0 0 0 0 821936 13592 50876 0 0 0 0 8035 30 0 0 100 0 0 0 0 0 821936 13592 50876 0 0 0 0 8033 22 0 0 100 0 0 2 0 0 821936 13592 50876 0 0 0 0 11598 7129 0 3 97 0 0 1 0 0 821872 13592 50876 0 0 0 0 37741 59003 0 31 69 0 0 2 0 0 821840 13592 50876 0 0 0 0 37762 59078 0 29 71 0 0 2 0 0 821776 13592 50876 0 0 0 0 37593 58792 0 28 72 0 0 1 0 0 821744 13592 50876 0 0 0 0 37642 58881 0 30 70 0 0 2 0 0 821680 13592 50876 0 0 0 0 37490 58602 0 27 73 0 0 1 0 0 821648 13592 50876 0 0 0 0 37412 58418 0 29 71 0 0 1 0 0 821584 13592 50876 0 0 0 0 37337 58288 0 27 73 0 0 1 0 0 821552 13592 50876 0 0 0 0 37584 58774 0 27 73 0 0 0 0 0 821520 13592 50876 0 0 0 0 18363 20566 0 9 91 0 0 0 0 0 821520 13592 50876 0 0 0 0 8037 32 0 0 100 0 0 0 0 0 821520 13592 50876 0 0 0 0 8031 23 0 0 100 0 0 0 0 0 821520 13592 50876 0 0 0 0 8034 26 0 0 100 0 0 0 0 0 821520 13592 50876 0 0 0 0 8033 24 0 0 100 0 0 ^C root@raspcm3:~# for x in $(pgrep spi0) $(pgrep irq/94-mcp25xxf) ; do awk '{printf "%-20s %6i\n", $2,$15}' /proc/$x/stat; done (spi0) 228 (irq/94-mcp25xxf) 794 root@raspcm3:~# cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 17: 34 0 0 0 ARMCTRL-level 1 Edge 3f00b880.mailbox 27: 1 0 0 0 ARMCTRL-level 35 Edge timer 33: 1416870 0 0 0 ARMCTRL-level 41 Edge 3f980000.usb, dwc2_hsotg:usb1 34: 1 0 0 0 ARMCTRL-level 42 Edge vc4 35: 0 0 0 0 ARMCTRL-level 43 Edge 3f004000.txp 40: 1753 0 0 0 ARMCTRL-level 48 Edge DMA IRQ 42: 11 0 0 0 ARMCTRL-level 50 Edge DMA IRQ 44: 11 0 0 0 ARMCTRL-level 52 Edge DMA IRQ 45: 0 0 0 0 ARMCTRL-level 53 Edge DMA IRQ 66: 0 0 0 0 ARMCTRL-level 74 Edge vc4 crtc 69: 0 0 0 0 ARMCTRL-level 77 Edge vc4 crtc 70: 0 0 0 0 ARMCTRL-level 78 Edge vc4 crtc 77: 20 0 0 0 ARMCTRL-level 85 Edge 3f205000.i2c, 3f804000.i2c, 3f805000.i2c 78: 6346 0 0 0 ARMCTRL-level 86 Edge 3f204000.spi 80: 205 0 0 0 ARMCTRL-level 88 Edge mmc0 81: 493 0 0 0 ARMCTRL-level 89 Edge uart-pl011 89: 0 0 0 0 bcm2836-timer 0 Edge arch_timer 90: 4291 3821 2180 1649 bcm2836-timer 1 Edge arch_timer 94: 14289 0 0 0 pinctrl-bcm2835 16 Level mcp25xxfd IPI0: 0 0 0 0 CPU wakeup interrupts IPI1: 0 0 0 0 Timer broadcast interrupts IPI2: 3645 242371 7919 1328 Rescheduling interrupts IPI3: 112 543 273 194 Function call interrupts IPI4: 0 0 0 0 CPU stop interrupts IPI5: 1 0 0 0 IRQ work interrupts IPI6: 0 0 0 0 completion interrupts Err: 0 top shows 93% for the mcp25xxfd interrupt handler, 31% for spi0. with the patch: --------------- root@raspcm3:~# for x in $(pgrep spi0) $(pgrep irq/94-mcp25xxf) ; do awk '{printf "%-20s %6i\n", $2,$15}' /proc/$x/stat; done (spi0) 0 (irq/94-mcp25xxf) 0 root@raspcm3:~# vmstat 1 procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- 0 0 0 804768 13584 62628 0 0 0 0 8038 24 0 0 100 0 0 0 0 0 804768 13584 62628 0 0 0 0 8042 25 0 0 100 0 0 1 0 0 804704 13584 62628 0 0 0 0 9603 2967 0 20 80 0 0 1 0 0 804672 13584 62628 0 0 0 0 9828 3380 0 24 76 0 0 1 0 0 804608 13584 62628 0 0 0 0 9823 3375 0 23 77 0 0 1 0 0 804608 13584 62628 0 0 0 12 9829 3394 0 23 77 0 0 1 0 0 804544 13584 62628 0 0 0 0 9816 3362 0 22 78 0 0 1 0 0 804512 13584 62628 0 0 0 0 9817 3367 0 23 77 0 0 1 0 0 804448 13584 62628 0 0 0 0 9822 3370 0 22 78 0 0 1 0 0 804416 13584 62628 0 0 0 0 9815 3367 0 23 77 0 0 0 0 0 804352 13584 62628 0 0 0 84 9222 2250 0 14 86 0 0 0 0 0 804352 13592 62620 0 0 0 24 8131 209 0 0 93 7 0 0 0 0 804320 13592 62628 0 0 0 0 8041 27 0 0 100 0 0 0 0 0 804352 13592 62628 0 0 0 0 8040 26 0 0 100 0 0 root@raspcm3:~# for x in $(pgrep spi0) $(pgrep irq/94-mcp25xxf) ; do awk '{printf "%-20s %6i\n", $2,$15}' /proc/$x/stat; done (spi0) 0 (irq/94-mcp25xxf) 767 root@raspcm3:~# cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 17: 29 0 0 0 ARMCTRL-level 1 Edge 3f00b880.mailbox 27: 1 0 0 0 