summaryrefslogtreecommitdiffstats
path: root/drivers/serial
Commit message (Collapse)AuthorAgeFilesLines
* serial: imx.c: fix CTS trigger level lower to avoid lost charsValentin Longchamp2010-05-131-1/+9
| | | | | | | | | | | | | | | | | | The imx CTS trigger level is left at its reset value that is 32 chars. Since the RX FIFO has 32 entries, when CTS is raised, the FIFO already is full. However, some serial port devices first empty their TX FIFO before stopping when CTS is raised, resulting in lost chars. This patch sets the trigger level lower so that other chars arrive after CTS is raised, there is still room for 16 of them. Signed-off-by: Valentin Longchamp<valentin.longchamp@epfl.ch> Tested-by: Philippe Rétornaz<philippe.retornaz@epfl.ch> Acked-by: Wolfram Sang<w.sang@pengutronix.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* serial: mpc52xx_uart: fix null pointer dereferenceAnatolij Gustschin2010-05-131-1/+1
| | | | | | | | | | | | | Commit 6acc6833510db8f72b5ef343296d97480555fda9 introduced NULL pointer dereference and kernel crash on ppc32 machines while booting. Fix this bug now. Reported-by: Leonardo Chiquitto <leonardo.lists@gmail.com> Tested-by: Leonardo Chiquitto <leonardo.lists@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds2010-04-302-1/+5
|\ | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: serial: drivers/serial/pmac_zilog.c: add missing unlock serial: 8250_pnp - add Fujitsu Wacom device tty: Fix regressions in the char driver conversion
| * serial: drivers/serial/pmac_zilog.c: add missing unlockJulia Lawall2010-04-301-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In an error handling case the lock is not unlocked. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E1; identifier f; @@ f (...) { <+... * spin_lock_irqsave (E1,...); ... when != E1 * return ...; ...+> } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * serial: 8250_pnp - add Fujitsu Wacom devicePing Cheng2010-04-301-0/+2
| | | | | | | | | | | | | | | | | | | | Add Fujitsu Wacom 1FGT Tablet PC device Signed-off-by: Ping Cheng <pingc@wacom.com> Cc: stable <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2010-04-301-33/+0
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | * 'merge' of git://git.secretlab.ca/git/linux-2.6: spi: spidev_test gives error upon 1-byte transfer omap2_mcspi: small fixes of output data format omap2_mcspi: Flush posted writes spi: spi_device memory should be released instead of device. spi: release device claimed by bus_find_device_by_name of: check for IS_ERR() serial/mpc52xx_uart: Drop outdated comments gpio: potential null dereference
| * serial/mpc52xx_uart: Drop outdated commentsWolfram Sang2010-04-281-33/+0
| | | | | | | | | | | | | | | | Most things mentioned are either obsolete (platform-support) or wrong (device numbering, DCD spport) these days. The remaining rest is obvious. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2010-04-291-0/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6061/1: PL061 GPIO: Bug fix - setting gpio for HIGH_LEVEL interrupt is not working. ARM: 5957/1: ARM: RealView SD/MMC Card detection and write-protect using GPIOLIB ARM: 6030/1: KS8695: enable console ARM: 6060/1: PL061 GPIO: Setting gpio val after changing direction to OUT. ARM: 6059/1: PL061 GPIO: Changing *_irq_chip_data with *_irq_data for real irqs. ARM: 6023/1: update bcmring_defconfig to latest version and fix build error ARM: fix build error in arch/arm/kernel/process.c
| * | ARM: 6030/1: KS8695: enable consoleYegor Yefremov2010-04-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add add_preferred_console() to ks8695_console_init() to enable the console Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | m68knommu: allow 4 coldfire serial portsPhilippe De Muyter2010-04-211-1/+1
| | | | | | | | | | | | | | | | | | | | | Fix driver/serial/mcf.c for 4-ports coldfire's (e.g. MCF5484). Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* | | m68knommu: fix coldfire tcdrainPhilippe De Muyter2010-04-211-1/+3
|/ / | | | | | | | | | | | | | | | | | | | | Fix tcdrain on coldfire uarts. Currently with coldfire uarts tcdrain returns without waiting for txempty, because (tx)fifosize is 0. Fix that and call uart_update_timeout when setting the baud rate, otherwise tcdrain will wait for an half our :) Also constify mcf_uart_ops. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* | serial_cs: MD55x support (PCMCIA GPRS/EDGE modem) (kernel 2.6.33)Timur Maximov2010-04-171-0/+9