ARMCTRL-level 35 Edge timer 33: 1024412 0 0 0 ARMCTRL-level 41 Edge 3f980000.usb, dwc2_hsotg:usb1 34: 1 0 0 0 ARMCTRL-level 42 Edge vc4 35: 0 0 0 0 ARMCTRL-level 43 Edge 3f004000.txp 40: 1773 0 0 0 ARMCTRL-level 48 Edge DMA IRQ 42: 11 0 0 0 ARMCTRL-level 50 Edge DMA IRQ 44: 11 0 0 0 ARMCTRL-level 52 Edge DMA IRQ 45: 0 0 0 0 ARMCTRL-level 53 Edge DMA IRQ 66: 0 0 0 0 ARMCTRL-level 74 Edge vc4 crtc 69: 0 0 0 0 ARMCTRL-level 77 Edge vc4 crtc 70: 0 0 0 0 ARMCTRL-level 78 Edge vc4 crtc 77: 20 0 0 0 ARMCTRL-level 85 Edge 3f205000.i2c, 3f804000.i2c, 3f805000.i2c 78: 6417 0 0 0 ARMCTRL-level 86 Edge 3f204000.spi 80: 237 0 0 0 ARMCTRL-level 88 Edge mmc0 81: 489 0 0 0 ARMCTRL-level 89 Edge uart-pl011 89: 0 0 0 0 bcm2836-timer 0 Edge arch_timer 90: 4048 3704 2383 1892 bcm2836-timer 1 Edge arch_timer 94: 14287 0 0 0 pinctrl-bcm2835 16 Level mcp25xxfd IPI0: 0 0 0 0 CPU wakeup interrupts IPI1: 0 0 0 0 Timer broadcast interrupts IPI2: 2361 2948 7890 1616 Rescheduling interrupts IPI3: 65 617 301 166 Function call interrupts IPI4: 0 0 0 0 CPU stop interrupts IPI5: 1 0 0 0 IRQ work interrupts IPI6: 0 0 0 0 completion interrupts Err: 0 top shows 91% for the mcp25xxfd interrupt handler, 0% for spi0 So we see that spi0 is no longer getting scheduled wasting CPU cycles There are a lot less context switches and corresponding Rescheduling interrupts All of these show that this improves efficiency of the system and reduces CPU utilization. Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: Optionally use GPIO descriptors for CS GPIOsLinus Walleij2019-01-091-10/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This augments the SPI core to optionally use GPIO descriptors for chip select on a per-master-driver opt-in basis. Drivers using this will rely on the SPI core to look up GPIO descriptors associated with the device, such as when using device tree or board files with GPIO descriptor tables. When getting descriptors from the device tree, this will in turn activate the code in gpiolib that was added in commit 6953c57ab172 ("gpio: of: Handle SPI chipselect legacy bindings") which means that these descriptors are aware of the active low semantics that is the default for SPI CS GPIO lines and we can assume that all of these are "active high" and thus assign SPI_CS_HIGH to all CS lines on the DT path. The previously used gpio_set_value() would call down into gpiod_set_raw_value() and ignore the polarity inversion semantics. It seems like many drivers go to great lengths to set up the CS GPIO line as non-asserted, respecting SPI_CS_HIGH. We pull this out of the SPI drivers and into the core, and by simply requesting the line as GPIOD_OUT_LOW when retrieveing it from the device and relying on the gpiolib to handle any inversion semantics. This way a lot of code can be simplified and removed in each converted driver. The end goal after dealing with each driver in turn, is to delete the non-descriptor path (of_spi_register_master() for example) and let the core deal with only descriptors. The different SPI drivers have complex interactions with the core so we cannot simply change them all over, we need to use a stepwise, bisectable approach so that each driver can be converted and fixed in isolation. This patch has the intended side effect of adding support for ACPI GPIOs as it starts relying on gpiod_get_*() to get the GPIO handle associated with the device. Cc: Linuxarm <linuxarm@huawei.com> Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com> Tested-by: Fangjian (Turing) <f.fangjian@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: Use of_node_name_eq for node name comparisonsRob Herring2018-12-061-1/+1
| | | | | | | | Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: add support for octal mode I/O data transferYogesh Narayan Gaur2018-12-031-2/+10
| | | | | | | | | | | | Add flags for Octal mode I/O data transfer Required for the SPI controller which can do the data transfer (TX/RX) on 8 data lines e.g. NXP FlexSPI controller. SPI_TX_OCTAL: transmit with 8 wires SPI_RX_OCTAL: receive with 8 wires Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: Fix formatting of header blockMark Brown2018-11-291-6/+4
| | | | | | | Make everything look intentional by having a C++ comment for the whole block, not just the SPDX line. Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: Fix core transfer waits after slave supportMark Brown2018-11-151-3/+5
| | | | | | | | | | | | | The refactoring done as part of adding the core support for handling waiting for slave transfer dropped a conditional which meant that we started waiting for completion of all transfers, not just those that the controller asked for. This caused hangs and massive delays on platforms that don't need the core delay. Re-add the delay to fix this. Fixes: 810923f3bf06c11 (spi: Deal with slaves that return from transfer_one() unfinished) Reported-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: Deal with slaves that return from transfer_one() unfinishedLubomir Rintel2018-11-131-23/+39
| | | | | | | | | | | | | | | Some drivers, such as spi-pxa2xx return from the transfer_one callback immediately, idicating that the transfer will be finished asynchronously. Normally, spi_transfer_one_message() synchronously waits for the transfer to finish with wait_for_completion_timeout(). For slaves, we don't want the transaction to time out as it can complete in a long time in future. Use wait_for_completion_interruptible() instead. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
* Merge remote-tracking branch 'spi/topic/of' into spi-nextMark Brown2018-10-211-2/+5
|\
| * spi: make OF helper available for othersMarco Felsch2018-09-271-2/+5
| | | | | | | | | | | | | | | | | | | | | | The of_find_spi_device_by_node() helper function is useful for other modules too. Export the funciton as GPL like all other spi helper functions and make it available if CONFIG_OF is enabled, because it isn't related to the CONFIG_OF_DYNAMIC context. Finally add a stub if CONFIG_OF isn't enabled, so others must not care about it. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
* | Merge branch 'spi-4.20' into spi-nextMark Brown2018-10-211-12/+87
|\ \
| * | spi: Make GPIO CSs honour the SPI_NO_CS flagPhil Elwell2018-10-121-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SPI configuration state includes an SPI_NO_CS flag that disables all CS line manipulation, for applications that want to manage their own chip selects. However, this flag is ignored by the GPIO CS code in the SPI framework. Correct this omission with a trivial patch. Signed-off-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | spi: Add driver_override SPI device attributeTrent Piepho2018-10-101-0/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This attribute works the same was as the identically named attribute for PCI, AMBA, and platform devices. For reference, see: commit 3cf385713460 ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'") commit 3d713e0e382e ("driver core: platform: add device binding path 'driver_override'") commit 782a985d7af2 ("PCI: Introduce new device binding path using pci_dev.driver_override") If the name of a driver is written to this attribute, then the device will bind to the named driver and only the named driver. The device will bind to the driver even if the driver does not list the device in its id table. This behavior is different than the driver's bind attribute, which only allows binding to devices that are listed as supported by the driver. It can be used to bind a generic driver, like spidev, to a device. Signed-off-by: Trent Piepho <tpiepho@impinj.com> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | spi: switch to SPDX license identifierMarco Felsch2018-09-271-10/+1