|/ | | | | | | | | | | | | | | | | | | | | | | | | | Many PCMCIA GPRS modems like: Onda Edge N100E, Novaway PC98 (OEM SPC98Z), Rovermate Edgus Adaptmate-039 and others have same construction and identification: lspcmcia -vvv Product Name: Generic Modem: MD55x 1.00 Serial number: xxxxx-xxx Identification: manf_id: 0x015d card_id: 0x4c45 function: 2 (serial) prod_id(1): "Generic" (0xc49e4731) prod_id(2): "Modem: MD55x" (0x8913b110) prod_id(3): "1.00" (0x83dbf271) prod_id(4): "Serial number: xxxxx-xxx" (0x73ee9514) Serial connection to GSM module based on Elan VPU16551 PCMCIA UART with datasheet recommeded 14.7456MHz crystal oscillator. By default serial_cs set UART clock == 1843200 Hz For correct work need set clock 14745600 Hz. This quirk already present in driver, only need add device in quirk list. Signed-off-by: Timur Maximov <xcom.org@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
* Merge branch 'master' into export-slabhTejun Heo2010-04-051-1/+3
|\
| * Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller2010-04-0327-408/+1452
| |\
| * | drivers/serial/sunsu.c: Correct use after freeJulia Lawall2010-03-291-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The of_iounmap is at the out_unmap label, but at that point up has already been freed. The free cannot be moved to the out_unmap label, because that label is reachable from cases where up should not be freed. So the call to of_iounmap is just duplicated, and the goto converted to a return. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,e; identifier f; iterator I; statement S; @@ *kfree(x); ... when != &x when != x = e when != I(x,...) S *x->f // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-3025-3/+22
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2010-03-291-0/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits) r8169: offical fix for CVE-2009-4537 (overlength frame DMAs) ipv6: Don't drop cache route entry unless timer actually expired. tulip: Add missing parens. r8169: fix broken register writes pcnet_cs: add new id bonding: fix broken multicast with round-robin mode drivers/net: Fix continuation lines e1000: do not modify tx_queue_len on link speed change net: ipmr/ip6mr: prevent out-of-bounds vif_table access ixgbe: Do not run all Diagnostic offline tests when VFs are active igb: use correct bits to identify if managability is enabled benet: Fix compile warnnings in drivers/net/benet/be_ethtool.c net: Add MSG_WAITFORONE flag to recvmmsg e1000e: do not modify tx_queue_len on link speed change igbvf: do not modify tx_queue_len on link speed change ipv4: Restart rt_intern_hash after emergency rebuild (v2) ipv4: Cleanup struct net dereference in rt_intern_hash net: fix netlink address dumping in IPv4/IPv6 tulip: Fix null dereference in uli526x_rx_packet() gianfar: fix undo of reserve() ...
| * | pcnet_cs: add new idKen Kawasaki2010-03-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | pcnet_cs: *add new id (Allied Telesis LM33-PCM-T Lan&Modem multifunction card) *use PROD_ID for LA-PCM.(because LA-PCM and LM33-PCM-T use the same MANF_ID). Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | SH: remove superfluous warning from the serial driverGuennadi Liakhovetski2010-03-231-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | This warning has been introduced during the SCI DMA support developmenr and is not needed any more. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | | SH: fix SCIFA SCASCR register bit definitionsGuennadi Liakhovetski2010-03-231-1/+5
| | | | | | | | | | | | | | | Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | | serial: sh-sci: fix SH-Mobile SH breakageMagnus Damm2010-03-231-7/+22
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The follwing commit breaks SH-Mobile on non-ARM platforms: "8a77b8d serial: sh-sci: Support ARM-based SH-Mobile CPUs." The commit assumed that CONFIG_ARCH_SHMOBILE only was set on ARM platforms, but it turns out that this kconfig is also set by all SH-based SoCs. Sh7724 and other older SH-Mobile SoCs are all broken without this fix. This patch converts the "defined(CONFIG_ARCH_SHMOBILE)" into one "defined()" per SoC model - similar to existing SH code. Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds2010-03-191-1/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: serial: sh-sci: remove duplicated #include sh: Export uncached helper symbols. sh: Fix up NUMA build for 29-bit. serial: sh-sci: Fix build failure for non-sh architectures. sh: Fix up uncached offset for legacy 29-bit mode. sh: Support CPU affinity masks for INTC controllers.