| | | | | | | | | | | | | | | | | | | | | | | | Use the appropriate SPDX license identifier and drop the previous license text. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | spi: always use software fallback for SPI_CS_WORD when using cs_gioDavid Lechner2018-09-181-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This modifies the condition for using the software fallback implementation for SPI_CS_WORD when the SPI controller is using a GPIO for the CS line. When using a GPIO for CS, the hardware implementation won't work, so we just enable the software fallback globally in this case. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | spi: add software implementation for SPI_CS_WORDDavid Lechner2018-09-171-1/+30
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a default software implementation for the SPI_CS_WORD flag for controllers that don't have such a feature. The SPI_CS_WORD flag indicates that the CS line should be toggled between each word sent, not just between each transfer. The implementation works by using existing functions to split transfers into one-word-sized transfers and sets the cs_change bit for each of the new transfers. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: Fix double IDR allocation with DT aliasesGeert Uytterhoeven2018-08-281-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the SPI bus number is provided by a DT alias, idr_alloc() is called twice, leading to: WARNING: CPU: 1 PID: 1 at drivers/spi/spi.c:2179 spi_register_controller+0x11c/0x5d8 couldn't get idr Fix this by moving the handling of fixed SPI bus numbers up, before the DT handling code fills in ctlr->bus_num. Fixes: 1a4327fbf4554d5b ("spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbersKirill Kapranov2018-08-151-0/+9
|/ | | | | | | | | | | | | | | | On systems where some controllers get a dynamic ID assigned and some have a fixed number (e.g. from ACPI tables), the current implementation might run into an IDR collision: in case of a fixed bus number is gotten by a driver (but not marked busy in IDR tree) and a driver with dynamic bus number gets the same ID and predictably fails. Fix this by means of checking-in fixed IDsin IDR as far as dynamic ones at the moment of the controller registration. Fixes: 9b61e302210e (spi: Pick spi bus number from Linux idr or spi alias) Signed-off-by: Kirill Kapranov <kirill.kapranov@compulab.co.il> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
* treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook2018-06-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
* Merge tag 'pm-4.18-rc1' of ↵Linus Torvalds2018-06-051-5/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These include a significant update of the generic power domains (genpd) and Operating Performance Points (OPP) frameworks, mostly related to the introduction of power domain performance levels, cpufreq updates (new driver for Qualcomm Kryo processors, updates of the existing drivers, some core fixes, schedutil governor improvements), PCI power management fixes, ACPI workaround for EC-based wakeup events handling on resume from suspend-to-idle, and major updates of the turbostat and pm-graph utilities. Specifics: - Introduce power domain performance levels into the the generic power domains (genpd) and Operating Performance Points (OPP) frameworks (Viresh Kumar, Rajendra Nayak, Dan Carpenter). - Fix two issues in the runtime PM framework related to the initialization and removal of devices using device links (Ulf Hansson). - Clean up the initialization of drivers for devices in PM domains (Ulf Hansson, Geert Uytterhoeven). - Fix a cpufreq core issue related to the policy sysfs interface causing CPU online to fail for CPUs sharing one cpufreq policy in some situations (Tao Wang). - Make it possible to use platform-specific suspend/resume hooks in the cpufreq-dt driver and make the Armada 37xx DVFS use that feature (Viresh Kumar, Miquel Raynal). - Optimize policy transition notifications in cpufreq (Viresh Kumar). - Improve the iowait boost mechanism in the schedutil cpufreq governor (Patrick Bellasi). - Improve the handling of deferred frequency updates in the schedutil cpufreq governor (Joel Fernandes, Dietmar Eggemann, Rafael Wysocki, Viresh Kumar). - Add a new cpufreq driver for Qualcomm Kryo (Ilia Lin). - Fix and clean up some cpufreq drivers (Colin Ian King, Dmitry Osipenko, Doug Smythies, Luc Van Oostenryck, Simon Horman, Viresh Kumar). - Fix the handling of PCI devices with the DPM_SMART_SUSPEND flag set and update stale comments in the PCI core PM code (Rafael Wysocki). - Work around an issue related to the handling of EC-based wakeup events in the ACPI PM core during resume from suspend-to-idle if the EC has been put into the low-power mode (Rafael Wysocki). - Improve the handling of wakeup source objects in the PM core (Doug Berger, Mahendran Ganesh, Rafael Wysocki). - Update the driver core to prevent deferred probe from breaking suspend/resume ordering (Feng Kan). - Clean up the PM core somewhat (Bjorn Helgaas, Ulf Hansson, Rafael Wysocki). - Make the core suspend/resume code and cpufreq support the RT patch (Sebastian Andrzej Siewior, Thomas Gleixner). - Consolidate the PM QoS handling in cpuidle governors (Rafael Wysocki). - Fix a possible crash in the hibernation core (Tetsuo Handa). - Update the rockchip-io Adaptive Voltage Scaling (AVS) driver (David Wu). - Update the turbostat utility (fixes, cleanups, new CPU IDs, new command line options, built-in "Low Power Idle" counters support, new POLL and POLL% columns) and add an entry for it to MAINTAINERS (Len Brown, Artem Bityutskiy, Chen Yu, Laura Abbott, Matt Turner, Prarit Bhargava, Srinivas Pandruvada). - Update the pm-graph to version 5.1 (Todd Brandt). - Update the intel_pstate_tracer utility (Doug Smythies)" * tag 'pm-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (128 commits) tools/power turbostat: update version number tools/power turbostat: Add Node in output tools/power turbostat: add node information into turbostat calculations tools/power turbostat: remove num_ from cpu_topology struct tools/power turbostat: rename num_cores_per_pkg to num_cores_per_node tools/power turbostat: track thread ID in cpu_topology tools/power turbostat: Calculate additional node information for a package tools/power turbostat: Fix node and siblings lookup data tools/power turbostat: set max_num_cpus equal to the cpumask length tools/power turbostat: if --num_iterations, print for specific number of iterations tools/power turbostat: Add Cannon Lake support tools/power turbostat: delete duplicate #defines x86: msr-index.h: Correct SNB_C1/C3_AUTO_UNDEMOTE defines tools/power turbostat: Correct SNB_C1/C3_AUTO_UNDEMOTE defines tools/power turbostat: add POLL and POLL% column tools/power turbostat: Fix --hide Pk%pc10 tools/power turbostat: Build-in "Low Power Idle" counters support tools/power turbostat: Don't make man pages executable tools/power turbostat: remove blank lines tools/power turbostat: a small C-states dump readability immprovement ...