| * | serial: sh-sci: remove duplicated #includeHuang Weiyi2010-03-151-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | Remove duplicated #include('s) in drivers/serial/sh-sci.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds2010-03-191-2/+2
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty_port,usb-console: Fix usb serial console open/close regression tty: cpm_uart: use resource_size() tty_buffer: Fix distinct type warning hvc_console: Fix race between hvc_close and hvc_remove uartlite: Fix build on sparc. tty: Take a 256 byte padding into account when buffering below sub-page units Revert "tty: Add a new VT mode which is like VT_PROCESS but doesn't require a VT_RELDISP ioctl call"
| * | | tty: cpm_uart: use resource_size()Tobias Klauser2010-03-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the resource_size function instead of manually calculating the resource size. This reduces the chance of introducing off-by-one errors. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | uartlite: Fix build on sparc.David Miller2010-03-191-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We can get this driver enabled via MFD_TIMBERDALE which only requires GPIO to be on. But the of_address_to_resource() function is only present on powerpc and microblaze, so we have to conditionalize the CONFIG_OF probing bits on that. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2010-03-181-5/+5
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'merge' of git://git.secretlab.ca/git/linux-2.6: powerpc/5200: Build fix for mpc52xx watchdog timer code of: Fix comparison of "compatible" properties powerpc/52xx: update defconfigs spi/omap2_mcspi: Use transaction speed if provided spi/omap2_mcspi: fix NULL pointer dereference uartlite: Fix build on sparc.
| * | | | uartlite: Fix build on sparc.David Miller2010-03-101-5/+5
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We can get this driver enabled via MFD_TIMBERDALE which only requires GPIO to be on. But the of_address_to_resource() function is only present on powerpc and microblaze, so we have to conditionalize the CONFIG_OF probing bits on that. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds2010-03-181-1/+1
|\ \ \ \ | |_|/ / |/| | / | | |/ | |/| | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sunxvr1000: Add missing FB=y depenency. MAINTAINERS: Add entry for sparc serial drivers. drivers/serial/sunsab.c: adjust the constant used to initialize the interrupt_mask0 fields
| * | drivers/serial/sunsab.c: adjust the constant used to initialize the ↵Julia Lawall2010-03-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | interrupt_mask0 fields From: Julia Lawall <julia@diku.dk> SAB82532_ISR0_TCD is declared in drivers/serial/subsab.h as relating to a status register, while SAB82532_IMR0_TCD is declared in the same file as relating to a mask register. The latter seems more appropriate for the interrupt_mask0 field, and follows the strategy for initializing this field elsewhere in the same file. Both SAB82532_ISR0_TCD and SAB82532_IMR0_TCD have the same value. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge branch 'for-linus' of ↵Linus Torvalds2010-03-121-1/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits) doc: fix typo in comment explaining rb_tree usage Remove fs/ntfs/ChangeLog doc: fix console doc typo doc: cpuset: Update the cpuset flag file Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed Remove drivers/parport/ChangeLog Remove drivers/char/ChangeLog doc: typo - Table 1-2 should refer to "status", not "statm" tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h devres/irq: Fix devm_irq_match comment Remove reference to kthread_create_on_cpu tree-wide: Assorted spelling fixes tree-wide: fix 'lenght' typo in comments and code drm/kms: fix spelling in error message doc: capitalization and other minor fixes in pnp doc devres: typo fix s/dev/devm/ Remove redundant trailing semicolons from macros fix typo "definetly" -> "definitely" in comment tree-wide: s/widht/width/g typo in comments ... Fix trivial conflict in Documentation/laptops/00-INDEX
| * \ \ Merge branch 'for-next' into for-linusJiri Kosina2010-03-081-1/+1
| |\ \ \ | | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: Documentation/filesystems/proc.txt arch/arm/mach-u300/include/mach/debug-macro.S drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c drivers/net/typhoon.c
| | * | tree-wide: fix typos "ammount" -> "amount"Uwe Kleine-König2010-02-051-1/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | | Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2010-03-128-26/+210
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits) ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock ARM: S3C2443: Remove #if 0 for clk_mpll ARM: S3C2443: Update notes on MPLLREF clock ARM: S3C2443: Further clksrc-clk conversions ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation USB: Fix s3c-hsotg build following Samsung platform header moves ARM: S3C64XX: Reintroduce unconditional build of audio device ARM: 5961/1: ux500: fix CLKRST addresses ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted ASoC: Fix S3C64xx IIS driver for Samsung header reorg ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support [ARM] pxa: fix typo in mxm8x10.h [ARM] pxa/raumfeld: set GPIO drive bits for LED pins [ARM] pxa/zeus: Add support for mcp2515 CAN bus [ARM] pxa/zeus: Add support for onboard max6369 watchdog [ARM] pxa/zeus: Add Eurotech as the manufacturer [ARM] pxa/zeus: Correct the USB host initialisation flags [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress [ARM] pxa: refactor uncompress.h for non-PXA uarts [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs ...