| * spi: Respect all error codes from dev_pm_domain_attach()Ulf Hansson2018-05-141-5/+6
| | | | | | | | | | | | | | | | | | | | The limitation of being able to check only for -EPROBE_DEFER from dev_pm_domain_attach() has been removed. Hence let's respect all error codes and bail out accordingly. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | spi: Add missing pm_runtime_put_noidle() after failed getTony Lindgren2018-05-211-0/+1
| | | | | | | | | | | | | | | | | | If pm_runtime_get_sync() fails we should call pm_runtime_put_noidle(). This is probably not a critical fix as we should only hit this when things are broken elsewhere. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: Get rid of the spi_flash_read() APIBoris Brezillon2018-05-111-57/+0
| | | | | | | | | | | | | | | | | | | | | | | | This API has been replaced by the spi_mem_xx() one, its only user (spi-nor) has been converted to spi_mem_xx() and all SPI controller drivers that were implementing the ->spi_flash_xxx() hooks are also implementing the spi_mem ones. So we can safely get rid of this API. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@exceet.de> Tested-by: Frieder Schrempf <frieder.schrempf@exceet.de> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: Make support for regular transfers optional when ->mem_ops != NULLBoris Brezillon2018-05-111-7/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some SPI/QuadSPI controllers only expose a high-level SPI memory interface, thus preventing any regular SPI transfers from being done. In that case, SPI controller drivers can leave all ->transfer_xxx() hooks empty and only implement the spi_mem_ops interface. Adjust the core to allow such situations: - extend spi_controller_check_ops() to accept situations where all ->transfer_xxx() pointers are NULL only if ->mem_ops != NULL - make sure we do not initialize the SPI message queue if ctlr->transfer_one and ctlr->transfer_one_message are missing - return -ENOTSUPP if someone tries to do a regular SPI transfer on a controller that does not support it Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@exceet.de> Tested-by: Frieder Schrempf <frieder.schrempf@exceet.de> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: Check presence the of ->transfer[_xxx]() before registering a controllerBoris Brezillon2018-04-261-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | Right now, no checks are done on the presence of a ->transfer[_xxx]() method, which can lead to a NULL pointer dereference when someone starts sending something on the bus. Do the check at registration time and refuse to add the controller if all ->transfer[_xxx]() pointers are NULL. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: Add an helper to flush the message queueBoris Brezillon2018-04-231-0/+16
| | | | | | | | | | | | | | | | | | | | This is needed by the spi-mem logic to force all messages that have been queued before a memory operation to be sent before we start the memory operation. We do that in order to guarantee that spi-mem operations do not preempt regular SPI transfers. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: Expose spi_{map,unmap}_buf() for internal useBoris Brezillon2018-04-231-18/+7
|/ | | | | | | | | | | | | spi_{map,unmap}_buf() are needed by the spi-mem logic that is about to be introduced to prepare data buffer for DMA operations. Remove the static specifier on these functions and add their prototypes to drivers/spi/internals.h. We do not export the symbols here because both SPI_MEM and SPI can't be enabled as modules and we'd like to prevent controller/device drivers from using these functions. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
*-. Merge remote-tracking branches 'spi/fix/atmel', 'spi/fix/pxa2xx' and ↵Mark Brown2018-04-021-7/+2
|\ \ | | | | | | | | | 'spi/fix/unregiser' into spi-linus
| | * spi: Fix unregistration of controller with fixed SPI bus numberJarkko Nikula2018-03-201-7/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 9b61e302210e (spi: Pick spi bus number from Linux idr or spi alias) ceased to unregister SPI buses with fixed bus numbers. Moreover this is visible only if CONFIG_SPI_DEBUG=y is set or when trying to re-register the same SPI controller. rmmod spi_pxa2xx_platform (with CONFIG_SPI_DEBUG=y): [ 26.788362] spi_master spi1: attempting to delete unregistered controller [spi1] modprobe spi_pxa2xx_platform: [ 37.883137] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:19.0/pxa2xx-spi.12/spi_master/spi1' [ 37.894984] CPU: 1 PID: 1467 Comm: modprobe Not tainted 4.16.0-rc4+ #21 [ 37.902384] Call Trace: ... [ 38.122680] kobject_add_internal failed for spi1 with -EEXIST, don't try to register things with the same name in the same directory. [ 38.136154] WARNING: CPU: 1 PID: 1467 at lib/kobject.c:238 kobject_add_internal+0x2a5/0x2f0 ... [ 38.513817] pxa2xx-spi pxa2xx-spi.12: problem registering spi master [ 38.521036] pxa2xx-spi: probe of pxa2xx-spi.12 failed with error -17 Fix this by not returning immediately from spi_unregister_controller() if idr_find() doesn't find controller with given ID/bus number. It finds only those controllers that were registered with dynamic SPI bus numbers. Only conditional cleanup between dynamic and fixed bus numbers is to remove allocated IDR. Fixes: 9b61e302210e (spi: Pick spi bus number from Linux idr or spi alias) Cc: stable@vger.kernel.org Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: Fix scatterlist elements size in spi_map_bufMaxime Chevallier2018-03-021-2/+8
|/ | | | | | | | | | | | | | | | | | | When SPI transfers can be offloaded using DMA, the SPI core need to build a scatterlist to make sure that the buffer to be transferred is dma-able. This patch fixes the scatterlist entry size computation in the case where the maximum acceptable scatterlist entry supported by the DMA controller is less than PAGE_SIZE, when the buffer is vmalloced. For each entry, the actual size is given by the minimum between the desc_len (which is the max buffer size supported by the DMA controller) and the remaining buffer length until we cross a page boundary. Fixes: 65598c13fd66 ("spi: Fix per-page mapping of unaligned vmalloc-ed buffer") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
* Merge remote-tracking branch 'spi/topic/core' into spi-nextMark Brown2017-11-101-1/+3
|\
| * spi: document odd controller reference handlingJohan Hovold2017-10-311-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Document the fact that a reference to the controller is dropped as part of deregistration. This is an odd pattern as the reference is typically taken in __spi_alloc_controller() rather than spi_register_controller(). Most controller drivers gets it right these days and notably the device-managed interface relies on this behaviour. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbersLucas Stach2017-11-031-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | On systems where some controllers get a dynamic ID assigned and some have a fixed number from DT, the current implemention might run into an IDR collision if the dynamic controllers gets probed first and get an IDR number, which is later requested by the controller with the fixed numbering. When this happens the fixed controller will fail to register with the SPI core. Fix this by skipping all known alias numbers when assigning the dynamic IDs. Fixes: 9b61e302210e (spi: Pick spi bus number from Linux idr or spi alias) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: fix use-after-free at controller deregistrationJohan Hovold2017-10-311-2/+3
|/ | | | | | | | | | | The controller is typically freed as part of device_unregister() so store the bus id before deregistration to avoid use-after-free when the id is later released. Fixes: 9b61e302210e ("spi: Pick spi bus number from Linux idr or spi alias") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable <stable@vger.kernel.org>
* Merge tag 'acpi-4.14-rc1' of ↵Linus Torvalds2017-09-051-0/+32
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These include a usual ACPICA code update (this time to upstream revision 20170728), a fix for a boot crash on some systems with Thunderbolt devices connected at boot time, a rework of the handling of PCI bridges when setting up device wakeup, new support for Apple device properties, support for DMA configurations reported via ACPI on ARM64, APEI-related updates, ACPI EC driver updates and assorted minor modifications in several places. Specifics: - Update the ACPICA code in the kernel to upstream revision 20170728 including: * Alias operator handling update (Bob Moore). * Deferred resolution of reference package elements (Bob Moore). * Support for the _DMA method in walk resources (Bob Moore). * Tables handling update and support for deferred table verification (Lv Zheng). * Update of SMMU models for IORT (Robin Murphy). * Compiler and disassembler updates (Alex James, Erik Schmauss, Ganapatrao Kulkarni, James Morse). * Tools updates (Erik Schmauss, Lv Zheng). * Assorted minor fixes and cleanups (Bob Moore, Kees Cook, Lv Zheng, Shao Ming). - Rework the initialization of non-wakeup GPEs with method handlers in order to address a boot crash