| * \ \ \ Merge branch 'origin' into devel-stableRussell King2010-03-0822-480/+1664
| |\ \ \ \ | | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/mach-mx2/devices.c arch/arm/mach-mx2/devices.h sound/soc/pxa/pxa-ssp.c
| * | | | Merge branch 'for-rmk/samsung5' of git://git.fluff.org/bjdooks/linux into ↵Russell King2010-03-022-5/+16
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | devel-stable Conflicts: arch/arm/Kconfig arch/arm/Makefile
| | * | | | ARM: SAMSUNG: Fix UART number for S5P6442Ben Dooks2010-02-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent changes in the UART code mean that we need to ensure that the 4 UART case is only selected if S5PV210 is being compiled. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| | * | | | ARM: S5P6442: Add serial port supportKukjin Kim2010-02-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds UART serial port support for S5P6442. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| | * | | | ARM: SAMSUNG: Use PLAT_SAMSUNG instead of PLAT_S3CBen Dooks2010-02-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As part of the development process, it is hoped PLAT_S3C is either removed from all of the PLAT_SAMSUNG derived platforms or removed entirely. It is also better to use PLAT_SAMSUNG as this is the current base of all Samsung devices. Change the two places that use PLAT_S3C to use PLAT_SAMSUNG Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| | * | | | ARM: SAMSUNG: Add SERIAL_SAMSUNG_UARTS_4 Kconfig optionBen Dooks2010-02-031-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SERIAL_SAMSUNG_UARTS_4 to mop up the number of cases currently using four Samsung compatible UARTS. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| | * | | | ARM: S3C2412: SoC has the fractional baud rate registerMichel Pollet2010-02-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The S3C2412 has a fractional baud rate register, this patch adds the corresponding flag to the UART definition to allow generation of more precise baud rates for the various clock combinations. Signed-off-by: Michel Pollet <buserror@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| * | | | | Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6 into ↵Russell King2010-03-022-228/+16
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | devel-stable Conflicts: arch/arm/Kconfig
| | * | | | | serial: sh-sci: Support ARM-based SH-Mobile CPUs.Magnus Damm2010-02-082-9/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for ARM-based SH-Mobile CPUs to the sh-sci driver. Also remove the SCLSR register that is missing on sh772x, sh7705 and SH-Mobile. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | | | | Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Russell King2010-03-021-1/+1
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | devel-stable Conflicts: arch/arm/Makefile
| | * | | | | | imx-serial-excessive-status-clearing-on-break.patchAndy Green2010-02-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cc: Sasha Hauer <kernel@pengutronix.de> We noticed that we were only able to communicate once with a GSM module per session, if we powered down the module then the serial driver was broken until reset, no traffic or /proc/interrupts activity could be seen any more. Volker noticed it was provoked by a long "break" seen on the wire when the RX was not driven during powerdown, we discovered we could kill the serial driver just by forcing RX low extenally for a little while. I saw that the processing for BREAK in the driver gets too excited and clears down all set bits in USR2, including that a character is pending. This stops all further characters getting processed. The attached one-liner makes the serial driver immortal against BREAK. Signed-off-by: Andy Green <andy.green@txtr.com> Signed-off-by: Volker Ernst <volker.ernst@txtr.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | | | | | | Merge branch 'for-rmk' of git://git.marvell.com/orion into devel-stableRussell King2010-02-251-3/+4
| |\ \ \ \ \ \ \
| * \ \ \ \ \ \ \ Merge branch 'for-rmk' of git://git.marvell.com/orion into devel-stableRussell King2010-02-157-73/+76
| |\ \ \ \ \ \ \ \ | | |_|_|_|/ / / / | |/| | | | | / / | | | |_|_|_|/ / | | |/| | | | | Conflicts: arch/arm/Makefile
| * | | | | | | ARM: S5PV210: Add serial port supportThomas Abraham2010-01-263-1/+163
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds UART serial port support for S5PV210. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| * | | | | | | ARM: SAMSUNG: serial: Modify console initialization.Thomas Abraham2010-01-192-10/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch modifies s3c24xx_serial_initconsole function to accept multiple platform UART information structures. This is required on platforms that have differences among the instances of UART ports. As an example, the FIFO sizes could be different for each UART instance and hence multiple platform UART information structures would be needed. This patch also modifies the s3c24xx_console_init macro since it wraps the call to the s3c24xx_serial_initconsole function. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| * | | | | | | ARM: S5P6440: Add serial port supportKukjin Kim2010-01-151-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds UART serial port support for S5P6440 CPU. Most of the serial support of Samsung's 6400 CPU is reused for 6440 CPU. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
OpenPOWER on IntegriCloud