on some systems with Thunderbolt devices connected at boot time where we miss an early hotplug event due to a delay in GPE enabling (Rafael Wysocki). - Rework the handling of PCI bridges when setting up ACPI-based device wakeup in order to avoid disabling wakeup for bridges prematurely (Rafael Wysocki). - Consolidate Apple DMI checks throughout the tree, add support for Apple device properties to the device properties framework and use these properties for the handling of I2C and SPI devices on Apple systems (Lukas Wunner). - Add support for _DMA to the ACPI-based device properties lookup code and make it possible to use the information from there to configure DMA regions on ARM64 systems (Lorenzo Pieralisi). - Fix several issues in the APEI code, add support for exporting the BERT error region over sysfs and update APEI MAINTAINERS entry with reviewers information (Borislav Petkov, Dongjiu Geng, Loc Ho, Punit Agrawal, Tony Luck, Yazen Ghannam). - Fix a potential initialization ordering issue in the ACPI EC driver and clean it up somewhat (Lv Zheng). - Update the ACPI SPCR driver to extend the existing XGENE 8250 workaround in it to a new platform (m400) and to work around an Xgene UART clock issue (Graeme Gregory). - Add a new utility function to the ACPI core to support using ACPI OEM ID / OEM Table ID / Revision for system identification in blacklisting or similar and switch over the existing code already using this information to this new interface (Toshi Kani). - Fix an xpower PMIC issue related to GPADC reads that always return 0 without extra pin manipulations (Hans de Goede). - Add statements to print debug messages in a couple of places in the ACPI core for easier diagnostics (Rafael Wysocki). - Clean up the ACPI processor driver slightly (Colin Ian King, Hanjun Guo). - Clean up the ACPI x86 boot code somewhat (Andy Shevchenko). - Add a quirk for Dell OptiPlex 9020M to the ACPI backlight driver (Alex Hung). - Assorted fixes, cleanups and updates related to ACPI (Amitoj Kaur Chawla, Bhumika Goyal, Frank Rowand, Jean Delvare, Punit Agrawal, Ronald Tschalär, Sumeet Pawnikar)" * tag 'acpi-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits) ACPI / APEI: Suppress message if HEST not present intel_pstate: convert to use acpi_match_platform_list() ACPI / blacklist: add acpi_match_platform_list() ACPI, APEI, EINJ: Subtract any matching Register Region from Trigger resources ACPI: make device_attribute const ACPI / sysfs: Extend ACPI sysfs to provide access to boot error region ACPI: APEI: fix the wrong iteration of generic error status block ACPI / processor: make function acpi_processor_check_duplicates() static ACPI / EC: Clean up EC GPE mask flag ACPI: EC: Fix possible issues related to EC initialization order ACPI / PM: Add debug statements to acpi_pm_notify_handler() ACPI: Add debug statements to acpi_global_event_handler() ACPI / scan: Enable GPEs before scanning the namespace ACPICA: Make it possible to enable runtime GPEs earlier ACPICA: Dispatch active GPEs at init time ACPI: SPCR: work around clock issue on xgene UART ACPI: SPCR: extend XGENE 8250 workaround to m400 ACPI / LPSS: Don't abort ACPI scan on missing mem resource mailbox: pcc: Drop uninformative output during boot ACPI/IORT: Add IORT named component memory address limits ...
| * spi: Use Apple device properties in absence of ACPI resourcesLukas Wunner2017-08-031-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MacBooks and MacBook Pros introduced since 2015 return empty _CRS data for SPI slaves, causing device initialization to fail. Most of the information that would normally be conveyed via _CRS is available through ACPI device properties instead, so take advantage of them. The meaning and appropriate usage of the device properties was reverse engineered by Ronald Tschalär and carried over from these commits authored by him: https://github.com/cb22/macbook12-spi-driver/commit/9a416d699ef4 https://github.com/cb22/macbook12-spi-driver/commit/0c34936ed9a1 According to Ronald, the device properties have the following meaning: spiSclkPeriod /* period in ns */ spiWordSize /* in number of bits */ spiBitOrder /* 1 = MSB_FIRST, 0 = LSB_FIRST */ spiSPO /* clock polarity: 0 = low, 1 = high */ spiSPH /* clock phase: 0 = first, 1 = second */ spiCSDelay /* delay between cs and receive on reads in 10 us */ resetA2RUsec /* active-to-receive delay? */ resetRecUsec /* receive delay? */ Reported-by: Leif Liddy <leif.liddy@gmail.com> Tested-by: Ronald Tschalär <ronald@innovation.ch> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
OpenPOWER on IntegriCloud